Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase retrieval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Retrieving plasmonic near-field information: A quantum-mechanical model for streaking photoelectron spectroscopy of gold nanospheres

Streaked photoemission from nanostructures is characterized by size- and material-dependent nanometer-scale variations of the induced nanoplasmonic response to the electronic field of the streaking pulse and thus holds promise of allowing photoelectron imaging with both subfemtosecond temporal and nanometer spatial resolution. In order to scrutinize the driven collective electronic dynamics in 10–200-nm-diameter gold nanospheres, we calculated the plasmonic field induced by streaking pulses in the infrared and visible spectral range and developed a quantum-mechanical model for streaked photoemission by extreme ultraviolet pulses. Overall, our simulated photoelectron spectra reveal a significant amplitude enhancement and phase shift of the photoelectron streaking trace relative to calculations that exclude the induced plasmonic field. Both are most pronounced for streaking pulses tuned to the plasmon frequency and retrace the plasmonic electromagnetic field enhancement and phase shift near the nanosphere surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Replication of engine block cylinder bridge microstructure and mechanical properties with lab scale 319 Al alloy billet castings

In recent years, aluminum alloy gasoline engine blocks have in large part successfully replaced nodular cast iron engine blocks, resulting in improved vehicle fuel efficiency. However, because of the inadequate wear resistance properties of hypoeutectic Al–Si alloys, gray iron cylinder liners are required. These liners cause the development of large tensile residual stress along the cylinder bores and necessitate the maximization of mechanical properties in this region to prevent premature engine failure. The aim of this study was to replicate the engine cylinder bridge microstructure and mechanical properties following TSR treatment (which removes the sand binder to enable easy casting retrieval) using lab scale billet castings of the same alloy composition with varying cooling rates. Comparisons in microstructure between the engine block and the billet castings were carried out using optical and scanning electron microscopy, while mechanical properties were assessed using tensile testing. The results suggest that the microstructure at the top and middle of the engine block cylinder bridge was successfully replicated by the billet castings. However, the microstructure at the bottom of the cylinder was not completely replicated due to variations in secondary phase morphology and distribution. The successful replication of engine block microstructure will enable the future optimization of heat treatment parameters. - Highlights: • A method to replicate engine block microstructure was developed. • Billet castings will allow cost effective optimization of heat treatment process. • The replication of microstructure in the cylinder region was mostly successful. • Porosity was more clustered in the billet castings compared to the engine block. • Mechanical properties were lower in billet castings due to porosity and inclusions.

36 MATERIALS SCIENCE↗

Simulating Observations of Southern Ocean Clouds and Implications for Climate

Southern Ocean (S. Ocean) clouds are important for climate prediction. Yet previous global climate models failed to accurately represent cloud phase distributions in this observation-sparse region. In this study, data from the Southern Ocean Clouds, Radiation, Aerosol, Transport Experimental Study (SOCRATES) experiment is compared to constrained simulations from a global climate model (the Community Atmosphere Model, CAM). Nudged versions of CAM are found to reproduce many of the features of detailed in situ observations, such as cloud location, cloud phase, and boundary layer structure. The simulation in CAM6 has improved its representation of S. Ocean clouds with adjustments to the ice nucleation and cloud microphysics schemes that permit more supercooled liquid. Comparisons between modeled and observed hydrometeor size distributions suggest that the modeled hydrometeor size distributions represent the dual peaked shape and form of observed distributions, which is remarkable given the scale difference between model and observations. Comparison to satellite observations of cloud physics is difficult due to model assumptions that do not match retrieval assumptions. Some biases in the model's representation of S. Ocean clouds and aerosols remain, but the detailed cloud physical parameterization provides a basis for process level improvement and direct comparisons to observations. This is crucial because cloud feedbacks and climate sensitivity are sensitive to the representation of S. Ocean clouds.

54 ENVIRONMENTAL SCIENCES↗

Satellite Analyses of Cirrus Cloud Properties During the FIRE Phase 2 Cirrus Intensive Field Observations over Kansas

The First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) Phase II Intensive Field Observations (IFO) were taken over southeastern Kansas between November 13 and December 7,1991, to determine cirrus cloud properties. The observations include in situ microphysical data; surface, aircraft, and satellite remote sensing; and measurements of divergence over meso- and smaller-scale areas using wind profilers. Satellite remote sensing of cloud characteristics is an essential aspect for understanding and predicting the role of clouds in climate variations. The objectives of the satellite cloud analysis during FIRE are to validate cloud property retrievals, develop advanced methods for extracting cloud information from satellite-measured radiances, and provide multiscale cloud data for cloud process studies and for verification of cloud generation models. This paper presents the initial results of cloud property analyses during FIRE-II using Geostationary Operational Environmental Satellite (GOES) data and NOAA Advanced Very High Resolution Radiometer (AVHRR) radiances.

Minnis, Patrick↗

The French Geological Repository Project Cigeo - 12023

The French Agency for Radioactive Waste Management, ANDRA, was launched by law in 1991 to perform and develop the research programme for managing high level and intermediate level long-lived radioactive waste generated by the French nuclear fleet. After a 15-year intensive research programme, including the study of alternative solutions, an overall review and assessment of the results was organized, including a national public debate. As a result, the Parliament passed a Planning Act on radioactive waste management in 2006. Commissioning of a geological repository by 2025 was one of the most important decisions taken at that time. To reach this goal, a license application must be submitted and reviewed by the competent authorities by 2015. A detailed review and consultation process is, as well, defined in the Planning Act. Beside the legal framework the project needs to progress on two fronts. The first one is on siting. A significant milestone was reached in 2009 with the definition of a defined area to locate the underground repository facilities. This area was approved in March 2010 by the Government, after having collected the opinions and positions of all the interested parties, at both National and local levels. A new phase of dialogue with local players began to refine the implementation scenarios of surface facilities. The final site selection will be approved after a public debate planned for 2013. The second one is the industrial organization, planning and costing. The industrial project of this geological repository was called Cigeo (Centre Industriel de Stockage Geologique). Given the amount of work to be done to comply with the given time framework, a detailed organization with well-defined milestones must be set-up. Cigeo will be a specific nuclear facility, built and operated underground for over a hundred years. The consequence of this long duration is that the development of the repository facilities will take place in successive operational phases. The characteristics of the first waste packages received will determine the work and the corresponding investments by 2025 on the repository site. One of the main challenges will be to accommodate both activities of mining and nuclear operations at the same time and at the same location. From the technical standpoint, ventilation and fire risk cannot be managed through a simple transposition from current nuclear industry practices. The reversibility demand also leads to concrete proposals with regard to repository management flexibility and waste package retrievability. These proposals contribute to the dialogue with stakeholders to prepare for the public debate and a future law which will determine the reversibility conditions. New design developments are expected to be introduced in the application from the current studies conducted until 2014. The possibility of optimization beyond 2015 will be kept open taking into account the one hundred years operating time as well as the capability to integrate feedback gained from the first construction and operation works. The industrial committed work aims to reach the application stage by 2015. The license application procedure was defined by the 2006 Act. Subject to authorization, the construction might begin in 2017. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structure and dielectric properties of Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} tungsten bronze ceramics

Highlights: ► Tetragonal tungsten bronze ceramic Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} was prepared. ► Titanium was replaced by copper in M{sub 5}RTi{sub 3}Nb{sub 7}O{sub 30} for the first time. ► Detailed structural information was retrieved by Rietveld refinement. ► An obvious relaxor-like dielectric behavior was observed in this ceramic, ion disorders in A1 and B sites contribute to this behavior. - Abstract: A new type of tungsten bronze ceramic Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} has been prepared by a conventional solid-state reaction technique. Its structural, dielectric properties were investigated. Rietveld analysis shows that Ba{sub 5}NdCu{sub 1.5}Nb{sub 8.5}O{sub 30−δ} has a single-phase tetragonal (space group P4bm and lattice constants a = b = 12.4961(4) Å, c = 3.9426(8) Å, V = 615.66(4) Å{sup 3}) tungsten bronze structure. The occupations of sites A and B are quite interesting. A1 sites are fully disordered occupied by Ba ions and Nd ions and A2 sites for Ba ions only, while B-sites are equal for both Cu and Nb ions to occupy. This material exhibits an obvious relaxation behavior in the 213–573 K temperature range. The dielectric constants have been fitted by the modified Curie–Weiss law and all the estimated γ values are close to 2, confirming the typical relaxor ferroelectric behavior. The disorders of Ba{sup 2+} or Nd{sup 3+} in A1 sites and Nb{sup 5+}, Cu{sup 2+} in B sites induced by the oxygen vacancies may contribute to this dielectric behavior.

36 MATERIALS SCIENCE↗

Cloud fields derived from satellite and surface data during FIRE cirrus phase 2

The interpretation of surface and aircraft measurements of cloud properties taken during field programs must take into account the large-scale cloud and meteorological conditions. Cloud properties are also required at scales beyond the point and line data taken from ground and aircraft platforms. Satellite data can provide a quantitative description of these large-scale cloud properties. When derived from geostationary satellite data, the cloud fields constitute a unique source for evaluating the development and demise of a cloud system. Satellites, however, can only see the tops of clouds, so that cloud layers below the uppermost cloud deck may remain undetected resulting in a incomplete depiction of the cloud system. Some multilayer clouds are amenable to detection from satellites. Many, especially in midlatitude cyclonic systems, can only be observed from the surface. A combination of surface and satellite cloud observations should be the most complete quantification of large-scale cloudiness if there are sufficient surface measurements. During the First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment Phase 2 (FIRE-2) Cirrus Intensive Field Observation (IFO) period (November 13 - December 7, 1991) conducted at Coffeyville, Kansas, cirrus observations were taken in a variety of conditions. The IFO area was selected for a variety of reasons including the relatively dense network of surface weather stations and special surface instrumentation sites. Thus, the FIRE-2 IFO presents an excellent opportunity to combine cloud observations from surface and satellite observations. This paper presents an analysis of cloud properties on a mesoscale grid using satellite cloud property retrievals, surface observer data, and rawinsonde temperature and humidity profiles.

Minnis, Patrick↗

Systems Life Cycle and Its Relation with the Triple Helix

This chapter examines the life cycle of complex systems in light of the dynamic interconnections among the university, industry and government sectors. Each sector is motivated in its resource allocation by principles discussed elsewhere in this book and yet remains complementary es-tablishing enduring and fundamental relationships. Industry and Government depend upon an educated workforce; universities depend upon industry to spark the R&D which is needed and to sponsor some basic research and much applied research. Government depends upon industry to address operational needs and provide finished products while universities offer government (along with industry) problem solving and problem solving environments. The life cycle of complex systems in this chapter will be examined in this context, providing historical examples. Current examples will then be examined within this multi-dimensional context with respect to the phases of program and project life cycle management from requirements definition through retirement and closeout of systems. During the explanation of these examples, the advances in research techniques to collect, analyze, and process the data will be examined.

and Law↗

Examining the effects of chemical cleaning, leaching, and partial dissolution on zinc and cadmium isotope fractionation in marine carbonates

The application of zinc (Zn) and cadmium (Cd) isotopes as palaeo-proxies in carbonate sediment is rapidly expanding due to their potential for tracing changes in biological productivity in the modern and past oceans. However, there are limited investigations into the chemical cleaning methods required to produce the most consistent and accurate data for these novel isotope systems. This could impact their use as palaeo-proxies to reconstruct ocean-atmosphere-climate interactions throughout Earth's history. To address this concern and expand the utility of the Zn and Cd stable isotope systems as palaeo-productivity tracers, the performance of two standard chemical cleaning protocols for acquiring robust and reliable Zn and Cd isotope datasets were assessed. These include (i) the Cd-cleaning method that uses a reductive step to selectively leach contaminating secondary iron (Fe)-manganese (Mn) (oxyhydr)oxide coatings from the carbonate surface, and an oxidative step that is used to remove post-depositional organic matter and sulphide precipitates; and (ii) the magnesium/calcium cleaning protocol that includes an oxidative step only, leaving secondary Fesingle bondMn (oxyhydr)oxide coatings largely intact. Well-preserved Holocene-, and Mesozoic-aged carbonate sediments were used to test the reliability of these two chemical cleaning methods. The Holocene samples comprised not only aliquots of bulk sediment, but also individual species of planktic and benthic foraminifera. Our results show that the best practice chemical cleaning method for retrieving consistent and accurate Zn and Cd isotope, and Zn/Ca and Cd/Ca datasets for carbonate sediments, requires both reductive and oxidative cleaning following the Cd-cleaning method. This differs from most methodological approaches applied to date that remove the reductive step from the chemical cleaning protocol and apply an oxidative step only, or no chemical cleaning at all. Inclusion of the reductive step in the chemical cleaning method typically shifts δ 66 Zn by ~0.1‰ lower and δ 114 Cd by 0.3‰ higher in the solid phase, while Zn/Ca and Cd/Ca typically decrease 2-fold. The benthic foraminifera, C. wuellerstorfi, that live in ocean bottom waters where the seawater Zn and Cd isotope composition is homogeneous display evidence of Zn and Cd isotope fractionation between seawater and carbonate on the order of 0.08 ± 0.08‰ (2SE, n = 4) and -0.25 ± 0.13‰ (2SE, n = 4), respectively, in agreement with experimental constraints. Furthermore, evidence of Zn isotope fractionation effects are recorded in a naturally-dissolved carbonate sediment, together with laboratory-controlled carbonate dissolution experiments. Based on these results, we recommend the Cd-cleaning method and the application of Zn and Cd isotope fractionation factors to accurately reconstruct past seawater Zn and Cd isotope compositions from carbonate sediments.

58 GEOSCIENCES↗

Management of the Three Mile Island, Unit 2, Accident Corium and Severely Damaged Fuel Debris

The Three Mile Island, Unit Two (TMI-2) pressurized water reactor core melted down in 1979 due to an untimely combination of maintenance problems that led to a loss of feedwater, followed by a series of operational misunderstandings and errors. The melted core recovery process required development of a wide array of tools. After approximately three years of water management and other cleanup actions, the first views of the core revealed a much higher degree of damage than previously expected. Approximately 62 metric tons of the core had melted, leaving only 42 of the 177 fuel assemblies standing with a majority of rods intact. The core to be recovered was composed of loose debris and a solidified mass of formerly molten fuel. Robotic tools that had been designed for the task were of limited effectiveness due to the range of material types and phases. Over a period of several years, the central melt was broken up, primarily by use of a core-boring drill originally designed to acquire samples through the depth of the debris field. The broken pieces were loaded into specially designed debris canisters by use of long-handled pick-and-place tools and suctioned into baffled knockout canisters using an airlift vacuum system. A remotely operable underwater plasma arc torch was developed for removal of the lower core support structure to be able to retrieve the fuel pieces and secondary melt that had accumulated on the bottom reactor vessel head. Canister design played a central role in defining the initial retrieval process and later affected transportation, interim wet and its current interim dry storage. Due to concerns about the potential for radiolysis of residual water in the debris and other canister material, the canisters were fitted with hydrogen recombiner catalyst units to prevent a buildup of flammable gas and potential pressurization. To confirm the effectiveness of the recombiners during shipping, eight dewatered canisters were kept sealed for up to 205 days with periodic sampling of the headspace gas. The highest hydrogen value (9 vol%) was observed in a canister held for 147 days while the longest stored canister resulted in a 5% hydrogen concentration. The oxygen concentration never exceeded 0.5 %, and the primary backfill was >80% argon, meaning there was no flammability risk. Radiolytic hydrogen was also observed in wet pool storage, where the vented canisters discharged a portion of the water backfill as a result of gas production. The 344 canisters (268 fuel debris, 62 filter, and 12 knockout type) were dewatered, loaded in groups of seven into a double barrier shipping cask, and transported to the U.S. Department of Energy site in Idaho for 10 years of pool storage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Shuttle Remote Manipulator System and its use in orbital operations

It is pointed out that the Shuttle Remote Manipulator System (RMS) is a key element in the Space Transportation System's ability to deploy, retrieve, and handle payloads in space. In addition, the RMS has the capability of performing other critical tasks such as inspection, construction, and satellite servicing. The present investigation is concerned with various end of arm tool concepts which could augment the RMS's capability enabling it to perform functions such as pushing/holding (applying pressure), prying, clamping (nonimpulse release) and shearing. Attention is also given to a tool for satellite servicing, a method for augmenting the operator's 'feel' for the job by force/moment sensing, and a possible four phase program for implementation of the tool system. A description is given of the key elements of RMS flight testing carried out to date.

Sachdev, S. S.↗

Identification of Stratospheric Waves in Ozone in the Tropics from OMI High Spectral Resolution Measurements

Previous studies using Total Ozone Mapping Spectrometer (TOMS) measurements have identified several types of tropical waves in the stratosphere. These waves include Kelvin waves, mixed Rossby-gravity waves, equatorial Rossby waves, and global normal modes. All of these detected waves occur when their zonal phase speeds are opposite the zonal winds in the low-mid stratosphere associated with the Quasi-biennial Oscillation (QBO). Peak-to-peak amplitudes in all cases are typically 5 DU. While total ozone data from TOMS is sensitive in detecting these tropical waves, they provide each day only a single horizontal cross-sectional map. The high spatial and spectral resolution of the Aura Ozone Monitoring Instrument (OMI) provides a unique means to evaluate 3D structure in these waves including their propagation characteristics. Ozone profiles retrieved from OMI radiances for wavelengths 270-310 nm are utilized to examine the nature of these wave disturbances extending from the lower to upper stratosphere.

Ziemke, J. R.↗

NASA Pilot-Engaged Expert Response Using IBM Watson Technology: Prototype Evaluation of Knowledge Retrieval System

NASA Langley Research Center and IBM have been investigating the use of IBM Watson technology in aerospace research and development. One application of Watson technology is the Pilot-Engaged Expert Response (PEER) use case. The PEER system is envisioned as an in-cockpit advisor that will act as a source of situationally-relevant information for pilots and other flight crew members to assist in decision making about real-time events and situations that arise in the course of aircraft operations. PEER will make available vast stores of knowledge and information quickly and directly, putting important informational resources where they are needed most. IBM has worked with NASA to develop an architecture and articulate a roadmap for the development of the PEER system. That vision is built around Watson Discovery Advisor (WDA) software solution, derived from IBM's Jeopardy!-winning automatic question answering system. PEER makes use of WDA's sophisticated question-answering capabilities as its core, adding important User Interface components and other customizations for the cockpit environment, including communication with flight systems and other external data sources. The development plan for PEER includes four development stages, with the current project constituting the first phase. In this project, a prototype instance of PEER was successfully adapted to the aviation domain, enabling users to ask questions about aviation topics and receive useful and accurate answers to these questions. Major tasks accomplished include the development of procedures for domain adaptation through automatic lexicon extraction from domain glossaries; generation of question-answer training data which was used to train the system; and assessment of the effectiveness of domain adaptation, which showed a dramatic improvement in the ability of the PEER system to answer domain-relevant questions. In addition, the vision for the PEER system was pushed forward by the articulation of a plan for the automatic enhancement of question-answering with contextual information. This initial phase focused on two main goals: 1) the targeted domain adaptation of the underlying WDA system to the aviation domain; and, 2) the design of the software systems needed to leverage flight-contextual data. Domain adaptation of the WDA system proceeds via three main activities: Domain data ingestion, lexical customization and model training. A textual corpus consisting of 1,147 individual documents with more than 7.5 million words of text was ingested into the system and this served as the basis of all further development. A domain lexicon of over 3,500 aviation-domain terms was semi-automatically generated from domain documents and used to train the system. In addition, a set of over 500 question-answer (QA) pairs relevant to the PEER use case was developed; these were used to train and assess the system. These important first steps established the basis for the PEER system. In addition, steps were taken towards the integration of the PEER system into the cockpit environment with the development of a functional design for the Contextual Data Augmentation (CDA) subsystem. This subsystem brings to bear contextual data to improve system responses. It has three main submodules: the Contextual Data Collection module, the Contextual Data Selection module, and the Contextual QA Augmentation module. These modules form a processing pipeline that addresses the problems associated with automatically integrating information from external resources into the knowledge-retrieval mechanism.

Machine learning↗

Comparing Satellite- and Ground-Based Observations of Cloud Occurrence Over High Southern Latitudes

The 2B-CLDCLASS-LIDAR R05 (2BCL5) and the raDAR/liDAR (DARDAR) satellite retrievals of cloud occurrence are compared as a function of altitude and latitude. The largest disparities are observed at low altitudes over high southern latitudes. These data sets are cross referenced to ground-based measurements from the Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment (AWARE) campaign at McMurdo Station, Antarctica. Compared with AWARE observations, both 2BCL5 and DARDAR underestimate cloud occurrence below 1.5 km, with 2BCL5 and DARDAR distinguishing roughly one third of cloud occurrences observed by AWARE at 0.5 km. While DARDAR identifies greater cloud occurrences than 2BCL5 below 1.5 km, cloud occurrence values for the two data sets have similar differences relative to ground-based measurements. Therefore, the DARDAR retrievals of greater cloud occurrence at low altitudes are likely due to a larger quantity of false positives associated with radar ground clutter or attenuated lidar retrievals. DARDAR cloud occurrences match better with AWARE than 2BCL5 above 5 km. However, the likely underestimation of ground-based measurements at higher altitudes suggests DARDAR may underestimate high level cloud occurrence. Finally, both data sets indicate the presence of liquid containing clouds at temperatures within the homogeneous freezing regime, despite the fact that the ECMWF-AUX data set implemented in their processing clearly indicates temperatures below -38°C. Finally, using AWARE radiosonde (ECMWF-AUX) temperature data, we find that 2BCL5 detects 13.3% (13.8%) of mixed phase clouds below -38°C, while DARDAR detects 5.7% (6.6%) of mixed phase and 1.1% (1.3%) of liquid phase clouds below -38°C.

54 ENVIRONMENTAL SCIENCES↗

Extracting the phase of high-order harmonic emission from a molecule using transient alignment in mixed samples

We report measurements of both the phase and intensity of high-order harmonic emission from aligned CO{sub 2} molecules, using a mixture of a molecular and an atomic gas. The molecules are transiently aligned using an ultrashort pulse, and a subsequent stronger pulse is used to generate high-order harmonics from a mixed Kr/CO{sub 2} sample. The high-order harmonic emission from the molecules interferes with the reference emission from the atoms. By monitoring the change in harmonic emission as a function of gas mixture and molecular alignment, we can retrieve the orientational dipole that has general features consistent with a two-center emission model.

74 ATOMIC AND MOLECULAR PHYSICS↗

MODIS Retrieval of Dust Aerosol

The MODerate resolution Imaging Spectroradiometer (MODIS) currently aboard both the Terra and Aqua satellites produces a suite of products designed to characterize global aerosol distribution, optical thickness and particle size. Never before has a space-borne instrument been able to provide such detailed information, operationally, on a nearly global basis every day. The three years of Terra-MODIS data have been validated by comparing with co-located AERONET observations of aerosol optical thickness and derivations of aerosol size parameters. Some 8000 comparison points located at 133 AERONET sites around the globe show that the MODIS aerosol optical thickness retrievals are accurate to within the pre-launch expectations. However, the validation in regions dominated by desert dust is less accurate than in regions dominated by fine mode aerosol or background marine sea salt. The discrepancy is most apparent in retrievals of aerosol size parameters over ocean. In dust situations, the MODIS algorithm tends to under predict particle size because the reflectances at top of atmosphere measured by MODIS exhibit the stronger spectral signature expected by smaller particles. This pattern is consistent with the angular and spectral signature of non-spherical particles. All possible aerosol models in the MODIS Look-Up Tables were constructed from Mie theory, assuming a spherical shape. Using a combination of MODIS and AERONET observations, in regimes dominated by desert dust, we construct phase functions, empirically, with no assumption of particle shape. These new phase functions are introduced into the MODIS algorithm, in lieu of the original options for large dust-like particles. The results will be analyzed and examined.

Remer, Lorraine A.↗

Remote Sensing of Cloud Top Heights Using the Research Scanning Polarimeter

Clouds cover roughly two thirds of the globe and act as an important regulator of Earth's radiation budget. Of these, multilayered clouds occur about half of the time and are predominantly two-layered. Changes in cloud top height (CTH) have been predicted by models to have a globally averaged positive feedback, however observational changes in CTH have shown uncertain results. Additional CTH observations are necessary to better and quantify the effect. Improved CTH observations will also allow for improved sub-grid parameterizations in large-scale models and accurate CTH information is important when studying variations in freezing point and cloud microphysics. NASA's airborne Research Scanning Polarimeter (RSP) is able to measure cloud top height using a novel multi-angular contrast approach. RSP scans along the aircraft track and obtains measurements at 152 viewing angles at any aircraft location. The approach presented here aggregates measurements from multiple scans to a single location at cloud altitude using a correlation function designed to identify the location-distinct features in each scan. During NASAs SEAC4RS air campaign, the RSP was mounted on the ER-2 aircraft along with the Cloud Physics Lidar (CPL), which made simultaneous measurements of CTH. The RSPs unique method of determining CTH is presented. The capabilities of using single and combinations of channels within the approach are investigated. A detailed comparison of RSP retrieved CTHs with those of CPL reveal the accuracy of the approach. Results indicate a strong ability for the RSP to accurately identify cloud heights. Interestingly, the analysis reveals an ability for the approach to identify multiple cloud layers in a single scene and estimate the CTH of each layer. Capabilities and limitations of identifying single and multiple cloud layers heights are explored. Special focus is given to sources of error in the method including optically thin clouds, physically thick clouds, multi-layered clouds as well as cloud phase. When determining multi-layered CTHs, limits on the upper clouds opacity are assessed.

Cloud height indicators↗

Real-time sparse-sampled Ptychographic imaging through deep neural networks

Ptychography has rapidly grown in the fields of X-ray and electron imaging for its unprecedented ability to achieve nano or atomic scale resolution while simultaneously retrieving chemical or magnetic information from a sample. A ptychographic reconstruction is achieved by means of solving a complex inverse problem that imposes constraints both on the acquisition and on the analysis of the data, which typically precludes real-time imaging due to computational cost involved in solving this inverse problem. In this work we propose PtychoNN, a novel approach to solve the ptychography reconstruction problem based on deep convolutional neural networks. We demonstrate how the proposed method can be used to predict real-space structure and phase at each scan point solely from the corresponding far-field diffraction data. The presented results demonstrate how PtychoNN can effectively be used on experimental data, being able to generate high quality reconstructions of a sample up to hundreds of times faster than state-of-the-art ptychography reconstruction solutions once trained. By surpassing the typical constraints of iterative model-based methods, we can significantly relax the data acquisition sampling conditions and produce equally satisfactory reconstructions. Besides drastically accelerating acquisition and analysis, this capability can enable new imaging scenarios that were not possible before, in cases of dose sensitive, dynamic and extremely voluminous samples.

Cherukara, Mathew J↗