Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vector control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Modeling and control of beam-like structures

The most popular finite element codes are based upon appealing theories of convergence of modal frequencies. For example, the popularity of cubic elements for beam-like structures is due to the rapid convergence of modal frequencies and stiffness properties. However, for those problems in which the primary consideration is the accuracy of response of the structure at specified locations it is more important to obtain accuracy in the modal costs than in the modal frequencies. The modal cost represents the contribution of a mode in the norm of the response vector. This paper provides a complete modal cost analysis for beam-like continua. Upper bounds are developed for mode truncation errors in the model reduction process and modal cost analysis dictates which modes to retain in order to reduce the model for control design purposes.

Hu, A.↗
NASA NTRS1995

Concept Designed and Developed for Distortion- Tolerant, High-Stability Engine Control

Engine Control Future aircraft turbine engines, both commercial and military, must be able to successfully accommodate expected increased levels of steady-state and dynamic engine-face distortion. Advanced tactical aircraft are likely to use thrust vectoring to enhance their maneuverability. As a result, the engines will see more extreme aircraft angles-of-attack and sideslip levels than are currently encountered with present-day aircraft. Also, the mixed-compression inlets needed for the High Speed Civil Transport will likely encounter disturbances similar to those seen by tactical aircraft, in addition to planar pulse, inlet buzz, and high distortion levels at low flight speed and off-design operation. The current approach of incorporating a sufficient component design stall margin to tolerate these increased levels of distortion would significantly reduce performance. The objective of the High Stability Engine Control (HISTEC) program is to design, develop, and flight demonstrate an advanced, high-stability, integrated engine-control system that uses measurement-based, real-time estimates of distortion to enhance engine stability. The resulting distortion-tolerant control reduces the required design stall margin, with a corresponding increase in performance and decrease in fuel burn. The HISTEC concept has been designed and developed, and the software implementing the concept has successfully accommodated time-varying distortion. The NASA Lewis Research Center is currently overseeing the development and validation of the hardware and software necessary to flight test the HISTEC concept. HISTEC is a contracted effort with Pratt & Whitney of West Palm Beach, Florida. The HISTEC approach includes two major systems: A Distortion Estimation System (DES) and Stability Management Control (SMC). DES is an aircraft-mounted, high-speed processor that estimates the amount and type of distortion present and its effect on the engine. It uses high-response pressure measurements at the engine face to calculate indicators of the type and extent of distortion in real time. From these indicators, DES determines the effects of distortion on the propulsion systems and the corresponding engine match point necessary to accommodate it. DES output consists of fan and compressor pressure ratio trim commands that are passed to the SMC. In addition, DES uses maneuver information, consisting of angle-of-attack and sideslip from the flight control, to anticipate high inlet distortion conditions. The SMC, which is contained in the engine-mounted, Improved Digital Electronic Engine Control (IDEEC), includes advanced control laws to directly control the fan and compressor transient operating line (pressure ratio). These advanced control laws, with a multivariable design, have the potential for higher bandwidth and the resulting more precise control of engine match. The ability to measure and assess the distortion effects in real time coupled with a high-response controller improves engine stability at high levels of distortion. The software algorithms implementing DES have been designed, developed, and demonstrated, and integration testing of the DES and SMC software has been completed. The results show that the HISTEC system will be able to sense inlet distortion, determine the effect on engine stability, and accommodate distortion by maintaining an adequate margin for engine surge. The Pratt &Whitney Comprehensive Engine Diagnostic Unit was chosen as the DES processor. An instrumented inlet case for sensing distortion was designed and fabricated. HISTEC is scheduled for flight test on the ACTIVE F-15 aircraft at the NASA Dryden Flight Research Center in Edwards, California, in late 1996.

Source record↗
NASA NTRS1972

Computation of the wind by forced adjustment to the height field.

Experimental study of the problem of the forced adjustment of the wind field to the height field with the Mintz-Arakawa two-level atmospheric general circulation model. In all but one of the experiments, the height field was assumed to be perfectly observed at 6-hr intervals, over a time period of one day or less, and from these height data the vector wind field was computed by forced dynamical adjustment. In one experiment, the temperature alone was prescribed. The winds computed in these experiments were compared with the 'control' winds of the general circulation simulation. The best agreement between the computed and the control winds was obtained when the time-differencing scheme in the governing finite-difference equations of motion had a large rate of damping of high-frequency motions. This damping rate also determined the optimum fraction and frequency of restoration of the height (or temperature) fields. With strong damping, total restoration at every time step gave the most rapid rate of wind error reduction and the smallest asymptotic limit of the wind error.

Mesinger, F.↗
NASA NTRS1973

A suboptimal stochastic controller for an N-body spacecraft

Considerable attention, in the open literature, is being focused on the problem of developing a suitable set of deterministic dynamical equations for a complex spacecraft. This paper considers the problem of determining a stochastic optimal controller for an n-body spacecraft. The approach used in obtaining the stochastic controller involves the application, interpretation, and combination of advanced dynamical principles and the theoretical aspects of modern control theory. The stochastic controller obtained herein for a complicated model of a spacecraft uses sensor angular measurements associated with the base body to obtain smoothed estimates of the entire state vector. It can be easily implemented, and it enables system performance to be significantly improved.

Larson, V.↗
NASA NTRS1976

Vector magnetometer design study: Analysis of a triaxial fluxgate sensor design demonstrates that all MAGSAT Vector Magnetometer specifications can be met

The design of the vector magnetometer selected for analysis is capable of exceeding the required accuracy of 5 gamma per vector field component. The principal elements that assure this performance level are very low power dissipation triaxial feedback coils surrounding ring core flux-gates and temperature control of the critical components of two-loop feedback electronics. An analysis of the calibration problem points to the need for improved test facilities.

Adams, D. F.↗
NASA NTRS1979

Design of robust state feedback controllers via eigenvalue/eigenvector assignment

A new method of selecting a multivariable state feedback controller is presented. The resulting controller simultaneously realizes arbitrary closed-loop eigenvalues, approximates specified modal behavior and achieves low eigensystem sensitivity with respect to plant parameter variations. The method characterizes a vector space slightly larger than the null space of the closed-loop system matrix and projects a desired modal matrix onto this space. Sensitivity of eigenvalues and eigenvectors is then minimized local to the desired modal matrix using a gradient search technique. A tutorial example to illustrate the design procedure is given.

Mielke, R. R.↗
NASA NTRS1979

Applying integrals of motion to the numerical solution of differential equations

A method is developed for using the integrals of systems of nonlinear, ordinary differential equations in a numerical integration process to control the local errors in these integrals and reduce the global errors of the solution. The method is general and can be applied to either scaler or vector integrals. A number of example problems, with accompanying numerical results, are used to verify the analysis and support the conjecture of global error reduction.

Jezewski, D. J.↗
NASA NTRS1980

Applying integrals of motion to the numerical solution of differential equations

A method is developed for using the integrals of systems of nonlinear, ordinary, differential equations in a numerical integration process to control the local errors in these integrals and reduce the global errors of the solution. The method is general and can be applied to either scalar or vector integrals. A number of example problems, with accompanying numerical results, are used to verify the analysis and support the conjecture of global error reduction.

Vezewski, D. J.↗
NASA NTRS1984

Research in applied mathematics, numerical analysis, and computer science

Research conducted at the Institute for Computer Applications in Science and Engineering (ICASE) in applied mathematics, numerical analysis, and computer science is summarized and abstracts of published reports are presented. The major categories of the ICASE research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers.

Source record↗
NASA NTRS1985

An experimental investigation of a swirling, axisymmetric, turbulent boundary layer with pressure gradient

The results of an experimental investigation designed to document data on both mean and turbulence quantities in the axisymmetric, swirling boundary layer (with and without a pressure gradient) flowing over a stationary cylinder downstream of a spinning cylindrical section are discussed. The pressure gradient was introduced into the flow field by a 25.4-mm-high, forward-facing circular step mounted on the stationary cylinder, the step height being nearly equal to the approaching boundary-layer thickness. All the measurements were made at upstream reference velocity of 36-37 m/sec, with the rotation of the spinner set to make its peripheral speed equal to the reference velocity. The data reported include measurements of surface pressure and the mean surface-shear-stress vector (using a miniature directional surface-fence gage) and oil-flow visualization studies of the stationary cylinder. The data indicate that the streamwise pressure gradient controls the development of the streamwise component of wall shear but leaves the peripheral component of wall shear practically unaffected.

Hebbar, S. K.↗
NASA NTRS1986

Necessary and sufficient conditions for parameter convergence in adaptive control

Using Generalized Harmonic Analysis, a complete description of parameter convergence in Model Reference Adaptive Control (MRAC) is given in terms of the spectrum of the exogenous reference input signal. Roughly speaking, if the reference signal 'contains enough frequencies' then the parameter vector converges to its correct value. If not, it converges to an easily characterizable subspace in parameter space.

Boyd, Stephen↗
NASA NTRS1989

Modal techniques for analyzing airplane dynamics

A series of techniques are presented for analyzing airplane control and output characteristics. State-space matrix equations describing the linear perturbation dynamics are transformed from physical coordinates into scaled, modal coordinates. Techniques for analyzing the impacts of system inputs on the fundamental modes of motion and the appearance of these modes in the system outputs are explained. Scaled modal matrices are used to compute steady-state control inputs which optimize the steady-state response of selected system outputs. Graphics which promote quick understanding of the analysis are presented to display the resulting vectors and matrices. The defined analysis techniques are applied to an example airplane model, illustrating the insight which can be acquired using the described modal techniques.

Arbuckle, P. Douglas↗
NASA NTRS1990

Numerical simulation of steady and unsteady asymmetric vortical flow

The unsteady, compressible, thin-layer, Navier-Stokes equations are solved to simulate steady and unsteady, asymmetric, vortical laminar flow around cones at high incidences and supersonic Mach numbers. The equations are solved by using an implicit, upwind, flux-difference splitting, finite-volume scheme. Locally conical flows are assumed and the solutions are obtained by forcing the conserved components of the flowfield vector to be equal at two axial stations located at 0.95 and 1.0. Computational examples cover steady and unsteady asymmetric flows around a circular cone and its control using side strakes. Unsteady asymmetric flows are also presented for elliptic- and diamond-section cones, which model asymmetric vortex shedding around round and sharp-edged delta wing flows.

Kandil, O. A.↗
NASA NTRS1991

Assured crew return vehicle

A return vehicle is disclosed for use in returning a crew to Earth from low earth orbit in a safe and relatively cost effective manner. The return vehicle comprises a cylindrically-shaped crew compartment attached to the large diameter of a conical heat shield having a spherically rounded nose. On-board inertial navigation and cold gas control systems are used together with a de-orbit propulsion system to effect a landing near a preferred site on the surface of the Earth. State vectors and attitude data are loaded from the attached orbiting craft just prior to separation of the return vehicle.

Cerimele, Christopher J.↗
NASA NTRS1994

Overview of the MSTI 2 on-orbit alignment

The Miniature Sensor Technology Integration (MSTI) 2 Spacecraft is a small 3-axis stabilized spacecraft designed to track mid-range missiles and estimate their state vectors. In order to accurately estimate the target state vector, the MSTI 2 spacecraft must have highly accurate knowledge of its own attitude. Errors in its attitude knowledge arise primarily from the errors in its Attitude Control System (ACS) sensors. The ACS sensors on the spacecraft include a scanning Earth Sensor (ES), a Sun Sensor (SS), and two 2-axis gyros. The On-Orbit Alignment (OOA) generated an error map of the ES and estimated the biases of the SS and the misalignment of the gyros. This paper discusses some of the error sources, and the techniques used to reduce the effects of these errors. The payload carried by the MSTI2 spacecraft is a high fidelity camera, which was aimed at the target using gimballed mirrors. By aiming it at a celestial target, the payload was used as a high-accuracy single-axis attitude reference. This attitude reference was compared to the attitude reference of the ACS sensors, and the errors were attributed to the ACS sensors.

Rygaard, Christopher A.↗
NASA NTRS2011

Solar Radiation Pressure Binning for the Geosynchronous Orbit

Orbital maintenance parameters for individual satellites or groups of satellites have traditionally been set by examining orbital parameters alone, such as through apogee and perigee height binning; this approach ignored the other factors that governed an individual satellite's susceptibility to non-conservative forces. In the atmospheric drag regime, this problem has been addressed by the introduction of the "energy dissipation rate," a quantity that represents the amount of energy being removed from the orbit; such an approach is able to consider both atmospheric density and satellite frontal area characteristics and thus serve as a mechanism for binning satellites of similar behavior. The geo-synchronous orbit (of broader definition than the geostationary orbit -- here taken to be from 1300 to 1800 minutes in orbital period) is not affected by drag; rather, its principal non-conservative force is that of solar radiation pressure -- the momentum imparted to the satellite by solar radiometric energy. While this perturbation is solved for as part of the orbit determination update, no binning or division scheme, analogous to the drag regime, has been developed for the geo-synchronous orbit. The present analysis has begun such an effort by examining the behavior of geosynchronous rocket bodies and non-stabilized payloads as a function of solar radiation pressure susceptibility. A preliminary examination of binning techniques used in the drag regime gives initial guidance regarding the criteria for useful bin divisions. Applying these criteria to the object type, solar radiation pressure, and resultant state vector accuracy for the analyzed dataset, a single division of "large" satellites into two bins for the purposes of setting related sensor tasking and orbit determination (OD) controls is suggested. When an accompanying analysis of high area-to-mass objects is complete, a full set of binning recommendations for the geosynchronous orbit will be available.

Hejduk, M. D.↗
NASA NTRS2016

Stopped-Rotor Cyclocopter for Venus Exploration

The cyclocopter system can use two or more rotating blades to create lift, propulsion and control. This system is explored for its use in a mission to Venus. Cyclocopters are not limited to speed and altitude and can provide 360 degrees of vector thrusting which is favorable for good maneuverability. The novel aspect of this study is that no other cyclocopter configuration has been previously proposed for Venus or any (terrestrial or otherwise) exploration application where the cyclocopters rotating blades are stopped, and act as fixed wings. The design considerations for this unique planetary aerial vehicle are discussed in terms of implementing the use of a cyclorotor blade system combined with a fixed wing and stopped rotor mechanism. This proposed concept avoids many of the disadvantages of conventional-rotor stopped-rotor concepts and accounts for the high temperature, pressure and atmospheric density present on Venus while carrying out the mission objectives. The fundamental goal is to find an ideal design that implements the combined use of cyclorotors and fixed wing surfaces. These design concepts will be analyzed with the computational fluid dynamics tool RotCFD for aerodynamic assessment. Aspects of the vehicle design is 3D printed and tested in a small water tunnel or wind tunnel.

Husseyin, Sema↗
NASA NTRS1993

Determination of the stability and control derivatives of the NASA F/A-18 HARV using flight data

This report documents the research conducted for the NASA-Ames Cooperative Agreement No. NCC 2-759 with West Virginia University. A complete set of the stability and control derivatives for varying angles of attack from 10 deg to 60 deg were estimated from flight data of the NASA F/A-18 HARV. The data were analyzed with the use of the pEst software which implements the output-error method of parameter estimation. Discussions of the aircraft equations of motion, parameter estimation process, design of flight test maneuvers, and formulation of the mathematical model are presented. The added effects of the thrust vectoring and single surface excitation systems are also addressed. The results of the longitudinal and lateral directional derivative estimates at varying angles of attack are presented and compared to results from previous analyses. The results indicate a significant improvement due to the independent control surface deflections induced by the single surface excitation system, and at the same time, a need for additional flight data especially at higher angles of attack.

Napolitano, Marcello R.↗