The use of Landsat multispectral data to derive land cover information for the location and quantification of non-point source water pollutants
Explore the source record for details and available documents.
Fostel, H. F.↗
SEARCH · Engineering Papers
Results for “quantification”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantification of monocarboxylic acids from a spark discharge synthesis
A suite of sixteen monocarboxylic acids having carbon numbers 2 to 7, formed by the Miller-Urey spark discharge process, was identified and quantified by gas chromatography and mass fragmentography using a deuterium spiking technique. The molar concentration and isomeric distribution of these laboratory synthesized monocarboxylic acids are compared to those previously reported for the Murchison meteorite. They show similar trends, namely, decreasing molar concentration with increasing molecular weight, and a ratio of normal/branched isomers tending toward smaller values with increasing carbon numbers.
Yuen, G. U.↗
Quantification of pilot workload via instrument scan
The use of visual scanning behavior as an indicator of pilot workload is described. The relationship between level of performance on a constant piloting task under simulated IFR conditions, the skill of the pilot the level of mental workload induced by an additional verbal task imposed on the basic control task, and visual scanning behavior is investigated. An increase in fixation dwell times, especially on the primary instrument with increased mental loading is indicated. Skilled subjects 'stared' less under increased loading than did novice pilots. Sequences of instrument fixations were also examined. The percentage occurrence of the subject's most used sequences decreased with increased task difficulty for novice subjects but not for highly skilled subjects. Entropy rate (bits/sec) of the sequence of fixations was also used to quantify the scan pattern. It consistently decreased for most subjects as the four loading levels used increased.
Tole, J. R.↗
Quantification of airport community noise impact in terms of noise levels, population density, and human subjective response
The Fraction Impact Method (FIM), developed by the National Research Council (NRC) for assessing the amount and physiological effect of noise, is described. Here, the number of people exposed to a given level of noise is multiplied by a weighting factor that depends on noise level. It is pointed out that the Aircraft-noise Levels and Annoyance MOdel (ALAMO), recently developed at NASA Langley Research Center, can perform the NRC fractional impact calculations for given modes of operation at any U.S. airport. The sensitivity of these calculations to errors in estimates of population, noise level, and human subjective response is discussed. It is found that a change in source noise causes a substantially smaller change in contour area than would be predicted simply on the basis of inverse square law considerations. Another finding is that the impact calculations are generally less sensitive to source noise errors than to systematic errors in population or subjective response.
Deloach, R.↗
Quantification of crew workload imposed by communications-related tasks in commercial transport aircraft
Information theoretic analysis and subjective paired-comparison and task ranking techniques were employed in order to scale the workload of 20 communications-related tasks frequently performed by the captain and first officer of transport category aircraft. Tasks were drawn from taped conversations between aircraft and air traffic controllers (ATC). Twenty crewmembers performed subjective message comparisons and task rankings on the basis of workload. Information theoretic results indicated a broad range of task difficulty levels, and substantial differences between captain and first officer workload levels. Preliminary subjective data tended to corroborate these results. A hybrid scale reflecting the results of both the analytical and the subjective techniques is currently being developed. The findings will be used to select representative sets of communications for use in high fidelity simulation.
Acton, W. H.↗
Quantification of Saint-Venant's Principle for a General Prismatic Member
A semi-analytic finite element method for finding the decay rates of edge effects in anisotropic layered plates was extended to the treatment of prismatic members of an arbitrary cross section composed of any number of anisotropic elements. The displacement fields corresponding to the decay rates with positive real part were determined for a homogenous graphite/epoxy plate two units thick. The behavior of a rectangular beam is also considered.
Source record↗
Quantification of Cross-coupling and Motion Feedthrough for Multiaxis Controllers Used in an Air Combat Flying Task
A real-time piloted simulation of an air-to-air combat flying task using a wings-level-turn aircraft and various novel controllers was conducted. One objective is to quantify how the pilot interacts with the controllers and control modes, including: (1) controller versus aircraft response; (2) proprioceptive cross-coupling among axes of the controllers; and (3) biodynamic cross-coupling between the aircraft motions and the controllers. In order to aid in identifying the items listed above, both the target aircraft and the large amplitude multimode aerospace research simulator (LAMARS) motion system were distributed with quasi-random sums-of-sinusoids. Since the disturbances were separated in frequency, spectral analysis techniques were used to identify the three items listed. The results of the spectral analysis of controller motions from the two-axis side stick, a twist grip mounted on the side stick, a thumb button mounted on the side stick, and conventional rudder pedals are presented. Conclusions and recommendations for further research are also presented.
Jewell, W. E.↗
Stratospheric HNO3 quantification from line-by-line nonlinear least-squares analysis of high-resolution balloon-borne solar absorption spectra in the 870/cm region
Line parameters for the nu(5) and 2nu(9) bands and associated hot bands of HNO3 have been calculated and compared with laboratory spectra, and the results are presented. Spectral intervals near 870/cm for which best agreement was obtained are used to quantitatively analyze HNO3 absorption features in 0.02/cm resolution stratospheric solar absorption spectra.
Goldman, A.↗
Quantification of advanced turboprop aircraft flyover noise annoyance
A laboratory experiment was conducted to quantify the annoyance to advanced turboprop (propfan) aircraft flyover noise. A computer synthesis system was used to generate 45 realistic, time varying simulations of propeller aircraft flyover noise in which the tonal content was systematically varied to represent the factorial combinations of five fundamental frequencies, three frequency envelope shapes, and three tone-to-broadband noise ratios. In the experiment, 64 subjects judged the annoyance of recordings of the 45 synthesized flyover noises presented at three sound levels in a test facility which simulates the outdoor acoustic environment. Analyses of the judgements showed that frequency envelope shape did not significantly affect annoyance. The interaction of fundamental frequency with tone-to-broadband noise ratio did have a large and complex effect on annoyance. Duration corrected A-weighted sound pressure level with a modified tone correction predicted annoyance better than any other measurement procedure.
Mccurdy, D. A.↗
Quantification of waste morphology in Martian fretted terrain
Qualitative and quantitative analyses are performed on the northern fretted terrain of the Martian Isnenius Lacus quadrangle to determine the formation processes. The fretted terrain lies between 35-50 deg N latitude and 305-350 deg W longitude and was mapped with Viking orbiter instrumentation. The dominant landforms are a sequence of heavily cratered terrain, scattered flat-floored, fretted valleys, linear waste-covered valleys between flat-topped mesas, circum-mesa debris areas, a transition from mesas to knobby terrain, fewer upland forms, and low-relief, mantled, polar plains. The features spread out from a cratered terrain boundary in a succession of shapes. A principal components analysis characterizes definable spatial variations in the surface morphology and suggests that the features are youngest in the southwest direction. Relationships are also found between neighboring features. The principal components analysis technique is concluded to be a valuable tool for explaining the geomorphic evolution of the Martian surface.
Kochel, R. C.↗
Quantification of the effects of generation volume, surface recombination velocity, and diffusion length on the electron-beam-induced current and its derivative Determination of diffusion lengths in the low micron and submicron ranges
A systematic and quantitative analysis is carried out to investigate the effects of the shape (point, cube, Gaussian) and size of the generation volume, the surface recombination velocity, and the diffusion length on the electron-beam-induced current (EBIC) and its derivative (DEIC). Thick homogeneously doped samples exhibiting diffusion lengths in the low micron and submicron range are considered. The results are presented in computed EBIC curves as a function of scanning distance and of the ratio true diffusion length/effective diffusion length. Shown using these curves are: (1) a simple and yet rigorous method for the determination of the true diffusion length, taking into consideration all of the factors cited above, (2) a method for the rapid determination of the surface recombination velocity, (3) the condition under which the source shape becomes insignificant, and (4) a new value for the lower limit of the diffusion length which can be determined by the EBOC technique.
Luke, K. L.↗
Quantification of Saint-Venant's principle for a general prismatic member
A method to quantify Saint-Venant's principle for general prismatic members is described. Finite elements are used to model the member cross-section to allow the analysis of arbitrary geometries, material properties, and nonhomogeneities. The variation in the structural response along the member's length, away from the loaded end, is modelled with an exponential decay which has been established in the literature to be the correct form. Many analytic results exist in the literature for special cases. Because of its ability to handle arbitrary cross sectional geometries, this semi-analytic finite element method can provide a firm footing for the utilization of Saint-Venant's principle for whole new classes of problems. Results for several typical problems are given.
Goetschel, D. B.↗
Analysis and quantification of errors in the geometric correction of satellite images
The quantitative use of remote sensing satellite images in many applications requires that the geometric distortion inherent in these images be corrected, or rectified, to a desired map projection. The most widely used technique relies on ground control points to empirically determine a mathematical coordinate transformation to correct the geometry. In this paper, using the method of least squares, expressions for the accuracy of the geometric transformation and of the rectification of the satellite image to a map projection are derived. Explicit relations between the global accuracy of the transformation and the number, location, and local accuracy of the ground control points are obtained. The results are applied to the correction of a Landsat MSS image.
Ford, G. E.↗
Device for rapid quantification of human carotid baroreceptor-cardiac reflex responses
A new device has been designed, constructed, and evaluated to characterize the human carotid baroreceptor-cardiac reflex response relation rapidly. This system was designed for study of reflex responses of astronauts before, during, and after space travel. The system comprises a new tightly sealing silicon rubber neck chamber, a stepping motor-driven electrodeposited nickel bellows pressure system, capable of delivering sequential R-wave-triggered neck chamber pressure changes between +40 and -65 mmHg, and a microprocessor-based electronics system for control of pressure steps and analysis and display of responses. This new system provokes classic sigmoid baroreceptor-cardiac reflex responses with threshold, linear, and saturation ranges in most human volunteers during one held expiration.
Sprenkle, J. M.↗
Maximum Entropy/Optimal Projection (MEOP) control design synthesis: Optimal quantification of the major design tradeoffs
The underlying philosophy and motivation of the optimal projection/maximum entropy (OP/ME) stochastic modeling and reduced control design methodology for high order systems with parameter uncertainties are discussed. The OP/ME design equations for reduced-order dynamic compensation including the effect of parameter uncertainties are reviewed. The application of the methodology to several Large Space Structures (LSS) problems of representative complexity is illustrated.
Hyland, D. C.↗
Quantification of observed flare parameters in relation to a shear-index and verification of MHD models for flare prediction
The goal for the SAMEX magnetograph's optical system is to accurately measure the polarization state of sunlight in a narrow spectral bandwidth over the field of view of an active region to make an accurate determination of the magnetic field in that region. The instrumental polarization is characterized. The optics and coatings were designed to minimize this spurious polarization introduced by foreoptics. The method developed to calculate the instrumental polarization of the SAMEX optics is described.
Wu, S. T.↗
Quantification of HCl from high-resolution, ground-based, infrared solar spectra in the 3000 per cm region
Recent ground-based infrared solar spectra at 0.02 per cm resolution in the 3000 per cm region have been analyzed for the atmospheric content of HCl. Nonlinear spectral least-squares fitting applied to spectra obtained at several zenith angles shows little sensitivity of the results to tropospheric HCl but provides an accurate measurement of the total column amount.
Goldman, A.↗
Intracavity absorption with a continuous wave dye laser - Quantification for a narrowband absorber
An experimental investigation of the dependence of intracavity absorption on factors including transition strength, concentration, absorber path length, and pump power is presented for a CW dye laser with a narrow-band absorber (NO2). A Beer-Lambert type relationship is found over a small but useful range of these parameters. Quantitative measurement of intracavity absorption from the dye laser spectral profiles showed enhancements up to 12,000 (for pump powers near lasing threshold) when compared to extracavity measurements. The definition of an intracavity absorption coefficient allowed the determination of accurate transition strength ratios, demonstrating the reliability of the method.
Brobst, William D.↗