Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Air Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

The effects of space radiation on thin films of YBa2Cu3O(7-x)

This investigation had two objectives: (1) to determine the effects of space radiation on superconductor parameters that are most important in space applications; and (2) to determine whether this effect can be simulated with Co-60 gamma rays, the standard test method for space materials. Thin films of yttrium barium copper oxide (YBCO) were formed by coevaporation of Y, BaF2, and Cu and post-annealing in wet oxygen at 850 C for 3.5 h. The substrate used was (100) silicon with an evaporated zirconia buffer layer. The samples were characterized by four point probe electrical measurements as a function of temperature. The parameters measured were the zero resistance transition temperature T(sub c) and the room temperature resistance. The samples were then exposed to Co-60 gamma-rays in air and in pure nitrogen, and to 780 keV electrons, in air. The parameters were then remeasured. The results are summarized. The results indicate little or no degradation in the parameters measured for samples exposed up to 10 Mrads of gamma-rays in nitrogen. However, complete degradation is preliminarily attributed to the high level of ozone generated in the chamber by the gamma-ray interaction with air. It can be concluded that: (1) the electron component of space radiation does not degrade the critical temperature of the YBCO films described, at least for energies around 800 keV and doses similar to those received by surface materials on spacecraft in typical remote sensing missions; and (2) for qualifying this and other superconducting materials against the space-radiation threat the standard test method used in the aerospace industry, namely, exposure to Co-60 gamma-rays in air, may require some further investigation. As a minimum, the sample must be either in vacuum or in positive nitrogen pressure.

Herschitz, R.↗
DOE OSTI2023

Methane, ethane, and propane production in Greenland ice core samples and a first isotopic characterization of excess methane

Air trapped in polar ice provides unique records of the past atmospheric composition ranging from key greenhouse gases such as methane (CH 4 ) to short-lived trace gases like ethane (C 2 H 6 ) and propane (C 3 H 8 ). Recently, the comparison of CH 4 records obtained using different extraction methods revealed disagreements in the CH 4 concentration for the last glacial in Greenland ice. Elevated methane levels were detected in dust-rich ice core sections measured discretely, pointing to a process sensitive to the melt extraction technique. To shed light on the underlying mechanism, we performed targeted experiments and analyzed samples for methane and the short-chain alkanes ethane and propane covering the time interval from 12 to 42 kyr. Here, we report our findings of these elevated alkane concentrations, which scale linearly with the amount of mineral dust within the ice samples. The alkane production happens during the melt extraction step of the classic wet-extraction technique and reaches 14 to 91 ppb of CH 4 excess in dusty ice samples. We document for the first time a co-production of excess methane, ethane, and propane, with the observed concentrations for ethane and propane exceeding their past atmospheric background at least by a factor of 10. Independent of the produced amounts, excess alkanes were produced in a fixed molar ratio of approximately 14 : 2 : 1, indicating a shared origin. The measured carbon isotopic signature of excess methane is (-47.0 ± 2.9) ‰ and its deuterium isotopic signature is (-326 ± 57) ‰. With the co-production ratios of excess alkanes and the isotopic composition of excess methane we established a fingerprint that allows us to constrain potential formation processes. This fingerprint is not in line with a microbial origin. Moreover, an adsorption–desorption process of thermogenic gas on dust particles transported to Greenland does not appear very likely. Instead, the alkane pattern appears to be indicative of abiotic decomposition of organic matter as found in soils and plant leaves.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Humidity-controlled preparation of frozen-hydrated biological samples for cryogenic coherent x-ray diffraction microscopy

Coherent x-ray diffraction microscopy (CXDM) has the potential to visualize the structures of micro- to sub-micrometer-sized biological particles, such as cells and organelles, at high resolution. Toward advancing structural studies on the functional states of such particles, here, we developed a system for the preparation of frozen-hydrated biological samples for cryogenic CXDM experiments. The system, which comprised a moist air generator, microscope, micro-injector mounted on a micromanipulator, custom-made sample preparation chamber, and flash-cooling device, allowed for the manipulation of sample particles in the relative humidity range of 20%-94%rh at 293 K to maintain their hydrated and functional states. Here, we report the details of the system and the operation procedure, including its application to the preparation of a frozen-hydrated chloroplast sample. Sample quality was evaluated through a cryogenic CXDM experiment conducted at BL29XUL of SPring-8. Taking the performance of the system and the quality of the sample, the system was suitable to prepare frozen-hydrated biological samples for cryogenic CXDM experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1999

Subsidence, Mixing and Denitrification of Arctic Polar Vortex Air Measured During POLARIS

A new technique is presented to determine the degree of denitrification that occured during the 1996/97 Arctic winter, based on balloon and aircraft borne measurements of NOy, N2O and CH4. In this study high-altitude balloon measurements are used to define the properties of air masses that later descend in the polar vortex to altitudes sampled by the ER-2 aircraft and mix isentropically with mid-latitude air.

stratosphere↗
DOE OSTI2025

Agile Allocation in the Tundra: A Single Growing Season of Warming Increases Nutrient Availability While Decreasing Fine-Root Length

The majority of plant biomass is located belowground in Arctic ecosystems and plant roots are responsible for the uptake of the nutrients that constrain plant growth in these infertile ecosystems. Despite performing a crucial role connecting primary producers to the soil, roots are relatively understudied in the Arctic and their functional response to a rapidly warming and increasingly variable climate is unknown. Here, we assessed whether one growing season with elevated temperatures would have an impact on nutrient uptake and allocation by applying a warming technique that increased daily air temperatures by 3.2 °C. Destructive sampling was performed at the peak of the growing season to quantify biomass pools of carbon (C) and nitrogen (N), root traits, and uptake of a 15 N tracer ( 15 NH 4 + ) for the dominant plant species, Arctagrostis latifolia. We found that soil nutrient availability increased with short-term warming, but A. latifolia NH 4 + uptake remained unchanged. Fine-root length density and root biomass within the soil profile, however, were both reduced by warming. N allocation patterns across plant tissues were also altered by warming. NH 4 + uptake was best fit with a logistic model that captured the spatial relationship between roots and soil (NH 4 + uptake expressed per length fine root and NH 4 + availability expressed per unit soil volume) rather than a traditional Michaelis–Menten model. Our results indicate that short-term experimental warming can shift plant–soil interactions, suggesting that the tundra’s belowground response to elevated temperatures may be more dynamic than previously recognized.

15N tracer↗
DOE OSTI2011

Capturing the implications of land use change in Brazil through environmental assessment: Time for a strategic approach?

Brazil is experiencing a surge in planting of sugar cane crops driven by internal markets and external policy drivers for biofuels. The current expectation is for the expansion of these crops to continue. This creates concern over the extent to which the full implications of large scale land use change are currently being considered by decision-makers. Using the State of Sao Paulo as a case study (as it accounts for the majority of sugar cane grown in Brazil), a comparison was made of the impacts identified in Environmental Impact Statements (EISs) and Preliminary Environmental Reports (PERs), which have to be submitted for approval of most new sugar cane activities, with significant impacts known to be associated with sugar cane activities derived from literature review. The results from a review of 32 EISs and PERs (30% of the population) indicated that whilst some impacts were well covered by the sample (water and soil pollution, and air emissions) energy balance and Green House Gas emissions and food security had very limited consideration, and water resources, residues, labour conditions and social responsibility were only partially covered. Environmental Impact Assessment is constrained by its environmental advocacy role and its application to the project level only. This study highlights its limitations in the context of assessment of land use change which demands more strategic consideration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Comparison of NBG-18, NBG-17, IG-110 and IG-11 oxidation kinetics in air

In this paper, the oxidation rates of several nuclear-grade graphites, NBG-18, NBG-17, IG-110 and IG-11, were measured in air using thermogravimetry. Kinetic parameters and oxidation behavior for each grade were compared by coke type, filler grain size and microstructure. The thickness of the oxidized layer for each grade was determined by layer peeling and direct density measurements. The results for NBG-17 and IG-11 were compared with those available in the literature and our recently reported results for NBG-18 and IG-110 oxidation in air. The finer-grained graphites IG-110 and IG-11 were more oxidized than medium-grained NBG-18 and NBG-17 because of deeper oxidant penetration, higher porosity and higher probability of available active sites. Variation in experimental conditions also had a marked effect on the reported kinetic parameters by several studies. Finally, kinetic parameters such as activation energy and transition temperature were sensitive to air flow rates as well as sample size and geometry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2013

Synchronistic preparation of fibre-like SiC and cubic-ZrO{sub 2}/SiC composite from zircon via carbothermal reduction process

Graphical abstract: Display Omitted Highlights: ► Zircon carbothermal reduction was carried out in a tailor-made device at high-temperature air atmosphere. ► Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were obtained synchronically. ► Zirconium and silicon in zircon ore was initial separated. ► [SiO{sub 4}] was mutated to fibre-like SiC, while [ZrO{sub 8}] was transformed to cubic ZrO{sub 2}. ► The SiC were surprisingly enriched in the reducing atmosphere charred coal particles layers by gas–solid reaction. -- Abstract: Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were prepared respectively from zircon with yttrium oxide addition via carbothermal reduction process at 1600 °C for 4 h in an air atmosphere furnace, where the green samples were immerged in charred coal particles inside a high-temperature enclosed corundum crucible. The reaction products were characterized by XRD, XRF, XPS and SEM. The results indicate that ZrO{sub 2} in the products was mainly existed in the form of cubic phase. The reacted samples mainly contain cubic ZrO{sub 2}, β-SiC and trace amounts of zircon, with the SiC accounting for 14.8 wt%. Furthermore, a large quantity of fibre-like SiC was surprisingly found to concentrate in the charred coal particles layers around the samples. This study obtains fibre-like SiC and cubic-ZrO{sub 2}/SiC composite synchronically from zircon via carbothermal reduction process, which also bring a value-added high-performance application for natural zircon.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Radon daughter plate-out measurements at SNOLAB for polyethylene and copper

We report that polyethylene and copper samples were exposed to the underground air at SNOLAB for approximately three months while several environmental factors were monitored. Predictions of the radon-daughter plate-out rate are compared to the resulting surface activities, obtained from high-sensitivity measurements of alpha emissivity using the XIA UltraLo-1800 spectrometer at Southern Methodist University. From these measurements, we determine an average 210 Pb plate-out rate of 249 and 423 atoms/day/cm 2 for polyethylene and copper, respectively, when exposed to radon activity concentration of 135 Bq/m 3 at SNOLAB. Finally, a time-dependent model of alpha activity is discussed for these materials placed in similar environmental conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of Ti 3 SiC 2 MAX phase tubular structures for solar receiver applications

Solar receiver tubes are key components of concentrating solar-thermal power (CSP) systems that harvest solar energy. For better efficiency, the Gen3 CSP receivers, which collect heat into a heat transfer fluid, require a temperature exceeding 700 °C during operation and need to perform under extreme conditions of high temperature and high thermal stress. Operators are seeking CSP designs using new high-temperature structural materials with high thermal conductivity and high creep resistance to achieve a design life of 30 years and thus help recover the plant capital cost sooner. MAX phase materials, which consist of an early transition metal element, an A-group element, and carbon or nitrogen, are expected to exhibit high creep resistance as well as high fracture toughness. Here, in this paper, we describe fabricating both (1) dense Ti 3 SiC 2 MAX phase disks and (2) short-length tubes using field-assisted sintering technology (FAST). First, the disk samples that we fabricated are fully dense and contain ≈90 % Ti 3 SiC 2 MAX phase materials and ≈10 % TiC phase materials. We determined a flexure strength of 519 ± 32 MPa by conducting a four-point bending test at room temperature with rectangular bar samples of ≈100 % density. The thermal conductivity of the Ti 3 SiC 2 MAX phase samples, measured by light flashing analysis, decreases linearly from a value of 41 W . m -1 . K -1 at room temperature to a value of 36 W . m -1 . K -1 at 650 °C. A solar reflectance measurement of the Ti 3 SiC 2 MAX phase revealed that, temperature increases from 400 to 1400 °C, thermal emittance increases from 0.39 to 0.49, while selectivity decreases from 1.8 to 1.4, respectively. Whereas the surface oxidized MAX phase samples after 100 h exposure to air at 1000 °C exhibit that of SiC. Next, we discuss fabrication of the crack-free Ti 3 SiC 2 MAX phase tubular structures accomplished by using FAST processing in graphite bedding. A Ti 3 SiC 2 MAX phase content of > 95 % with traceable ≈3% remaining TiC phase and ≈15 % porosity were demonstrated after high-temperature annealing. An average fracture strength of ≈250 MPa was determined with Ti 3 SiC 2 MAX phase tubes of ≈85 % density by diametral compression testing at room temperature. Our work demonstrated that using FAST processing to produce Ti 3 SiC 2 MAX phase tubular structures for CSP receiver applications is a viable approach.

14 SOLAR ENERGY↗
DOE OSTI2023

An ab initio free energy study of the reaction mechanism and rate-limiting steps of CO 2 capture by aqueous glycine

Aqueous amino acids are promising absorbents for direct air capture (DAC) of CO 2 . Herein, we investigate the possibility of kinetic control of CO 2 absorption with aqueous anionic glycine (GLY - ) by employing extensive ab initio molecular dynamics simulations, free energy analysis, and reaction rate theory. We find that first GLY - binds to CO 2 by overcoming a barrier (7.4 kcal/mol) to form a zwitterion intermediate, which then releases a proton by overcoming a similar barrier. Despite the similarity in the barrier, zwitterion formation appears to be the rate-limiting step because it is two orders of magnitude slower (microseconds) than the proton release step. This is predominantly due to stronger nonequilibrium solvent effects for the former that cause many barrier-recrossing events and effectively slow down the reaction rate. Such a detailed fundamental understanding of the amino acid-based CO 2 -absorption mechanism and rates is key to improving the kinetic efficiency of DAC technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Alteration of Fractured Foamed Cement Exposed to CO2-Saturated Water: Implications for Well Integrity

Geologic CO2 storage (GCS) is a method to mitigate the adverse impact of global climate change. Potential leakage of CO2 from fractured cement at the wellbore poses a risk to the feasibility of GCS. Foamed cement is widely applied in deepwater wells where fragile geologic formations cannot support the weight of conventional cement. Thus, it is critical to know whether fractures in foamed cement self-seal in a similar manner as conventional cement systems. This study is the first to investigate the changes in physical and chemical attributes of foamed cement under dynamic flow conditions using CO2-saturated water. Self-sealing of fractures in the cement was observed at a solution flow rate of 0.1 mL/min and a pressure of 6.9 MPa. The formation of CaCO3 precipitates in pore spaces and fractures led to a decrease in permeability by 1 order of magnitude. The extents of self-sealing in foamed cement samples, specifically the 20 and 30% air volume formulations, were similar to that of conventional cements. We attribute this to the greater alteration depth in the foamed cement, which compensated for the reduced availability of Portlandite and higher initial porosity. The results can be used to evaluate the risk of leakage associated with foamed cement.

Geologcial Carbon Storage, Well Integrity in CO2 S↗
DOE OSTI2014

Investigations on optoelectronic transition mechanisms of silicon nanoporous pillar array by using surface photovoltage spectroscopy and photoluminescence spectroscopy

We report the electronic transition mechanisms for hydrothermally prepared silicon nanoporous pillar array (Si-NPA), investigated by surface photovoltage (SPV) spectroscopy and photoluminescence (PL) spectroscopy. By comparing the SPV spectra of single crystal silicon (sc-Si) with that of Si-NPA, the silicon nano-crystallites (nc-Si)/SiO{sub x} nanostructure in the Si-NPA could produce SPV in the wavelength range of 300–580 nm. And 580 nm (∼2.14 eV) was considered as the absorption edge of the nc-Si/SiO{sub x} nanostructure. After the sample was annealed and oxidized in air at different temperatures, both the SPV in the wavelength range of 300–580 nm and the PL emission band around 690 nm from the nc-Si/SiO{sub x} nanostructure weakened and disappeared as the annealing temperature increased from 100 to 500 °C. But both the red-infrared PL band (>710 nm) and the violet-blue PL band were enhanced by increasing the annealing temperature. After 2 years of natural oxidation in air, the SPV features for sc-Si disappeared completely, and the SPV characteristics of the nc-Si/SiO{sub x} nanostructure could be clearly observed. After analysis, the Si–O structure related localized states at the nc-Si/SiO{sub x} interface dominated the electronic transitions during the red PL emission and the SPV for the nc-Si/SiO{sub x} nanostructure in Si-NPA, the red–infrared PL was due to the Si=O structure related electronic transitions, and the violet-blue PL emission could attribute to the oxygen-related defect related recombination of the photo induced carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Radiation furnace for synchrotron dark-field x-ray microscopy experiments

We present a multi-purpose radiation furnace designed for x-ray experiments at synchrotrons. The furnace is optimized specifically for dark-field x-ray microscopy (DFXM) of crystalline materials at beamline ID06 of the European Synchrotron Radiation Facility. The furnace can reach temperatures above 1200 °C with a thermal stability better than 10 °C, with heating and cooling rates up to 30 K/s. The non-contact heating design enables samples to be heated either in air or in a controlled atmosphere contained within a capillary tube. The temperature was calibrated via the thermal expansion of an α-iron grain. Temperature profiles in the y and z axes were measured by scanning a thermocouple through the focal spot of the radiation furnace. In the current configuration of the beamline, this furnace can be used for DFXM, near-field x-ray topography, bright-field x-ray nanotomography, high-resolution reciprocal space mapping, and limited powder diffraction experiments. As a first application, we present a DFXM case study on isothermal heating of a commercially pure single crystal of aluminum.

Yildirim, C. (ORCID:0000000249690685)↗
DOE OSTI2013

Montana Integrated Carbon to Liquids (ICTL) Demonstration Program

Integrated carbon-to-liquids technology (ICTL) incorporates three basic processes for the conversion of a wide range of feedstocks to distillate liquid fuels: (1) Direct Microcatalytic Coal Liquefaction (MCL) is coupled with biomass liquefaction via (2) Catalytic Hydrodeoxygenation and Isomerization (CHI) of fatty acid methyl esters (FAME) or trigylceride fatty acids (TGFA) to produce liquid fuels, with process derived (3) CO 2 Capture and Utilization (CCU) via algae production and use in BioFertilizer for added terrestrial sequestration of CO 2 , or as a feedstock for MCL and/or CHI. This novel approach enables synthetic fuels production while simultaneously meeting EISA 2007 Section 526 targets, minimizing land use and water consumption, and providing cost competitive fuels at current day petroleum prices. ICTL was demonstrated with Montana Crow sub-bituminous coal in MCL pilot scale operations at the Energy and Environmental Research Center at the University of North Dakota (EERC), with related pilot scale CHI studies conducted at the University of Pittsburgh Applied Research Center (PARC). Coal-Biomass to Liquid (CBTL) Fuel samples were evaluated at the US Air Force Research Labs (AFRL) in Dayton and greenhouse tests of algae based BioFertilizer conducted at Montana State University (MSU). Econometric modeling studies were also conducted on the use of algae based BioFertilizer in a wheat-camelina crop rotation cycle. We find that the combined operation is not only able to help boost crop yields, but also to provide added crop yields and associated profits from TGFA (from crop production) for use an ICTL plant feedstock. This program demonstrated the overall viability of ICTL in pilot scale operations. Related work on the Life Cycle Assessment (LCA) of a Montana project indicated that CCU could be employed very effectively to reduce the overall carbon footprint of the MCL/CHI process. Plans are currently being made to conduct larger-scale process demonstration studies of the CHI process in combination with CCU to generate synthetic jet and diesel fuels from algae and algae fertilized crops. Site assessment and project prefeasibility studies are planned with a major EPC firm to determine the overall viability of ICTL technology commercialization with Crow coal resources in south central Montana.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

CalTestBed - Twelve Benefit Co - Understanding Degradation of Water Management Properties in Gas Diffusion Layers (CRADA Final Report)

The research between Lawrence Berkeley National Lab and Twelve Benefit Co. enhanced Twelve’s understanding of how chemical changes to the gas diffusion layer lead to failure of their CO 2 electrolyzers. During the CRADA period, LBNL team tested Twelve’s gas diffusion layer samples (GDL), some with microporous layer (MPL) and some without MPL using the water-air capillary pressure setup. LBNL team also tested microporous layer samples using the fuel cell test stands and compared those results with commercial GDL and MPL. Understanding the hydrophobicity of the material, along with electrochemical performance is the key to determining Twelve’s ability to scale their platform. Further improvements to Twelve’s CO 2 electrolyzer can enhance the net zero emissions with their technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Effects of Intercritical Annealing Temperature on Mechanical Properties of Fe-7.9Mn-0.14Si-0.05Al-0.07C Steel

A medium Mn steel has been designed to achieve an excellent combination of strength and ductility based on the TRIP (Transformation Induced Plasticity) concept for automotive applications. Following six passes of hot rolling at 850 °C, the Fe-7.9Mn-0.14Si-0.05Al-0.07C (wt.%) steel was warm-rolled at 630 °C for seven passes and subsequently air cooled to room temperature. The sample was subsequently intercritically annealed at various temperatures for 30 min to promote the reverse transformation of martensite into austenite. The obtained results show that the highest volume fraction of austenite is 39% for the sample annealed at 600 °C. This specimen exhibits a yield stress of 910 MPa and a high ultimate tensile stress of 1600 MPa, with an elongation-to-failure of 0.29 at a strain rate of 1 × 10⁻³/s. The enhanced work-hardening ability of the investigated steel is closely related to martensitic transformation and the interaction of dislocations. Especially, the alternate arrangement of acicular ferrite (soft phase) and ultrafine austenite lamellae (50–200 nm, strong and ductile phase) is the key factor contributing to the excellent combination of strength and ductility. On the other hand, the as-warm-rolled sample also exhibits the excellent combination of strength and ductility, with elongation-to-failure much higher than those annealed at temperatures above 630 °C.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Portable life support for instrumentation of an offshore platform

A compressor was used to supply air through a nylon hose to the offshore platform field engineer working at the bottom of the piling. Air quality in the pile was sampled periodically for carbon dioxide, carbon monoxide, hydrogen sulfide, and combustible gases by an universal tester and an explosion meter.

Mull, M. M.↗