Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Processing of KaRIn/SWOT Data

The Surface Water and Ocean Topography (SWOT) mission [1] is part of NASA’s Decadal Survey Program, and prepared jointly by NASA’s Jet Propulsion Laboratory (JPL), the French space agency (CNES), and the Canadian space agency (CSA). Launch is currently foreseen in 2020. The principal instrument KaRIn (Ka-band Radar Interferometer) would be a bistatic SAR system operating at Kaband, with 200 MHz bandwidth, covering 50 km wide near-nadir swaths (1-4° incidence) on both sides of the satellite track. The nominal payload also would include a conventional Ku/C-band nadir altimeter, a water vapor radiometer, and a precise orbit determination suite. Moreover, additional near-nadir channels from KaRIn to reduce the gap between the nominal swaths may be considered. The main mission goals would be to improve the spatio-temporal coverage of the oceans with respect to today’s nadir-looking altimeters (such as the Jason series), by providing measurements on a 1 km2 grid with virtually complete coverage up to ±78° latitude, while keeping a height precision of 1-2 cm, and to extend the altimetry measurements to continental water surfaces, including lakes, reservoirs and wetlands bigger than 250x250 m2 and rivers down to a width of 100 m (50 m as a goal), with a height precision of the order of 10 cm, represented with a horizontal point spacing of about 50 m. The fine scale of the measurements, with continuous acquisition over both oceans and continents, will result in huge data volumes, starting at the spacecraft and flowing through all links of the ground system. Furthermore, the centimetric height accuracy required means that all aspects of the processing must be considered carefully. In this article we give an overview of the foreseen data products and data processing chains for KaRIn on SWOT. Some particularly challenging processing steps are (will be) described in more detail.

Desroches, Damien↗

Spring Dust in Colorado Plateau: Transport Pathways and Interannual Variability Derived From Two Decades of MERRA‐2 Reanalysis

Spring dust storms in the U.S. Southwest significantly impact environmental and human systems, yet their climatological patterns and driving mechanisms remain poorly understood. Using two decades of MERRA-2 reanalysis data and self-organizing map clustering, we identified four distinct dust transport pathways from surrounding and remote deserts for the top 10% of spring dust events impacting the Colorado Plateau: (a) intense southwesterly near-surface transport where eastward upward transport is blocked by topography, (b) substantial remote transport plus weaker surface emissions, (c) moderate southwesterly transport with stronger upper-level transport, and (d) rare northwesterly pattern linked to the Great Basin sources, which accounts for 38%, 14%, 37%, and 11% of total events, respectively. The frequency and intensity of these events strongly correlate with large-scale climate variability, with increased dust events during La Niña. Our results provide a robust framework for improving seasonal dust forecasts and understanding future dust dynamics under climate change.

aerosol transport↗

Removal of Historic Low-Level Radioactive Waste from the Highland Drive South and Alexander Street Ravines - 19155

In Port Hope, the Highland Drive South Ravine (HDSR) is the discharge area for groundwater originating from the closed Highland Drive Landfill site. The presence of low-level radioactive waste (LLRW) in the HDSR is the result of a contaminated groundwater plume flowing from the landfill site. The contaminant plume contains elevated concentrations of uranium and arsenic and extends from the landfill south to discharge groundwater to shallow soils in a wet discharge area within the ravine. The groundwater discharges to Hunt's Ponds and Highland Drive South Creek, which are immediately downstream of the wet discharge area and will be included in the remediation design. Remediation and environmental management plans for HDSR have been developed within the framework of the Port Hope Project. Recent subsurface investigations have identified LLRW at greater depths than previously anticipated. Other investigations of surrounding properties have identified LLRW that is primarily from filling activities in backyards. The steep topography of the site and the presence of the creek and seepage face present remediation challenges. Also in Port Hope, the LLRW in the Alexander Street Ravine Area is the result of end dumping, filling of private backyards and stack deposition from the former refinery. The original site extent was focused on the deeper contamination due to end dumping and included a portion of Alexander Creek. However, recent investigations have confirmed other fill areas and the extent of stack deposition that are generally contiguous with the end dumping area. Restricted access to the site will result in all remediation in this area taking place via a single access point along the narrow existing Hayward Street. While both of these sites are ravines in Port Hope containing LLRW, the origins of contamination and remediation approaches are very different. This paper will compare these two challenging remediation sites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Topographic effect on tilt, strain, and displacement measurements

An approximate analytical method is used to give simple expressions for the effect of arbitrarily shaped topography on vertical, horizontal and surface tilt measurements. Corrections to tilt fields are found to be directly proportional to the local slope of the topography. Comparison is made between expressions for tilt and those for strain and displacement. Although the topographic effects on secular tilt, strain, and vertical displacement are not yet measurable, the topographic effect on precision tidal tilt and strain measurements can be significant.

Meertens, Charles M.↗

STS-99 Flight Crew Post-Landing Press Conference

The primary objective of the STS-99 mission was to complete high resolution mapping of large sections of the Earth's surface using the Shuttle Radar Topography Mission (SRTM), a specially modified radar system that will produced unrivaled 3-D images of the Earth's Surface. The mission was launched at 12:31 on February 11, 2000 onboard the space shuttle Endeavour. The mission was led by Commander Kevin Kregel. The crew was Pilot Dominic L. Pudwill Gorie and Mission Specialists Janet L. Kavandi, Janice E. Voss, Mamoru Mohri, the National Space Development Agency (Japanese Space Agency) and Gerhard P. J. Thiele, from DARA (German Space Agency). The shuttle landed at Kennedy on the February 22, 2000 at 5:22 CST. This tape shows a post landing press conference with the crew. Commander Kregel made a brief statement praising the crew for the mission's success and then introduced the crewmembers. The crew answered questions about the retraction of the mast. The retraction had been successful, but the latches to the canister had failed. The extreme cold may have caused the problem and a solution was proposed from ground control. If this had not worked, an EVA would have been required. The astronauts were confident in the solution to the problem, however they were ready to perform any required EVA. Mamoru Mohri answered questions from the Japanese press, speaking in English and Japanese.

Source record↗

GyPSuM: A Detailed Tomographic Model of Mantle Density and Seismic Wave Speeds

GyPSuM is a tomographic model fo mantle seismic shear wave (S) speeds, compressional wave (P) speeds and detailed density anomalies that drive mantle flow. the model is developed through simultaneous inversion of seismic body wave travel times (P and S) and geodynamic observations while considering realistic mineral physics parameters linking the relative behavior of mantle properties (wave speeds and density). Geodynamic observations include the (up to degree 16) global free-air gravity field, divergence of the tectonic plates, dynamic topography of the free surface, and the flow-induced excess ellipticity of the core-mantle boundary. GyPSuM is built with the philosophy that heterogeneity that most closely resembles thermal variations is the simplest possible solution. Models of the density field from Earth's free oscillations have provided great insight into the density configuration of the mantle; but are limited to very long-wavelength solutions. Alternatively, simply scaling higher resolution seismic images to density anomalies generates density fields that do not satisfy geodynamic observations. The current study provides detailed density structures in the mantle while directly satisfying geodynamic observations through a joint seismic-geodynamic inversion process. Notable density field observations include high-density piles at the base of the superplume structures, supporting the fundamental results of past normal mode studies. However, these features are more localized and lower amplitude than past studies would suggest. When we consider all seismic anomalies in GyPSuM, we find that P and S-wave speeds are strongly correlated throughout the mantle. However, correlations between the high-velocity S zones in the deep mantle ({approx} 2000 km depth) and corresponding P-wave anomalies are very low suggesting a systematic divergence from simplified thermal effects in ancient subducted slab anomalies. Nevertheless, they argue that temperature variations are the primary cause of P-wave, S-wave, and density anomalies in the mantle.

58 GEOSCIENCES↗

STS-99 / Endeavour SRTM Science Briefing and Applications from JSC

The primary objective of the STS-99 mission was to complete high resolution mapping of large sections of the Earth's surface using the Shuttle Radar Topography Mission (SRTM), a specially modified radar system. This radar system produced unrivaled 3-D images of the Earth's Surface. This videotape shows a science press briefing. The panel members are Michael Kobrick, the SRTM Project Scientist at JPL; Thomas Henning, SRTM Program Manager at the National Imagery and Mapping Agency; Diane Evans, the Director of the Earth Sciences Program at NASA; and Marian Werner, XSAR Project Manager for the DLR, Deutschen Zentrum fur Luft- und Raumfahrt, Germany's National Aerospace Research Center. Michael Kobrick explained the mechanics of interferometric measurements of the Earth. He explained and demonstrated with a scale model the deployable mast's use. He also explained the importance of the attitude and orbit determination avionics. A brief animated video showing how four beams would give a 225 km wide swath of the Earth topography was viewed. Thomas Henning discussed some of the usage of the digital terrain elevation data for flood relief planning, cell phone station placement, military planning for command and control centers, and flight simulation. He explained that public access to the most precise data would be limited. Diane Evans described data usage in flood prediction, earthquake fault identification and archeology. Marian Werner described the German and Italian input to the project. The questions from the press concerned the time to process this data, and the reasons for the limited access to the more precise data.

Source record↗

STS-99 Crew Activities Report / Flight Day 09 Highlights

The primary objective of the STS-99 mission was to complete high resolution mapping of large sections of the Earth's surface using the Shuttle Radar Topography Mission (SRTM), a specially modified radar system. This radar system produced unrivaled 3-D images of the Earth's Surface. The mission was launched at 12:31 on February 11, 2000 onboard the space shuttle Endeavour, and led by Commander Kevin Kregel. The crew was Pilot Dominic L. Pudwill Gorie and Mission Specialists Janet L. Kavandi, Janice E. Voss, Mamoru Mohri from the National Space Development Agency (Japanese Space Agency), and Gerhard P. J. Thiele from DARA (German Space Agency). This tape shows the activities of the ninth day of the mission. The announcement of the decision to extend the SRTM for 9 hours is made to the crew. This means that almost all (i.e., 99.9 %) of the target area of the Earth will be imaged, at least once. Some shots of the 200 foot long mast where the outboard antennas are located are shown. Mamoru Mohri is shown changing a data tape, while he explains the rationale for recording rather than transmitting the data. Gerhard Thiele speaks to the German press. At the end of this tape are images generated from the SRTM. There are views of Oahu, Molokai, Lanai and west Maui, Hawaii; Dallas, Texas; Salalah, Oman; and Tasmania, Australia. Animations showing the topography around Hokkaido, Japan and Brazil are also shown.

Source record↗

Improving coastal water level estimation by merging nadir-only satellite altimetry data into a hydrodynamic model

Providing robust real time flood warnings is of paramount importance to coastal communities. Although state-of-the-art hydrodynamic models are capable of robustly predicting Coastal Water Levels (CWL), unresolved drivers affecting level fluctuations are often not represented by the model governing equations. This work evaluates a novel method to improve the performance of the ADvanced CIRCulation (ADCIRC) hydrodynamic model by assimilating observations from four nadir-only satellite altimetry missions against a set of National Oceanic and Atmospheric Administration (NOAA) gauge stations located across the entire U.S. East Coast. Two different types of simulations were performed – Open Loop (OL) and Data Assimilation (DA). Five different simulations were performed where four different satellite altimetry observations were assimilated individually and combined with two different scenarios – with and without considering the data quality flags. Results indicate that, despite their limited spatial coverage, merging nadir-only observations into ADCIRC from the newly launched Surface Water and Ocean Topography (SWOT)’s nadir altimeter can improve the model performance at 76% of the gauge locations, whereas Sentinel-6 improves 73% of the total locations, Jason-3 74%, and SARAL 21%. Furthermore, combining observations from SWOT-nadir, Jason-3, and Sentinel-6 can improve the ADCIRC performance at more than 80% of the gauge locations for 107-day simulation. Nadir-only satellite altimetry observations can be useful for improving the model performance even if flagged as “poor quality” near the coast. When the flagged data are disregarded, SWOT can improve ADCIRC at 78%, Sentinel-6 at 73%, Jason-3 at 53%, and SARAL at 21% of the gauge locations. The ability to improve the model simulations largely depends on the availability of a satellite overpass nearby. Therefore, model performance can be further enhanced if satellite observations are available during a storm surge event, stressing the importance of frequent satellite overpasses.

Aafnan Bhuiyan, Soelem↗

Relationships between fault characteristics and seismic responses in a large lab-scale tri-axial injection test conducted on a faulted Castlegate Sandstone

Here to investigate mechanisms causing microseismicity (M w < 2) at a CO 2 injection site, a large-scale triaxial block experiment was carried out on a faulted (saw-cut) cubic-meter of Castlegate Sandstone. The experiment consisted of injection tests at varying differential stresses, while monitoring and recording pore pressure and acoustic emissions (AEs). During the experiment, ~33,000 AEs and ~14 mm of horizontal displacement/slip, like a strike-slip fault movement, occurred. To understand the AE responses and ascertain fault characteristics near the located AEs, we modeled the topography of the fault surface, fault aperture, and fault-gouge thickness using pre- and post-experiment laser scans of the fault surface on each half of the block. Additionally, we characterized surface roughness parallel and perpendicular to slip. Models show crushing and flattening of the fault surfaces can be linked to the spatiotemporal distribution of AEs within 50 mm of the fault surface. Approximately 65% of AEs were in areas with small aperture (≤300 μm); thicker fault gouge was observed in adjacent areas with wider aperture and shows a two-fold reduction in grain size relative to unaltered Castlegate Sandstone. This work provides a conceptual understanding on fault surface evolution, which can be applied towards modeling of seismic slip.

58 GEOSCIENCES↗

Increasing the wear resistance of ultra-high molecular weight polyethylene by adding solid lubricating fillers

In order to compare effectiveness of adding solid lubricating fillers for polymeric composites based on ultra-high molecular weight polyethylene (UHMWPE) with graphite, molybdenum disulfide and polytetrafluoroethylene, their tribotechnical characteristics under dry friction, boundary lubrication and abrasive wearing were investigated. The optimal weight fractions of fillers in terms of improving wear resistance have been determined. The supramolecular structure and topography of wear track surfaces of UHMWPE-based composites with different content of fillers have been studied.

36 MATERIALS SCIENCE↗

Stitching methods at the European Synchrotron Radiation Facility (ESRF)

X-ray mirror quality has continuously improved over the past 20 years and manufacturers are now able to provide long mirrors with slope errors below 0.2 μrad. Nevertheless, these mirrors are mounted on holders or even mechanical benders to adjust their curvature and their intrinsic quality must be preserved from any parasitic deformation such as twist. The most direct method of detecting these deformations is to measure the 3D topography of the optical surface. At the ESRF metrology laboratory, three different stitching systems are under development based on Fizeau sub-aperture measurements. The first one consists of measuring long flat mirrors, the second based on the relative angle determinable stitching interferometry (RADSI) method developed at SPring-8 is aimed primarily at the measurement of short mirrors with strong curvature down to a few meters, and the last, also based on the RADSI method, is dedicated to characterize longer mirrors with intermediate curvature. For each method we will describe the measurement setup and discuss first results obtained. Micro-stitching interferometry is also currently used at the ESRF metrology laboratory. The technique is suitable for measuring deeply curved aspherical profiles and will be illustrated with results from a Kirkpatrick-Baez mirror system for nano-focusing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic skyrmion diode: Unidirectional skyrmion motion via symmetry breaking of potential energy barriers

In this work, we realize a magnetic skyrmion diode operated by a unidirectional skyrmion transport that flows in only one direction, which is highly significant for information processing in spintronic and nanoelectronic devices. We easily control the skyrmion transport by engineering asymmetric shapes of geometric structures. Here, we present a simple method to describe the underlying mechanism behind the unidirectional skyrmion transport by characterizing the topography of potential energy surfaces from a purely geometric perspective. Our approach enables a deeper physical insight into skyrmion transport manipulation and efficient design of skyrmion-based devices in geometric structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Statistical perspective on embrittling potency for intergranular fracture

Embrittling potency is a thermodynamic metric that assesses the influence of solute segregation to a grain boundary (GB) on intergranular fracture. Historically, authors of studies have reported embrittling potency as a single scalar value, assuming a single segregation site of importance at a GB and a particular cleavage plane. However, the topography of intergranular fracture surfaces is not generally known a priori. Accordingly, we, in this study, present a statistical ensemble approach to compute embrittling potency, where many free surface (FS) permutations are systematically considered to model fracture of a GB. The result is a statistical description of the thermodynamics of GB embrittlement. As a specific example, embrittling potency distributions are presented for Cr segregation to sites at two Ni $\langle 111 \rangle$ symmetric tilt GBs using atomistic simulations. We show that the average embrittling potency for a particular GB site, considering an ensemble of FS permutations, is not equal to the embrittling potency computed using the lowest energy pair of FSs. A mean GB embrittlement is proposed, considering both the likelihood of formation of a particular FS and the probability of solute occupancy at each GB site, to compare the relative embrittling behavior of two distinct GBs.

36 MATERIALS SCIENCE↗

Development of a mobile toolmark characterization/comparison system [Development of a mobile, automated toolmark characterization/comparison system]

Since the development of the striagraph, various attempts have been made to enhance forensic investigation through the use of measuring and imaging equipment. This study describes the development of a prototype system employing an easy-to-use software interface designed to provide forensic examiners with the ability to measure topography of a toolmarked surface and then conduct various comparisons using a statistical algorithm. Acquisition of the data is carried out using a portable 3D optical profilometer, and comparison of the resulting data files is made using software named “MANTIS” (Mark and Tool Inspection Suite). The system has been tested on laboratory-produced markings that include fully striated marks (e.g., screwdriver markings), quasistriated markings produced by shear-cut pliers, impression marks left by chisels, rifling marks on bullets, and cut marks produced by knives. Using the system, an examiner has the potential to (i) visually compare two toolmarked surfaces in a manner similar to a comparison microscope and (ii) use the quantitative information embedded within the acquired data to obtain an objective statistical comparison of the data files. Finally, this study shows that, based on the results from laboratory samples, the system has great potential for aiding examiners in conducting comparisons of toolmarks.

47 OTHER INSTRUMENTATION↗

Topographic Evolution of Nb Surfaces Subjected to Electropolishing

Surface quality plays an important role in the performance of SRF cavities. We report the topographic evolution of H degassed, N and O doped Nb surfaces subjected to electropolishing using atomic force microscopy. N doped Nb shows a substantial increase in roughness due to formation of niobium nitrides into the surface. Implications of the topography on magnetic field enhancement and vortex entry are discussed.

Lechner, E.M.↗