Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISTORTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

The Optical Field Angle Distortion Calibration of HST Fine Guidance Sensors 1R and 3

To date five OFAD (Optical Field Angle Distortion) calibrations have been performed with a star field in M35, four on FGS3 and one on FGS1, all analyzed by the Astrometry Science Team. We have recently completed an improved FGS1R OFAD calibration. The ongoing Long Term Stability Tests have also been analyzed and incorporated into these calibrations, which are time-dependent due to on-orbit changes in the FGS. Descriptions of these tests and the results of our OFAD modeling are given. Because all OFAD calibrations use the same star field, we calibrate FGS 1 and FGS 3 simultaneously. This increases the precision of our input catalog,resulting in an improvement in both the FGS 1 and FGS 3 calibrations. A redetermination of the proper motions,using 12 years of HST data has significantly improved our calibration. Residuals to our OFAD modeling indicate that FGS 1 will provide astrometry superior to FGS 3 by approx. 20%. Past and future FGS astrometric science supported by these calibrations is briefly reviewed.

McArthur, B.↗

Weaving and bonding method to prevent warp and fill distortion

A method to prevent fiber distortion in textile materials employed in a modified weaving process. In a first embodiment, a tacifier in powder form is applied to the yarn and melted while on the fabric. Cool air is then supplied after the tacifier has melted to expedite the solidification of the tacifier. In a second embodiment, a solution form of a tacifier is used by dissolving the tacifier into a solvent that has a high evaporation rate. The solution is then sprayed onto the fabric or fill yarn as each fill yarn is inserted into a shed of the fabric. A third embodiment applies the tacifier in a liquid form that has not been dissolved in a solvent. That is, the tacifier is melted and is sprayed as a liquid onto the fabric or fill yarn as it is being extracted from a fill yarn spool prior to the fill yarn being inserted into the shed of the fabric. A fourth embodiment employs adhesive yarns contained as an integral part of the warp or fill yarn. Additional tacifier material is not required because a matrix is used as the tacifier. The matrix is then locally melted using heating elements on clamping bars or take-up rollers, is cooled, if necessary, and solidified.

Farley, Gary L.↗

Bonding Thin Mirror Segments Without Distortion for the International X-Ray Observatory

The International X-Ray Observatory (IXO) uses thin glass optics to maximize large effective area and precise low angular resolution. The thin glass mirror segments must be transferred from their fabricated state to a permanent structure without imparting distortion. IXO will incorporate about fourteen thousand thin mirror segments to achieve the mission goal of 3.0 square meters of effective area at 1.25 keV with an angular resolution of five arcseconds. To preserve figure and alignment, the mirror segment must be bonded with sub-micron movement at each corner. Recent advances in technology development have produced significant x-ray test results of a bonded pair of mirrors. Three specific bonding cycles will be described highlighting the improvements in procedure, temperature control, and precision bonding. This paper will highlight the recent advances in alignment and permanent bonding as well as the results they have produced.

Evans, Tyler C.↗

An Active Heater Control Concept to Meet IXO Type Mirror Module Thermal-Structural Distortion Requirement

Flight mirror assemblies (FMAs) of large telescopes, such as the International X-ray Observatory (IXO), have very stringent thermal-structural distortion requirements. The spatial temperature gradient requirement within a FMA could be as small as 0.05 C. Con ventionally, heaters and thermistors are attached to the stray light baffle (SLB), and centralized heater controllers (i.e., heater controller boards located in a large electronics box) are used. Due to the large number of heater harnesses, accommodating and routing them is extremely difficult. The total harness length/mass is very large. This innovation uses a thermally conductive pre-collimator to accommodate heaters and a distributed heater controller approach. It minimizes the harness length and mass, and reduces the problem of routing and accommodating them. Heaters and thermistors are attached to a short (4.67 cm) aluminum portion of the pre-collimator, which is thermally coupled to the SLB. Heaters, which have a very small heater power density, and thermistors are attached to the exterior of all the mirror module walls. The major portion (23.4 cm) of the pre-collimator for the middle and outer modules is made of thin, non-conductive material. It minimizes the view factors from the FMA and heated portion of the precollimator to space. It also minimizes heat conduction from one end of the FMA to the other. Small and multi-channel heater controllers, which have adjustable set points and internal redundancy, are used. They are mounted to the mechanical support structure members adjacent to each module. The IXO FMA, which is 3.3 m in diameter, is an example of a large telescope. If the heater controller boards are centralized, routing and accommodating heater harnesses is extremely difficult. This innovation has the following advantages. It minimizes the length/mass of the heater harness between the heater controllers and heater circuits. It reduces the problem of routing and accommodating the harness on the FMA. It reduces the risk of X-ray attenuation caused by the heater harness. Its adjustable set point capability eliminates the need for survival heater circuits. The operating mode heater circuits can also be used as survival heater circuits. In the non-operating mode, a lower set point is used.

Choi, Michael↗

Geomagnetic Field Distortion by a Solar Stream as a Mechanism for the Production of Polar Aurora and Electrojets

This paper describes a mechanism for charge separation in the geomagnetically trapped radiation which may account for some observed phenomena associated with the polar aurora and the electrojet current systems. The following development is proposed: given that there exist eastward or westward longitudinal gradients in the geomagnetic field resulting from distortion of the geomagnetic field by solar streams, if the trapped radiation is adiabatic in character, radial drift separation of positive and negative charged particles must occur. It follows that, for bounded or irregular distributions of plasma number density in such an adiabatic - drift region, electric fields will arise. The origin of such electric fields will not arrest the drift separation of the charged particles, but will contribute to exponential growth of irregularities in the trapped plasma density. An adiabatic acceleration mechanism is described, which is based on incorporating the electrostatic energy of the particle in the energy function for the particle. Direct consequences of polarization of the geomagnetically trapped radiation will be the polar electrojet current systems and the polar aurora.

Kern, J. W.↗

Experimental Evaluation of Inlet Distortion on an Ejector Powered Hybrid Wing Body at Take-off and Landing Conditions

As part of the NASA Environmentally Responsible Aircraft project, an ultra high bypass ratio engine integration on a hybrid wing body demonstration was planned. The goal was to include engine and airframe integration concepts that reduced fuel consumption by at least 50% while still reducing noise 42 db cumulative on the ground. Since the engines would be mounted on the upper surface of the aft body of the aircraft, the inlets may be susceptible to vortex ingestion from the wing leading edge at high angles of attack and sideslip, and separated wing/body flow. Consequently, experimental and computational studies were conducted to collect flow surveys useful for characterizing engine operability. The wind tunnel tests were conducted at two NASA facilities, the 14- by 22-foot at NASA Langley and the 40- by 80-foot at NASA Ames Research Center. The test results included in this paper show that the distortion and pressure recovery levels were acceptable for engine operability. The CFD studies conducted to compare to experimental data showed excellent agreement for the angle of attacks examined, although failed to match the low speed experimental data at high sideslip angles.

Carter, Melissa B.↗

Distorted Perovskites for High Voltage Dielectric Capacitors

There are several mechanisms which have been proposed for the existence of colossal dielectric constant in the class of perovskite calcium copper titanate (CaCu3Ti4O12 or CCTO) materials. Researches indicate that existence of twinning parallel to (100) (001) and (010) planes causes planar defects and causes changes in local electronic structure. This change can cause insulating barriers locally which contribute to the large dielectric values irrespective of processing. The combination of insulating barriers, defects and displacements caused by twinning have been attributed to the generation of large dielectric constant in CCTO. To examine some of these arguments some researchers replaced Ca with other elements and evaluated this concept. In this study we present the synthesis and characterization of Ga2/3Cu3Ti4O12-xNx (GCTON) material. This provides both distortion due to atomic size difference and defects due to insertion of nitrogen. The morphology of the compound was determined to show that processing has tremendous effect on the dielectric values. The resistivity of GCTON was several order higher than CCTO and dielectric constant was higher than 10,000.

Gill, Puneet↗

A Thermal Review of the Sample Cartridge Assembly (SCA) Gravitational Effect of Distortion in Sintering (GEDS) Experiment Flight Processing

NASA’s Sample Cartridge Assembly (SCA) first flight experiment, Gravitational Effect of Distortion in Sintering (GEDS), was processed on the International Space Station (ISS) between 2019 and 2020. The SCA was heated in the European Space Agency’s (ESA) Low Gradient Furnace (LGF) that is housed inside the Material Science Research Rack (MSRR) located in the U.S. Laboratory Module. This summary will give a review of the design and flight experiment development for the GEDS SCA. It describes flight processing and the role of thermal engineering support. Lessons learned and future Principle Investigators (PI) will be discussed.

Micro-gravity Science↗

A Thermal Review of the Sample Cartridge Assembly (SCA) Gravitational Effect of Distortion in Sintering (GEDS) Experiment Flight Processing

NASA’s Sample Cartridge Assembly (SCA) first flight experiment, Gravitational Effect of Distortion in Sintering (GEDS), was processed on the International Space Station (ISS) between 2019 and 2020. The SCA was heated in the European Space Agency’s (ESA) Low Gradient Furnace (LGF) that is housed inside the Material Science Research Rack (MSRR) located in the U.S. Laboratory Module. This summary will give a review of the design and flight experiment development for the GEDS SCA. It describes flight processing and the role of thermal engineering support. Lessons learned and future Principle Investigators (PI) will be discussed.

MIcro-gravity Science↗

Calibrating Optical Distortions in the Solar Orbiter SPICE Spectrograph

The Spectral Imaging of the Coronal Environment (SPICE) instrument on Solar Orbiter is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths from 70.4-79.0 nm and 97.3-104.9 nm. A single-mirror off-axis paraboloid focuses the solar image onto the entrance slit of the spectrometer section. A Toroidal Variable Line Space (TVLS) grating images the entrance slit onto a pair of MCP-intensified APS detectors. Ray-tracing analysis prior to launch showed that the instrument was subject to a number of small image distortions which need to be corrected in the final data product. We compare the ray tracing results with measurements made in flight. Co-alignment with other telescopes on Solar Orbiter will also be examined.

Therese Ann Kucera↗

Correlation of Canopy Distortion with Asymmetric Loading in Large Diameter Ringsail Parachutes

The second generation of the main parachutes for the Orion Capsule Parachute Assembly System (CPAS) were subjected to multiple flight tests. Three of the tests included were instrumented with the Tension Measuring System (TMS) to record main dispersion bridle loads. While these units were not able to resolve the individual suspension line loads, they were able to record a course representation of the asymmetric loading of the main parachutes during inflation. These tests were also equipped with upward looking cameras mounted on the test vehicles to collect detailed imagery of main deployment and inflation. When analyzed independently, both data sources exhibit similar features. These similarities provide evidence that the suspension line loads and the distortions in the canopy geometry are not independent. This paper will examine both data sources simultaneously to establish a correlation between asymmetric loading at the canopy skirt and the deformations of the canopy. This correlation will be used to build a model which can estimate individual suspension line loads from a measured riser load and detailed imagery.

Parachutes↗

Distortion of Perceived Visual Space after Eccentric Gaze Holding

Previous studies have shown that rebound nystagmus can be a behavioral probe into the adaptive properties of the gaze-holding mechanism, showing that after prolonged eccentric gaze holding and upon return to central gaze the eye tends to drift towards the previously held position. It is not known whether perception of visual space is also affected by similar adaptation mechanisms. The current study seeks to elucidate if eccentric gaze holding changes the perception of space in a relative spatial judgment task. To measure their spatial bias, twelve subjects were asked to report which among two short vertical lines flashed to the left or to the right of the display was closer to a third central line. Perception was assessed after holding eccentric gaze at 40 degrees towards the left or right and compared with control trials without eccentric gaze holding. Subjects showed a significant difference in spatial bias between the leftward and rightward gaze holding conditions (p = 0.04), suggesting that the visual space changes differently with respect to the side where gaze was held. While we did not observe an overall bias (p = 0.327) under no gaze holding we did observe a significant correlation between handedness and spatial bias (r2 = 0.4, p = 0.04). We conclude that gaze holding temporarily distorts the perception of space in a mechanism that may be related to the adaptation of the gaze holding mechanism.

perception↗

Performance Characteristics of a Boundary Layer Ingesting Inlet - Distortion Tolerant Fan Through CFD Code Coupling

A method of constructing a high-fidelity simulation using two NASA CFD codes, Launch Ascent and Vehicle Aerodynamics (LAVA), which is the general-purpose solver, and a turbomachinery specific code NASA-TURBO (TURBO), will be presented. Validation of the code coupling is performed through comparison to experimental data obtained in the 2017 wind tunnel test of NASA’s Boundary Layer Ingesting Inlet - Distortion Tolerant Fan (BLI2DTF). For the simulation, the external flow field is computed by LAVA utilizing a steady-state Reynolds-averaged Navier-Stokes (RANS) methodology. Data from LAVA is exchanged with TURBO, which simulated the propulsor utilizing an unsteady-RANS methodology. A sensitivity analysis is performed using averaged and instantaneous data transfer between the two codes, as well as varying the amount of simulation time TURBO computes between updates. The results of the coupled simulations appear to replicate the BLI2DTF experiment correctly. Static pressure taps leading into and around the nacelle, total pressure ratio and efficiency of the propulsor, and profiles of total temperature, pressure, and Mach number at the rear measurement plane, aft of the propulsor, are in good agreement with experimental data. These results provide confidence that the coupled simulation is behaving in a physically realizable manner.

CFD↗

X-ray Diffuse Scattering Study of Local Distortions in Fe1+xTe Induced by Excess Fe

We report x-ray diffuse scattering studies of the iron chalcogenide Fe{sub 1+x}Te as a function of doping and temperature for x = 0.03, 0.08, and 0.12. In all cases, remarkably strong, characteristic diffuse scattering is observed. This scattering extends throughout the Brillouin zone and exhibits a nonmonotonic decay away from the fundamental Bragg peaks, with a peaklike structure at a reduced q {approx} (0.3,0,0.6). We interpret this scattering as Huang diffuse scattering resulting from distortions induced by the interaction between the excess Fe and the FeTe layers. The form of the scattering indicates that this interaction is strong and extends a number of unit cells away from the interstitial Fe site. Further, the diffuse scattering shows a sudden decrease on cooling through the structural and magnetic phase transition, reflecting the first-order change of the electronic structure of FeTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic soft modes in the distorted triangular antiferromagnet -CaCr2O4

-CaCr2O4 is a spin-3/2, distorted triangular lattice antiferromagnet with a simple 120 spin structure that masks the complex pattern of exchange interactions. The magnetic excitation spectrum has been measured using inelastic neutron scattering on powder and single crystal samples. It reveals unusual low energy modes which can be explained by linear spin-wave theory assuming nearest and next-nearest neighbor interactions. The mode softening is due to the next-nearest neighbor interactions and indicates a new magnetic phase nearby as revealed by the phase diagram constructed for this system. The extracted direct exchange interactions correlate well with the Cr3+{Cr3+ distances and are in agreement with other chromium oxide delafossite compounds.

Toth, Sandor↗