Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Two-color pyrometry based flame to fuel surface radiative heat flux diagnostic using flamelets

In this study, a non-intrusive two-color pyrometry based radiative heat flux diagnostic is presented that accounts for the self-absorption effects. This diagnostic relies on looking up the flame temperature and soot volume fraction using the ratio of color intensities obtained from digital cameras and numerical solutions of 1D steady-state diffusion flames. Virtual two color pyrometry of computed flame show a unique one-to-one mapping of strained flames with intensity ratio; thereby allowing flames to be indexed and creation of a two-color flamelet manifold (TCFM). The TCFM is a function of two variables; the ratio of red to green intensities (flame index) and physical distance to the stoichiometric surface defined using a level-set function. The developed diagnostic is used in upward flame spread experiments where an approximate flame hull reconstruction method is applied to provide the 3D level-set function and intensity ratio for use of TCFM to provide radiative absorption properties for 3D ray tracing. Accounting for self- absorption effects provide improved soot volume fraction estimates. In conclusion, the radiative heat flux estimates are found to be in very good agreement with literature and improved results are obtained near the flame base.

42 ENGINEERING↗
DOE OSTI2023

Lithium promotion of Pt/m-ZrO 2 catalysts for low temperature water-gas shift

Low temperature water-gas shift (LTS) is an important reaction occurring in a fuel processor for producing and purifying hydrogen. Platinum supported on m-ZrO 2 belongs to a family of catalysts consisting of metal nanoparticles and an active partially reducible oxide, with the catalysis proposed to occur at the boundary between metal particles and the support. In this investigation, increasing the loading of lithium dopant increased the LTS rate up to 0.54 wt % lithium, where conversion was 2.4 times that of the unpromoted catalyst at 260°C. Further increases in lithium loading up to 1.5 wt % decreased the rate, although it remained higher than that of the unpromoted catalyst. Infrared spectroscopy and CO 2 temperature programmed desorption experiments showed three effects with increasing lithium loading: (1) lithium promoter weakened the C–H bond of formate, the proposed rate limiting step of the interfacial surface formate mechanism; (2) high levels of lithium suppressed the platinum site capacity required for hydrogen transfer; and (3) high levels of lithium increased catalyst basicity. Aspects (2) and (3) tended to inhibit desorption of product CO 2 , an acidic molecule the removal of which is metal-catalyzed. XANES and XPS experiments revealed that electron transfer to enrich Pt nanoparticles is unlikely the root cause of C–H bond weakening in formate. However, other electronic effects (e.g., electrostatic effects or molecular rearrangement due to enhanced basicity) were not ruled out.

08 HYDROGEN↗
DOE OSTI2020

Capacitive deionization using carbon derived from an array of zeolitic-imidazolate frameworks

Capacitive deionization (CDI) represents one of the most thermodynamically efficient technologies for brackish water desalination. Its performance is highly reliant on the surface properties of carbon-based electrodes. Zeolitic-imidazolate framework (ZIF)-derived carbon materials have emerged among the most promising candidates owing to their high structural and compositional tuneability. However, the impacts of the precursory ZIF structure on the properties of the final carbon, and therefore, CDI capacity and efficiency remain to be further explored. In this work, four Zn-based ZIFs with different side-chain substitutions on the imidazolates were synthesized on a gram scale with high yields to produce N-doped carbons by pyrolysis. Next, the resulting carbons along with four commercial carbon blacks were characterized physically and electrochemically to explore the structure-performance relationship. We demonstrated that the imidazole side-chain substitution alters the ZIF's decomposition during pyrolysis, influencing the elemental compositions, surface properties, wettability and graphitization levels. The diverse carbon properties result in variable double layer capacitance and charge-transfer resistance, ultimately impacting the CDI performance. Among these carbons, Zn (4abIm)2-C afforded the greatest salt adsorption capacity of 14.19 mg NaCl $·g_C^{–1}$, while Zn (mIm) 2 -C showed the highest overall salt adsorption capacity and rate; both exceeded the performance of the commercial carbon blacks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Calibration and field deployment of low-cost sensor network to monitor underground pipeline leakage

Recent technological advances in methane detection have improved leak detection and repair. However, current methods to reliably measure methane concentrations rely on expensive instruments or demand significant labor input. There is interest in using affordable methane sensors that are responsive to ppmv level changes in methane concentrations in both urban and rural environments for monitoring underground natural gas pipeline leaks. This is especially relevant for situations where potentially significant leaks cannot be repaired immediately or smaller leaks that require long-term monitoring and further evaluation. In this work, a low-cost sensor unit, equipped with a metal oxide sensor, was designed, built, and calibrated over a wide range of methane concentrations and environmental conditions in preparation for field application. A network of these sensors was then installed at the test site and used to measure methane concentrations at ground level above known sub-surface natural gas emissions which emulated underground gas pipeline leaks. This low-cost sensor network measured over 4 days total for the two different known leakage rates. Results demonstrate that the sensors can continuously measure relative methane variability for extended periods but require calibration for a wide range of temperature and humidity conditions to properly determine absolute gas (i.e., methane) concentrations. Furthermore, when a regression analysis was conducted to evaluate the effects of meteorological parameters on methane concentration, air temperature and wind speed have strong impacts on the concentration. Overall, the network approach allows improved identification of leak location and monitoring of underground natural gas leaks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploration of the parameter space of quasisymmetric stellarator vacuum fields through adjoint optimisation

Optimising stellarators for quasisymmetry leads to strongly reduced collisional transport and energetic particle losses compared with unoptimised configurations. Although stellarators with precise quasisymmetry have been obtained in the past, it remains unclear how broad the parameter space is where good quasisymmetry may be achieved. We study the range of aspect ratios and rotational transform values for which stellarators with excellent quasisymmetry on the boundary can be obtained. A large number of Fourier harmonics is included in the boundary representation, which is made computationally tractable by the use of adjoint methods to enable fast gradient-based optimisation and by the direct optimisation of vacuum magnetic fields, which converge more robustly compared with solutions from magnetohydrostatics. Several novel configurations are presented, including stellarators with record levels of quasisymmetry on a surface, three field period quasiaxisymmetric stellarators with substantial magnetic shear, and compact quasisymmetric stellarators at low aspect ratios similar to tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Ion Pairing Mediates Molecular Organization Across Liquid/Liquid Interfaces

Liquid/liquid interfaces play a central role in scientific fields ranging from nanomaterial synthesis and soft matter electronics to nuclear waste remediation and chemical separations. This diversity of functions arises from an interface’s ability to respond to changing conditions in its neighboring bulk phases. Understanding what drives this interfacial flexibility can provide novel avenues for designing new functional interfaces. However, limiting this progress is an inadequate understanding of the subtle intermolecular and interphase interactions taking place at the molecular level. Here, we use surface-specific vibrational sum frequency generation spectroscopy combined with atomistic molecular dynamics simulations to investigate the self-assembly and structure of model ionic oligomers consisting of an oligodimethylsiloxane (ODMS) tail covalently attached to a positively charged methyl imidazolium (MIM + ) head group at buried oil/aqueous interfaces. We show how the presence of seemingly innocuous salts can impart dramatic changes to the ODMS tail conformations in the oil phase via specific ion effects and ion-pairing interactions taking place in the aqueous phase. These specific ion interactions are shown to drive enhanced amphiphile adsorption, induce morphological changes, and disrupt emergent hydrogen-bonding structures at the interface. Tuning these interactions allows for independent control over the oligomer structure in the oil phase versus interfacial population changes and represents key mechanistic insight that is needed to control chemical reactions at liquid/liquid interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Control of Photoswitching Kinetics with Strong Light–Matter Coupling in a Cavity

Most photochemistry occurs in the regime of weak light–matter coupling, in which a molecule absorbs a photon and then performs photochemistry from its excited state. In the strong coupling regime, enhanced light–matter interactions between an optical field and multiple molecules lead to collective hybrid light–matter states called polaritons. This strong coupling leads to fundamental changes in the nature of the excited states including multi-molecule delocalized excitations, modified potential energy surfaces, and dramatically altered energy levels relative to non-coupled molecules. Here, the effect of strong light–matter coupling on covalent photochemistry has not been well explored. Photoswitches undergo reversible intramolecular photoreactions that can be readily monitored spectroscopically. In this work, we study the effect of strong light–matter coupling on the kinetics of photoswitching within optical cavities. Reproducing prior experiments, photoswitching of spiropyran/merocyanine photoswitches is decelerated in a cavity. Fulgide photoswitches, however, show the opposite effect, with strong coupling accelerating photoswitching. While modified merocyanine switching can be explained by changes in radiative decay rates or the amount of light in the cavity, modified fulgide switching kinetics suggest direct changes to excited-state reaction kinetics.

Cavities↗
DOE OSTI2020

Impacts of Latent Energy and Snow Fall Speed on a Wintertime Midlatitude Cyclone

This study aimed to understand the impacts of latent energy as well as snow fall speeds on precipitation properties and synoptic-scale storm characteristics of a wintertime midlatitude cyclone. Simulations of a potent winter storm that impacted the Rocky Mountains and northern Great Plains of the United States in February 2017 were performed using the Weather Research and Forecasting model with latent heating or cooling from individual microphysical processes systematically turned off and fall speeds adjusted by ±50%. Results indicated substantial impacts on the microphysical characteristics of the simulated storm to fall speed, cooling from sublimation, and warming from deposition. The impacts of cooling and warming were manifested as differences in accumulated snowfall. Increased (decreased) fall speeds led to smaller (larger) ice crystals and total mass, resulting in offsetting effects on the precipitation flux, and thus minimal impacts on snowfall and large-scale characteristics of the storm. Warming and cooling associated with deposition and sublimation, respectively, impacted the synoptic-scale dynamics, whereby removing warming from deposition resulted in an increased meridional temperature gradient near the jet stream, thus increasing the jet strength and causing it to be more westerly with less curvature aloft. This in turn limited upper-level divergence, creating a weaker surface low and shifting the precipitation shield southward. The opposite occurred with the removal of latent cooling due to sublimation. This study highlights the potential importance of latent energy associated with ice sublimation and deposition and fall speeds in the larger-scale characteristics of winter storms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanisms of tropical Pacific decadal variability

Naturally occurring tropical Pacific variations at timescales of 7–70 years — tropical Pacific decadal variability (TPDV) — describe basin-scale sea surface temperature (SST), sea-level pressure and heat content anomalies. Several mechanisms are proposed to explain TPDV, which can originate through oceanic processes, atmospheric processes or as an El Niño/Southern Oscillation (ENSO) residual. In this Review, we synthesize knowledge of these mechanisms, their characteristics and contribution to TPDV. Oceanic processes include off-equatorial Rossby waves, which mediate oceanic adjustment and contribute to variations in equatorial thermocline depth and SST; variations in the strength of the shallow upper-ocean overturning circulation, which exhibit a large anti-correlation with equatorial Pacific SST at interannual and decadal timescales; and the propagation of salinity-compensated temperature (spiciness) anomalies from the subtropics to the equatorial thermocline. Atmospheric processes include midlatitude internal variability leading to tropical and subtropical wind anomalies, which result in equatorial SST anomalies and feedbacks that enhance persistence; and atmospheric teleconnections from Atlantic and Indian Ocean SST variability, which induce winds conducive to decadal anomalies of the opposite sign in the Pacific. Although uncertain, the tropical adjustment through Rossby wave activity is likely a dominant mechanism. Finally, a deeper understanding of the origin and spectral characteristics of TPDV-related winds is a key priority.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Measurement of electrical characteristics of Ge-based diodes with thermal GeO2 films exposed to controlled humidity conditions

We investigated the impact of the interaction between gas-phase water molecules and thermally oxidized GeO2 on Ge on the performance of metal–oxide–semiconductor (MOS) structures. A vacuum-integrated setup was developed to form MOS diodes with a GeO2/Ge structure that had been exposed to controlled humidity conditions and to subsequently measure their electrical characteristics in situ. The capacitance–voltage (C–V) curves exhibited a significant negative shift, indicating the generation of positive charges at the GeO2/Ge interface when the GeO2 surface was exposed to humidity levels above approximately 1%. According to a previous study using electron spectroscopy, this threshold corresponds to the humidity level at which molecular water begins to grow on a GeO2/Ge structure. It is likely that gas-phase water molecules infiltrating the GeO2 film bind to local OH sites via hydrogen bonding, leading to the formation of positive fixed charges at the GeO2/Ge interface.

Sano, Shuto↗
DOE OSTI2020

Magnetotransport properties of the topological nodal-line semimetal CaCdSn

Topological nodal-line semimetals support protected band crossings, which form nodal lines or nodal loops between the valence and conduction bands and exhibit novel transport phenomena. Here we address the topological state of the nodal-line semimetal candidate material CaCdSn, and report magnetotransport properties of its single crystals grown by the self-flux method. In this work, our first-principles calculations show that the electronic structure of CaCdSn harbors a single nodal loop around the Γ point in the absence of spin-orbit coupling effects. The nodal crossings in CaCdSn are found to lie above the Fermi level and yield a Fermi surface that consists of both electron and hole pockets. CaCdSn exhibits high mobility (μ ≈ 3.44 × 10 4 cm 2 V –1 s –1 ) and displays a field-induced metal-semiconductor-like crossover with a plateau in resistivity at low temperature. We observe an extremely large and quasilinear nonsaturating transverse as well as longitudinal magnetoresistance (MR) at low temperatures (≈ 7.44 × 10 3 % and ≈ 1.71 × 10 3 %, respectively, at 4 K). We also briefly discuss possible reasons behind such a large quasilinear magnetoresistance and its connection with the nontrivial band structure of CaCdSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A Novel Active Optimization Approach for Rapid and Efficient Design Space Exploration Using Ensemble Machine Learning

In this work, a novel design optimization technique based on active learning, which involves dynamic exploration and exploitation of the design space of interest using an ensemble of machine learning algorithms, is presented. In this approach, a hybrid methodology incorporating an explorative weak learner (regularized basis function model) that fits high-level information about the response surface and an exploitative strong learner (based on committee machine) that fits finer details around promising regions identified by the weak learner is employed. For each design iteration, an aristocratic approach is used to select a set of nominees, where points that meet a threshold merit value as predicted by the weak learner are selected for evaluation. In addition to these points, the global optimum as predicted by the strong learner is also evaluated to enable rapid convergence to the actual global optimum once the most promising region has been identified by the optimizer. Additionally, this methodology is first tested by applying it to the optimization of a two-dimensional multi-modal surface and, subsequently, to a complex internal combustion (IC) engine combustion optimization case with nine control parameters related to fuel injection, initial thermodynamic conditions, and in-cylinder flow. It is found that the new approach significantly lowers the number of function evaluations that are needed to reach the optimum design configuration (by up to 80%) when compared to conventional optimization techniques, such as particle swarm and genetic algorithm-based optimization techniques.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

A novel active optimization approach for rapid and efficient design space exploration using ensemble machine learning

In this work, a novel design optimization technique based on active learning, which involves dynamic exploration and exploitation of the design space of interest using an ensemble of machine learning algorithms, is presented. In this approach, a hybrid methodology incorporating an explorative weak learner (regularized basis function model) which fits high-level information about the response surface, and an exploitative strong learner (based on committee machine) that fits finer details around promising regions identified by the weak learner, is employed. For each design iteration, an aristocratic approach is used to select a set of nominees, where points that meet a threshold merit value as predicted by the weak learner are selected to be evaluated using expensive function evaluation. In addition to these points, the global optimum as predicted by the strong learner is also evaluated to enable rapid convergence to the actual global optimum once the most promising region has been identified by the optimizer. This methodology is first tested by applying it to the optimization of a two-dimensional multi-modal surface. The performance of the new active learning approach is compared with traditional global optimization methods, namely micro-genetic algorithm (pGA) and particle swarm optimization (PSO). It is demonstrated that the new optimizer is able to reach the global optimum much faster with a significantly fewer number of function evaluations. Subsequently, the new optimizer is also applied to a complex internal combustion (IC) engine combustion optimization case with nine control parameters related to fuel injection, initial thermodynamic conditions, and in-cylinder flow. It is again found that the new approach significantly lowers the number of function evaluations that are needed to reach the optimum design configuration (by up to 80%) when compared to particle swarm and genetic algorithm-based optimization techniques.

Machine learning, active learning, design optimiza↗
DOE OSTI2021

Status Update for the Canister Deposition Field Demonstration

This report updates the high-level test plan for evaluating surface deposition on three commercial 32PTH2 spent nuclear fuel (SNF) canisters inside NUTECH Horizontal Modular Storage (NUHOMS) Advanced Horizontal Storage Modules (AHSM) from Orano (formerly Transnuclear Inc.) and provides a description of the surface characterization activities that have been conducted to date. The details contained in this report represent the best designs and approaches explored for testing as of this publication. Given the rapidly developing nature of this test program, some of these plans may change to accommodate new objectives or requirements. The goal of the testing is to collect highly defensible and detailed surface deposition measurements from the surface of dry storage canisters in a marine coastal environment to guide chloride-induced stress corrosion crack (CISCC) research. To facilitate surface sampling, the otherwise highly prototypic dry storage systems will not contain SNF but rather will be electrically heated to mimic the thermal-hydraulic-environment. Instrumentation throughout the canister, storage module, and environment will provide an extensive amount of information for the use of model validation. Manual sampling over a comprehensive portion of the canister surface at regular time intervals will offer a high-fidelity quantification of the conditions experienced in a harsh yet realistic environment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Status Update for the Canister Deposition Field Demonstration

This report updates the high-level test plan for evaluating surface deposition on three commercial 32PTH2 spent nuclear fuel (SNF) canisters inside NUTECH Horizontal Modular Storage (NUHOMS) Advanced Horizontal Storage Modules (AHSMs) from Orano (formerly Transnuclear Inc.) and provides a description of the surface characterization activities that have been conducted to date. The details contained in this report represent the best designs and approaches explored for testing as of this publication. Given the rapidly developing nature of this test program, some of these plans may change to accommodate new objectives or requirements. The goal of the testing is to collect highly defensible and detailed dust deposition measurements from the surface of dry storage canisters in a marine coastal environment to guide chloride-induced stress corrosion crack (CISCC) research. To facilitate surface sampling, the otherwise highly prototypic dry storage systems will not contain SNF but rather will be electrically heated to mimic the decay heat and thermal hydraulic environment. Test and heater design is supported by detailed computational fluid dynamics modeling. Instrumentation throughout the canister, storage module, and environment will provide extensive information about thermal-hydraulic behavior. Manual sampling over a comprehensive portion of the canister surface at regular time intervals will offer a high-fidelity quantification of the conditions experienced in a harsh yet realistic environment. Functional testing of the finalized heater assemblies and test apparatus is set to begin in December 2022. The proposed delivery of the canisters to the host test site is June/July 2023, which is well ahead of when the AHSM installations would be completed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Predeployment progress of the Canister Deposition Field Demonstration

This report updates the high-level test plan for evaluating surface deposition on three commercial 32PTH2 spent nuclear fuel (SNF) canisters inside NUTECH Horizontal Modular Storage (NUHOMS) Advanced Horizontal Storage Modules (AHSMs) from Orano (formerly Transnuclear Inc.) and provides a summary of the surface sampling activities that have been conducted to date. The details contained in this report represent the best designs and approaches explored for testing as of this publication. Given the rapidly developing nature of this test program, some of these plans may change to accommodate new objectives or requirements. One goal of this testing is to collect defensible and detailed dust deposition measurements from the surface of dry storage canisters in a marine coastal environment to guide chloride-induced stress corrosion cracking (CISCC) research. Another goal is to provide data for the validation of computational fluid dynamics (CFD) based deposition modeling. To facilitate surface sampling, the otherwise highly prototypic dry storage systems will not contain SNF but rather will be electrically heated to mimic the decay heat and thermal hydraulic environment. Test and heater design is supported by detailed CFD modeling. Instrumentation throughout the canister, storage module, and environment will provide extensive information about the thermal-hydraulic behavior of horizontal dry cask storage systems. Manual sampling over a comprehensive portion of the canister surface at regular time intervals will offer detailed quantification and composition of the deposited particulates from a realistic storage environment. Discussions of a potential host site for the Canister Deposition Field Demonstration (CDFD) are ongoing. Until a host site is chosen, testing of key CDFD hardware components including the heater assemblies, power skid, and remote data acquisition system will continue. Functional testing of the finalized heater assemblies and test apparatus started this fiscal year. These initial heater tests have shown the assemblies are performing within design specifications. Staged surface sampling of a mockup of a canister outside the AHSM on a transfer skid was also performed. Refinements to the sampling procedures and techniques were captured from observation of these activities and lessons-learned debriefs. These updated sampling procedures and techniques are planned to be tested again in the field using the mockup in order to assure personnel are using the most accurate and repeatable methods possible prior to deployment for actual CDFD testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Evaluation of the Four-Dimensional Ensemble-Variational Hybrid Data Assimilation with Self-Consistent Regional Background Error Covariance for Improved Hurricane Intensity Forecasts

The feasibility of a hurricane initialization framework based on the Gridpoint Statistical Interpolation (GSI)-based four-dimensional ensemble-variational (GSI-4DEnVar) hybrid data assimilation system for the Hurricane Weather Research and Forecasting model (HWRF) model is evaluated in this study. The system considers the temporal evolution of error covariances via the use of four-dimensional ensemble perturbations that are provided by high-resolution, self-consistent HWRF ensemble forecasts. It is different from the configuration of the GSI-based three-dimensional ensemble-variational (GSI-3DEnVar) hybrid data assimilation system, similar to that used in the operational HWRF, which employs background error covariances provided by coarser-resolution global ensembles from the National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) ensemble Kalman filtering data assimilation system. In addition, our proposed initialization framework discards the empirical intensity correction in the vortex initialization package that is employed by the GSI-3DEnVar initialization framework in operational HWRF. Data assimilation and numerical simulation experiments for Hurricanes Joaquin (2015), Patricia (2015), and Matthew (2016) are conducted during their intensity changes. The impacts of two initialization frameworks on the HWRF analyses and forecasts are compared. It is found that GSI-4DEnVar leads to a reduction in track, minimum sea level pressure (MSLP), and maximum surface wind (MSW) forecast errors in all of the HWRF simulations, compared with the GSI-3DEnVar initialization framework. With assimilating high-resolution observations within the hurricane inner-core region, GSI-4DEnVar can produce the initial hurricane intensity reasonably well without the empirical vortex intensity correction. Further diagnoses with Hurricane Joaquin indicate that GSI-4DEnVar can significantly alleviate the imbalances in the initial conditions and enhance the performance of the data assimilation and subsequent hurricane intensity and precipitation forecasts

54 ENVIRONMENTAL SCIENCES↗