Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redesign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Mechanical Fasteners for Advanced Composite Materials

Advanced composite materials, which are increasingly being used to build aircraft, have different properties than the metals they replace. Fasteners intended for composite-material joints must be designed and selected to allow for these differences. For example, blind fasteners (one-sided access) used to assemble composite-to-composite joints have been redesigned to expand to larger diameters to resist pull-through and cocking failures. The fastener designs needed for composite materials are reviewed. Topics discussed are: galvanic corrosion, pull-through resistance, fastener rotation, installation damage, fastener galling and conductivity. A blind fastener recently developed by SPS Technologies is described to show how these requirements are incorporated.

Landt, R. C.↗

An analysis of cryotrap heat exchanger performance test data (400 area) and recommendations for a system to handle Apollo RCS engines

The current arrangement of a Platecoil heat exchanger which uses LN2 on the inside of parallel tubes, in counter flow to the test cell engine exhaust gases which are drawn through a box surrounding the plates by the existing vacuum blowers is examined. As a result of inadequate performance and special test data it was decided to redesign the system to accommodate an Apollo RCS engine.

Rakow, A.↗

Mod-2 wind turbine field operations experiment

The three-machine, 7.5 MW Goodnoe Hills located near Goldendale, Washington and is now in a research/experimental operations phase that offers a unique opportunity to study the effects of single and multiple wind turbines interacting with each other, the power grid; and the environment. Following a brief description of the turbine and project history, this paper addresses major problem areas and research and development test results. Field operations, both routine and nonroutine, are discussed. Routine operation to date has produced over 13,379,000 KWh of electrical energy during 11,064 hr of rotation. Nonroutine operation includes suspended activities caused by a crack in the low speed shaft that necessitated a redesign and reinstallation of this assembly on all three turbines. With the world's largest cluster back in full operation, two of the turbines will be operated over the next years to determine their value as energy producer. The third unit will be used primarily for conducting research tests requiring configuration changes to better understand the wind turbine technology. Technical areas summarized pertain to system performance and enhancements. Specific research tests relating to acoustics, TV interference, and wake effects conclude the paper.

Gordon, L. H.↗

Ion Mobility Drift Spectrometer (IMDS) as a flight analytical instrument technique

A detailed knowledge of the history and abundances of the biogenic elements and their compounds throughout the solar system can provide the exobiologists with a basis for understanding the conditions necessary for chemical evolution and the origin of life. The Ion Mobility Drift Spectrometer is an ion molecule reactor coupled with an ion drift spectrometer. Sample molecules are ionized to form product ions in the reactant region. An electric field moves the ions through a drift region against the flow of a drift gas where they are separated according to their size and structure producing an ion mobility spectrum. These spectra provide the IMDS with virtually universal sample identification capability. To conform to the rigid limits of weight, volume and consumables placed on flight instrumentation, several aspects of the IMDS must be studied and redesigned for flight use. In addition to miniaturization of the instrument, a reduction in the high flow rates used for the drift gas is an obvious necessary consideration. The effect of drastically reduced drift flow rates on IMDS spectra was investigated by lowering flow rates from 500ml/min to 50ml/min. Changes in peak shape, drift time and total spectra were studied at each flow rate.

Kojiro, D. R.↗

SSME fuel preburner phase 1/phase 2+ comparison

An analytical comparison of the predicted combustion flowfields for the Phase 1 and Phase 2+ fuel preburner configurations using an advanced CFD combustion code is currently underway at Rocketdyne. The Phase 2+ injector has a modified element design. The redesigned element provides for improved atomization through a shift in the injector element/face bleed flow split while maintaining an acceptable pressure drop. Cold-flow tests of the new design have been encouraging. As a complement to those tests, the Advanced Rocket Injector Combustor Code (ARICC) was selected to conduct a detailed combustion flowfield simulation. ARICC models two-dimensional (or axisymmetric), transient, turbulent, two-phase mixing and combustion flowfields. It is derived from a member of the Los Alamos ICEd-ALE family of codes. Unique features of ARICC include explicit representation of the coaxial LOX jet and hydrogen gas flows, distributed atomization processes, droplet breakup, and supercritical vaporation processes. Predictions of temperature and OH concentration profiles for the Phase 1 and Phase 2+ injector flowfields indicate a trend toward more uniform temperature distributions and shorter flame lengths with the Phase 2+ design.

Jensen, R. J.↗

PCDS overview

A brief overview of the philosophy, design, and organization of the Pilot Climate Data System (PCDS) is presented. The design has evolved, over time, to deal with numerous data sets, provide appropriate tools for the manipulation and display of such data, and support a wide variety of users. The user interface to the system is provided by the Transportable Applications Executive (TAE). A user can choose one of the five major subsystems from the root menu display. These subsystems are CATALOG, INVENTORY, DATA ACCESS, DATA MANIPULATION, and GRAPHICS. Each subsystem was discussed and examples were given, demonstrating the flexibility provided by the existing PCDS software, Version 3.3. Three of these subsystems are presently being redesigned to provide a more flexible and friendly structure, to allow more consistency and facilitate the ability to support new data sets. Ongoing developmental efforts to migrate from the Version 3.3 prototype phase of PCDS to the operational Version 4.0 stress increased flexibility and data independence.

Treinish, L.↗

Laser techniques for arc jet plasma diagnostics; continuation of a feasibility and design study

This study is concerned with the continuation of a feasibility and design study of laser-based diagnostic techniques for the non-instrusive measurement of species concentrations, temperatures, and velocity in the low density, high enthalpy flow through the arc-heated wind tunnel facility (ARMSEF) at NASA/JSC. Last summer several laser-induced radiation scattering methods were investigated and some preliminary measurements of the spectral distribution of radiation emitted by the arc-heated gas flow were made. Based upon those preliminary measurements and subsequent investigations, four laser-induced radiation scattering methods were selected for further detailed study, and preliminary design of a measurement system has been undertaken. Further measurements of the spectral distribution of radiation emitted from the arc-heated free stream and shock layer flows, using a redesigned measurement system, have been made for one axial position in the flow for a range of tunnel operating power levels. Further study of the literature for physical property data, theoretical models of processes, and applications of the diagnostic methods has been also carried out.

Wierum, F. A.↗

Space Station momentum control and reboost requirements for two power generation concepts

Results are presented of dynamic structural analyses of 75 and 300 kW versions of a solar dynamic (SD) power supply for the Space Station (MSS). The SD is being seriously considered as an alternative to solar panels due to lower areal and mass requirements and higher efficiencies. The functioning principle is to use parabolic concentrators to focus sunlight on a heat engine to boil liquids to drive a turbine. Potential problems are foreseen in terms of the torques which would be experienced by the MSS and the subsequent orbital stability effects. The stability would be altered by changing aerodynmaic drag, altered moment of inertia and angular momentum and the altered center of mass location. The problem is exacerbated by the need to first equip the MSS with solar panels while the SD technology is developed. The analysis shows that the attitude control system will need to be redesigned and resized to accommodate MSS growth with either power system. The effects of the rotating parts of the SD system can be minimized, but further studies are required to determine the effects on the pointing accuracy of the SD, which must be 10 times as precise as that needed by a photovoltaic array.

Farmer, J. T.↗

Cognitive network organization and cockpit automation

Attention is given to a technique for the derivation of pilot cognitive networks from empirical data, which has been successfully used to guide the redesign of the Control Display Unit that serves as the primary interface of the complex flight management system being developed by NASA's Advanced Concepts Flight Simulator program. The 'pathfinder' algorithm of Schvaneveldt et al. (1985) is used to obtain the conceptual organization of four pilots by generating a family of link-weighted networks from a set of psychological distance data derived through similarity ratings. The degree of conceptual agreement between pilots is assessed, and the means of translating a cognitive network into a menu structure are noted.

Roske-Hofstrand, R. J.↗

Polynomic nonlinear dynamical systems - A residual sensitivity method for model reduction

The motivation for using polynomic combinations of system states and inputs to model nonlinear dynamics systems is founded upon the classical theories of analysis and function representation. A feature of such representations is the need to make available all possible monomials in these variables, up to the degree specified, so as to provide for the description of widely varying functions within a broad class. For a particular application, however, certain monomials may be quite superfluous. This paper examines the possibility of removing monomials from the model in accordance with the level of sensitivity displayed by the residuals to their absence. Critical in these studies is the effect of system input excitation, and the effect of discarding monomial terms, upon the model parameter set. Therefore, model reduction is approached iteratively, with inputs redesigned at each iteration to ensure sufficient excitation of remaining monomials for parameter approximation. Examples are reported to illustrate the performance of such model reduction approaches.

Yurkovich, S.↗

A long-life 50 lbf H2/O2 thruster for Space Station auxiliary propulsion

In preparation for the development of a manned Space Station, the National Aeronautics and Space Administration (NASA) is conducting a program to develop technology related to on-board Auxiliary Propulsion Systems. To develop the required thruster technology to support the Space Station project, the NASA Lewis Research Center has sponsored a development program based on a unique 'reverse flow' concept where the fuel is injected 'backwards' in the chamber to cool the spherical combustor wall. This combustor was based on previous developments at the 50-lbf, 1000-lbf, and 1500-lbf thrust levels. This paper describes the design and test program carried out to demonstrate a new 50-lbf thruster, the design which was based on this previous technology. Included are the test results for the initial mixture ratio 4 thruster which can operate with uncooled Cres (stainless steel) combustor walls. In addition, the effort to operate a thruster redesigned for operation at a mixture ratio of eight for potential integration with the life support system is described.

Senneff, J. M.↗

Simulation results of automatic restructurable flight control system concepts

The restructurable flight control system (RFCS) described by Weiss et al. (1986) is reviewed, and several results of an extensive six degrees of freedom nonlinear simulation of several aspects of this system are reported. It is concluded that the nontraditional use of standard control surfaces in a nominal feedback control system to spread control authority among many redundant control elements provides a significant amount of fault tolerance without any use of restructuring techniques. The use of new feedback gains alone following a failure can provide significantly improved recovery as long as the control elements remain within their travel limits and as long as uncertainty about the failure identity is properly handled. The use of the feed-forward trim solution in conjunction with redesigned feedback gains allows recovery to take place even when significant control saturation occurs.

Weiss, J. L.↗

Phase-Center Extension for a Microwave Feed Horn

Corrugated cylindrical tube relocates phase center of Cassegrain antenna feed. Proposed modification increases aperture of Cassegrain antenna from 64 to 70 m. Relatively inexpensive extension moves phase center of feed without incurring cost of redesigning horn and relocating low-noise equipment. Extension does not affect polarization characteristics of feed.

Hartop, R. W.↗

Reducing Fatigue in a Rotary Flowmeter

Redesign of vanes straightening flow of liquid in rotary flowmeter increase fatigue lives of vanes and rotor. Purpose of vanes to eliminate turbulence so proportionality between flow and rotor speed constant. Nonuniform but symmetrical, new spacing of straightener vanes prevents flow wake from strongly interacting with rotor blades. At same time, vanes ensure accurate flow-rate measurement.

Rao, G.↗

High-Pressure Valve With Controlled Seating Force

Poppet and seat less likely to be damaged by faulty operation. Improvements in widely-used high-pressure valve increase accuracy of preloading of poppet. Redesigned valve prevents metal shavings and other debris from developing during operation, installation, or removal. New features include secondary seal in cap. Belleville washers create precise value of seating force. If installer attempts to exceed force, torque limiter gives tactile and aural warning and makes further force increases difficult.

Bradley, R. H.↗

Higher-Quality Weld Joints for Tube Sections

Less material in weld inserts results in better fusion. Redesigned insert for joining tubes by welding improves quality of weld. In new insert, leg of T shorter so it does not protrude into tube cavity.

Olszewski, John T.↗

Practical considerations in aeroelastic design

The structural design process for large transport aircraft is described. Critical loads must be determined from a large number of load cases within the flight maneuver envelope. The structural design is also constrained by considerations of producibility, reliability, maintainability, durability, and damage tolerance, as well as impact dynamics and multiple constraints due to flutter and aeroelasticity. Aircraft aeroelastic design considerations in three distinct areas of product development (preliminary design, advanced design, and detailed design) are presented and contrasted. The present state of the art is challenged to solve the practical difficulties associated with design, analysis, and redesign within cost and schedule constraints. The current practice consists of largely independent engineering disciplines operating with unorganized data interfaces. The need is then demonstrated for a well-planned computerized aeroelastic structural design optimization system operating with a common interdisciplinary data base. This system must incorporate automated interfaces between modular programs. In each phase of the design process, a common finite-element model for static and dynamic optimization is required to reduce errors due to modeling discrepancies. As the design proceeds from the simple models in preliminary design to the more complex models in advanced and detailed design, a means of retrieving design data from the previous models must be established.

Rommel, B. A.↗

Dual structural-control optimization of large space structures

A new approach is proposed for solving dual structural-control optimization problems for high-order flexible space structures where reduced-order structural models are employed. For a given initial structural dessign, a quadratic control cost is minimized subject to a constant-mass constraint. The sensitivity of the optimal control cost with respect to the stuctural design variables is then determined and used to obtain successive structural redesigns using a contrained gradient optimization algorithm. This process is repeated until the constrained control cost sensitivity becomes negligible. A numerical example is presented which demonstrates that this new approach effectively addresses the problem of dual optimization for potentially very high-order structures.

Messac, A.↗