Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Dissociation of relativistic {sup 10}B nuclei in nuclear track emulsion

The structural features of {sup 10}B are studied by analyzing the dissociation of nuclei of this isotope at an energy of 1 A GeV in nuclear track emulsion. The fraction of the {sup 10}B → 2He + H channel in the charge state distribution of fragments is 78%. It was determined based on the measurements of fragment emission angles that unstable {sup 8}Be{sub g.s.} nuclei appear with a probability of (26 ± 4)%, and (14 ± 3)% of them are produced in decays of an unstable {sup 9}B{sub g.s.} nucleus. The Be + H channel was suppressed to approximately 1%.

74 ATOMIC AND MOLECULAR PHYSICS↗

New CHOD detector for the NA62 experiment at CERN

The New CHOD is a scintillation hodoscope with a pad structure featuring a total of 148 counters. The signal from each pad is read out using wavelength-shifting fibers and two or four SensL SiPMs with a sensitive area of 3 × 3 mm{sup 2}. This photodetector has 4774 pixels 35 × 35 μm{sup 2} in size. The key parameters (photon detection efficiency, dark current, crosstalk, and gain) were measured for 500 SiPMs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Properties of Sb{sub 2}S{sub 3} and Sb{sub 2}Se{sub 3} thin films obtained by pulsed laser ablation

The properties of Sb{sub 2}S{sub 3} and Sb{sub 2}Se{sub 3} thin films of variable thickness deposited onto Al{sub 2}O{sub 3}, Si, and KCl substrates are investigated by the method of pulsed laser ablation. The samples are obtained at a substrate temperature of 180 Degree-Sign C in a vacuum chamber with a residual pressure of 10{sup -5} Torr. The thickness of the films amounted to 40-1500 nm. The structure of the bulk material of the targets and films is investigated by the methods of X-ray diffraction and transmission high-energy electron diffraction, respectively. The electrical properties of the films are investigated in the temperature range of 253-310 K. It is shown that the films have semiconductor properties. The structural features of the films determine their optical parameters.

36 MATERIALS SCIENCE↗

Synchrotron study of the formation of nanoclusters in Al{sub 2}O{sub 3}/SiO{sub x}/Al{sub 2}O{sub 3}/SiO{sub x}/ Horizontal-Ellipsis /Si(100) multilayer nanostructures

Al{sub 2}O{sub 3}/SiO{sub x}/Al{sub 2}O{sub 3}/SiO{sub x}/ Horizontal-Ellipsis /Si(100) multilayer nanoperiodic structures (MNS) are studied by X-ray absorption near-edge structure spectroscopy (XANES). Experimental XANES spectroscopy spectra are obtained using synchrotron radiation. The formation of Si nanoclusters in the surface layers of the structures during their high-temperature annealing is observed. The structures featured intense size-dependent photoluminescence in the wavelength region near 800 nm. At the same time, it is shown that the formation of aluminum silicates is possible. The inversion effect of the intensity of the XANES spectra during the interaction of synchrotron radiation with MNSs is revealed.

36 MATERIALS SCIENCE↗

Spatial redistribution of radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures

The spatial distribution of equilibrium and nonequilibrium (including luminescent) IR (infrared) radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures (λ{sub max} = 3.4 μm) is measured and analyzed; the structural features of the photodiodes, including the reflective properties of the ohmic contacts, are taken into account. Optical area enhancement due to multiple internal reflection in photodiodes with different geometric characteristics is estimated.

36 MATERIALS SCIENCE↗

Structure of thermoelectric films of higher manganese silicide on silicon according to electron microscopy data

The structural features of higher manganese-silicide films obtained by the diffusion doping of single-crystal silicon substrates with manganese vapor in a sealed cell and a flow-through quartz reactor with continuous pumping are comparatively analyzed. Scanning electron microscopy and high-resolution transmission electron microscopy show that a single-phase textured film of higher manganese silicide is formed in the evacuated cell. A change in the growth conditions from steady (cell) to quasi-steady-state (reactor) leads to the formation of polycrystalline islands of higher manganese silicide with nanoscale inclusions of the manganese- monosilicide phase.

36 MATERIALS SCIENCE↗

Study of the Effective Refractive Index Profile in Self-Assembling Nanostructured ITO Films

The optical characteristics and structural features of self-assembling nanostructured indium–tin oxide (ITO) films deposited onto substrates heated above 400°C are studied. Estimations of the distribution profiles of the material and effective refractive index in the films under study are obtained by computer simulation of a medium having spectral dependences of light transmission and reflection coefficients closest to those observed in the experiment. These results are in good agreement with scanning electron microscopy data for these films and make it possible to not only confirm the gradient character of such coatings but also restore some of its features. The further overgrowth of voids in self-assembling nanostructured films by means of the deposition of an additional material amount by magnetron sputtering at room temperature leads to a variation in the effective refractive index profile in them. Thus, it is possible to form transparent conductive films with an efficient refractive index profile adjusted for specific tasks. Adjustment of the refractive index profile in self-assembled ITO films acquires a special value for designing coatings with specified properties by virtue of a limited set of transparent conductive materials.

36 MATERIALS SCIENCE↗

Kinetics of Early Decomposition Stages in Diluted bcc Fe–Сu–Ni–Al Alloy: MC+MD Simulation

A combined approach including the Monte Carlo and molecular-dynamics simulation, decomposition kinetics and segregation formation in the multicomponent low-alloy Fe–1.5Cu–2Ni–1.5Al (at %) alloy is studied. It is shown that the formation of Cu nanoparticles surface-enriched with Ni and Al (coprecipitation mode) includes several stages: (i) the formation of clusters consisting of several Cu atoms, (ii) their enrichment with Ni and Al atoms, and (iii) redistribution of Ni and Al atoms with the formation of a surface layer providing stabilization of Cu nanoparticles. Observed structural features of segregations and their stability in Fe–Cu–Ni–Al alloys is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Hydrogenation on the Structure, Magnetic and Magnetocaloric Properties of Tb–Dy–Co Alloys with a Laves Phase Structure

A complex study of structure, phase composition, surface topology, magnetic, and magnetocaloric properties was performed for TbCo{sub 2} and Tb{sub 0.3}Dy{sub 0.7}Co{sub 2} compounds and for a Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}H{sub 0.5} hydride with a low hydrogen content. The hydrogenation was established to impact the structural features at the micro- and nanolevels, as well as the fundamental and functional properties. Introducing even a small amount of hydrogen in the crystal lattice of Tb{sub 0.3}Dy{sub 0.7}Co{sub 2} compound is found to cause an increase in both the Curie temperature and the magnetic moment at the cobalt atoms. The magnetic phase transition from the paramagnetic to the magnetically ordered state changes from the first (in Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}) to the second (in TbCo{sub 2} and Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}H{sub 0.5}) order, leading to a noticeable decrease in the magnetocaloric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micromagnetic and Magnetooptical Properties of Ferromagnetic/Heavy Metal Thin Film Structures

The magnetic properties of CoPt, CoPd, and FePd thin films with different contents of a ferromagnetic material fabricated by electron beam evaporation have been compared. The micromagnetic structure investigations have shown a decrease in the magnetic domain size with an increase in the Co content in the CoPt and CoPd films, which has been attributed to the presence of two magnetic phases in the films. The magnetooptical studies have shown anomalously large Faraday angles and the absence of Kerr effect in the CoPt films, which make them attractive for application in optics. In the FePd films, the minimum coercivity values have been obtained from the magnetic-field dependences of the magnetization, which has also been related to the magnetic structure features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties of Fullerene–Thermally Exfoliated Graphite Composites Doped with Sodium

The magnetic properties (field range H = 0–50 kOe, temperature range T = 3–300 K), and structural features of a sodium-doped carbon composite material based on fullerene C{sub 60} and thermally exfoliated graphite (TEG) are studied. The material is obtained with different ratios of the components by sintering at a pressure of 7 GPa and T = 600°C, at which it is found that significant amorphization of the crystal lattice of the initial C{sub 60} occurs. The dia-, para-, and ferromagnetic components (M{sub D}, M{sub PM}, and M{sub FM}) were separated from the total magnetic moment of the samples under study. It is found that a sodium dopant has no effect on the magnetic properties of the composite. Analysis of the M{sub PM}(H) field dependences by using the Brillouin function for the fullerene-containing sample (i.e., without TEG) makes it possible to determine the quantum number of the total angular momentum of paramagnetic (PM) centers. Its value is found to be J = 1, which corresponds to elementary magnetic moment μ{sub PM} = 2μ{sub B} of a PM center. The concentration of PM centers is estimated at the level of N{sub PM} ≈ (2–5) × 10{sup 18} g{sup –1} for most samples, including the material without TEG. The introduction of TEG into the initial composition and an increase in its proportion in the composite leads to a strong increase in the magnetic moment, which is explained by an increase in both the J value and the concentration of PM centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Organization of Detonation-Diamond Particles on a Substrate in Carbon Condensation from the Vapor–Gas Phase

Processes in which the island structure is ordered occur in composite carbon films produced by preliminary population of an amorphous substrate with a detonation-diamond system and subsequent condensation of carbon from the vapor–gas phase. These processes, observed already upon filling of the substrate with diamond-growth centers, are manifested in that there appears a structural periodicity of the islands. It was found that the condensation of carbon on the populated substrate is accompanied by the evolution of the island structure of primary growth centers. This consists in that a hexagonal packing of the islands is formed, with the size of these islands increasing by two orders of magnitude. All these structural features of how a composite diamond-carbon film is formed indicate that self-organization processes occur in the system of diamond islands when carbon atoms are condensed and interact with primary diamond crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Confocal Raman Microscopy for Measuring In Situ Temperature-Dependent Structural Changes in Poly(Ethylene Oxide) Thin Films

Crystallization from the melt is a critical process governing the properties of semi-crystalline polymeric materials. While structural analyses of melting and crystallization transitions in bulk polymers have been widely reported, in contrast, those in thin polymer films on solid supports have been underexplored. Herein, in situ Raman microscopy and self-modeling curve resolution (SMCR) analysis are applied to investigate the temperature-dependent structural changes in poly(ethylene oxide) (PEO) films during melting and crystallization phase transitions. By resolving complex overlapping sets of spectra, SMCR analysis reveals that the thermal transitions of 50 µm thick PEO films comprise two structural phases: an ordered crystalline phase and a disordered amorphous phase. The ordered structure of the crystalline PEO film entirely disappears as the polymer is heated; conversely, the disordered structure of the amorphous PEO film reverts to the ordered structure as the polymer is cooled. Broadening of the Raman bands was observed in PEO films above the melting temperature (67 °C), while sharpening of bands was observed below the crystallization temperature (45 °C). The temperatures at which these spectral changes occurred were in good agreement with differential scanning calorimetry (DSC) measurements, especially during the melting transition. The results illustrate that in situ Raman microscopy coupled with SMCR analysis is a powerful approach for unraveling complex structural changes in thin polymer films during melting and crystallization processes. Furthermore, we show that confocal Raman microscopy opens opportunities to apply the methodology to interrogate the structural features of PEO or other surface-supported polymer films as thin as 2 µm, a thickness regime beyond the reach of conventional thermal analysis techniques.

Koh, Miharu [Department of Chemistry, University o↗

Structural basis for PECAM-1 homophilic binding

Platelet endothelial cell adhesion molecule-1 (PECAM-1) is a 130-kDa member of the immunoglobulin gene superfamily (IgSF) that is present on the surface of circulating platelets and leukocytes, and highly expressed at the junctions of confluent endothelial cell monolayers. PECAM-1–mediated homophilic interactions, known to be mediated by its 2 amino-terminal immunoglobulin homology domains, are essential for concentrating PECAM-1 at endothelial cell intercellular junctions, where it functions to facilitate diapedesis, maintain vascular integrity, and transmit survival signals into the cell. Given the importance of PECAM-1–mediated homophilic interactions in mediating each of these cell physiological events, and to reveal the nature and orientation of the PECAM-1–PECAM-1 homophilic-binding interface, we undertook studies aimed at determining the crystal structure of the PECAM-1 homophilic-binding domain, which is composed of amino-terminal immunoglobulin homology domains 1 and 2 (IgD1 and IgD2). The crystal structure revealed that both IgD1 and IgD2 exhibit a classical IgSF fold, having a β-sandwich topology formed by 2 sheets of antiparallel β strands stabilized by the hallmark disulfide bond between the B and F strands. Interestingly, despite previous assignment to the C2 class of immunoglobulin-like domains, the structure of IgD1 reveals that it actually belongs to the I2 set of IgSF folds. Both IgD1 and IgD2 participate importantly in the formation of the trans homophilic-binding interface, with a total buried interface area of >2300 Å 2 . These and other unique structural features of PECAM-1 allow for the development of an atomic-level model of the interactions that PECAM-1 forms during assembly of endothelial cell intercellular junctions.

59 BASIC BIOLOGICAL SCIENCES↗

iPNHOT: a knowledge-based approach for identifying protein-nucleic acid interaction hot spots

The interaction between proteins and nucleic acids plays pivotal roles in various biological processes such as transcription, translation, and gene regulation. Hot spots are a small set of residues that contribute most to the binding affinity of a protein-nucleic acid interaction. Compared to the extensive studies of the hot spots on protein-protein interfaces, the hot spot residues within protein-nucleic acids interfaces remain less well-studied, in part because mutagenesis data for protein-nucleic acids interaction are not as abundant as that for protein-protein interactions. In this study, we built a new computational model, iPNHOT, to effectively predict hot spot residues on protein-nucleic acids interfaces. One training data set and an independent test set were collected from dbAMEPNI and some recent literature, respectively. To build our model, we generated 97 different sequential and structural features and used a two-step strategy to select the relevant features. The final model was built based only on 7 features using a support vector machine (SVM). The features include two unique features such as ΔSASsa 1/2 and esp3, which are newly proposed in this study. Based on the cross validation results, our model gave F1 score and AUROC as 0.725 and 0.807 on the subset collected from ProNIT, respectively, compared to 0.407 and 0.670 of mCSM-NA, a state-of-the art model to predict the thermodynamic effects of protein-nucleic acid interaction. The iPNHOT model was further tested on the independent test set, which showed that our model outperformed other methods. Here, by collecting data from a recently published database dbAMEPNI, we proposed a new model, iPNHOT, to predict hotspots on both protein-DNA and protein-RNA interfaces. The results show that our model outperforms the existing state-of-art models. Our model is available for users through a webserver: http://zhulab.ahu.edu.cn/iPNHOT/.

59 BASIC BIOLOGICAL SCIENCES↗

Nanometer-scale structure differences in the myofilament lattice spacing of two cockroach leg muscles correspond to their different functions

ABSTRACT Muscle is highly organized across multiple length scales. Consequently, small changes in the arrangement of myofilaments can influence macroscopic mechanical function. Two leg muscles of a cockroach have identical innervation, mass, twitch responses, length–tension curves and force–velocity relationships. However, during running, one muscle is dissipative (a ‘brake’), while the other dissipates and produces significant positive mechanical work (bifunctional). Using time-resolved X-ray diffraction in intact, contracting muscle, we simultaneously measured the myofilament lattice spacing, packing structure and macroscopic force production of these muscles to test whether structural differences in the myofilament lattice might correspond to the muscles' different mechanical functions. While the packing patterns are the same, one muscle has 1 nm smaller lattice spacing at rest. Under isometric stimulation, the difference in lattice spacing disappeared, consistent with the two muscles' identical steady-state behavior. During periodic contractions, one muscle undergoes a 1 nm greater change in lattice spacing, which correlates with force. This is the first identified structural feature in the myofilament lattice of these two muscles that shares their whole-muscle dynamic differences and quasi-static similarities.

Tune, Travis Carver↗

Highly Catalytically Active High-spin Single-atom Iron Catalyst Supported by Catechol-containing Microporous 2D Polymer

Traditionally, Fe-SACs are prepared through energy-intense processes, which often lead to the loss of precision in structural features from the starting substrates and impeding rational design. In this work, we have described the synthesis of a unique catechol-containing porous polymer with designed features in the substrates maintained, affording atomically dispersed iron catalyst (Fe-SAC) through treatment of ferrous chloride (FeCl 2 ). An aberration-corrected scanning transmission electron microscope (AC-STEM) and synchrotron X-ray absorption spectroscopy (XAS) were employed to shed light on the local coordination geometry of the atomically dispersed iron catalyst. The resulting Fe-SAC exhibits excellent catalytic performance in reduction of nitroaromatics with highest molar K app among all Fe based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid quantum nanophotonic devices with color centers in nanodiamonds [Invited]

Optically active color centers in nanodiamonds offer unique opportunities for generating and manipulating quantum states of light. These mechanically, chemically, and optically robust emitters can be produced in mass quantities, deterministically manipulated, and integrated with a variety of quantum device geometries and photonic material platforms. Nanodiamonds with deeply sub-wavelength sizes coupled to nanophotonic structures feature a giant enhancement of light-matter interaction, promising high bitrates in quantum photonic systems. We review the recent advances in controlled techniques for synthesizing, selecting, and manipulating nanodiamond-based color centers for their integration with quantum nanophotonic devices.

Sahoo, Swetapadma (ORCID:0000000179281391)↗