Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

FAST.Farm [SWR-17-56]

FAST.Farm is a multi-physics engineering tool for predicting the performance and loads of wind turbines within a wind farm. FAST.Farm uses FAST to solve the aero-hydro-servo-elastic dynamics of an individual turbine, but adds additional physics for wind farm-wide ambient wind in the atmospheric boundary layer; a wind-farm super controller; and wake deficits, advection, deflection, meandering, and merging. FAST.Farm is based on the principles of the Dynamic Wake Meandering (DWM) model—including passive tracer modeling of wake meandering—but addresses many of the limitations of previous DWM limitations. FAST.Farm maintains a low computational cost to the often highly iterative and probabilistic design process. Applications of FAST.Farm include reducing wind farm underperformance and loads uncertainty, developing wind farm controls to enhance operation, optimizing wind farm siting and topology, and innovating the design of wind turbines for the wind-farm environment.

Jonkman, Jason↗
DOE OSTI2024

Design Load Basis Guidance for Distributed Wind Turbines

Aeroelastic modeling (AM) is the primary methodology for structural and performance assessment of any wind turbine. Nonetheless, the use of AM in the distributed wind (DW) industry sector is limited due to several challenges (Damiani, Davis, & Summerville, 2022). One of these challenges lies in the perceived complexity of generating a proper set of numerical simulations to extract and process the key outputs for component design and verification, and, ultimately, achieve certification. This makes it difficult to reliably predict the structural and performance response of small wind turbines. From the investigation carried out in (Damiani & Davis, 2022), it is apparent that many stakeholders in this sector believe that a comprehensive guide for developing a design load basis (DLB) for distributed wind turbines (DWTs) is necessary.

17 WIND ENERGY↗
NASA NTRS1973

A search for far-ultraviolet emissions from the lunar atmosphere

An ultraviolet spectrometer aboard the Apollo 17 orbiting spacecraft attempted to measure ultraviolet emissions from the lunar atmosphere. The only emissions observed were from a transient atmosphere introduced by the lunar landing engine. The absence of atomic hydrogen implies that solar wind protons are converted to hydrogen molecules at the lunar surface.

Fastie, W. G.↗
NASA NTRS1975

Application of trajectory optimization techniques to upper atmosphere sampling flights using the F4-C Phantom aircraft

Altitude potential of an off-the-shelf F4-C aircraft is examined. It is shown that the standard F4-C has a maximum altitude capability in the region from 85000 to 95000 ft, depending on the minimum dynamic pressures deemed acceptable for adequate flight control. By using engine overspeed capability and by making use of prevailing winds in the stratosphere, it is suggested that the maximum altitude achievable by an F4-C should be in the vicinity of 95000 ft for routine flight operation. This altitude is well in excess of the minimum altitudes which must be achieved for monitoring the possible growth of suspected aerosol contaminants.

Hague, D. S.↗
NASA NTRS1975

Drag Reduction: Back to Basics

Aeronautical design engineering for general aviation aircraft considers the iteration of wind tunnel test data are lift, weight, drag, and thrust as the basic balancing factor in drag reduction efforts.

Nicks, O. W.↗
NASA NTRS1980

Performance estimates of a Boeing 747-100 transport mated with an outsize cargo pod

The design mission performance of a Boeing 747-100 aircraft mated with an outsize cargo pod was studied. The basic design requirement was the rapid deployment of a combat loaded mobile bridge launcher from a United States east coast staging base to Europe. Weight was minimized by stripping the aircraft of unneeded, quick removal items and by utilizing graphite-epoxy composite materials for most pod components. The mission analysis was based on wind tunnel data and full scale carrier aircraft and engine data. The results are presented in tabular and graphic form.

Jernell, L. S.↗
NASA NTRS1980

Results from flight noise tests on a Viper turbojet fitted with ejector/suppressor nozzle systems

Noise tests have been performed on a range of advanced exhaust suppressors fitted to a Viper turbojet engine with the objective of evaluating systems potentially suitable for subsonic and supersonic aircraft. A key item in the suppressor systems was an acoustically lined ejector, and tests were made with and without this ejector. Flight tests were made using an HS-125 aircraft in England and were followed by outdoor static tests at NASA Ames Research Center. In addition, acoustic and propulsion measurements were made at static, and in simulated flight conditions, with the engine installed in the Ames 40- by 80-ft wind tunnel. The paper deals mainly with the flight test results. These show that the use of a lined ejector considerably increases the attenuation obtainable using a suppressor nozzle alone and largely confirm predictions made on the basis of previous model and static tests. The maximum measured attenuation adjusted to an altitude of 500 ft was 14 EPNdB at an ideal jet velocity of 2400 ft/sec using the suppressor/ejector design intended for supersonic application. Initial propulsion performance results from the Ames wind tunnel confirm previous smaller scale propulsion results from a Douglas facility.

Brooks, J. R.↗
NASA NTRS1984

Research opportunities for rotorcraft

The control of structural vibration is helicopters is discussed. Active control concepts, wind tunnel tests, rotor vibratory loads, systems integration, and engine control are among the topics discussed.

Blake, B. B.↗
NASA NTRS1989

The resources of Mars for human settlement

Spacecraft exploration of Marshas shown that the essential resources necessary for life support are present on the Martian surface. The key life-support compounds O2, N2, and H2O are available on Mars. The soil could be used as radiation shielding and could provide many useful industrial and construction materials. Compounds with high chemical energy, such as rocket fuels, can be manufactured in-situ on Mars. Solar power, and possibly wind power, are available and practical on Mars. Preliminary engineering studies indicate that fairly autonomous processes can be designed to extract and stockpile Martian consumables.

Meyer, Thomas R.↗
NASA NTRS1993

Bar-Chart-Monitor System For Wind Tunnels

Real-time monitor system provides bar-chart displays of significant operating parameters developed for National Full-Scale Aerodynamic Complex at Ames Research Center. Designed to gather and process sensory data on operating conditions of wind tunnels and models, and displays data for test engineers and technicians concerned with safety and validation of operating conditions. Bar-chart video monitor displays data in as many as 50 channels at maximum update rate of 2 Hz in format facilitating quick interpretation.

Jung, Oscar↗
NASA NTRS1928

Full Scale Drag Tests on Various Parts of Sperry Messenger Airplane

The drag of a Sperry Messenger airplane with the wings removed, and also the drag of its various component parts, was measured in the 20-foot air stream of the N.A.C.A. propeller research tunnel at air speeds from 50 to 100 m.p.h. It was found that the three-cylinder radial air-cooled engine nearly doubled the drag of the bare fuselage, and the drag of the landing gear was about the same as that of the fuselage and engine combined.

AIRPLANES - WIND TUNNEL TESTS DRAG TESTS - SPERRY ↗
NASA NTRS1939

Flight Tests of N.A.C.A. Nose-slot Cowlings on the BFC-1 Airplane

The results of flight tests of four nose-slot cowling designs with several variations in each design are presented. The tests were made in the process of developing the nose-slot cowling. The results demonstrate that a nose-slot cowling may be successfully applied to an airplane and that it utilizes the increased slipstream velocity of low-speed operation to produce increased cooling pressure across the engine. A sample design calculation using results from wind-tunnel, flight, and ground tests is given in an appendix to illustrate the design procedure.

Stickle, George W↗
NASA NTRS1937

Full-Scale Tests of a New Type NACA Nose-Slot Cowling

An extended experimental study has been made in regard to the various refinements in the design of engine cowlings as related to the propeller-nacelle unit as a whole, under conditions corresponding to take-off, climb, and normal flight. The tests were all conducted at full scale in the 20-foot wind tunnel. This report presents the results of a novel type of engine cowling, characterized by the fact that the exit opening discharging the cooling air is not, as usual, located behind the engine but at the foremost extremity or nose of the cowling. The efficiency is found to be high, owing to the fact that higher velocities may be used in the exit opening.

Theodorsen, Theodore↗
NASA NTRS1952

Pressure recovery, drag, and subcritical stability characteristics of conical supersonic diffusers with boundary-layer removal

A study of two 20 degrees half-angle, low mass-flow ratio conical supersonic inlets with cone boundary-layer bleed was made on a 16-inch ram-jet engine in the Lewis 8- by 6-foot supersonic wind tunnel. A greater stable subcritical range of operation was obtained with the bleed inlets than with the corresponding inlet without boundary-layer bleed. The drag added by the bleed system was small.

Obey, Leonard T↗
NASA NTRS2000

Computation of External Aerodynamics for a Canard Rotor/Wing Aircraft

The aerodynamic loads on a Canard Rotor/Wing vehicle are investigated using inviscid numerical simulations to understand the aerodynamic characteristics of the vehicle during conversion from rotorcraft to fixed wing flight. Steady numerical simulations at five azimuthal rotor indices are presented over a quarter turn of the rotor, producing 19 points during a single rotation due to symmetry. A Cartesian mesh approach is used to compute the steady flow field. All computations are done with a faired over engine inlet and exit to be consistent with the wind tunnel model geometry. Modification to the geometry is suggested and the aerodynamic effect of the modification is discussed.

Pandya, S.↗
NASA NTRS2003

A Collection of Nonlinear Aircraft Simulations in MATLAB

Nonlinear six degree-of-freedom simulations for a variety of aircraft were created using MATLAB. Data for aircraft geometry, aerodynamic characteristics, mass / inertia properties, and engine characteristics were obtained from open literature publications documenting wind tunnel experiments and flight tests. Each nonlinear simulation was implemented within a common framework in MATLAB, and includes an interface with another commercially-available program to read pilot inputs and produce a three-dimensional (3-D) display of the simulated airplane motion. Aircraft simulations include the General Dynamics F-16 Fighting Falcon, Convair F-106B Delta Dart, Grumman F-14 Tomcat, McDonnell Douglas F-4 Phantom, NASA Langley Free-Flying Aircraft for Sub-scale Experimental Research (FASER), NASA HL-20 Lifting Body, NASA / DARPA X-31 Enhanced Fighter Maneuverability Demonstrator, and the Vought A-7 Corsair II. All nonlinear simulations and 3-D displays run in real time in response to pilot inputs, using contemporary desktop personal computer hardware. The simulations can also be run in batch mode. Each nonlinear simulation includes the full nonlinear dynamics of the bare airframe, with a scaled direct connection from pilot inputs to control surface deflections to provide adequate pilot control. Since all the nonlinear simulations are implemented entirely in MATLAB, user-defined control laws can be added in a straightforward fashion, and the simulations are portable across various computing platforms. Routines for trim, linearization, and numerical integration are included. The general nonlinear simulation framework and the specifics for each particular aircraft are documented.

Frederico R Garza↗
NASA NTRS2006

Status, Plans, and Initial Results for Crew Launch Vehicle Aerodynamics

Following the completion of NASA s Exploration Systems Architecture Study in August 2004 for the NASA Exploration Systems Mission Directorate (ESMD), the Exploration Launch Office at the NASA Marshall Space Flight Center began design and development of the first vehicle in the architecture, the Crew Launch Vehicle (CLV), which will be used to launch astronauts to low earth orbit and rendezvous with either the International Space Station or the ESMD s earth departure stage for lunar missions. The primary elements of the CLV project are the first stage, the upper stage, the upper stage engine, and vehicle integration. Within vehicle integration is an effort in integrated design and analysis which is comprised of a number of technical disciplines needed to support vehicle design and development. One of the important disciplines throughout the life of the project is aerodynamics. This paper will present the status, plans, and initial results of CLV aerodynamics as the project was preparing for the CLV Systems Requirements Review. Following a status of the current activities and a discussion of the specific interactions with other technical panels, the plans for aerodynamic support of the CLV until the initial crewed flights will be presented. The paper will conclude with a review of initial results acquired since project inception, including engineering-code vehicle assessment, computational fluid dynamics analysis, and wind tunnel test data.

Huebner, Lawrence D.↗
NASA NTRS2008

Daytime Observations of Mid-Latitude Sporadic-E and QP Radar Echoes

Although sporadic-E layers and quasi-periodic (QP) radars are typically detected during nighttime conditions at mid-latitudes, they also may exist in the daytime lower ionosphere as well. We present observations of ionosonde observations of daytime sporadic-E layers gathered at the Wallops Flight Facility, Virginia, in the late morning to noon local times. The data reveal sporadic-E characteristics similar to nighttime observations including considerable variations in frequency and altitude. For one event, observed on 23 July 1999 near 14 U.T. (10 L.T.), we present coincident strong Wallops ionosonde sporadic-E observations and SOMHz backscatter radar observations of quasi-periodic echoes gathered with the University of Illinois radar situated at Ft. Macon, N.C., whose beam was perpendicular to the magnetic field in the lower E-region over Wallops. The radar data show daytime QP structuring that is very similar to the nighttime observations, suggesting a similar driving mechanism. A statistical survey of the daytime ionogram data at Wallops shows a preponderance of daytime sporadic-E events occurring during the local summer months, a seasonal dependence that is well-established for nighttime sporadic-E conditions in the northern hemisphere. No clear correlation is observed between the daytime sporadic- E events and magnetic storms, suggesting that the daytime sporadic-E events are not necessarily driven by the disturbance dynamo. Rather, we speculate that the same large wind shears that are believed to be the main engine for the nighttime sporadic-E and QP echoes, may also be at work during the daytime. The existence of enhanced plasma density layers during the daytime and their role in generating QP-echoes during the day remain open questions.

Pfaff, Robert↗