Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Transition to turbulence in viscoelastic channel flow of dilute polymer solutions

The transition to turbulence in a plane Poiseuille flow of dilute polymer solutions is studied by direct numerical simulations of a finitely extensible nonlinear elastic fluid with the Peterlin closure. The range of Reynolds number ($Re$)$2000 \le Re \le 5000$is studied but with the same level of elasticity in viscoelastic flows. The evolution of a finite-amplitude perturbation and its effects on the transition dynamics are investigated. A viscoelastic flow begins transition at an earlier time than its Newtonian counterparts, but the transition time appears to be insensitive to polymer concentration in the dilute and semi-dilute regimes studied. Increasing polymer concentration, however, decreases the maximum attainable energy growth during the transition process. The critical or minimum perturbation amplitude required to trigger transition is computed. Interestingly, both Newtonian and viscoelastic flows follow almost the same power-law scaling of$Re^\gamma$with the critical exponent$\gamma \approx -1.25$, which is in close agreement with previous studies. However, a shift downward is observed for viscoelastic flow, suggesting that smaller perturbation amplitudes are required for the transition. A mechanism of the early transition is investigated by the evolution of wall-normal and spanwise velocity fluctuations and flow structure. The early growth of these fluctuations and the formation of quasi-streamwise vortices around low-speed streaks are promoted by polymers, hence causing an early transition. These vortical structures are found to support the critical exponent$\gamma \approx -1.25$. Once the transition process is completed, polymers play a role in dampening the wall-normal and spanwise velocity fluctuations and vortices to attain a drag-reduced state in viscoelastic turbulent flows.

Mechanics↗

Direct measurement of the alpha-epsilon transition stress and kinetics for shocked iron

Iron undergoes a polymorphic phase transformation from alpha phase (bcc) to the epsilon phase (hcp) when compressed to stresses exceeding 13 CPa. Bccause the epsilon phase is denser than the alpha phase, a single shock wave is unstable and breaks up into an elastic wave, a plastic wave, and a phase transition wave. Examination of this structured wave coupled with various phase transformation models has been used to indirectly examine the transition kinetics. Recently, multimillion atom simulations (molecular dynamics) have been used to examine the shock-induced transition in single crystal iron illustrating an orientation dependence of the transition stress, mechanisms, and kinetics. The objective of the current work was to perform plate impact experiments to examine the shock-response of polycrystalline and single crystal iron with nanosecond resolution for impact stresses spanning the {alpha} - {epsilon} transition. The current data reveal an orientation dependence of the transition stress coupled with a transition time that is nonlinearly dependent on the impact stress with a duration ranging from picoseconds to hundreds of nanoseconds. The higher transition stress for iron[100] is in agreement with the predictions from MD calculations that describe an orientation dependence of the transition stress. However, MD calculations do not capture the complexity of the continuum states achieved or the transition kinetics. Further results and implications are discussed in this paper.

66↗

Temperature dependence of the optical transitions in Ga{sub 0.64}In{sub 0.36}N{sub 0.046}As{sub 0.954} multiquantum wells of various widths studied by photoreflectance

The temperature dependencies of optical transitions in as-grown Ga{sub 0.64}In{sub 0.36}N{sub 0.046}As{sub 0.954} multiple quantum wells (QWs) of various widths (ranging from 3.9 to 8.1 nm) grown at the low temperature of 375 deg. C were studied by photoreflectance (PR). In addition to the 11H transition, which is the fundamental transition for this QW, the optical transitions between excited states (22H and 33H transitions, where the notation klH denotes the transition between the kth heavy-hole valence subband and the lth conduction subband) were clearly observed in the PR spectra. The temperature dependencies of the QW transition energies were analyzed using Varshni and Bose-Einstein expressions. It was found that with increasing temperature, both the ground-state and the excited-state transitions shift to the red without showing S-shape-type behaviors, which are typical for photoluminescence from this system. This shift does not depend on the QW width and amounts to approx80 meV for the 11H transition and approx100 meV for the 22H and 33H transitions in the temperature range of 10-300 K. These shifts are comparable to those of N-free QWs.

36 MATERIALS SCIENCE↗

Comparison of bifurcation dynamics of turbulent transport models for the L-H transition

In more than three decades, a large amount of models and mechanisms have been proposed to describe a very beneficial feature of magnetically confined fusion plasmas: the L-H transition. Bifurcation theory can be used to compare these different models based on their dynamical transition structure. In this paper, we employ bifurcation theory to distinguish two fundamentally different descriptions of the interaction between turbulence levels and sheared flows. The analytic bifurcation analysis characterises the parameter space structure of the transition dynamics. Herewith, in these models three dynamically different types of transitions are characterised, sharp transitions, oscillatory transitions, and smooth transitions. One of the two models has a very robust transition structure and is therefore likely to be more accurate for such a robust phenomenon as the L-H transition. The other model needs more fine-tuning to get non-oscillatory transitions. These conclusions from the analytic bifurcation analysis are confirmed by dedicated numerical simulations, with the newly developed code Bifurcator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic coupling calculations with transition charges, dipoles, and quadrupoles derived from electrostatic potential fitting

A transition charge, dipole, and quadrupole from electrostatic potential (TrESP-CDQ) method for electronic coupling calculations is proposed. The TrESP method is based on the classical description of electronic Coulomb interaction between transition densities for individual molecules. In the original TrESP method, only the transition charge interactions were considered as the electronic coupling. In the present study, the TrESP method is extended to include the contributions from the transition dipoles and quadrupoles as well as the transition charges. Hence, the self-consistent transition density is employed in the ESP fitting procedure. To check the accuracy of the present approach, several test calculations are performed to a helium dimer, a methane dimer, and an ethylene dimer. As a result, the TrESP-CDQ method gives a much improved description of the electronic coupling, compared with the original TrESP method. The calculated results also show that the self-consistent treatment to the transition densities contributes significantly to the accuracy of the electronic coupling calculations. Based on the successful description of the electronic coupling, the contributions to the electronic coupling are also analyzed. This analysis clearly shows a negligible contribution of the transition charge interaction to the electronic coupling. Hence, the distribution of the transition density is found to strongly influence the magnitudes of the transition charges, dipoles, and quadrupoles. The present approach is useful for analyzing and understanding the mechanism of excitation-energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The phase transition in VO 2 probed using x-ray, visible and infrared radiations

Vanadium dioxide (VO 2 ) is a model system that has been used to understand closely occurring multiband electronic (Mott) and structural (Peierls) transitions for over half a century due to continued scientific and technological interests. Among the many techniques used to study VO 2 , the most frequently used involve electromagnetic radiation as a probe. Understanding of the distinct physical information provided by different probing radiations is incomplete, mostly owing to the complicated nature of the phase transitions. Here, we use transmission of spatially averaged infrared (λ = 1.5 μm) and visible (λ = 500 nm) radiations followed by spectroscopy and nanoscale imaging using x-rays (λ = 2.25–2.38 nm) to probe the same VO 2 sample while controlling the ambient temperature across its hysteretic phase transitions and monitoring its electrical resistance. We directly observed nanoscale puddles of distinct electronic and structural compositions during the transition. The two main results are that, during both heating and cooling, the transition of infrared and visible transmission occurs at significantly lower temperatures than the Mott transition, and the electronic (Mott) transition occurs before the structural (Peierls) transition in temperature. We use our data to provide insights into possible microphysical origins of the different transition characteristics. We highlight that it is important to understand these effects because small changes in the nature of the probe can yield quantitatively, and even qualitatively, different results when applied to a non-trivial multiband phase transition. Our results guide more judicious use of probe type and interpretation of the resulting data.

36 MATERIALS SCIENCE↗

HAT-P-20b-HAT-P-23b: FOUR MASSIVE TRANSITING EXTRASOLAR PLANETS

We report the discovery of four relatively massive (2-7 M{sub J}) transiting extrasolar planets. HAT-P-20b orbits the moderately bright V = 11.339 K3 dwarf star GSC 1910-00239 on a circular orbit, with a period P = 2.875317 {+-} 0.000004 days, transit epoch T{sub c} = 2455080.92661 {+-} 0.00021 (BJD{sub UTC}), and transit duration 0.0770 {+-} 0.0008 days. The host star has a mass of 0.76 {+-} 0.03 M{sub Sun }, radius of 0.69 {+-} 0.02 R{sub Sun }, effective temperature 4595 {+-} 80 K, and metallicity [Fe/H] = +0.35 {+-} 0.08. The planetary companion has a mass of 7.246 {+-} 0.187 M{sub J} and a radius of 0.867 {+-} 0.033 R{sub J} yielding a mean density of 13.78 {+-} 1.50 g cm{sup -3}. HAT-P-21b orbits the V = 11.685 G3 dwarf star GSC 3013-01229 on an eccentric (e = 0.228 {+-} 0.016) orbit, with a period P = 4.124481 {+-} 0.000007 days, transit epoch T{sub c} = 2454996.41312 {+-} 0.00069, and transit duration 0.1530 {+-} 0.0027 days. The host star has a mass of 0.95 {+-} 0.04 M{sub Sun }, radius of 1.10 {+-} 0.08 R{sub Sun }, effective temperature 5588 {+-} 80 K, and metallicity [Fe/H] = +0.01 {+-} 0.08. The planetary companion has a mass of 4.063 {+-} 0.161 M{sub J} and a radius of 1.024 {+-} 0.092 R{sub J} yielding a mean density of 4.68{sup +1.59}{sub -0.99} g cm{sup -3}. HAT-P-21b is a borderline object between the pM and pL class planets, and the transits occur near apastron. HAT-P-22b orbits the bright V = 9.732 G5 dwarf star HD 233731 on a circular orbit, with a period P = 3.212220 {+-} 0.000009 days, transit epoch T{sub c} = 2454930.22001 {+-} 0.00025, and transit duration 0.1196 {+-} 0.0014 days. The host star has a mass of 0.92 {+-} 0.03 M{sub Sun }, radius of 1.04 {+-} 0.04 R{sub Sun }, effective temperature 5302 {+-} 80 K, and metallicity [Fe/H] = +0.24 {+-} 0.08. The planet has a mass of 2.147 {+-} 0.061 M{sub J} and a compact radius of 1.080 {+-} 0.058 R{sub J} yielding a mean density of 2.11{sup +0.40}{sub -0.29} g cm{sup -3}. The host star also harbors an M-dwarf companion at a wide separation. Finally, HAT-P-23b orbits the V = 12.432 G0 dwarf star GSC 1632-01396 on a close to circular orbit, with a period P = 1.212884 {+-} 0.000002 days, transit epoch T{sub c} = 2454852.26464 {+-} 0.00018, and transit duration 0.0908 {+-} 0.0007 days. The host star has a mass of 1.13 {+-} 0.04 M{sub Sun }, radius of 1.20 {+-} 0.07 R{sub Sun }, effective temperature 5905 {+-} 80 K, and metallicity [Fe/H] = +0.15 {+-} 0.04. The planetary companion has a mass of 2.090 {+-} 0.111 M{sub J} and a radius of 1.368 {+-} 0.090 R{sub J} yielding a mean density of 1.01 {+-} 0.18 g cm{sup -3}. HAT-P-23b is an inflated and massive hot Jupiter on a very short period orbit, and has one of the shortest characteristic infall times (7.5{sup +2.9}{sub -1.8} Myr) before it gets engulfed by the star.

79 ASTRONOMY AND ASTROPHYSICS↗

STELLAR TRANSITS IN ACTIVE GALACTIC NUCLEI

Supermassive black holes (SMBHs) are typically surrounded by a dense stellar population in galactic nuclei. Stars crossing the line of site in active galactic nuclei (AGNs) produce a characteristic transit light curve, just like extrasolar planets do when they transit their host star. We examine the possibility of finding such AGN transits in deep optical, UV, and X-ray surveys. We calculate transit light curves using the Novikov-Thorne thin accretion disk model, including general relativistic effects. Based on the expected properties of stellar cusps, we find that around 10{sup 6} solar mass SMBHs, transits of red giants are most common for stars on close orbits with transit durations of a few weeks and orbital periods of a few years. We find that detecting AGN transits requires repeated observations of thousands of low-mass AGNs to 1% photometric accuracy in optical, or {approx}10% in UV bands or soft X-ray. It may be possible to identify stellar transits in the Pan-STARRS and LSST optical and the eROSITA X-ray surveys. Such observations could be used to constrain black hole mass, spin, inclination, and accretion rate. Transit rates and durations could give valuable information on the circumnuclear stellar clusters as well. Transit light curves could be used to image accretion disks with unprecedented resolution, allowing us to resolve the SMBH silhouette in distant AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗

SPITZER TRANSITS OF THE SUPER-EARTH GJ1214b AND IMPLICATIONS FOR ITS ATMOSPHERE

We observed the transiting super-Earth exoplanet GJ1214b using warm Spitzer at 4.5 {mu}m wavelength during a 20 day quasi-continuous sequence in 2011 May. The goals of our long observation were to accurately define the infrared transit radius of this nearby super-Earth, to search for the secondary eclipse, and to search for other transiting planets in the habitable zone of GJ1214. We here report results from the transit monitoring of GJ1214b, including a reanalysis of previous transit observations by Desert et al. In total, we analyze 14 transits of GJ1214b at 4.5 {mu}m, 3 transits at 3.6 {mu}m, and 7 new ground-based transits in the I+z band. Our new Spitzer data by themselves eliminate cloudless solar composition atmospheres for GJ1214b, and methane-rich models from Howe and Burrows. Using our new Spitzer measurements to anchor the observed transit radii of GJ1214b at long wavelengths, and adding new measurements in I+z, we evaluate models from Benneke and Seager and Howe and Burrows using a {chi}{sup 2} analysis. We find that the best-fit model exhibits an increase in transit radius at short wavelengths due to Rayleigh scattering. Pure water atmospheres are also possible. However, a flat line (no atmosphere detected) remains among the best of the statistically acceptable models, and better than pure water atmospheres. We explore the effect of systematic differences among results from different observational groups, and we find that the Howe and Burrows tholin-haze model remains the best fit, even when systematic differences among observers are considered.

79 ASTRONOMY AND ASTROPHYSICS↗

THE QUASIPERIODIC AUTOMATED TRANSIT SEARCH ALGORITHM

We present a new algorithm for detecting transiting extrasolar planets in time-series photometry. The Quasiperiodic Automated Transit Search (QATS) algorithm relaxes the usual assumption of strictly periodic transits by permitting a variable, but bounded, interval between successive transits. We show that this method is capable of detecting transiting planets with significant transit timing variations without any loss of significance-{sup s}mearing{sup -}as would be incurred with traditional algorithms; however, this is at the cost of a slightly increased stochastic background. The approximate times of transit are standard products of the QATS search. Despite the increased flexibility, we show that QATS has a run-time complexity that is comparable to traditional search codes and is comparably easy to implement. QATS is applicable to data having a nearly uninterrupted, uniform cadence and is therefore well suited to the modern class of space-based transit searches (e.g., Kepler, CoRoT). Applications of QATS include transiting planets in dynamically active multi-planet systems and transiting planets in stellar binary systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Hubble Space Telescope observations of the NUV transit of WASP-12b

We present new observations of four closely spaced near-ultraviolet (NUV) transits of the hot Jupiter-like exoplanet WASP-12b using Hubble Space Telescope (HST)/Cosmic Origins Spectrograph (COS), significantly increasing the phase resolution of the observed NUV light curve relative to previous observations, while minimizing the temporal variation of the system. We observe significant excess NUV absorption during the transit, with mean normalized in-transit fluxes of F{sub norm}≃0.97, i.e., ≃2–5σ deeper than the optical transit level of ≃0.986 for a uniform stellar disk (the exact confidence level depending on the normalization method used). We further observe an asymmetric transit shape, such that the post-conjunction fluxes are overall ≃2–3σ higher than pre-conjunction values, and characterized by rapid variations in count rate between the pre-conjunction and out-of-transit levels. We do not find evidence for an early ingress to the NUV transit as suggested by earlier HST observations. However, we show that the NUV count rate observed prior to the optical transit is highly variable, but overall ≃2.2–3.0σ below the post-transit values and comparable in depth to the optical transit, possibly forming a variable region of NUV absorption from at least phase ϕ≃0.83, limited by the data coverage.

79 ASTRONOMY AND ASTROPHYSICS↗

REVISED ORBIT AND TRANSIT EXCLUSION FOR HD 114762b

Transiting planets around bright stars have allowed the detailed follow-up and characterization of exoplanets, such as the study of exoplanetary atmospheres. The Transit Ephemeris Refinement and Monitoring Survey is refining the orbits of the known exoplanets to confirm or rule out both transit signatures and the presence of additional companions. Here we present results for the companion orbiting HD 114762 in an eccentric 84 day orbit. Radial velocity analysis performed on 19 years of Lick Observatory data constrain the uncertainty in the predicted time of mid-transit to {approx}5 hr, which is less than the predicted one-half day transit duration. We find no evidence of additional companions in this system. New photometric observations with one of our Automated Photoelectric Telescopes at Fairborn Observatory taken during a revised transit time for companion b, along with 23 years of nightly automated observations, allow us to rule out on-time central transits to a limit of {approx}0.001 mag. Early or late central transits are ruled out to a limit of {approx}0.002 mag, and transits with half the duration of a central transit are ruled out to a limit of {approx}0.003 mag.

79 ASTRONOMY AND ASTROPHYSICS↗

Atomic and itinerant effects at the transition-metal x-ray adsorption K pre-edge exemplified in the case of V{sub 2}O{sub 3}.

X-ray absorption spectroscopy is a well-established tool for obtaining information about orbital and spin degrees of freedom in transition-metal and rare-earth compounds. For this purpose usually the dipole transitions of the L (2p to 3d) and M (3d to 4f) edges are employed, whereas higher order transitions such as quadrupolar 1s to 3d in the K edge are rarely studied in that respect. This is due to the fact that usually such quadrupolar transitions are overshadowed by dipole-allowed 1s to 4p transitions and, hence, are visible only as minor features in the pre-edge region. Nonetheless, these features carry a lot of valuable information, similar to the dipole L-edge transition, which is not accessible in experiments under pressure due to the absorption of the diamond anvil pressure cell. We recently performed a theoretical and experimental analysis of such a situation for the metal-insulator transition of (V{sub (1-x)}Cr{sub x}){sub 2}O{sub 3}. Since the importance of the orbital degrees of freedom in this transition is widely accepted, a thorough understanding of quadrupole transitions of the vanadium K pre-edge provides crucial information about the underlying physics. Moreover, the lack of inversion symmetry at the vanadium site leads to on-site mixing of vanadium 3d and 4p states and related quantum mechanical interferences between dipole and quadrupole transitions. Here we present a theoretical analysis of experimental high-resolution x-ray absorption spectroscopy at the V K pre-edge measured in partial fluorescence yield mode for single crystals. We carried out density functional as well as configuration interaction calculations in order to capture effects coming from both itinerant and atomic limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of fluctuations on electron and phonon processes and thermodynamic parameters of Ag{sub 2}Te and Ag{sub 2}Se in the region of phase transition

Temperature dependences of electrical conductivity {sigma}, thermoelectric power {alpha}, results of differential thermal analysis {delta}T{sub y}, thermal conductivity {chi}, temperature conductivity {kappa}, and heat capacity C{sub p} were studied in Ag{sub 2}Te and Ag{sub 2}Se semiconductors in the region of the phase transition. Two extrema are observed in the temperature dependence {chi}(T): a maximum in the region of the {alpha}' {sup {yields}} {beta}' transition and a minimum in the region of the {beta}' {sup {yields}} {beta} transition; these extrema are caused by the similar dependence C{sub p}(T). It is shown that the {alpha} {sup {yields}} {alpha}' and {beta}' {sup {yields}} {beta} transitions are displacement transitions, while the {alpha}' {sup {yields}} {beta}' transition is of reconstruction type. It is established that the disorder parameter {eta} in silver chalcogenides is highly smeared in the region of the phase transition; therefore, disordering of phases at the point of the phase transition is incomplete: 73, 62, and 48% in Ag{sub 2}Te, Ag{sub 2}Se, and Ag{sub 2}S, respectively. The minimum volumes V{sub ph} for new phases are calculated; it is shown that the value of V{sub ph} in displacement transitions is larger than in the reconstruction-type transitions.

36 MATERIALS SCIENCE↗

Detecting Rain–Snow-Transition Elevations in Mountain Basins Using Wireless Sensor Networks

Here, to provide complementary information on the hydrologically important rain–snow-transition elevation in mountain basins, this study provides two estimation methods using ground measurements from basin-scale wireless sensor networks: one based on wet-bulb temperature T wet and the other based on snow-depth measurements of accumulation and ablation. With data from 17 spatially distributed clusters (178 nodes) from two networks, in the American and Feather River basins of California’s Sierra Nevada, we analyzed transition elevation during 76 storm events in 2014–18. A T wet threshold of 0.5°C best matched the transition elevation defined by snow depth. Transition elevations using T wet in upper elevations of the basins generally agreed with atmospheric snow level from radars located at lower elevations, while radar snow level was ~100 m higher due to snow-level lowering on windward mountainsides during orographic lifting. Diurnal patterns of the difference between transition elevation and radar snow level were observed in the American basin, related to diurnal ground-temperature variations. However, these patterns were not found in the Feather basin due to complex terrain and higher uncertainties in transition-elevation estimates. The American basin tends to exhibit 100-m-higher transition elevations than does the Feather basin, consistent with the Feather basin being about 1° latitude farther north. Transition elevation averaged 155 m higher in intense atmospheric river events than in other events; meanwhile, snow-level lowering was enhanced with a 90-m-larger difference between radar snow level and transition elevation. On-the-ground continuous observations from distributed sensor networks can complement radar data and provide important ground truth and spatially resolved information on transition elevations in mountain basins.

54 ENVIRONMENTAL SCIENCES↗

Pressure-induced phase transitions in Ni-bearing ferrosilite (Ni-En31Fs65)

Abstract Orthopyroxene is an abundant mineral in subducting slabs. Studying its phase transitions at high pressure is important to the understanding of mineralogy of subducting slabs in the deep Earth. Synchrotron-based single-crystal X-ray diffraction experiments were conducted on a synthetic Ni-bearing ferrosilite (Ni-En31Fs65) at pressures up to 33.8 GPa. Three phase transitions were observed at 12.1(6), 15.6(6), and 31.3(25) GPa. The first two phase transitions in Ni-En31Fs65 resemble the previously described phase transitions in Ni-free Fe-rich orthopyroxenes, i.e., the initial α-opx (Pbca) transforms to β-opx (P21/c), then the latter transforms to γ-opx (Pbca). This indicates that the incorporation of a few mol% NiSiO3 does not influence the phase transition path of Fe-rich orthopyroxene. After the third phase transition, the structure (P21ca) of Ni-En31Fs65 resembles the previously reported β-popx observed in En90 at high pressure, although the onset pressure of the phase transition in Ni-En31Fs65 is ~7 GPa lower than that in En90. β-popx has a post-pyroxene structure that contains fivefold- and sixfold-coordinated Si cations. Our results indicate that the post-pyroxene structure is β-popx (P21ca) for either Fe-poor or Fe-rich orthopyroxenes, although the phase transition path before the pyroxene → post-pyroxene is compositionally dependent. Additionally, unlike the second and third transitions, whose onset pressures are monotonously decreased by increasing Fe content, the Fe effect on shifting the first transition is much more significant for orthopyroxenes within En <50 mol% than that within En >50 mol%.

Geochemistry & Geophysics↗

Transition Core Planning and Safety Analyses in Support of LEU Fuel Conversion of the University of Missouri Research Reactor (MURR)

The University of Missouri Research Reactor (MURR®) is one of six U.S. High Performance Research Reactors (USHPRR), including one critical facility, that is working with the National Nuclear Security Administration (NNSA) Office of Material Management and Minimization (M3) Reactor Conversion Program to convert from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel. The M3 Reactor Conversion USHPRR Project objectives include the development of LEU fuel element designs that will ensure safe reactor operations and to maintain the existing experimental performance of each facility. The work is being conducted through many inter-related activities being completed by four Project Pillars: Fuel Qualification (FQ), Fuel Fabrication (FF), Reactor Conversion (RC), and Cross Cutting (CC). A new type of LEU fuel based on an alloy of uranium-10 wt% molybdenum (U-10Mo) is expected to allow the conversion of those USHPRR, like MURR, requiring higher density fuels. The very-high-density LEU U-10Mo monolithic fuel is currently undergoing irradiation testing and post-irradiation examination under a planned and documented fuel qualification effort. The FQ Pillar will document fuel property and fuel performance data and qualify the fuel for use in these reactors. The FF Pillar is fabricating fuel for ongoing and future irradiation tests, as well as conducting fabrication demonstrations to validate or update preliminary fabrication assumptions. The FF Pillar is also working to develop and install commercial manufacturing capacity with the U-10Mo monolithic fuel to produce prototypic fuel. Working with the RC Pillar at Argonne, MURR has progressed through a preliminary fuel element design using preliminary data for the proposed monolithic alloy of U-10Mo. Analyses were completed in previous work that found for typical equilibrium operations with the preliminary LEU fuel element design, in conjunction with a power uprate to 12 MW and appropriate changes to the MURR Limiting safety system settings (LSSS), MURR will have adequate margins to safety for steady-state operations and postulated transient accidents and will have experimental performance in key locations that meets or exceeds current operations with HEU fuel. The purpose of this work is to develop a sequence of transition cycles that will enable MURR to transition from operation with the reactor core loaded with fresh LEU fuel elements only to typical equilibrium operations with mixed-burnup cores following conversion while meeting operational requirements on safety and experimental performance. It is expected that the use of fresh LEU fuel at conversion and subsequent low burnup of the LEU fuel elements that will initially be available for use following conversion will result in critical control blade positions that will substantially change the axial power distribution in the core and the neutron flux available in key experimental locations relative to equilibrium LEU operations. Given the constraints of MURR safety margins, operational practices, and production and research, a novel method has been developed to identify a transition sequence that minimizes the time MURR operates atypically compared to the current prototypic cycles using HEU fuel. The proposed transition sequence moves quickly to the same sort of equilibrium cycles for the LEU fuel that have already been evaluated in documented preliminary safety analyses. Although shifting the neutron flux peak to the lower half of the core during initial cycles with LEU at 12 MW reduces the experiment performance in some key locations relative to current HEU operations at 10 MW, all LEU cores provide an average performance that meets or exceeds that of HEU. An LEU cycle is reached that meets or exceeds the level of experimental performance predicted for current HEU and equilibrium LEU operations in more than 450 key locations identified by a reactor specialist at MURR by the 23rd cycle following conversion and that afterwards will enable MURR to consistently meet its experimental performance requirements. The proposed transition sequence only requires the fabrication of 34 fresh LEU elements in the first year of operation and does not exceed the anticipated availability of fresh elements that can be produced by the fuel fabricator. By the third year after conversion, 22 fresh LEU elements will be required each year, which is the same as expected for equilibrium LEU operations and the same as current operations with HEU fuel. The proposed transition sequence thus combines a relatively short time period before equilibrium burnup is achieved, a temporary increase of fuel elements needed annually relative to typical operations that are within the production capabilities of the fuel fabricator, and demonstrates comparable experimental performance of the LEU cores relative to current HEU operations. Further measures may be taken to reduce any initial experimental performance penalty even further, where possible, by repositioning certain experiments to leverage the increased performance in the lower axial experimental positions in the initial cycles following conversion or leaving the experiments in the irradiation facilities longer in order to achieve the required neutron fluence. This analysis may require refinement depending on the experimental facilities in use at the time of conversion. Nonetheless, the results presented here, including the experimental performance, core burnup, and critical control blade positions throughout the transition cycles, show that the proposed transition cycle fuel management patterns are consistent with what is expected and desired for MURR operation with LEU U-10Mo fuel. Detailed core power distributions from the neutronics models were also used to evaluate safety margins during steady-state operations for the selected transition cycles and the equilibrium LEU core. It is shown that there are adequate safety margins for both steady-state operations and postulated accident scenarios. For the steady-state operations with the preliminary LEU fuel element design the analysis predicts at least 2.49 MW margin to the onset of flow instability at the LSSS power of 15 MW. Considering the LSSS power is 125% of full license power, the margin to OFI is sufficient. In addition, the critical heat flux ratio at LSSS power is well above the requirement of CHFR > 2.0 from NUREG-1537 for all considered cases. For postulated transient accidents, the minimum margin to the fuel temperature safety limit is at least 109 °C. In summary, the proposed sequence of core loadings for MURR operations following conversion to LEU fuel and a power uprate to 12 MW provides sufficient safety margins for both steady-state operations and postulated transient accidents during a proposed sequence of transition cycles to equilibrium operations. Analysis has shown that there are some local experimental performance penalties during the initial cycles. Although there are local shifts in the experimental performance, on average all LEU cores at 12 MW have equal or higher performance than HEU at 10 MW. Temporary adjustments are being planned that will produce suitable experimental performance during these cycles. The results indicate that for the equilibrium LEU core the experimental performance exceeds that of current HEU operations in all key locations while also demonstrating sufficient safety margins.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Vehicle-Cycle Inventory for Type C School Buses & Intra-City Transit Buses

This report documents the new inventory incorporated into the Research and Development version of Greenhouse gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) 2025 model for the vehicle cycle of Type C school buses and intracity transit buses. The transportation sector contributes significantly to the United States’ energy consumption and resultant emissions (EPA, 2025a). However, public transit plays an important role in mitigating these impacts because it consumes a relatively low amount of energy per passenger (Congressional Budget Office, 2022). Public transit is widely used in the United States; more than 500,000 school buses (EPA, 2025b) and ~75,000 service buses (American Public Transportation Association, 2025) operate in the nation. These are primarily internal combustion engine vehicles (ICEVs) powered by diesel. Original equipment manufacturers (OEMs) are making efforts to electrify U.S. bus fleets by using batteries as a propulsion system to replace internal combustion engines. Electrification can reduce tailpipe emissions, such as particulate matter (with a diameter ≤10 µm [PM 10 ] and with a diameter ≤2.5 µm [PM 2.5 ]) and nitrogen oxides (Jonas et al., 2025; Martinez and Samaras, 2024; EPA, 2025b; Wayne et al., 2009). Hence, any energy and emission impact analysis of public transit must consider both conventional ICEVs and upcoming electric vehicle (EV) options for the school and transit buses that dominate this landscape. To understand the detailed environmental impact profiles of ICEV and EV school and transit buses, it is necessary to conduct a thorough analysis covering both vehicle manufacturing and vehicle use stages. The current literature lacks a detailed vehicle-cycle inventory for school and transit buses, which makes this kind of comparison difficult. To overcome this gap, we developed a comprehensive vehicle-cycle model for school and transit buses in Argonne’s R&D GREET 2025 model. The model is flexible in handling user inputs for key assumptions, such as component weights and material compositions, upstream energy sources for material processing, and vehicle operating parameters, to understand their impacts on energy use and emissions for both school and transit buses. This report is organized as follows: Section 2 provides details on the modeling approach and vehicle specifications (weights and composition of different vehicle components, and vehicle operating parameters) for both school and transit buses. Section 3 provides details on vehicle assembly, disposal, and recycling (ADR) approaches for the two buses. Section 4 includes details about their incorporation into the R&D GREET model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗