Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “production process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A probabilistic analysis of silicon cost

Silicon materials costs represent both a cost driver and an area where improvement can be made in the manufacture of photovoltaic modules. The cost from three processes for the production of low-cost silicon being developed under the U.S. Department of Energy's (DOE) National Photovoltaic Program is analyzed. The approach is based on probabilistic inputs and makes use of two models developed at the Jet Propulsion Laboratory: SIMRAND (SIMulation of Research ANd Development) and IPEG (Improved Price Estimating Guidelines). The approach, assumptions, and limitations are detailed along with a verification of the cost analyses methodology. Results, presented in the form of cumulative probability distributions for silicon cost, indicate that there is a 55% chance of reaching the DOE target of $16/kg for silicon material. This is a technically achievable cost based on expert forecasts of the results of ongoing research and development and do not imply any market prices for a given year.

Reiter, L. J.↗
NASA NTRS1983

Dry etching of metallization

The production dry etch processes are reviewed from the perspective of microelectronic fabrication applications. The major dry etch processes used in the fabrication of microelectronic devices can be divided into two categories - plasma processes in which samples are directly exposed to an electrical discharge, and ion beam processes in which samples are etched by a beam of ions extracted from a discharge. The plasma etch processes can be distinguished by the degree to which ion bombardment contributes to the etch process. This, in turn is related to capability for anisotropic etching. Reactive Ion Etching (RIE) and Ion Beam Etching are of most interest for etching of thin film metals. RIE is generally considered the best process for large volume, anisotropic aluminum etching.

Bollinger, D.↗
NASA NTRS1983

Investigation of test methods, material properties, and processes for solar cell encapsulants

A study of potentially useful low cost encapsulation materials for the Flat-Plate Solar Array project is discussed. The goal is to identify, evaluate, test and recommend encapsulant materials and processes for the production of cost-effective, long life solar cell modules. Technical investigations included studies of aging and degradation of candidate encapsulation materials, continued identification of primers for durable bonding of module interfaces, continued evaluation of soil resistant treatments for the sunlit surface of the module and testing of corrosion protective coatings for use low cost mild steel substrates.

Willis, P. B.↗
NASA NTRS1984

Process of making medical clip

An X-ray transparent and biologically inert medical clip for treating aneurisms and the like is disclosed, as well as a process for its production. A graphite reinforced composite film is molded into a unitary structure having a pair of hourglass-like cavities which are hinged together with a pair of jaws for grasping the aneurism extending from the wall of one cavity. A silicone rubber pellet is disposed in the other cavity to exert a spring force through the hinge area to normally bias the jaws into contact with each other.

Baucom, R. M.↗
NASA NTRS1983

Building an information model (with the help of PSL/PSA)

Problem Statement Language/Problem Statement Analyzer (PSL/PSA) applications, which were once a one-step process in which product system information was immediately translated into PSL statements, have in light of experience been shown to result in inconsistent representations. These shortcomings have prompted the development of an intermediate step, designated the Product System Information Model (PSIM), which provides a basis for the mutual understanding of customer terminology and the formal, conceptual representation of that product system in a PSA data base. The PSIM is initially captured as a paper diagram, followed by formal capture in the PSL/PSA data base.

Callender, E. D.↗
NASA NTRS1984

Review of SERI Solar Pond Work

Development of models of pond thermal performance; analysis of solar pond use for building space heat and hot water production; use of low-temperature pond-produced heat for industrial processes, desalination, and electricity production; development of direct-contact heat exchanger to reduce conversion equipment cost; determination of effects of extracted heat and mass from the storage layer on pond performance; and investigation of factors which determine gradient layer stability and the stability of this interface between this level and the upper and lower convecting layers were described.

Zangrando, F.↗
NASA NTRS1984

Effect of water on hydrogen permeability

Doping of hydrogen with CO or CO2 was developed to reduce hydrogen permeation in Stirling engines by forming low permeability oxide coatings in the heater tubes. An end product of this process is water - which can condense in the cold parts of the engine system. If the water vapor is reduced to a low enough level, the hydrogen can reduce the oxide coating resulting in increased permeability. The equilibrium level of water (oxygen bearing gas) required to avoid reduction of the oxide coating was investigated. Results at 720 C and 13.8 MPa have shown that: (1) pure hydrogen will reduce the coating; (2) 500 ppm CO (500 ppm water equivalent) does not prevent the reduction; and (3) 500 ppm CO2 (1000 ppm water) appears to be close to the equilibrium level. Further tests are planned to define the equilibrium level more precisely and to extend the data to 820 C and 3.4, 6.9, and 13.8 MPa.

Hulligan, D. D.↗
NASA NTRS1985

Recent Developments in Nonlinear Normal Mode Initialization

The importance of a balanced initial condition upon GLAS GCM forecasts and assimilation cycles was assessed. An effort to combine previous work on normal mode initialization at GLA is underway to develop an initialization process for the production version of the GLAS 4th order GCM. The major aspects of this work fall into two parts: vectorization of the linear projector code and the insertion of the mode projector and Machenhauer iteration algorithm into the full GLAS GCM. Memory and paging constraints place restrictions on the number of horizontal modes stored for initialization purposes, and on the manner in which they are stored. Only the first five vertical structures of the gravity modes are used. Differing phase and normalization conventions provided many elusive coding errors. A Machenhauer nonlinear normal mode initialization technique is used. This method entails the insertion of a modified version of the mode projector into the full GCM, and the modification of the GCM to allow for iterative calls to the projector.

Bloom, S. C.↗
NASA NTRS1985

Cyanobacterial mats: Microanalysis of community metabolism

The microbial communities in two sites were studied using several approaches: (1) light microscopy; (2) the measurement of microprofiles of oxygen and sulfide at the surface of the microbial mat; (3) the study of diurnal variation of oxygen and sulfides; (4) in situ measurement of photosynthesis and sulfate reduction and study of the coupling of these two processes; (5) measurement of glutathione in the upper layers of the microbial mat as a possible oxygen quencher; (6) measurement of reduced iron as a possible intermediate electron donor along the established redoxcline in the mats; (7) measurement of dissolved phosphate as an indicator of processes of break down of organic matter in these systems; and (8) measurement of carbon dioxide in the interstitial water and its delta C-13 in an attempt to understand the flow of CO2 through the systems. Microbial processes of primary production and initial degradation at the most active zone of the microbial mat were analyzed.

Cohen, Y.↗
NASA NTRS1985

Angular distribution and multiplicity of backward hadrons in hFe interactions at 0.5-5.0 TeV energies (PION Experiment)

Based on the analysis of approximates 5 X 1000 events registered on the PION installation, data are obtained on the angular distribution and multiplicity of particles, flying back into the laboratory coordinate system (LCS) that are identified mainly as hadrons produced in the reactions of hFe yield h prime X type. The inclusively produced hadron energy is 200 MeV. The experimental data are compared to the results of the cumulative particle production in hA processes observed on accelerators at lower energies.

Avakian, V. V.↗
NASA NTRS1985

LPM effect and primary energy estimations

The distortion of the electron cascade development under LPM effects is now admitted; it consists of an increase of depth of showers origin, of shower maximum T sum max, a decrease of the number of particles at maximum N sub max and results in a flattening and a widening of the cascade transition curve. Connected with the influence of multiple Coulomb scattering on basic electromagnetic processes (bremsstrahlung, pair production), this effect appears at high energy with a threshold dependent on the density of the medium (more than 10 TeV for lead, more than 10 sup 6 TeV in air). Consequently, the electromagnetic components of hadron induced showers in lead and EAS in air calculated for the same hadronic cascades in the different alternative, including or not the LPM effect are examined here.

Bourdeau, M. F.↗
NASA NTRS1986

Material for Fast Cutting

New material for cutting tools increases productivity of machining processes. Material, called Iscanite (or equivalent), based on silicon nitride contains more than 90 percent silicon. Combines impact resistance close to that of coated carbides with heat and wear resistance close to those of aluminum oxide ceramics. Material used for cutting on old or new machine tools and makes it possible to exploit fully power and speed of machine.

Perez, A.↗
NASA NTRS1986

Lightweight Forms for Epoxy/Aramid Ducts

Aluminum mandrels easy to remove. Lightweight aluminum mandrel for shaping epoxy/aramid ducts simplifies and speeds production. In new process, glass-reinforced epoxy/aramid cloth wrapped on aluminum mandrel. Stainless-steel flanges and other hardware fitted on duct and held by simple tooling. Entire assembly placed in oven to cure epoxy. After curing, assembly placed in alkaline bath dissolves aluminum mandrel in about 4 hours. Epoxy/aramid shell ready for use as duct. Aluminum mandrel used to make ducts of various inside diameters up to 6 in. Standard aluminum forms used. Conventional tube-bending equipment produces requisite curves in mandrels.

Mix, E. W.↗
NASA NTRS1985

Amorphous silicon photovoltaic modules and test devices design, fabrication and testing

In July of 1984, Hughes and JPL initiated a contract for Hughes to design, fabricate and test 10 thin film Amorphous Silicon (a-Si) photovoltaic power modules. These modules were to be 1 ft x 4 ft in size. They were to be preceded by the delivery of 10 a-Si 4 in. square test devices. This effort is very timely since thin film PV development has progressed to the point where intermediate load power applications are on the horizon. It is important to know if current a-Si submodule design and manufacturing processes yield a product that is compatible with the packaging needed to meet a 20 to 30 year life span expectancy. The term submodule is assigned to an interconnected assembly of 28 a-Si cells deposited on a 1 foot square glass superstrate. These assemblies are equipped with electrical terminations, i.e., copper tabs at the four corners of the inverted submodules. It is these submodules that are to be interconnected and packaged into power modules, as opposed to the interconnected individual crystalline cells packaged into todays PV modules. A discussion of the fabrication methods and results follows.

Vanleeuwen, M.↗
NASA NTRS1986

Effects of NO3(-) and NH4(+) and urea on each other's uptake and incorporation

The purpose was to determine the optimal use by wheat plants of the N sources expected from processing biological waste products, NO3(-),NO2(-)NH4(+), and urea. The approach was to determine the uptake and metabolic products of each N source (from single and multiple component solutions), inhibitory effects of each, feedback inhibition, and overall in vivo regulation of the rates of assimilation of each by wheat plants. Previously, researchers determined the interactions of NO3(-),NO2(-),NH4(+) on each other's uptake and incorporation. The assimilation and some of its effects on NO3(-) and NH4(+) assimilation which have been completed to data are discussed.

Huffaker, R. C.↗
NASA NTRS1985

Balloon-borne observation of Aitken nuclei in the Antarctic stratosphere and troposphere

Aitken nuclei (0.002 or = r or = 0.1 microns in the atmosphere are produced through gas-to-particle conversion processes, and they grow in size by heterogeneous nucleation processes and others to produce larger aerosol particles. In the study of global background aerosol pollution, full knowledge of such aerosol processes in the clean atmosphere is essentially required. In this sense, it is important to examine the behavior of aerosols in a clean atmosphere which is not contaminated directly by aerosols and gases emitted from the Earth's surface. The Antarctic atmosphere is thought to be such a clean atmosphere. From an extensive surface observation of aerosols carried out at Syowa Station (69 deg 00'S, 39 deg 35'E) Antarctica, it has been revealed that various phenomena relating to long-range transport of trace constituents and/or photochemical processes resulting in production or growth of aerosol particles are clearly observed in Antarctica. This paper gives a preliminary report of observations made by balloon-borne Aitken nuclei sonde in 1983, at Syowa Station.

Ito, T.↗
NASA NTRS1986

Is the signal from Cyg X-3, as recorded in some underground experiments, real?

Most of the excitement concerning the underground detection of signals from Cyg X-3 comes not from astrophysical grounds, but from the contradiction with surface experimental data. Believing in the Cyg X-3 signal underground and also that the main processes of muon production are well knownm the conclusion was drawn that the signal in EAS Cherenkov or counter experiments could be remarkably high, which is not the case. Possible solutions to this discrepancy are discussed.

Chudakov, A. E.↗
NASA NTRS1985

The manifestation of Alfven's hypothesis of critical ionization velocity in the performance of MPD thrusters

The role of Alfven's critical ionization velocity in the performance of the self-field MPD thruster has been investigated. The existence of a well defined characteristic velocity can be attributed to an ionization process involving the production of a population of suprathermal electrons by an electrostatic instability. It is shown that for the MPD thruster plasma, suprathermalization of electrons via this electrostatic instability can only happen if ions are initially accelerated to velocities larger than the Alfven critical ionization velocity. When this occurs the mechanism will be initiated and the ions decelerated to velocities near the critical velocity. This mechanism ceases to be limiting when all neutrals are ionized. A model of MPD thruster terminal behavior, incorporating Alfven's hypothesis, is presented. Experiments with three different propellants reveal that operation at values of the current squared to total mass flow ratio corresponding to the Alfven critical velocity is marked by a transition wherein low frequency voltage oscillations and a notable change in the voltage-current dependence occurs. One major result of this study is the demonstration that the Alfven critical velocity is not a fundamental limitation on MPD exhaust velocity.

Choueiri, E. Y.↗