Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superconductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low fractional volume superconductivity in single crystals of Pr{sub 4}Ni{sub 3}O{sub 10} under pressure

Magnetotransport measurements of P⁢r4⁢N⁢i3⁢O10 single crystals performed under externally applied pressures up to 73 GPa in diamond anvil cells with either KBr or Nujol oil as pressure media yield signatures of superconductivity with a maximum onset temperature of approximately 31 K. True zero resistance was not observed, consistent with a nonpercolating superconducting volume fraction. Magnetization measurements provided corroborating evidence of superconductivity, with a pressure-dependent diamagnetic signal occurring below the onset temperature, and an estimate from the absolute value of the susceptibility suggests a superconducting volume fraction on the order of 10%. We observe sample to sample variations in the magnitude and pressure dependence of 𝑇𝑐 as well as a dependence on the configuration of electrical contacts on a given sample. Possible causes of this behavior may be significant inhomogeneities in the pressure and/or damage to the samples induced by the pressure media as well as inhomogeneities in the crystals themselves. The results imply that our as-grown P⁢r4⁢N⁢i3⁢O10 single crystals are not bulk superconductors but that there is a minority structure present within the crystals that is indeed superconductin

Chen, Xinglong↗
DOE OSTI2023

Superconductivity of Ta-Hf and Ta-Zr alloys: Potential alloys for use in superconducting devices

The electronic properties relevant to superconductivity are reported for bulk Ta-Hf and Ta-Zr body centered cubic alloys, in a large part to determine whether their properties are suitable for potential use in superconducting qbits. The body centered cubic unit cell sizes increase with increasing alloying. Here, the results of magnetic susceptibility, electrical resistivity, and heat capacity characterization are reported. While elemental Ta is a type I superconductor, the alloys are type II strong coupling superconductors. Although decreasing the electron count per atom is expected to increase the density of electronic states at the Fermi level and thus the superconducting transition temperature (T c ) in these systems, we find that this is not sufficient to explain the significant increases in the superconducting T c 's observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structure and equation of state of Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ from x-ray diffraction to megabar pressures

Pressure is a unique tuning parameter for probing the properties of materials, and it has been particularly useful for studies of electronic materials such as high-temperature cuprate superconductors. In this work we report the effects of quasihydrostatic compression produced by a neon pressure medium on the structures of bismuth-based high-T c cuprate superconductors with the nominal composition Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ (n=1, 2, 3) up to 155 GPa. The structures of all three compositions obtained by synchrotron x-ray diffraction can be described as pseudotetragonal over the entire pressure range studied. We show that previously reported pressure-induced distortions and structural changes arise from the large strains that can be induced in these layered materials by nonhydrostatic stresses. The pressure-volume equations of state (EOS) measured under these quasihydrostatic conditions cannot be fit to single phenomenological formulation over the pressure ranges studied, starting below 20 GPa. This intrinsic anomalous compression as well as the sensitivity of Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ to deviatoric stresses provide explanations for the numerous inconsistencies in reported EOS parameters for these materials. We conclude that the anomalous compressional behavior of all three compositions is a manifestation of the changes in electronic properties that are also responsible for the remarkable nonmonotonic dependence of T c with pressure, including the increase in T c at the highest pressures studied so far for each. Transport and spectroscopic measurements up to megabar pressures are needed to fully characterize these cuprates and explore higher possible critical temperatures in these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cyclic superconducting refrigerators using guided fluxon propagation

We propose cyclic refrigeration in solid state, employing a gas of magnetic field vortices in a type-II superconductor—also known as fluxons—as the cooling agent. Refrigeration cycles are realized by envisioning a racetrack geometry consisting of both adiabatic and isothermal arms, etched into a type-II superconductor. The guided propagation of fluxons in the racetrack is achieved by applying an external electrical current, in a Corbino geometry, through the sample. A gradient of magnetic field is set across the racetrack allowing one to adiabatically cool down and heat up the fluxons, which subsequently exchange heat with the cold and hot reservoirs, respectively. We characterize the steady state of refrigeration cycles thermodynamically for both s -wave and d -wave pairing symmetries, and present their figures of merit such as the cooling power delivered, and the coefficient of performance. Our cooling principle can offer significant cooling for on-chip microrefrigeration purposes, by locally cooling below the base temperatures achievable in a conventional dilution refrigerator. We estimate n W / m m 2 of cooling power per unit area assuming a tunnel coupling with ∼ M Ω µ m 2 specific resistance. Integrating the fluxon fridge to quantum circuits can enhance their coherence time by locally suppressing thermal fluctuations, and improve the efficiency of single photon detectors and charge sensors. Published by the American Physical Society 2024

Karmakar, Tathagata (ORCID:0000000187812017)↗
DOE OSTI2024

Stabilization of U 5 f 2 configuration in UTe 2 through U 6 d dimers in the presence of Te2 chains

We investigate the topological superconductor candidate UTe 2 using high-resolution valence-band resonant inelastic x-ray scattering at the U M 4 , 5 edges. We observe atomiclike low-energy excitations that support the correlated nature of this unconventional superconductor. These excitations originate from the U 5 f 2 configuration, which is unexpected since the short Te2-Te2 distances exclude Te2 being 2 − . By utilizing the photoionization cross-section dependence of the photoemission spectra in combination with band structure calculations, we infer that the stabilization of the U 5 f 2 configuration is due to the U 6 d bonding states in the U dimers acting as a charge reservoir. Our results emphasize that the description of the physical properties should commence with a 5 f 2 ansatz. Published by the American Physical Society 2024

Christovam, Denise S. (ORCID:0000000250698107)↗
DOE OSTI2025

Anisotropic field-induced changes in the superconducting order parameter of UTe 2

UTe 2 is a newly discovered unconventional superconductor, where electron Cooper pairs combine into a spin-triplet ground state. We study the specific heat C( H,T ) of a high-quality UTe 2 single crystal, with a single anomaly at a high superconducting transition temperature T c = 2.1 K and a low residual Sommerfeld coefficient γ 0 . Applying magnetic fields up to 12 T along the crystallographic axes a, b , and c , we observe highly anisotropic behavior in γ 0 ( H ). Below 4 T, γ 0 ( H ) ≈ γ 0 + λi √H (i = a, b, c) , which is expected for an unconventional superconductor with nodes on the Fermi surface away from the direction of the magnetic field. At 4 T ( a and b axes) and 5.5 T ( c axis), distinctive changes in the behavior of γ 0 (H) suggest that a stable low-field ground state begins to evolve above 4 T. The data analysis indicates that the nodes are located near the a–b plane, with possible order parameters d B2u + iεd B1u or d B2u + iεd Au . Our findings support B 2u as the primary superconducting order parameter in UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Possible unconventional surface superconductivity in the half-Heusler compound YPtBi

Here, we report an extensive study of the noncentrosymmetric half-Heusler superconductor YPtBi, revealing an unusual relation between bulk superconductivity and the possible appearance of surface superconductivity on the (111) oriented surface, at temperatures up to three times the bulk transition temperature. Transport measurements confirmed the low carrier density of the material and its bulk superconducting transition, which was also observed in ac susceptibility through mutual inductance (MI) measurements. However, a weak signature of superconductivity in the MI measurements appeared much above the bulk transition temperature, which was further observed in scanning tunneling spectroscopy, pointing to a possible surface superconducting state. Polar Kerr effect measurements suggest that while the bulk superconductor may exhibit an unusual nodal superconducting state, only the surface state breaks time reversal symmetry. Complementary tunneling measurements on LuPtBi are used to establish the observations on YPtBi, while density-functional theory calculations may shed light on the origin of this unusual surface state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Lattice-Charge Coupling in a Trilayer Nickelate with Intertwined Density Wave Order

Intertwined charge and spin correlations are ubiquitous in a wide range of transition metal oxides and are often perceived as intimately related to unconventional superconductivity. Theoretically envisioned as driven by strong electronic correlations, the intertwined order is usually found to be strongly coupled to the lattice as signaled by pronounced phonon softening. Recently, both charge and spin density waves (CDW and SDW) and superconductivity have been discovered in several Ruddlesden-Popper (RP) nickelates, in particular trilayer nickelates 𝑅⁢𝐸 4⁢ Ni 3 ⁢O 10 (𝑅⁢𝐸 = Pr, La). The nature of the intertwined order and the role of lattice-charge coupling are at the heart of the debate about these materials. Using inelastic x-ray scattering, we mapped the low-energy phonon dispersions in 𝑅⁢𝐸 4⁢ Ni 3 ⁢O 10 and found no evidence of softening near the CDW wave vector over a wide temperature range, which contrasts with the pronounced anomalies frequently observed in cuprate superconductors. Calculations of the electronic susceptibility revealed a peak at the observed SDW ordering vector but not at the CDW wave vector. Our experimental and theoretical findings highlight the crucial role of the spin degree of freedom and establish a foundation for understanding the interplay between superconductivity and density-wave transitions in RP nickelate superconductors and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Accurate Electron-Phonon Interactions from Advanced Density Functional Theory

Electron-phonon coupling (EPC) is key to understanding charge transport, band renormalization, and superconductivity in energy materials, including correlated transition-metal oxides, ferroelectric perovskites, optoelectronic semiconductors, and phonon-mediated superconductors. Although first-principles density functional theory (DFT)-based EPC calculations are used widely, their predictive power is limited by the accuracy, transferability, and efficiency of the underlying exchange-correlation functionals. These limitations become exacerbated in complex 𝑑- and 𝑓-electron materials, where beyond-DFT approaches and additional corrections, such as the Hubbard 𝑈, are commonly invoked. Here, using the examples of Co⁢O and Ni⁢O, we show how the 𝑟 2 SCAN density functional correctly captures strong EPC effects in transition-metal oxides without requiring the introduction of Hubbard 𝑈 parameters. We also find that 𝑟 2 SCAN successfully describes the subtle interplay between ionic and covalent bonding, and strong EPC effects in the low-temperature rhombohedral phase of the prototypical ferroelectric Ba⁢Ti⁢O 3 , without requiring Hubbard 𝑈 and intersite 𝑉 corrections. We further demonstrate the ability of 𝑟 2 SCAN to accurately model the EPC of the main-group semiconductor Ga⁢As and the phonon-mediated superconducting properties of Mg⁢B 2 , with reliable electronic bands and phonons. Our study establishes 𝑟 2 SCAN-based EPC as a transferable, parameter-free, and computationally efficient framework for predictive material-specific modeling of EPC in energy materials, and opens a practical route toward high-throughput screening of superconductors, thermoelectrics, optoelectronic semiconductors, and oxide electrodes and catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Hund's coupling governed orbital-selective superconductivity in Ba 1−𝑥 ⁢K 𝑥⁢ Fe 2 ⁢As 2

Understanding how strong electronic correlations shape superconductivity remains a central challenge in quantum materials. In multiorbital systems, correlations driven by Hund's coupling can differentiate the behavior of individual orbitals, producing the so-called Hund's metal state. How such orbital-selectivity also governs superconducting pairing, however, has remained largely unexplored experimentally. Here, in this study, we use high-resolution angle-resolved photoemission spectroscopy to systematically map the superconducting gap structure across the phase diagram of the representative iron-based superconductor Ba 1−x K x Fe 2 As 2 . We find that superconductivity evolves in a strongly orbital-dependent manner: the gap associated with the d xy orbital collapses beyond optimal doping while pairing on the d xz /d yz orbitals persists. This behavior mirrors the orbital-selective correlations observed in the normal state and reveals a direct connection between Hund's metal physics and the superconducting pairing landscape. Our results demonstrate that superconducting gaps themselves can serve as a sensitive probe of orbital-dependent correlations and suggest that Hund's coupling plays a central role in shaping pairing in multiorbital superconductors.

Corbae, Elena [SLAC National Accelerator Laborator↗
DOE OSTI2020

SuperCIC: Enhanced Winding Current Density for Hybrid Windings of Tokamaks

The design is presented for a new approach to cable-in-conduit (SuperCIC) for use in the high-field windings of tokamaks. Two layers of high-field superconductor wires are cabled onto a thin-wall perforated center tube. An overwrap is applied and the cable is inserted as a loose fit into a sheath tube. The sheath tube is drawn down onto the cable to compress the wires onto the center tube and immobilize them. The SuperCIC is then co-wound with a high-strength armor extrusion, which is kerf-cut so that the co-winding onto a coil mandrel can be made without deformation within the armor or the CIC. SuperCIC facilitates hybrid windings, in which subwindings of NbTi are used where B < 7 T, Nb 3 Sn where B < 14 T, and Bi-2212where B > 14 T to minimize superconductor cost. Demount-able splices are used to interconnect layers. A conceptual design has been prepared for a tokamak with aspect ratio A ~ 2.0, magnetic field of 17.4Tat the inner windings and 6.7 T at the plasma,and winding current density ~140 A/mm 2 -sufficient for optimizing the fusion power density in a compact spherical tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Characterization of Amplification Properties of the Superconducting-Ferromagnetic Transistor

Here we report on the measurement results of the superconducting-ferromagnetic transistors (SFTs). The devices were made at Northwestern University and Hypres (SeeQC), Inc. (Nevirkovets et al., 2014; 2015). SFT is a multiterminal device with the SIS'FIFS (or SFIFS'IS) structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material, respectively) exploiting intense quasiparticle injection in order to modify the nonlinear I-V curve of a superconducting tunnel junction. SFT is capable of providing voltage, current, and power amplification while having good input/output isolation. We characterized the devices using different measurement techniques. We measured S parameters of the single- and double-acceptor devices at frequencies up to 5 MHz. Importantly, we confirmed that the isolation between the input and output of the device is quite good. However, the techniques typically employed to characterize semiconductor devices do not allow for revealing the full potential of our low-resistive SFT devices, especially those having two acceptors. In the latter case, we also tested the devices using the battery-powered current sources with floating grounds. Analyzing double-acceptor I-V curves recorded at different levels of injection currents, for an optimal load, we deduced a small-signal voltage gain of 33 and a power gain of 2.4. We suggest that further improvement of the SFT device parameters is possible in optimized devices, so that the device potentially may serve as a preamplifier for readout of output signals of cryogenic detectors and be useful as an element of other superconductor-based circuits. In addition, we used scanning transmission electron microscopy to identify some problems in the fabrication of the devices without any planarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Conceptual Design of High Field Central Solenoid for Fusion Nuclear Science Facility

Fusion Nuclear Science Facility (FNSF) is a critical fusion nuclear step in the US beyond ITER before proceeding to a larger and electricity producing fusion power plant. Although FNSF is a steady state machine to be operated at high duty cycle, a high field and high current density central solenoid magnet is needed for plasma startups. Due to space constraints in the FNSF in-board radial build, the magnetic field and coil current density required exceed conventional low temperature superconductor (LTS) performance limits and the design can only be achieved by high temperature superconductors (HTS). The design for the central solenoid, also called the ohmic heating (OH) magnet for FNSF shall meet the 100 Weber double flux swing requirement for plasma startups. Finally, the stresses at such a high field and high current density coil may require a bucked and wedged TF-OH design to accommodate space for coil winding support structures in in-board system radial build for high field FNSF operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Conceptual Design of a 20 T Hybrid Cos-Theta Dipole Superconducting Magnet for Future High-Energy Particle Accelerators

High energy physics research will need more and more powerful circular accelerators in the next decades. It is therefore desirable to have dipole magnets able to produce the largest possible magnetic field, in order to keep the machine diameter within a reasonable size. A 20 T dipole is considered a desired achievement since it would allow the construction of an 80 km machine, able to circulate 100 TeV proton beams. In order to reach 20 T, a hybrid Low-Temperature Superconductor (LTS) - High-Temperature Superconductor (HTS) magnet is needed, since LTS technology is presently limited to ~16 T for accelerator magnet applications. In this paper, we present the design of a 6 layers 20 T hybrid dipole magnet using Nb 3 Sn (LTS) and Bi2212 (HTS). Here we show that it is possible to achieve this magnetic field with accelerator field quality, with sufficient margin on a realistic conductor, keeping the stresses within safe limit, avoiding conductor degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Conceptual Structural Design and Analysis of a 20 T Hybrid Cos Dipole for Future Particle Colliders

Here, to reach high collision energy for future high-energy particle colliders, like the Future Circular Collider (FCC) or the Muon Collider, it is required to achieve high field strength of the bending dipoles. Currently, the practical limit for Nb$_{\text{3}}$ Sn technology is around 16 T and, in order to further increase the magnetic field, the superconducting magnet community is considering High Temperature Superconductors (HTS), in particular Bi-2212 and REBCO conductors. However, their relevant higher cost has led the community to consider a hybrid approach where HTS materials are used in the high field region of the coils with so-called insert coils, and Low Temperature Superconductors are involved in the lower field part ($< $ 16 T) with so-called outsert coils. This paper describes the conceptual mechanical design of a 20 T hybrid cos$\theta$ dipole configuration. The high stress levels that the structure is facing due to the high magnetic field are discussed. Moreover, it presents the results of the optimization analysis of the shell-based support structure based on the key-and-bladder technology that provides the azimuthal pre-stress during room temperature assembly and cooldown to cryogenic temperatures. The aim of this work is to present a feasible design that satisfies the stress requirements.

D'Addazio, Marika [Politecnico di Torino (Italy); ↗
DOE OSTI2020

Conceptual Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment

An important step toward the advent of nuclear fusion as a future power source is the development of plasmafacing materials that can function as designed for a long period of time. While ITER and other devices including Wendelstein 7-X and the Joint European Torus will provide insight into divertor and first wall performance, a dedicated device to advance the understanding of material performance in the representative plasma environments is needed. The Material Plasma Exposure eXperiment has been proposed as a linear plasma device to generate and to direct fusion reactor-like plasma energy and particle flux at the target materials with electron temperatures of 1-15 eV and electron densities of 10 20 -10 21 m -3 . Given that the requirements for radio frequency (RF) heating on-axis field are no greater than 2.5 T and the warm bore diameters must be between 60 cm and 1.5 m, the conceptual design was developed for the experiments on a set of superconducting magnets carried out using commercially available NbTi superconductors. This conceptual design evaluated the cryogenic heat loads, mechanical loads, and quench protection to ensure that the current design is compatible with current technologies. In addition, an alternative evaluation of this design relative to ReBCO high-temperature superconducting magnets determined the conditions under which these technologies could be advantageous.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electronic structure and correlations in planar trilayer nickelate Pr 4 Ni 3 O 8

The discovery of superconductivity in planar nickelates raises the question of how the electronic structure and correlations of Ni 1+ compounds compare to those of the Cu 2+ cuprate superconductors. Here, we present an angle-resolved photoemission spectroscopy (ARPES) study of the trilayer nickelate Pr 4 Ni 3 O 8 , revealing a Fermi surface resembling that of the hole-doped cuprates but with critical differences. Specifically, the main portions of the Fermi surface are extremely similar to that of the bilayer cuprates, with an additional piece that can accommodate additional hole doping. We find that the electronic correlations are about twice as strong in the nickelates and are almost k-independent, indicating that they originate from a local effect, likely the Mott interaction, whereas cuprate interactions are somewhat less local. Nevertheless, the nickelates still demonstrate the strange-metal behavior in the electron scattering rates. Understanding the similarities and differences between these two families of strongly correlated superconductors is an important challenge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Field-induced transition within the superconducting state of CeRh 2 As 2

Not your usual superconductor Most superconductors have only one superconducting phase. Khim et al . measured the magnetic susceptibility of the heavy fermion material CeRh 2 As 2 to reveal the presence of two distinct superconducting phases, one of which emerges from the other when an external magnetic field is applied (see the Perspective by Pourret and Knebel). The researchers ascribe the unusual properties of CeRh 2 As 2 to its crystal structure, which is globally centrosymmetric but consists of noncentrosymmetric layers. —JS

Science & Technology - Other Topics↗