Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIRECT REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Purification of Zirconium Tetrachloride (ZrCl{sub 4}) from UNF Cladding - A Progress Report

Zirconium-based cladding materials that surround used nuclear fuel (UNF) rods represent a significant fraction of the total amount of high level waste that must be disposed of in long term geological repositories. The decontamination and/or recovery and reuse of these materials would significantly reduce the amount of high level waste associated with light water nuclear energy reactors and could provide a new source of hafnium free zirconium for the fabrication of new nuclear components. A step in a strategy to recycle zirconium from used cladding materials is the direct, high yield chlorination reaction that produces zirconium tetrachloride (ZrCl{sub 4}). The ZrCl{sub 4} so obtained is contaminated with other metal chloride species (FeCl{sub 3}, NbCl{sub 5}, NbOCl{sub 3}, SnCl{sub 4}, CsCl, SbCl{sub 5}, etc.) that originate from the alloying metals present initially as well as contaminants from oxide layers on the cladding, trace fission products, fuel residues, activation byproducts, and tritium. The suggested strategy to remove the metal chloride impurities is based on sublimation at atmospheric pressure combined with chemical treatments influencing volatility of the impurities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water-gas Shift Reaction on oxide/Cu(111): Rational Catalyst Screening from Density Functional Theory

Developing improved catalysts based on a fundamental understanding of reaction mechanism has become one of the grand challenges in catalysis. A theoretical understanding and screening the metal-oxide composite catalysts for the water-gas shift (WGS) reaction is presented here. Density functional theory was employed to identify the key step for the WGS reaction on the Au, Cu-oxide catalysts, where the calculated reaction energy for water dissociation correlates well with the experimental measured WGS activity. Accordingly, the calculated reaction energy for water dissociation was used as the scaling descriptor to screen the inverse model catalysts, oxide/Cu(111), for the better WGS activity. Our calculations predict that the WGS activity increases in a sequence: Cu(111), ZnO/Cu(111) < TiO{sub 2}/Cu(111), ZrO{sub 2}/Cu(111) < MoO{sub 3}/Cu(111). Our results imply that the high performances of Au, Cu-oxide nanocatalysts in the WGS reaction rely heavily on the direct participation of both oxide and metal sites. The degree that the oxide is reduced by Cu plays an important role in determining the WGS activity of oxide/Cu catalysts. The reducible oxide can be transformed from the fully oxidized form to the reduced form due to the interaction with Cu and, therefore, the transfer of electron density from Cu, which helps in releasing the bottleneck water dissociation and, therefore, facilitating the WGS reaction on copper.

30 DIRECT ENERGY CONVERSION↗

Probing the dynamics and bottleneck of the key atmospheric SO 2 oxidation reaction by the hydroxyl radical

SO 2 (Sulfur dioxide) is the major precursor to the production of sulfuric acid (H 2 SO 4 ), contributing to acid rain and atmospheric aerosols. Sulfuric acid formed from SO 2 generates light-reflecting sulfate aerosol particles in the atmosphere. This property has prompted recent geoengineering proposals to inject sulfuric acid or its precursors into the Earth’s atmosphere to increase the planetary albedo to counteract global warming. SO 2 oxidation in the atmosphere by the hydroxyl radical HO to form HOSO 2 is a key rate-limiting step in the mechanism for forming acid rain. However, the dynamics of the HO + SO 2 → HOSO 2 reaction and its slow rate in the atmosphere are poorly understood to date. Herein, we use photoelectron spectroscopy of cryogenically cooled HOSO 2 – anion to access the neutral HOSO 2 radical near the transition state of the HO + SO 2 reaction. Spectroscopic and dynamic calculations are conducted on the first ab initio-based full-dimensional potential energy surface to interpret the photoelectron spectra of HOSO 2 – and to probe the dynamics of the HO + SO 2 reaction. In addition to the finding of a unique pre-reaction complex (HO⋯SO 2 ) directly connected to the transition state, dynamic calculations reveal that the accessible phase space for the HO + SO 2 → HOSO 2 reaction is extremely narrow, forming a key reaction bottleneck and slowing the reaction rate in the atmosphere, despite the low reaction barrier. This study underlines the importance of understanding the full multidimensional potential energy surface to elucidate the dynamics of complex bimolecular reactions involving polyatomic reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Forced cocurrent smoldering combustion

An analytical model of cocurrent smoldering combustion through a very porous solid fuel is developed. Smoldering is initiated at the top of a long radially insulated uniform fuel cylinder, so that the smolder wave propagates downward, opposing an upward-forced flow of oxidizer, with the solid fuel and the gaseous oxidizer entering the reaction zone from the same direction (hence, cocurrent). Radiative heat transfer was incorporated using a diffusion approximation, and smoldering was modeled using a one-step reaction mechanism. The results indicate that, for a given fuel, the final temperature depends only on the initial oxygen mass flux, increasing logarithmically with the mass flux. The smolder velocity is linearly dependent on the initial oxygen mass flux, and, at a fixed value of the flux, increases with initial oxygen mass fraction. The mathematical relationship determining the conditions for steady smolder propagation is presented.

Dosanjh, Sudip S.↗

Mixing and non-equilibrium chemical reaction in a compressible mixing layer

The effects of compressibility, chemical reaction exothermicity, and non-equilibrium chemical modeling in a reacting plane mixing layer were investigated by means of two dimensional direct numerical simulations. The chemical reaction was irreversible and second order of the type A + B yields Products + Heat. The general governing fluid equations of a compressible reacting flow field were solved by means of high order finite difference methods. Physical effects were then determined by examining the response of the mixing layer to variation of the relevant non-dimensionalized parameters. The simulations show that increased compressibility generally results in a suppressed mixing, and consequently a reduced chemical reaction conversion rate. Reaction heat release was found to enhance mixing at the initial stages of the layer growth, but had a stabilizing effect at later times. The increased stability manifested itself in the suppression or delay of the formation of large coherent structures within the flow. Calculations were performed for a constant rate chemical kinetics model and an Arrhenius type kinetic prototype. The choice of the model was shown to have an effect on the development of the flow. The Arrhenius model caused a greater temperature increase due to reaction than the constant kinetic model. This had the same effect as increasing the exothermicity of the reaction. Localized flame quenching was also observed when the Zeldovich number was relatively large.

Steinberger, Craig J.↗

Molten fluid electrode apparatus

A battery includes negative electrode material and positive electrode material where the materials are in a solid phase except for selected portions that are heated to transform the selected portions into a fluid. The fluid portion of negative electrode material is directed to a negative electrode region of a reaction chamber and the fluid portion of positive electrode material is directed to a positive electrode region of the reaction chamber where a solid electrolyte containing ions of the negative electrode separates the positive electrode region from the negative electrode region.

Vissers, Daniel R.↗

Microwave-Assisted Conversion of 1,6-Hexanediol into Polycarbonate

The conversion of carbon dioxide into higher value chemicals is a viable way to support sustainability and net-zero economy goals. Of the different CO2 conversion routes, direct conversion offers a simplified process, lower reaction temperatures, and thus low energy input. Alcohols can be directly combined with CO2 to produce polycarbonates, e.g., DMC (dimethyl carbonate) formation from methanol and CO2. Recently CO2 and 1,6-hexanediol were shown to convert into poly(hexamethylene carbonate)diol using an atmospheric flow based process in single step. For these conversions, CeO2-based catalysts are widely used due to the abundance of oxygen vacancies that are believed to be the active sites for this reaction. Microwave (MW) heating is a unique approach that can provide selective volume-based heating and enhanced reaction rates and/or selectivities. For the current work, CO2 and diol conversion into polymers were investigated on different CeO2 catalysts under microwave heating and the performance was compared against conventional heating. The reaction products were analyzed using infrared spectroscopy (IR) and nuclear magnetic resonance (NMR) spectroscopy. Preliminary results showed microwaves irradiation produced faster rates of polycarbonate production as evidenced by IR data.

Kanitkar, Swarom↗

Transfer and breakup of light weakly-bound nuclei

We investigate the origin of the effects observed in the fusion cross section of light weakly bound nuclei, through a review of the most recent experimental and theoretical works. In particular we focus on the well-documented fusion suppression at energies just above the potential barrier. We show that, besides the couplings to the breakup process, effects due to the couplings to transfer need be taken into account. The magnitude of the cross section for the direct process, breakup or transfer, is not a reliable indicator of the size of the effects induced on the elastic scattering and fusion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of Ne 20 ( p , γ ) Na 21 cross sections from E p = 500 - 2000 keV

Background: The reaction 20 Ne(p,γ) 21 Na influences the nucleosynthesis of Ne, Na, and Mg isotopes while contributing to hydrogen burning in several stellar sites, such as red giants, asymptotic giant branch (AGB) stars, massive stars, and oxygen-neon (ONe) novae. In the relevant temperature range for these environments (T = 0.05–0.5 GK), the main contributions to this reaction rate are from the direct capture process as well as the high-energy tail of a subthreshold resonance in the ground-state transition at E x = 2425 keV in the 21 Na compound nucleus. Purpose: The previous measurement of this reaction reports cross sections with large uncertainties for the ground-state transition. At higher energies, where the subthreshold resonance makes a smaller contribution to the total cross section, only upper limits are provided. This work aims to reduce the uncertainty in the cross section where direct capture dominates, as well as provide cross-section data in previously unmeasured regions. Method: The 20 Ne (p, γ) 21 Na reaction was measured over a wide proton energy range (E p = 0.5–2.0 MeV) at θ lab = 90°. Transitions to the ground state and to the 332 and 2425 keV excited states were observed. The primary transitions to these three bound states were utilized in an R -matrix analysis to determine the contributions of the direct capture and the subthreshold resonance to the total cross section. Results: The cross sections of the present measurements have been found to be in good agreement with the previous data at low energy. Significantly improved cross-section measurements have been obtained over the E p = 1300–1900 keV region. The narrow resonance at E c.m. = 1113 keV (E x = 3544.3 keV) has also been remeasured and its strength has been found to be in good agreement with previous measurements. Conclusions: An extrapolation of the S factor of 20 Ne (p, γ) 21 Na has been made to low energies using the R -matrix fit. The reaction rate from the subthreshold resonance was found to be the main contributor to the reaction rate at temperatures below about 0.1 GK. The present rate is lower in the temperature range of interest than those presented in current reaction rate libraries by up to 20%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The effect of spin-orbit splitting on the association kinetics of barrierless halogen atom-hydrocarbon radical reactions.

The effect of the geometry dependence of spin-orbit splitting on transition state theory (TST) predictions for radical-radical recombination rate coefficients is examined. The effects are illustrated with direct ab initio variable-reaction-coordinate (VRC)-TST calculations for the reactions of two types of hydrocarbon radicals (R = CH{sub 3} and CH{sub 2}CHCH{sub 2}) with three halogen atoms (X = F, Cl, and Br). These halogen atoms exhibit a range of spin-orbit interaction strengths, while their interactions with the two hydrocarbon radicals exhibit a range of attractiveness. The transition state dividing surfaces for these barrierless reactions occur over a range of R-X fragment separations ({approx}3-7 {angstrom}) where the magnitude of the spin-orbit splitting is strongly geometry dependent. Perturbative models for incorporating the energetic effect of spin-orbit splitting into barrierless kinetics are presented and tested. Simply neglecting the variation in the spin-orbit splitting is demonstrated to contribute an error of less than 15% to the predicted rate coefficients for all but the CH{sub 2}CHCH{sub 2} + Br reaction, where its neglect increases the rate by up to a factor of 2. For the CH{sub 2}CHCH{sub 2} + Br reaction, the effect of spin-orbit splitting is not perturbative and instead qualitatively changes the long-range interaction potential and association dynamics. The present theoretical predictions are compared with available experimental measurements and previous theoretical work. For the CH{sub 3} + F association reaction, the errors associated with limitations in the basis set and in the active space are studied, and a detailed comparison is made between VRC-TST and rigid rotor-harmonic oscillator variational TST.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lowest l=0 proton resonance in {sup 26}Si and implications for nucleosynthesis of {sup 26}Al

Using a beam of the radioactive isotope {sup 25}Al, produced with the new RESOLUT facility, we measured the direct (d,n) proton-transfer reaction leading to low-lying proton resonances in {sup 26}Si. We observed the lowest l=0 proton resonance, identified with the 3{sup +} state at 5.914-MeV excitation energy. This result eliminates the largest uncertainty in astrophysical reaction rates involved in the nucleosynthesis of {sup 26}Al.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of non-premixed turbulent reacting flows

Studies of chemical reactions occurring in turbulent flows are important in the understanding of combustion and other applications. Current numerical methods are limited in their applications due to the numerical resolution required to completely capture all length scales, but, despite the fact that realistic combustion cannot be solved completely, numerical simulations can be used to give insight into the interaction between the processes of turbulence and chemical reaction. The objective was to investigate the effects of turbulent motion on the effects of chemical reaction to gain some insight on the interaction of turbulence, molecular diffusion, and chemical reaction to support modeling efforts. A direct turbulence simulation spectral code was modified to include the effects of chemical reaction and applied to an initial value problem of chemical reaction between non-premixed species. The influence of hydrodynamics on the instantaneous structure of the reaction was investigated. The local scalar dissipation rates and the local reaction rates were examined to determine the influence of vorticity or rate of strain on the reaction and the structure of the scalar field.

Leonard, Andy D.↗

Strong Metal–Support Interactions between Copper and Iron Oxide during the High‐Temperature Water‐Gas Shift Reaction

Abstract The commercial high‐temperature water‐gas shift (HT‐WGS) catalyst consists of CuO‐Cr 2 O 3 ‐Fe 2 O 3 , where Cu functions as a chemical promoter to increase the catalytic activity, but its promotion mechanism is poorly understood. In this work, a series of iron‐based model catalysts were investigated with in situ or pseudo in situ characterization, steady‐state WGS reaction, and density function theory (DFT) calculations. For the first time, a strong metal‐support interaction (SMSI) between Cu and FeO x was directly observed. During the WGS reaction, a thin FeO x overlayer migrates onto the metallic Cu particles, creating a hybrid surface structure with Cu‐FeO x interfaces. The synergistic interaction between Cu and FeO x not only stabilizes the Cu clusters, but also provides new catalytic active sites that facilitate CO adsorption, H 2 O dissociation, and WGS reaction. These new fundamental insights can potentially guide the rational design of improved iron‐based HT‐WGS catalysts.

Zhu, Minghui↗

Dendrite Growth Morphology Modeling in Liquid and Solid Electrolytes

The main goal of this project is to develop a multi-scale modeling approach that connects micron-scale phase-field models and atomic-scale density functional theory (DFT)-based simulations via parameter- and relationship-passing in order to predict Li-metal dendrite morphology evolution, in both liquid and solid electrolytes. The key hypothesis of the DFT-informed phase-field multiscale modeling approach is that it can capture the electrochemical-mechanical driving forces and incorporate the roles of nano-meter-thin solid electrolyte interphase (SEI) in liquid electrolytes as well as of the microstructures of micro-meter-thick solid electrolytes (SEs) for all-solid-state batteries. In this project, we have formulated and implemented phase-field models to incorporate the electrochemical driving forces in liquid electrolytes and then incorporate mechanical driving forces to simulate dendrite growth in solid electrolytes with resolved microstructures. We have implemented two treatments for the SEI: an explicit model to include the microstructure of the SE or SEI in the phase field model and an implicit model to simulate the impact of nano-meter thick SEI in liquid electrolytes by varying the electrode/electrolyte interfacial properties. The key interfacial properties, including the electronic and ionic transport properties, the charge transfer reaction kinetics, and mechanical properties, were computed by DFT-based calculations. At the DFT-based model, one key advancement is to directly predict the charge transfer reaction kinetics at a complex Li/SEI/electrolyte interface by linking DFT with density functional tight binding (DFTB) calculations. As the main accomplishments, we have demonstrated two successful predictions in both solid electrolyte and liquid electrolyte based on this multiscale approach. The predicted intergranular Li dendrite growth in LLZO revealed the importance of trapped electrons at internal interfaces in the microstructure of LLZO. The predicted electroplating morphology of mossy Li and faceted Mg agreed well with experiments. The insights provided by the multiscale model and the model enabled electrolyte and SEI design will accelerate the development of Li-metal electrode for high energy density batteries, that meet DOE’s target on cell density (>350 Wh/kg) and cost below $100/kWhuse for EV applications.

25 ENERGY STORAGE↗

Assessment of reaction-rate predictions of a collision-energy approach for chemical reactions in atmospheric flows.

A recently proposed approach for the Direct Simulation Monte Carlo (DSMC) method to calculate chemical-reaction rates is assessed for high-temperature atmospheric species. The new DSMC model reproduces measured equilibrium reaction rates without using any macroscopic reaction-rate information. Since it uses only molecular properties, the new model is inherently able to predict reaction rates for arbitrary non-equilibrium conditions. DSMC non-equilibrium reaction rates are compared to Park's phenomenological nonequilibrium reaction-rate model, the predominant model for hypersonic-flow-field calculations. For near-equilibrium conditions, Park's model is in good agreement with the DSMC-calculated reaction rates. For far-from-equilibrium conditions, corresponding to a typical shock layer, significant differences can be found. The DSMC predictions are also found to be in very good agreement with measured and calculated non-equilibrium reaction rates, offering strong evidence that this is a viable and reliable technique to predict chemical reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of fusion reaction history in inertially confined burning plasmas

Direct evidence of inertially confined fusion ignition appears in the abrupt temperature increase and consequent rapid increase in the thermonuclear burn rate as seen in the reaction history. The Gamma Reaction History (GRH) and Gas Cherenkov Detector (GCD) diagnostics are γ-based Cherenkov detectors that provide high quality measurements of deuterium–tritium fusion γ ray production and are, thus, capable of monitoring the thermonuclear burn rate. Temporal shifts in both peak burn time and burn width have been observed during recent high-yield shots (yields greater than 1017 neutrons) and are essential diagnostic signatures of the ignition process. While the current GRH and GCD detectors are fast enough to sense the changes of reaction history due to alpha heating, they do not have enough dynamic range to capture the onset of alpha heating. The next generation of instrumentation, GRH-15m, is proposed to increase the yield-rate coverage to measure the onset of alpha-heating.

42 ENGINEERING↗

Reaction Pathways and Kinetics for Selective Catalytic Reduction (SCR) of Acidic NO x Emissions from Power Plants with NH 3

We report that selective catalytic reduction (SCR) of NO x with NH 3 by supported vanadium oxide catalysts is an important technology for reducing acidic NO x emissions from stationary sources and mobile diesel vehicles. However, rational design of improved catalysts is still hampered by a lack of consensus about reaction pathways and kinetics of this critical technology. The SCR fundamentals were resolved by applying multiple time-resolved in situ spectroscopies (ultraviolet–visible light (UV-vis), Raman and temperature-programmed surface reaction (TPSR)) and isotopically labeled molecules ( 18 O 2 , H 2 18 O, 15 N 18 O, ND 3 ). Finally, this series of experiments directly revealed that the SCR reaction occurs at surface V 5+ O 4 sites that are maintained in the oxidized state by O 2 and the rate-determining step involves the reduction of V 5+ O 4 sites by NO and NH 3 , specifically the breaking of N–H bonds during the course of formation or decomposition of the NO–NH 3 intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗