Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Capacitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Precision high energy liner implosion experiments PHELIX [1]

This paper describes the hardware design of a small megajoule sized transformer coupled pulse power system utilized to drive hydrodynamic liner experiments with a nominal current capability of 10 megAmperes. The resulting liner velocities and characteristics provide properties of physics interest. The capacitor banks utilize the ''Atlas'' plastic cased 60 kV, 60 kJ capacitors [2] and railgaps [3]. The air insulated marx'S are configured to dive a multi-filar toroidal transformer. The 4:1 multi-filar toroidal transformer is mechanically part of a circular disc line and this feature results in an attractive inductance budget. Because of the compact size, re-usable transformer, and resulting low maintenance cost, shot rates can be high compared to other ''large'' machines or explosively driven hydrodynamic methods. The PHELIX modeling, construction status, and test results will also be provided.

42 ENGINEERING↗

Preliminary Results of a 10 kJ Z-Pinch

Preliminary results obtained on 10 kJ Z-pinch device developed at the Plasma and Electrical Discharge Laboratory in the University of Castilla-La Mancha are presented. The device called ENERGU-1 is composed by 8 capacitors (0.5 {mu}F, 75 kV, 20 nH) connected in parallel to a discharge chamber by means of one high power plane transmission line by mean of 8 spark-gaps switches triggered by a 100 kV, 13 ns trigger pulse. The discharge chamber is a cylindrical Pyrex glass tube externally surrounded by a SF{sub 6} isolation atmosphere with the electrodes at the ends. Two different chambers have been studied by discharging the capacitor bank energy in deuterium for optimizing the D-D nuclear fusion reactions: one of 100 mm long by 100 mm inner diameter and the other of the same length and 70 mm inner diameter. Several sequences of ultrahigh speed converter camera photography (5 ns) are presented showing the implosion of plasma columns for different deuterium pressure and currents. Preliminary measurements of integrated 2.45 MeV neutron emissions by a silver activated neutron counter are analyzed as a function of electrical and constructive parameters. A yield of 10{sup 7}-10{sup 8} D-D fusion reactions by shot is reported when the optimum conditions are reached conducting currents of 400-600 kA with a plasma column lifetime above 100 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Pore Morphology on the Electrochemical Properties of Electric Double Layer Carbon Cryogel Supercapacitors

In this study, a group of carbon cryogels have been synthesized using resorcinol formaldehyde as precursors, and altered via catalysis and activation, to obtain varied nanostructures and pore size distributions. To understand the relation between structure and electrochemical properties, an alternate approach to de Levi's cylindrical pore, transmission line method was utilized. Using electrochemical impedance spectroscopy, the capacitor can be studied as a dielectric system composed of a porous electrode and the electrolyte (tetraethylammonium tetrafluoroborate in propylene carbonate). The complex capacitance and power are used to study the behavior of the system below the relaxation frequency f{sub 0} ({var_phi} = -45{sup o}). Therefore, the relaxation of the capacitor system at the low frequency range, f<f{sub 0}, may be used as a measure of pore/electrolyte interaction. The approach proposed here also allows for a direct experimental characterization of the capacitance and power at low frequencies, where small pores are likely to affect the diffusion kinetics and dynamics of the electrolyte molecules. The results suggest a correlation between the occurrence of small micropores and that of high power losses that are related to the resistive element at the low frequency range. Moreover, the impact of the micropore structure on the supercapacitor's performance is apparent in its capacitance and energy as well. In addition to the complex power and capacitance, other measurements including nitrogen physisorption, cyclic voltammetry, galvanic cycling, and x-ray Raman scattering were used to characterize the samples and support these results.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Frequency Upshift and Radiation of the THz Electromagnetic Wave via an Ultrashort-Laser-Produced Ionization Front

We report the generation of radiation in the terahertz (THz) spectral region from an electrostatic field converted by a laser-produced relativistic ionization front. The THz radiation is generated through spatiotemporal change in electron density induced by a relativistic ionization front propagating in a ZnSe crystal enclosed in a capacitor array. The measured central radiation frequency is 1.2 THz with a bandwidth of 0.7 THz (FWHM), which is attributed to production of an electron density of the order of 10{sup 15} cm{sup -3}. The amplitude of the linearly polarized THz radiation increased linearly with the voltage applied to the capacitors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination and enhancement of the capacitance contributions in carbon nanotube based electrode systems

We characterize the methodology of, and a possible way to enhance, the capacitance of carbon nanotube (CNT) electrode based electrochemical capacitors. Argon irradiation was used to controllably incorporate extrinsic defects into CNTs and increase the magnitude of both the pseudocapacitance and double-layer capacitance by as much as 50% and 200%, respectively, compared to untreated electrodes. Our work has implications in analyzing the prospects of CNT based electrochemical capacitors, through investigating ways and means of improving their charge storage capacity and energy density.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of the energetic parameters of a theta pinch

This work is devoted to study experimentally the performance of a theta pinch when the number of capacitors and turns of magnetic coil and the diameter of the glass tube are changed. To model the theta pinch a simple RLC circuit is used and the measurement of energy transmission from the bank of capacitors to the plasma is made using few experimental resources. In this work it was analyzed more than 2500 curves with a nonlinear procedure. Our results show that it is possible to design an optimized theta pinch making the appropriated choice of energetic parameters and therefore to reduce the stress of the system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Test for the Existence of Mach Effects with a Rotary Device

Owing to the variation in the results of several experiments designed to produce thrust with devices employing Mach effects, it was decided to design an experiment with the simple purpose of determining whether or not Mach effects actually exist, and if they can be produced when the ''bulk'' acceleration and internal energy changes required to produce them are separately supplied. In the experiment arrays of eight 500 pf high voltage capacitors are mounted on the end of a rotor and spun to and from speeds of about 60 Hz (3600 rpm) while they are excited with a 40 KHz voltage signal with amplitudes up to 6 KV. The capacitors are sandwiched between two accelerometers and any Mach effect mass fluctuation is detected as a weight fluctuation that produces signals in the accelerometers that are antiphase. Those signals are subtracted with a differential instrumentation amplifier that suppresses other signals as common mode noise. Signals with the properties sought have been found and recorded with video equipment. They suggest that Mach effects are real, and that the bulk accelerations and internal energy changes that produce them can in fact be separately supplied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pulsed current wave shaping with a transmission line by utilizing superposition of a forward and a backward voltage wave for fast capillary Z-pinch discharge

By using a water transmission line, current wave shaping was demonstrated for a fast capillary Z-pinch discharge recombination soft x-ray laser study. The pulsed power system consists of a water capacitor, a gap switch, a transmission line, and a capillary plasma load. A voltage wave initiated at the water capacitor propagates toward the capillary load through the transmission line. Control of the pulse delay that occurred in the transmission line provides the superposition of the forward and the backward voltage waves effectively in order to perform current wave shaping with higher current amplitude and rapid current decay.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Numerical investigation of closed-loop control for Hall accelerators

Low frequency discharge current oscillations in Hall accelerators are conventionally damped with external inductor-capacitor (LC) or resistor-inductor-capacitor (RLC) networks. The role of such network in the stabilization of the plasma discharge is investigated with a numerical model and the potential advantages of proportional-integral-derivative (PID) closed-loop control over RLC networks are subsequently assessed using either discharge voltage or magnetic field modulation. Simulations confirm the reduction of current oscillations in the presence of a RLC network, but suggest that PID control could ensure nearly oscillation-free operation with little sensitivity toward the PID settings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cu penetration into low-k dielectric during deposition and bias-temperature stress

Cu penetration into low-k dielectrics can cause serious reliability issues in on-chip interconnect systems. Using secondary ion mass spectrometry with both front-side and back-side depth profiling strategies, Cu was found to diffuse into SiCOH low-k dielectric in a Cu/SiCOH/Si capacitor during Cu deposition. After bias-temperature stressing the capacitor at 270 deg. C and 2.5 MV/cm, Cu penetrates further into SiCOH, but its distribution profile is the same as that after the same temperature annealing without electrical bias, suggesting no Cu ion drift. The implication of these findings on the Cu/low-k dielectric time-dependent dielectric breakdown modeling is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm{sup 3} only. A compact size single capacitor (4 {mu}F) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 x 10{sup 4} neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our {sup 3}He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 {+-} 0.27) MeV. The measured neutron pulse width is (24 {+-} 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characteristics of a symmetrical Cockcroft-Walton power supply of 50 Hz 1.2 MV/50 mA

A 1.2 MV/50 mA symmetrical Cockcroft-Walton (SCW) power supply of over 83% power efficiency, driven by 50 Hz frequency, was developed for an industrial electron beam irradiator. It is constructed by capacitors of 45 nF and 28.13 nF in the coupling column and capacitors of 18.75 nF in the smoothing column. Working status of the rectifier in high power output condition was analyzed, and the conduction angle of the rectifier was calculated. The power factor (PF) of the SCW circuit has been studied, and the equivalent condensance of the circuit has been derived. Measurements were done for the PF compensation. The surge impact during the short circuit transient process was considered in choosing the protection resistance. Test results showed that design specifications of the power supply were achieved, with the non-load voltage being up to 1.32 MV and the ratio of ripple voltage to output voltage as 9.4%.

43 PARTICLE ACCELERATORS↗

Controllable giant dielectric constant in AlO{sub x}/TiO{sub y} nanolaminates.

Dielectric materials exhibiting high dielectric constants play critical roles in a wide range of applications from microchip energy storage embedded capacitors for implantable biomedical devices to energy storage capacitors for a new generation of renewable energy generation/storage systems. Instead of searching for new materials, we demonstrate that giant dielectric constants can be achieved by integrating two simple oxides with low dielectric constants into nanolaminate structures. In addition, the obtained dielectric constant values are highly tunable by manipulating the sub-layer thicknesses of the component oxides to control the number of interfaces and oxygen redistribution. The work reported here opens a new pathway for the design and development of high dielectric constant materials based on the nanolaminate concept.

36 MATERIALS SCIENCE↗

Impact of post deposition annealing in the electrically active traps at the interface between Ge(001) substrates and LaGeO{sub x} films grown by molecular beam deposition

Changes in the electron trapping at the interface between Ge substrates and LaGeO{sub x} films grown by atomic O assisted molecular beam deposition are inferred upon post deposition annealing treatment on the as-deposited films from electrically detected magnetic resonance (EDMR) spectroscopy and from the electrical response of Pt/LaGeO{sub x}/Ge metal oxide semiconductor (MOS) capacitors. The improved electrical performance of the MOS capacitors upon annealing is consistent with the EDMR detected reduction of oxide defects which are associated with GeO species in the LaGeO{sub x} layer as evidenced by x-ray photoelectron spectroscopy.

36 MATERIALS SCIENCE↗

Electric field-perturbation measurement of the interaction between two laser-induced plasmas

The interaction between two ns-laser-induced plasmas in air at the early-stage of expansion has been analyzed by using a method based on the direct measurement of the perturbation of an externally applied electric field. In this experimental method, the plasmas were produced by focusing two laser beams between the plates of a parallel-plane-charged capacitor. These plasmas produce a perturbation in the electric field of the capacitor which can be measured as a voltage change across a resistor connected to the ground plate. It was found that for delays shorter than 5 ns, the interaction between plasmas is mainly due to the interaction of the dipole-charge distribution of each plasma. For longer time delays, the shielding effect was dominant.

43 PARTICLE ACCELERATORS↗

Energy spectrum of argon ions emitted from Filippov type Sahand plasma focus

The energy and flux of the argon ions produced in Sahand plasma focus have been measured by employing a well-designed Faraday cup. The secondary electron emission effects on the ion signals are simulated and the dimensions of Faraday cup are optimized to minimize these effects. The measured ion energy spectrum is corrected for the ion energy loss and charge exchange in the background gas. The effects of the capacitor bank voltage and working gas pressure on the ion energy spectrum are also investigated. It has been shown that the emitted ion number per energy increases as the capacitor bank voltage increases. Decreasing the working gas pressure leads to the increase in the number of emitted ion per energy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics

The high current regime of a magnetron-type discharge has been investigated. The discharge uses a permanent magnet as a cold cathode which emits secondary electrons while the chamber wall or a grounded electrode serves as the anode. As the discharge voltage is increased, the magnet develops cathode spots, which are short duration arcs that provide copious electrons to increase the discharge current dramatically. Short (1 μs), high current (200 A) and high voltage (750 V) discharge pulses are produced in a relaxation instability between the plasma and a charging capacitor. Spots are also observed on a negatively biased plane Langmuir probe. The probe current pulses are as large as those on the magnet, implying that the high discharge current does not depend on the cathode surface area but on the properties of the spots. The fast current pulses produce large inductive voltages, which can reverse the electrical polarity of the magnet and temporarily operate it as an anode. The discharge current may also oscillate at the frequency determined by the charging capacitor and the discharge circuit inductance. Each half cycle of high-current current pulses exhibits a fast (≃10 ns) current rise when a spot is formed. It induces high frequency (10–100 MHz) transients and ringing oscillations in probes and current circuits. Most probes behave like unmatched antennas for the electromagnetic pulses of spot discharges. Examples are shown to distinguish the source of oscillations and some rf characteristics of Langmuir probes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and initial results from a kilojoule level dense plasma focus with hollow anode and cylindrically symmetric gas puff

We have designed and built a Dense Plasma Focus (DPF) Z-pinch device using a kJ-level capacitor bank and a hollow anode, and fueled by a cylindrically symmetric gas puff. Using this device, we have measured peak deuteron beam energies of up to 400 keV at 0.8 kJ capacitor bank energy and pinch lengths of ∼6 mm, indicating accelerating fields greater than 50 MV/m. Neutron yields of on the order of 10{sup 7} per shot were measured during deuterium operation. The cylindrical gas puff system permitted simultaneous operation of DPF with a radiofrequency quadrupole accelerator for beam-into-plasma experiments. This paper describes the machine design, the diagnostic systems, and our first results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗