Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Effect of order in self-assembled monolayers on the orientation of poly(3-hexylthiophene) crystallites

Molecular dynamics simulations are used to study the influence of the molecular properties of chemically functionalized substrates on the orientation of poly(3-hexylthiophene) (P3HT) crystallites. The effects of alkyl-trichlorosilane self-assembled monolayer packing density, packing order, and end-group functionality are independently, and parametrically investigated. From these simulations, the potential energy surface presented by the substrate to the P3HT molecules is determined to be the main driver of P3HT ordering. Disordered substrates with a smoothly varying potential energy landscape are found to encourage ideal edge-on P3HT orientation for thin-film transistor applications; highly ordered substrates with undesirable periodic potential energy wells are found to trap a fraction of P3HT side chains out of their natural geometry and hence disrupt favorable ordering.

36 MATERIALS SCIENCE↗

Molecular dynamics simulations of water confined between matched pairs of hydrophobic and hydrophilic self-assembled monolayers.

We have conducted a molecular dynamics (MD) simulation study of water confined between methyl-terminated and carboxyl-terminated alkylsilane self-assembled monolayers (SAMs) on amorphous silica substrates. In doing so, we have investigated the dynamic and structural behavior of the water molecules when compressed to loads ranging from 20 to 950 MPa for two different amounts of water (27 and 58 water molecules/nm{sup 2}). Within the studied range of loads, we observe that no water molecules penetrate the hydrophobic region of the carboxyl-terminated SAMs. However, we observe that at loads larger than 150 MPa water molecules penetrate the methyl-terminated SAMs and form hydrogen-bonded chains that connect to the bulk water. The diffusion coefficient of the water molecules decreases as the water film becomes thinner and pressure increases. When compared to bulk diffusion coefficients of water molecules at the various loads, we found that the diffusion coefficients for the systems with 27 water molecules/nm{sup 2} are reduced by a factor of 20 at low loads and by a factor of 40 at high loads, while the diffusion coefficients for the systems with 58 water molecules/nm{sup 2} are reduced by a factor of 25 at all loads.

99 GENERAL AND MISCELLANEOUS↗

The origin of Monochromatic Photoemission Peak in Diamondod Monolayer

Recent photoemission experiments have discovered a highly monochromatized secondary electron peak emitted from diamondoid self-assembled monolayers on metal substrates. New experimental data and simulation results are presented to show that a combination of negative electron affinity and strong electron-phonon scattering is responsible for this behavior. The simulation results are generated using a simple Monte Carlo transport algorithm. The simulated spectra recreate the main spectral features of the measured ones.

36 MATERIALS SCIENCE↗

Physical and monolayer film properties of potential fatty ester biolubricants

The desire to replace petroleum-based lubricants with alternatives that are environmentally friendly and made from sustainable sources has encouraged the development of biolubricants based on vegetable oils. To be good lubricants, the materials should have low melting points, appropriate viscosity and oxidative stability. In this paper, we report the melting point and viscosity of oleate esters of ethylene glycol, 1,2-propanediol, 2,3-butanediol, and pentaerythritol as well as the decanoate esters of 2,3-butanediol and the 12-methyltetradecanoate esters of 1,2-propanediol. Polyol esters that have a free hydroxy group had lower melting points than the completely esterified polyols, but the completely esterified polyol esters exhibited less change in viscosity with temperature than those having a free hydroxy group. 2, 3-Butanediol monooleate, which melted at -48.6°C shows promise as a biolubricant, but its viscosity index was estimated to be 100. Pentaerythritol oleate esters, with melting points below -10°C and viscosity indices in the range of 170–197, may be suitable candidates as biolubricants. The behavior of esters spread as a monomolecular film at air/water interface may provide insight into the way they behave when spread on metal or polar surfaces, so the pressure-area isotherms of 2,3-butanediol monoleate and selected esters are also reported.

2,3-Butanediol monooleate↗

Hole Transfer to Carbazole Derivatives: Untold Story of “Self-Assembled Monolayers” Employed in “Halide Perovskite Solar Cells”

Carbazole derivatives, such as MeO-2PACz and 2PACz are known to improve the performance of halide perovskite solar cells by facilitating hole transfer. To assess their interaction with halide perovskites, this work probes the hole transfer from excited CsPbBr3 quantum dots to MeO-2PACz and 2PACz using emission spectroscopic and transient absorption techniques. The different oxidation potentials of these two carbazoles result in divergent interactions with CsPbBr 3 QDs. Whereas MeO-2PACz quenches the emission of CsPbBr 3 QDs, 2PACz enhances the emission by remediating the surface traps. Transient absorption studies confirm the formation of MeO-2PACz +• cation radical with characteristic absorption in the near IR region. No such oxidation process was observed with 2PACz. The mechanistic insights into the interaction of the two carbazole derivatives with excited perovskite nanocrystals will add another piece to the untold story behind the improved performance of perovskite photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defects Engineered Monolayer MoS 2 for Improved Hydrogen Evolution Reaction

MoS 2 is a promising, low-cost material for electrochemical hydrogen production due to its high activity and stability during the reaction. Our work represents an easy method to increase the hydrogen production in electrochemical reaction of MoS 2 via defect engineering, and helps to understand the catalytic properties of MoS 2 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gram-Scale Synthesized Pd2Co-Supported PtMonolayers Electrocatalysts for Oxygen Reduction Reaction

Gram-scale synthesis of Pt{sub ML} electrocatalysts with a well-defined core-shell structure has been carried out using method involving galvanic displacement of an underpotential deposition Cu layer. The Pt shell thickness can be controlled by stepwise deposition. The Pt{at}Pd{sub 2}Co/C nanoparticles were characterized by X-ray powder diffraction, aberration-corrected scanning transmission electron microscopy, high-resolution energy-loss spectrometry, and in situ X-ray absorption spectroscopy. A complete Pt shell of 0.6 nm on a Pd{sub 2}Co core has been confirmed. The Pt{at}Pd{sub 2}Co/C core-shell electrocatalysts showed a very high activity for the oxygen reduction reaction; the Pt mass and specific activity were 0.72 A mg{sup -1}{sub Pt} and 0.5 mA cm{sup -2}, respectively (3.5 and 2.5 times higher than the corresponding values for commercial Pt catalysts), at 0.9 V in 0.1 M HClO{sub 4} at room temperature. In an accelerated potential cycling test, a loss in active surface area and a decrease in catalytic activity for gram-scale-synthesized Pt{sub ML} catalysts were also determined.

30 DIRECT ENERGY CONVERSION↗