Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parabolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Shaped Beam KU-Band Antenna Design

Antenna systems for a Ku-band synchronous orbit communications satellite were considered. A multiple beam offset feed cluster used in conjunction with an offset parabolic reflector was chosen for the antenna realization. For radiating elements in the feed array, polyrod or dielectric rod radiators fed by waveguide are investigated. Polyrod antennas shrink the cross section of the waveguide required, are fairly directive, and can be tapered to reduce sidelobes. As a consequence, it is thought that mutual coupling effects between adjacent elements will be minimal and the resultant physically small elements will allow greater packing densities for the drive elements in the feed array than would otherwise be possible.

Dudgeon, J. E.↗

Cavitation in liquid cryogens. 2: Hydrofoil

Boundary layer principles, along with two-phase concepts, are used to improve existing correlative theory for developed cavity data. Details concerning cavity instrumentation, data analysis, correlative techniques, and experimental and theoretical aspects of a cavitating hydrofoil are given. Both desinent and thermodynamic data, using liquid hydrogen and liquid nitrogen, are reported. The thermodynamic data indicated that stable thermodynamic equilibrium exists throughout the vaporous cryogen cavities. The improved correlative formulas were used to evaluate these data. A new correlating parameter based on consideration of mass limiting two-phase flow flux across the cavity interface, is proposed. This correlating parameter appears attractive for future correlative and predictive applications. Agreement between theory and experiment is discussed, and directions for future analysis are suggested. The front half of the cavities, developed on the hydrofoil, may be considered as parabolically shaped.

Hord, J.↗

Plural beam antenna

An antenna capable of deriving several beams about a single boresight axis including a focusing means, such as a parabolic reflector or a lens is described. Plural arrays, each including plural radially aligned antenna elements extending from the boresight axis, are located in proximity to a focal point for the focusing means. The elements of the plural arrays are independently excited as each of the arrays is independently rotated about the boresignt axis.

Keller, G. C.↗

Radar/radiometer facilities for precipitation measurements

The OSU ElectroScience Laboratory Radar/Radiometer Facilities are described. This instrumentation includes a high-resolution radar/radiometer system, a fully automated low-resolution radar system, and a small surveillance radar system. The high-resolution radar/radiometer system operates at 3, 9, and 15 GHz using two 9.1 m and one 4.6 m parabolic antennas, respectively. The low-resolution and surveillance radars operate at 9 and 15 GHz, respectively. Both the high- and low-resolution systems are interfaced to real-time digital processing and recording systems. This capability was developed for the measurement of the temporal and spatial characteristics of precipitation in conjunction with millimeter wavelength propagation studies utilizing the Advanced Technology Satellites. Precipitation characteristics derived from these measurements could also be of direct benefit in such diverse areas as: the atmospheric sciences, meteorology, water resources, flood control and warning, severe storm warning, agricultural crop studies, and urban and regional planning.

Hodge, D. B.↗

Millimeter wave experiment for ATS-F

A detailed description of spaceborne equipment is provided. The equipment consists of two transmitters radiating signals at 20 and 30 GHz from either U.S. coverage horn antennas or a narrow beam parabolic antenna. Three modes of operation are provided: a continuous wave mode, a multitone mode in which nine spectral lines having 180 MHz separation and spaced symmetrically about each carrier, and a communications mode in which communications signals from the main spacecraft transponder are modulated on the two carriers. Detailed performance attained in the flight/prototype model of the equipment is presented both under laboratory conditions and under environmental extremes. Provisions made for ensuring reliability in space operation are described. Also described the bench test equipment developed for use with the experiment, and a summary of the new technology is included.

Green, J. S.↗

Composite antenna feed

A composite antenna feed subsystem concentrated in a small area at the prime focus of the parabola of a satellite parabolic reflector accomodates a plurality of frequency bands. The arrays comprising the subsystem are mounted on the top cover of a communication module. A multimode horn is arranged at the center of the subsystem axis which functions at X- And C-band frequencies, and a cross array consisting of individual elements form the S-band feed, with one arm of the S-band array containing an element mutually shared with the L-band array. Provision is also made for UHF frequencies, and a dipole arrangement for VHF frequencies is arranged around the S-band arms.

Jakstys, V. J.↗

Crack shapes and stress intensity factors for edge-cracked specimens.

A simple stress intensity factor expression is given for a deep edge crack in a plate in tension. The shapes of cracks opened by tension or bending are approximated by conic sections, and the conic section coefficients are related to plate geometry by very simple empirical equations. The magnitude of the crack displacement is a function of applied load, plate geometry, and the elastic constants of the plate material. The shape of a loaded crack in a semiinfinite plate is, approximately, a portion of an ellipse whose semimajor axis is about three times the crack length. As the crack length (relative to the plate width) increases, the crack shape becomes parabolic, then hyperbolic, the acuity of the hyperbola increasing with the relative crack length.

Orange, T. W.↗

Galactic bridges and tails.

This paper argues that the bridges and tails seen in some multiple galaxies are just tidal relics of close encounters. These consequences of the brief but violent tidal forces are here studied in a deliberately simple-minded fashion. Each encounter is considered to involve only two galaxies and to be roughly parabolic; each galaxy is idealized as just a disk of noninteracting test particles which initially orbit a central mass point. As shown here, the two-sided distortions provoked by gravity alone in such circumstances can indeed evolve kinematically into some remarkably narrow and elongated features. Besides extensive pictorial survey of tidal damage, this paper offers reconstructions of the orbits and outer shapes of four specific interacting pairs: Arp 295, M51 + NGC 5195, NGC 4676, and NGC 4038/9.

Toomre, A.↗

Solution of the stochastic control problem in unbounded domains.

Bellman's dynamic programming equation for the optimal index and control law for stochastic control problems is a parabolic or elliptic partial differential equation frequently defined in an unbounded domain. Existing methods of solution require bounded domain approximations, the application of singular perturbation techniques or Monte Carlo simulation procedures. In this paper, using the fact that Poisson impulse noise tends to a Gaussian process under certain limiting conditions, a method which achieves an arbitrarily good approximate solution to the stochastic control problem is given. The method uses the two iterative techniques of successive approximation and quasi-linearization and is inherently more efficient than existing methods of solution.

Robinson, P.↗

Nonlinear problem of a shock-tube interaction-region boundary layer.

Description of a numerical method that dispenses with the recourse to linearization or 'momentum-integral-correction' schemes in solving nonlinear problems of boundary layer flow in the interaction region of a shock tube or of similar singular parabolic problems of shock-induced unsteady boundary layers. The accuracy of the numerical results obtainable is shown to be satisfactory.

Gupta, R. N.↗

Far-infrared observations of celestial objects by balloon-borne telescope.

The instrument described is an f/5 Newtonian telescope with a parabolic pyrex primary mirror. The telescope tube is 1.5 m long. A 61 cm baffle is included to provide shielding from off-axis objects such as the earth, the moon, and the sun. An outline of the regions covered by sky surveys in June 1970 and in April 1971 is presented. Approximately 750 square degrees of the sky have been covered, including 100 degrees along the galactic plane.

Hoffmann, W. F.↗

Astigmatism in reflector antennas.

Astigmatic phase error in large parabolic reflector antennas is discussed. A procedure for focusing an antenna and diagnosing the presence and degree of astigmatism is described. Theoretical analysis is conducted to determine the nature of this error in such antennas.

Cogdell, J. R.↗

Altered susceptibility to motion sickness as a function of subgravity level.

Large interindividual differences among 74 normal subjects in the change in susceptibility to motion sickness with effective lifting of the normal g-load by parabolic flight maneuvers were recorded with high test-retest reliability. Most subjects, who were required to make standardized head movements while seated in a chair rotating at a constant speed, demonstrated either a substantial increase or a decrease in susceptibility, in confirmation of a previous study, while a few appeared to be more or less unaffected by the 1 g to 0 g gravitational change. A similar test procedure conducted with eighteen of the subjects at lunar- and Martian-gravity levels revealed further interindividual differences in susceptibility as a function of g-level.

Miller, E. F., II↗

Effect of shear on duct wall impedance.

The solution to the equation governing the propagation of sound in a uniform shear layer is expressed in terms of parabolic cylinder functions. This result is used to develop a closed-form solution for acoustic wall impedance which accounts for both the duct liner and the presence of a boundary layer in the duct. The effective wall impedance can then be used as the boundary condition for the much simpler problem of sound propagation in uniform flow.

Goldstein, M.↗

Orientation-dependent effects in Oort's theory of comet origin. II - Anisotropies in the distribution of long-period comet orbits.

The statistical significance of anisotropies in the distribution of orbital orientations among the long-period and nearly parabolic comets is evaluated. It is suggested that these anisotropies are not the result of observational selection effects. A numerical model for the distribution of orbital orientations is constructed, based on Oort's theory of comet origin and the assumption that the observed anisotropies are caused by multiple planetary perturbations over the course of many perihelion passages. The model, which is restricted to comets with perihelion distances less than 0.3 AU, does not predict any significant anisotropies.

Joss, P. C.↗

Bidirectional zoom antenna

Antenna comprises two parabolic cylinders placed orthogoanlly to each other. One cylinder serves as main reflector, and the other as subreflector. Cylinders have telescoping sections to vary antenna beamwidth. Beamwidth can be adjusted in elevation, azimuth, or both. Design has no restriction as to choice of polarization.

Schmidt, R. F.↗

Research on the sonic boom problem. Part 2: Flow field measurement in wind tunnel and calculation of second order F-function

An experimental investigation has been carried out in a wind tunnel to test some of the results of Landahl's second order theory. The slender models consisted of a parabolic spindle, tested at M = 3, and a wing body configuration, suggested by Ferri, and tested at M = 2.7. The theory indicates that shock position and strength at an arbitrary distance can be calculated by means of near field measurements. The results show that this method is an appropriate one for simple bodies and for bodies with complicated geometries as well.

Landahl, M.↗

The requirement for designing analyzable space deployable structures

The applied technology satellite parabolic reflector subsystem is one of the first systems designed for space environment with limited terrestrial environmental ability. As a result, the complete performance of the system could not be demonstrated in a terrestrial environment without unacceptable design compromises. This problem was circumvented by developing a test philosophy which relied heavily on analysis to qualify and accept the flight hardware. The test program was successfully concluded and an optimized, low cost structure resulted. It is felt that this test and analysis philosophy can be applied to future space systems, resulting in substantial cost and schedule savings and a mission optimized system.

Woods, A. A., Jr.↗