Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DFT Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Optimizing dicyandiamide pretreatment conditions for enhanced structure and electronic properties of polymeric graphitic carbon nitride

Graphitic carbon nitride, a polymeric semiconductor, possesses a distinctive electronic band structure and exceptional chemical stability, making it a highly promising material for various catalytic applications such as electrocatalysis, photocatalysis, and photo-electrocatalysis. However, its practical applications remain limited due to its low active site density and poor electrical conductivity. In this study, to overcome such limitations, we have conducted a thorough investigation to explore the impact of dicyandiamide (DCDA) precursor pretreatment prior to thermal polymerization to graphitic carbon nitride. The DCDA precursor was subjected to various pretreatment methods including grinding using mortar and pestle, recrystallization through stirring or probe sonication after dissolving in deionized water, and freeze drying, prior to thermal polymerization at 550 °C for 2 hours. The structural and morphological properties of the catalysts prepared were compared and characterized by X-ray diffraction (XRD), attenuated total reflectance–Fourier transform infrared (ATR-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis while the electronic band gap properties were determined based on density functional theory (DFT) calculations for a set of crystalline systems having C/N ratios similar to those identified experimentally. In comparison to direct thermal polymerization, pretreated samples rendered the same product yield, diverse morphologies with flat or wrinkle structures, and reduced electrochemical resistance, making them suitable for use in various catalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Early-stage oxidation and subsequent damage of the used nuclear fuel extractant TODGA; electron pulse radiolysis and theoretical insights

Radiation induced damage of extractant molecules is a well-known phenomenon responsible for reducing efficiency and increasing the waste and cost of reprocessing used nuclear fuel (UNF). As such, understanding early-stage (pico- to nanoseconds) radiation-induced reaction mechanisms is essential for informing the design of next generation extractants with enhanced radiation robustness. Here, in this work, we utilized picosecond and nanosecond electron pulse radiolysis experiments to probe the early-stage radioactive environment experienced by the organic phase extractant N,N,N',N'-tetraoctyldiglycolamide (TODGA), proposed for separating highly radioactive trivalent minor actinides (specifically americium and curium) from the trivalent lanthanides. Using comparisons to the similar ionization potential (IP) solute p-xylene, this work determined the mechanism of reaction with the ionized diluent (i.e., n-dodecane radical cation, DD˙ + ) is hole transfer to produce TODGA˙ + . At high TODGA concentrations (>100 mM), the majority of this transfer occurs faster than 10 ps via the capture of DD˙ + holes prior to their solvation with a C 37 = 300 mM. The surviving solvated holes were captured with k = (2.38 ± 0.15) × 10 10 M -1 s -1 . Attempts at subsequent hole transfer to lower IP solutes found that only 10% of holes were transferred, indicating bond rupture of TODGA˙ + occurs within 2.6 ns at 200 mM TODGA. Possible reaction pathways for the rapid decomposition of TODGA˙ + were explored using a combination of experiments and density functional theory (DFT) calculations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Local order, disorder, and everything in between: using 91 Zr solid-state NMR spectroscopy to probe zirconium-based metal–organic frameworks

Characterization of metal centers in metal–organic frameworks (MOFs) is critical for rational design and further understanding of structure–property relationships. The short-range structure about Zr atoms is challenging to properly elucidate in many Zr MOFs, particularly when local disorder is present. Static 91 Zr solid-state NMR spectra of the seven zirconium MOFs UiO-66, UiO-66-NH 2 , UiO-67, MOF-801, MOF-808, DUT-68 and DUT-69 have been acquired at high magnetic fields of 35.2 T and 19.6 T, yielding valuable information on the local structure, site symmetry and order about Zr. 91 Zr NMR is very sensitive to differences in MOF short-range structure caused by guest molecules, linker substitution and post-synthetic treatment. Complementary density functional theory (DFT) calculations assist in the interpretation and assignment of 91 Zr solid-state NMR spectra, lend insight into structural origins of 91 Zr NMR parameters and enable determination of local Zr coordination environments. This approach can be extended to many other materials containing zirconium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Vibrational properties of heme-nitrosoalkane complexes in comparison with those of their HNO analogs, and reactivity studies towards nitric oxide and Lewis acids

C-Nitroso compounds (RNO, R = alkyl and aryl) are byproducts of drug metabolism and bind to heme proteins, and their heme-RNO adducts are isoelectronic to ferrous nitroxyl (NO-/HNO) complexes. Importantly, heme-HNO compounds are key intermediates in the reduction of NO to N 2 O and nitrite to ammonium in the nitrogen cycle. Ferrous heme-RNO complexes act as stable analogs of these species, potentially allowing for the investigation of the vibrational and electronic properties of unstable heme-HNO intermediates. In this paper, a series of six-coordinate ferrous heme-RNO complexes (where R = iPr and Ph) were prepared using the TPP 2- and 3,5-Me-BAFP 2- co-ligands, and tetrahydrofuran, pyridine, and 1-methylimidazole as the axial ligands (bound trans to RNO). These complexes were characterized using different spectroscopic methods and X-ray crystallography. The complex [Fe(TPP)(THF)(iPrNO)] was further utilized for nuclear resonance vibrational spectroscopy (NRVS), allowing for the detailed assignment of the Fe–N(R)O vibrations of a heme-RNO complex for the first time. The vibrational properties of these species were then correlated with those of their HNO analogs, using DFT calculations. Our studies support previous findings that RNO ligands in ferrous heme complexes do not elicit a significant trans effect. In addition, the complexes are air-stable, and do not show any reactivity of their RNO ligands towards NO. So although ferrous heme-RNO complexes are suitable structural and electronic models for their HNO analogs, they are unsuitable to model the reactivity of heme-HNO complexes. We further investigated the reaction of our heme-RNO complexes with different Lewis acids. Here, [Fe(TPP)(THF)(iPrNO)] was found to be unreactive towards Lewis acids. In contrast, [Fe(3,5-Me-BAFP)(iPrNO) 2 ] is reactive towards all of the Lewis acids investigated here, but in most cases the iron center is simply oxidized, resulting in the loss of the iPrNO ligand. In the case of the Lewis acid B 2 (pin) 2 , the reduced product [Fe(3,5-Me-BAFP)(iPrNH 2 )(iPrNO)] was identified by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of gadolinium doping on structural, optical, and electronic properties of polymeric graphitic carbon nitride

Polymeric graphitic carbon nitride (gCN) materials have received great attention in the fields of photo and electrocatalysis due to their distinct properties in metal-free systems with high physicochemical stability. Nevertheless, the activity of undoped gCN is limited due to its relatively low specific surface area, low conductivity, and poor dispersibility. Doping Gd atoms in a gCN matrix is an efficient strategy to fine-tune its catalytic activity and its electronic structure. Herein, the influence of various wt% of gadolinium (Gd) doped in melon-type carbon nitride was systematically investigated. Gadolinium-doped graphitic carbon nitride (GdgCN) was synthesized by adding gadolinium nitrate to dicyandiamide during polymerization. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results revealed that the crystallinity and the morphological properties are influenced by the % of Gd doping. Furthermore, X-ray photoelectron spectroscopy (XPS) studies revealed that the gadolinium ions bonded with nitrogen atoms. Complementary density functional theory (DFT) calculations illustrate possible bonding configurations of Gd ions both in bulk material and on ultrathin melon layers and provide evidence for the corresponding bandgap modifications induced by gadolinium doping.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Experimental trends and theoretical descriptors for electrochemical reduction of carbon dioxide to formate over Sn-based bimetallic catalysts

The electrochemical carbon dioxide reduction reaction (CO 2 RR) using renewable energy sources is a promising solution for mitigating CO 2 emissions. In particular, CO 2 RR to formate represents a commercially profitable target. However, a comprehensive understanding of the catalytic mechanisms of Sn-based catalysts under reaction conditions, including the real-time structural evolution of catalysts and the role of all key reaction intermediates in influencing the CO 2 RR selectivity, is still lacking. The current study reports a framework to study the selectivity preference of Sn-based bimetallic catalysts using a combination of electrochemical measurements, in situ characterization, and density functional theory (DFT) calculations. The addition of a second metal (Co, Ni, Ag, Zn, Ga, Bi) was found to play a vital role in affecting the CO 2 RR performance. In situ X-ray absorption near edge structure (XANES) measurements revealed a dynamic evolution in the Sn valence state induced by different secondary metals. A multidimensional descriptor involving all the key reaction intermediates was developed to assess formate selectivity using a 2-dimensional volcano plot. Finally, this research offers an effective framework for understanding CO 2 RR catalytic selectivity by considering both the real-time structural evolution of catalysts and all the key intermediates involved.

58 GEOSCIENCES↗
DOE OSTI2024

New Ultrafast Scintillators with Core Valence Luminescence: Cs 2 MgCl 4 and Cs 3 MgCl 5

Future experiments in high energy physics and medical imaging require radiation detectors having properties which are not presently available. The main limitations arise from lack of suitable scintillation crystals. This dilemma prompts the need for research leading to the discovery of new fast and bright scintillator materials that combine unique properties to fulfil modern experiment requirements without compromises. In this work, single crystals of Cs 2 MgCl 4 and Cs 3 MgCl 5 up to 12 mm in diameter are grown via the vertical Bridgman method. Scintillation properties are reported for the first time, and core valence luminescence is observed for both compounds. X-ray excited radioluminescence emission of Cs 2 MgCl 4 is centered at 295 nm, with a scintillation decay time of 2.25 ± 0.05 ns and relatively high core-valence light yield of 2,200 ± 110 ph/MeV. Cs 3 MgCl 5 has two main emission peaks centered at 242 nm and 302 nm, decay time of 1.46 ± 0.05 ns, and light yield of 1,340 ± 70 ph/MeV. The better coincidence time resolution (CTR) is obtained with Cs 2 MgCl 4 , which is measured to be 129 ± 4 ps FWHM. Density functional theory (DFT) calculations are also performed and provide supporting evidence that the observed scintillation originates from core valence luminescence. Furthermore, the combination of speed and brightness of these new scintillators could be useful for fast timing applications in which moderately dense materials are required.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Boron monoxide is a one-dimensional polymer

It was recently reported that boron monoxide (BO) is formed through the cross-linking of B 4 O 2 structural building units. Multiple theoretical phases agree with this description. Using pycnometry, multidimensional 17 O NMR spectroscopy, and plane-wave DFT calculations we determined the likely polymorph to be a one-dimensional polymer initially proposed in 1955.

Thuma, Joseph F. [Iowa State Univ., Ames, IA (Unit↗
DOE OSTI2025

Effect of heteroatom incorporation on electronic communication in metal chalcogenide nanoclusters

Metal chalcogenide nanoclusters (NC), specifically of type TM 6 E 8 (L) 6 (TM = transition metal, E = chalcogen, L = ligand) have garnered attention in recent years as promising catalysts and biosensors due to their remarkable electronic and magnetic properties, as well as their ability to undergo supramolecular assembly into 2D materials. Furthermore, the undercoordinated metal chalcogenide NCs have shown distinct surface reactivity, which is strongly dependent on the composition of the TM core. The differences in the reactivity of the undercoordinated species have been attributed to differences in ligand binding energies. Although ligand binding energies in homometallic NCs have been extensively studied, little is known about the effect of heteroatoms in the core on the strength of ligand binding in metal chalcogenide NCs. In this work, we provide new insights into this topic by examining the relative stability of [Co 6−x Fe x S 8 (PEt 3 ) 6 ] + (x = 0–6) NCs towards fragmentation using collision energy-resolved collision-induced dissociation (CID) experiments. We observe that the ligand binding energy gradually decreases until four Fe atoms are incorporated into the cluster core and then gradually increases until all the Co atoms are replaced with Fe. This experimental trend was compared with the results of density functional theory (DFT) calculations, which indicate drastic differences in the electronic communication between Co and Fe atoms in the TM core. By understanding the effect of heteroatom incorporation on ligand binding energy to the NC core, our work provides important insights into the effect of atom-by-atom substitution on the functional properties of tunable nanostructures.

Havenridge, Shana [Argonne National Laboratory (AN↗
DOE OSTI2025

Exploring Cs 2 AgIn x Bi 1− x Cl 6 double perovskites for optoelectronics: insights from theoretical and photophysical approaches

Lead-free halide double perovskites (HDPs) have become attractive materials for optoelectronic applications owing to their nontoxicity, structural stability, and germane photoelectric properties. In this work, we report the synthesis of high-quality In-alloyed Cs 2 AgIn x Bi (1−x) Cl 6 nanocrystals (NCs) using the antisolvent recrystallization method and comprehensively investigate the effects of In alloying on the structural, morphological, optoelectronic, and temperature-dependent photoluminescence (TDPL) properties using the state-of-the-art experimental and computational tools. Both XRD and Raman spectroscopy analyses confirmed the synthesis of highly crystalline Cs 2 AgIn x Bi (1−x) Cl 6 materials, which exhibited cubic morphology, as confirmed by TEM analysis. Room-temperature photoluminescence (PL) measurements revealed a drastic increase in the intensity above 75% In concentration with dual emission, whereas the time-resolved PL (TR-PL) results show an increase in the average lifetime values with an increase in In content, suggesting that the materials have excellent optical properties and hence are suitable candidates for optoelectronics. The TDPL measurements revealed the smallest Huang–Rhys factor (18.6) for the Cs 2 AgIn x Bi (1−x) Cl 6 (x = 0.9) sample, indicating weak exciton–phonon coupling in this composition. When deployed in the fabrication of a photodetector device, the Cs 2 AgIn x Bi (1−x) Cl 6 (x = 0.9) sample exhibited significantly enhanced photoresponsivity and a faster response time, confirming its potential for photodetector applications. Complementary DFT calculations showed that In alloying modifies the band structure of Cs 2 AgIn x Bi (1−x) Cl 6 . Our results provide valuable insights for designing multifunctional Cs 2 AgIn x Bi (1−x) Cl 6 -based materials for next-generation energy and optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2025

Strain-driven oxygen vacancy ordering in LaNiO 3 thin films revealed by integrated differential phase contrast imaging in scanning transmission electron microscopy

Rare-earth nickelates, such as LaNiO 3 (LNO), exhibit complex electronic properties, with ordered oxygen vacancies (OOV) influencing conductivity and magnetic behavior. We investigate the structural stability of strain-induced OOV phases in LNO thin films grown on SrTiO 3 substrates and the impact of Ruddlesden–Popper (RP) faults. Using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and integrated differential phase contrast (iDPC) STEM imaging, we conducted atomic-scale structural and compositional analyses of OOV. Geometric phase analysis (GPA) was employed to measure the strain in fault-free and RP fault regions, while density functional theory (DFT) calculations explored different OOV arrangements in the LNO phase. Simulated iDPC-STEM imaging of energy-stabilized structures was performed to correlate with experimental results. Here, our findings reveal superstructure modulation in the chemical composition and atomic-scale lattice structure in LNO, primarily due to the formation of the OOV in Ni–O layers of the LaNiO 2.5 phase. The out-of-plane compressive strain of about 2% stabilizes this phase, reducing the strain, diminishing OOV, and transforming them into LNO.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dicopper( i ) complexes of a binucleating, dianionic, naphthyridine bis(amide) ligand

The dinucleating ligand, 1,8-naphthyridine-2,7-bis(2,6-diisopropylphenyl)carboxamide (NBDA), was synthesized by palladium-catalyzed aminocarbonylation. This ligand was treated with two equivalents of mesitylcopper(I) in the presence of [nBu4N]X (X = Cl, N3) to give the anionic complexes [nBu4N][Cu2(NBDA)(μ-Cl)] and [nBu4N][Cu2(NBDA)(μ-N3)]. Treatment of H2NBDA with mesitylcopper(I) and two equivalents of xylyl isocyanide led to the formation of a charge-neutral dicopper(I) complex, [Cu2(NBDA)(CNXyl)2], displaying two isocyanide ligands, each terminally bound to one of the copper atoms. The complexes were characterized by NMR and IR spectroscopy, as well as by single-crystal X-ray diffraction analysis. Electrochemical characterization of the complexes using cyclic voltammetry revealed a reversible ligand-based reduction between -1.65 and -2.0 V vs. Fc/Fc+. DFT calculations suggest a more ionic bonding character and weaker Cu-Cu interactions in the NBDA complexes compared to those with other 1,8-naphthyridine-based ligands. This is congruent with intermetallic separations of over 3 Å induced by relatively strong coordination of the copper atoms to the amide nitrogen donor atoms observed in the solid state molecular structures.

Sévery, Laurent↗
DOE OSTI2026

Luminescent N-heterocyclic carbene Cu( I ) complexes with N^O chelating ligands exhibit microsecond lifetimes and photocatalytic activity

To replace precious noble metal-based photosensitizers in applications involving photoinduced charge separation, energy transfer, or photocatalysis, Cu(I) complexes are considered to be cost-effective, earth-abundant, and sustainable alternatives. An emerging and effective design principle in Cu(I) photosensitizers involves heteroleptic structures where the HOMO and LUMO are spatially separated over two different ligands. In the present work, we introduce a complementary class of heteroleptic, three-coordinate copper photosensitizers that pairs variable N^O chelating ligands (8-hydroxyquinoline and 10-hydroxybenzo[h]quinoline) with a bulky 2,6-diisopropylphenyl-substituted N-heterocyclic carbene (NHC). In this design, both frontier orbitals are localized on the same ligand, the N^O chelate, such that structural modulation of the electron-rich N^O-chelates can substantially tune the energy levels of the HOMO and LUMO, thereby controlling the photoluminescence properties. Detailed photophysical and electrochemical experiments as well as DFT calculations suggest charge-transfer transitions with intra-ligand charge transfer (ILCT) character, involving the N^O ligands. This strategy successfully produced long triplet excited-state lifetimes (up to 44 µs) in compounds that are strong photoreductants (E([Cu] + /*[Cu] as negative as −2.0 V vs. the ferrocenium/ferrocene couple). These properties allow these photosensitizers to be used as photocatalysts in various transformations of organic compounds, such as hydrogenation of substituted benzophenones, hydrodehalogenation of aryl/alkyl halides (including challenging C–Cl bond activation) and E/Z isomerization of (E)-stilbene (an example of triplet–triplet energy transfer).

Chakraborty, Soumi [University of Houston, TX (Uni↗