Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Command”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Prediction of Viking lander camera image quality

Formulations are presented that permit prediction of image quality as a function of camera performance, surface radiance properties, and lighting and viewing geometry. Predictions made for a wide range of surface radiance properties reveal that image quality depends strongly on proper camera dynamic range command and on favorable lighting and viewing geometry. Proper camera dynamic range commands depend mostly on the surface albedo that will be encountered. Favorable lighting and viewing geometries depend mostly on lander orientation with respect to the diurnal sun path over the landing site, and tend to be independent of surface albedo and illumination scattering function. Side lighting with low sun elevation angles (10 to 30 deg) is generally favorable for imaging spatial details and slopes, whereas high sun elevation angles are favorable for measuring spectral reflectances.

Huck, F. O.↗

Automatic documentation system extension to multi-manufacturers' computers and to measure, improve, and predict software reliability. Appendix A and B

A manual which explains how to use the DOMONIC command language is presented. The manual consists of the following sections: 1. Introduction 2. What You Must Know to Use DOMONIC 3. Functions of DOMONIC 4. Entering and Manipulating Data 5. Templates and Data Definitions 6. Recipes and Document Generation 7. Initiating A Project and 8. Entering and Changing Security Controls. The first four sections must be known by all DOMONIC users. Sections five, seven and eight describe functions normally used only by project management. Section six tells how to generate documents. The manual specifies what commands to use in performing each of the functions mentioned above.

Simmons, D. B.↗

Apollo experience report guidance and control systems

The Apollo guidance and control systems for both the command module and the lunar module are described in a summary report. General functional requirements are discussed, and general functional descriptions of the various subsystems and their interfaces are provided. The differences between the original in-flight maintenance concept and the final lunar-orbital-rendezvous concept are discussed, and the background in philosophy, the system development, and the reasons for the change in concept are chronologically presented. Block diagrams showing the command module guidance and control system under each concept are included. Significant conclusions and recommendations contained in more detailed reports on specific areas of the guidance and control systems are included.

Wilson, R. E., Jr.↗

Computer program for single input-output, single-loop feedback systems

Additional work is reported on a completely automatic computer program for the design of single input/output, single loop feedback systems with parameter uncertainly, to satisfy time domain bounds on the system response to step commands and disturbances. The inputs to the program are basically the specified time-domain response bounds, the form of the constrained plant transfer function and the ranges of the uncertain parameters of the plant. The program output consists of the transfer functions of the two free compensation networks, in the form of the coefficients of the numerator and denominator polynomials, and the data on the prescribed bounds and the extremes actually obtained for the system response to commands and disturbances.

Source record↗

Digital adaptive control of a VTOL aircraft

A technique has been developed for calculating feedback and feedforward gain matrices that stabilize a VTOL aircraft while enabling it to track input commands of forward and vertical velocity. Leverrier's algorithm is used in a procedure for determining a set of state variable, feedback gains that force the closed loop poles and zeroes of one pilot input transfer function to be at preselected positions in the s plane. This set of feedback gains is then used to calculate the feedback and feedforward gains for the velocity command controller. The method is computationally attractive since the gains are determined by solving systems of linear, simultaneous equations. Responses obtained using a digital simulation of the longitudinal dynamics of the CH-47 helicopter are presented.

Reid, G. F.↗

The Lockheed alternate partial polarizer universal filter

A tunable birefringent filter using an alternate partial polarizer design has been built. The filter has a transmission of 38% in polarized light. Its full width at half maximum is .09A at 5500A. It is tunable from 4500 to 8500A by means of stepping motor actuated rotating half wave plates and polarizers. Wave length commands and thermal compensation commands are generated by a PPD 11/10 minicomputer. The alternate partial polarizer universal filter is compared with the universal birefringent filter and the design techniques, construction methods, and filter performance are discussed in some detail. Based on the experience of this filter some conclusions regarding the future of birefringent filters are elaborated.

Title, A. M.↗

HOME - An application of fault-tolerant techniques and system self-testing

Hard Over Monitoring Equipment (HOME) has been designed to complement and enhance the flight safety of a flight research helicopter. HOME is an independent, highly reliable, and fail-safe special purpose computer that monitors the flight control commands issued by the flight control computer of the helicopter. In particular, HOME detects the issuance of a hazardous hard-over command for any of the four flight control axes and transfers the control of the helicopter to the flight safety pilot. The design of HOME incorporates certain reliability and fail-safe enhancement design features, such as triple modular redundancy, majority logic voting, fail-safe dual circuits, independent status monitors, in-flight self-test, and a built-in preflight exerciser. The HOME design and operation is described with special emphasis on the reliability and fail-safe aspects of the design.

Holden, D. G.↗

Evaluating a CRT map predictor for airborne use

Six airline pilots participated in a fixed-base simulator experiment designed to study the advantages and disadvantages of incorporating a simple horizontal flight-path predictor on both fixed and rotating electronic CRT map displays. The pilots were asked to fly a modified 'figure eight' ground track while attempting to maintain constant altitude. All flight information was displayed on one 17-in. (43-cm) CRT monitor. The controlled variables were the map orientation, pilots, presence or absence of crosswinds, presence or absence of wind gusts, and presence or absence of predictor. Error scores were recorded as deviations from the commanded ground track and altitude. It was found that the predictor reduced deviations from the commanded ground track, narrowed performance differences among pilots, narrowed the error differences found with and without crosswinds, and decreased pilot work load.

Baty, D. L.↗

A real-time control system with video feedback for sounding rocket payloads

NASA/Ames has developed a command system to control the attitude of a rocket payload from a ground-based site. The SPARCS command system allows a ground-based operator to adjust the attitude of a solar experiment in real time. The attitude relative to the desired target features on the sun is monitored visually from the ground through a video link using an on-board TV camera. The system has demonstrated rapid acquisition of solar features, resulting in a more optimal usage of the data gathering time of a sounding rocket payload, and has located solar features which could not be precisely located from preflight data.

Matsumoto, T.↗

Generalization and refinement of an automatic landing system capable of curved trajectories

Refinements in the lateral and longitudinal guidance for an automatic landing system capable of curved trajectories were studied. Wing flaps or drag flaps (speed brakes) were found to provide faster and more precise speed control than autothrottles. In the case of the lateral control it is shown that the use of the integral of the roll error in the roll command over the first 30 to 40 seconds of flight reduces the sensitivity of the lateral guidance to the gain on the azimuth guidance angle error in the roll command. Also, changes to the guidance algorithm are given that permit pi-radian approaches and constrain the airplane to fly in a specified plane defined by the position of the airplane at the start of letdown and the flare point.

Sherman, W. L.↗

Implementation of Large Scale Integrated (LSI) circuit design software

Portions of the Computer Aided Design and Test system, a collection of Large Scale Integrated (LSI) circuit design programs were modified and upgraded. Major modifications were made to the Mask Analysis Program in the form of additional operating commands and file processing options. Modifications were also made to the Artwork Interactive Design System to correct some deficiencies in the original program as well as to add several new command features related to improving the response of AIDS when dealing with large files. The remaining work was concerned with updating various programs within CADAT to incorporate the silicon on sapphire silicon gate technology.

Kuehlthau, R. L.↗

Study and development of techniques for automatic control of remote manipulators

An overall conceptual design for an autonomous control system of remote manipulators which utilizes feedback was constructed. The system consists of a description of the high-level capabilities of a model from which design algorithms are constructed. The autonomous capability is achieved through automatic planning and locally controlled execution of the plans. The operator gives his commands in high level task-oriented terms. The system transforms these commands into a plan. It uses built-in procedural knowledge of the problem domain and an internal model of the current state of the world.

Shaket, E.↗

An automated consultant for MACSYMA

A consultant is necessary whenever on is faced with a problem solving situation in a domain one does not fully understand. The lack of knowledge may be incidental, as it is when the domain or device is fairly simple but time constraints make it impossible for the user to learn all that is necessary. Computer systems like MACSYMA in which the level of commands is so close to the level of the task environment that the user is apt to confuse a simply defined procedure (like COEFF) with its mathematical counterpart (here coefficient) that it at best approximates. A computer program is described which has the capability of conversing with its user in English about a difficulty he has encountered, and providing information tailored to his need. The MACSYMA Advisor is a program distinct from MACSYMA with its own separate data base and expertise. For convenience the program can be called directly from MACSYMA and can access the user's data structures contained therein. The Advisor described here deals only with the "straightline" or nested use of MACSYMA commands and not loops or user-defined functions. The implementation of the Advisor relies heavily on an explict, internal "model" of the user's state of knowledge, his goals, and his "plan" for achieving them.

Genesereth, M. R.↗

Multipurpose Interactive NASA Information Systems (MINIS)

The Multipurpose Interactive NASA Information System was developed to provide remote, interactive information retrieval capability for various types of data bases to be processed on different types of small and medium size computers. Use of the system for three different data bases is decribed: (1) LANDSAT photo look-up, (2) land use, and (3) census/socioeconomic. Each of the data base elements is shown together with other detailed information that a user would require to contact the system remotely, to transmit inquiries on commands, and to receive the results of the queries or commands.

Source record↗

Longitudinal handling qualities during approach and landing of a powered lift STOL aircraft

Longitudinal handling qualities evaluations were conducted on the Ames Research Center Flight Simulator for Advanced Aircraft (FSAA) for the approach and landing tasks of a powered lift STOL research aircraft. The test vehicle was a C-8A aircraft modified with a new wing incorporating internal blowing over an augmentor flap. The investigation included: (1) use of various flight path and airspeed control techniques for the basic vehicle; (2) assessment of stability and command augmentation schemes for pitch attitude and airspeed control; (3) determination of the influence of longitudinal and vertical force coupling for the power control; (4) determination of the influence of pitch axis coupling with the thrust vector control; and (5) evaluations of the contribution of stability and command augmentation to recovery from a single engine failure. Results are presented in the form of pilot ratings and commentary substantiated by landing approach time histories.

Franklin, J. A.↗

Distribution of control decisions in remote manipulation

The particular characteristics of the problem of distributing control decisions between man and computer in remotely controlled manipulation are discussed. State of the art is reviewed from two viewpoints: (1) specifications of both control commands and control context of sensor signals the operator inputs to the manipulator control computer; (2) operations the manipulator control computer performs on operator commands and realtime sensor signals to control the manipulator for a specified task. JPL breadboard systems, system components, and control experiments are described related to the development and evaluation of manipulator control systems with capabilities of distributing control decisions between man and computer.

Bejczy, A. K.↗

Digital controllers for VTOL aircraft

Using linear-optimal estimation and control techniques, digital-adaptive control laws have been designed for a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. Two distinct discrete-time control laws are designed to interface with velocity-command and attitude-command guidance logic, and each incorporates proportional-integral compensation for non-zero-set-point regulation, as well as reduced-order Kalman filters for sensor blending and noise rejection. Adaptation to flight condition is achieved with a novel gain-scheduling method based on correlation and regression analysis. The linear-optimal design approach is found to be a valuable tool in the development of practical multivariable control laws for vehicles which evidence significant coupling and insufficient natural stability.

Stengel, R. F.↗

User's guide for SFTRAN/360

Extension and improvements made to SFTRAN, a structured-programming language are discussed. This improved language is implemented as a precompiler that translates from SFTRAN to FORTRAN. The SFTRAN language and its use are described. Time-Sharing System (TSS) command procedures were implemented that eliminate the complications of dealing with extra files and processing steps which the use of a precompiler would otherwise require. These command procedures are described and their use is illustrated by examples.

Fessler, T. E.↗