Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “measurement errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Comparisons of SiO maser and long-period variable positions in the R Aquarii and Omicron Ceti binary systems

It has been determined that the absolute position of the centroid of SiO maser-emitting spots toward both R Aqr and Omicron Cet are coincident with the position of the long-period variables (LPVs) in these binary systems to within the errors of measurement. The SiO positions were determined with the Hat Creek interferometer, while the LPV positions were determined with the 8-in transit circle of the US Naval Observatory. These results contradict an earlier report of a circumbinary SiO maser far removed from the LPV in the R Aqr binary system; statistical reasons for the discrepancy are suggested. High-resolution spectra of both sources are presented and possible models are discussed.

Hollis, J. M.↗
NASA NTRS1990

Frequency noise measurement of diode-pumped Nd:YAG ring lasers

The combined frequency noise spectrum of two model 120-01A nonplanar ring oscillator lasers was measured by first heterodyne detecting the IF signal and then measuring the IF frequency noise using an RF frequency discriminator. The results indicated the presence of a 1/f-squared noise component in the power-spectral density of the frequency fluctuations between 1 Hz and 1 kHz. After incorporating this 1/f-squared into the analysis of the optical phase tracking loop, the measured phase error variance closely matches the theoretical predictions.

Chen, Chien-Chung↗
NASA NTRS1990

Dynamical reference frames in the planetary and earth-moon systems

Estimates of the accuracies of the ephemerides are reviewed using data for planetary and lunar systems to determine the efficacy of the inherent dynamical reference frame. The varied observational data are listed and given with special attention given to ephemeris improvements. The importance of ranging data is discussed with respect to the inner four planets and the moon, and the discrepancy of 1 arcsec/century between mean motions determined by optical observations versus ranging data is addressed. The Viking mission data provide inertial mean motions for the earth and Mars of 0.003 arcsec/century which will deteriorate to 0.01 arcsec after about 10 years. Uncertainties for other planets and the moon are found to correspond to approximately the same level of degradation. In general the data measurements and error estimates are improving the ephemerides, although refitting the data cannot account for changes in mean motion.

Standish, E. M.↗
NASA NTRS1991

The control network of Mercury: April 1991

Features identified on Mariner 10 high resolution images of Mercury, acquired during three flybys between 1974 and 1975, form the basis of Mercury's planetwide control network. Although images from all three flybys are used in the net, the large amount of contiguous coverage from the second flyby, a southern bright-side pass, make these images the strongest contributors to the control net. Mercury is in synchronous rotation with a period of 58.6462 days and its spin axis is approximately normal to the equatorial plane. The 20 degree meridian is defined by the crater Hun Kal, located just south of the equator. The control network computations involve the photogrammetric determination of control point coordinates and an analytical triangulation solution. The current control network computations for Mercury are performed in the J2000 coordinate system according to the International Astronomical Union (IAU) convention. In recent years, updates to the control network have included improved trajectory solutions and modification of the standard radii (2439) at several points based on Earth-based radar altimetry data. The current status of the control network calculations is presented. Improvements were made to existing control points and new control points were added to the net to strengthen the overall network and improve the standard error of measurement.

Davies, Merton E.↗
NASA NTRS1991

A software control system for the ACTS high-burst-rate link evaluation terminal

Control and performance monitoring of NASA's High Burst Rate Link Evaluation Terminal (HBR-LET) is accomplished by using several software control modules. Different software modules are responsible for controlling remote radio frequency (RF) instrumentation, supporting communication between a host and a remote computer, controlling the output power of the Link Evaluation Terminal and data display. Remote commanding of microwave RF instrumentation and the LET digital ground terminal allows computer control of various experiments, including bit error rate measurements. Computer communication allows system operators to transmit and receive from the Advanced Communications Technology Satellite (ACTS). Finally, the output power control software dynamically controls the uplink output power of the terminal to compensate for signal loss due to rain fade. Included is a discussion of each software module and its applications.

Reinhart, Richard C.↗
NASA NTRS1992

A new solar irradiance calibration from 3295 A to 8500 A derived from absolute spectrophotometry of Vega

By imaging sunlight diffracted by 20- and 30-micron diameter pinholes onto the entrance aperture of a photoelectric grating scanner, the solar spectral irradiance was determined relative to the spectrophotometric standard star Vega, observed at night with the same instrument. Solar irradiances are tabulated at 4 A increments from 3295 A to 8500 A. Over most of the visible spectrum, the internal error of measurement is less than 2 percent. This calibration is compared with earlier irradiance measurements by Neckel and Labs (1984) and by Arvesen et al. (1969) and with the high-resolution solar atlas by Kurucz et al. The three calibrations agree well in visible light but differ by as much as 10 percent in the ultraviolet.

Lockwood, G. W.↗
NASA NTRS1992

Aerocapture and aeromaneuvering at Mars

This paper presents the results of a guidance analysis study for aerocapture and aeromaneuvering at Mars. A 4-state, near-optimal, hybrid guidance algorithm is derived for applications throughout the paper. It is based on the critical assumption that Loh's function remains constant between successive guidance updates. Besides the guidance algorithm, the paper presents a performance evaluation of guidance derived from estimated or 'navigated' spacecraft state, provided by an onboard navigation subsystem for real-time applications on Mars. For the performance evaluation, the spacecraft state is augmented by such parameters as the reference atmospheric density and scale-height, the banking angle and angle of attack for spacecraft control and the accelerometer measurement model errors. Finally, the paper examines also, the influence of random uncertainties in atmospheric density on aeroassisted maneuvers, by a Monte Carlo type of simulation.

Vijayaraghavan, A.↗
NASA NTRS1993

The signature of the cosmological redshift in population studies of gamma-ray burst spectra

The slope of a gamma-ray burst spectrum determines how the burst flux decreases as the cosmological redshift z increases. This provides a test for the presence of a cosmological redshift in a sample of gamma-ray bursts. Many bursts have spectra characterized by a frequency-dependent power-law index, so a burst subset can be created by requiring that each subset member have a power-law index of the given value at a low frequency and an index of a different given value at a high frequency. If all bursts in this subset are at z much less than 0.1, then the flux at low frequency will change proportionally with the flux at high frequency. If, however, z greater than 0.1 for most bursts, then the linear dependence of the high-frequency flux on the low-frequency flux disappears at the flux characterizing the spatial cutoff in the log N-log C(max)/C(min) diagram. This signature of the cosmological redshift generally persists when gamma-ray bursts are given a broad distribution of intrinsic fluxes and spectral shapes. The characteristics that a burst distribution must have to mask the cosmological redshift are discussed. The limitations of this test are observational, arising primarily from errors in measuring the photon flux and in determining the spectral index of the burst spectrum.

Brainerd, J. J.↗
NASA NTRS1985

Spatial spectra from a satellite scanning radiometer

A method for computing spatial spectra from measurement based on a scanning radiometer is presented which takes into account the instrument field-of-view, time response, and the scan pattern. To compute the mean of the field, measurements away from nadir are weighted more heavily than those near nadir. The proposed method is capable of defining the limits beyond which the Fourier components cannot be extracted from the data. Results show that, for the Earth Radiation Budget Experiment scanning radiometer at an altitude of 600 km, spectral features with wavelengths greater than 100 km can be measured without errors due to incorporation of unobservable portions of the spectrum into results.

Smith, G. L.↗
NASA NTRS1994

Advanced technology for a satellite multichannel demultiplexer/demodulator

Satellite on-board processing is needed to efficiently service multiple users while at the same time minimizing earth station complexity. The processing satellite receives a wideband uplink at 30 GHz and down-converts it to a suitable intermediate frequency. A multichannel demultiplexer then separates the composite signal into discrete channels. Each channel is then demodulated by bulk demodulators, with the baseband signals routed to the downlink processor for retransmission to the receiving earth stations. This type of processing circumvents many of the difficulties associated with traditional bent-pipe repeater satellites. Uplink signal distortion and interference are not retransmitted on the downlink. Downlink power can be allocated in accordance with user needs, independent of uplink transmissions. This allows the uplink users to employ different data rates as well as different modulation and coding schemes. In addition, all downlink users have a common frequency standard and symbol clock on the satellite, which is useful for network synchronization in time division multiple access schemes. The purpose of this program is to demonstrate the concept of an optically implemented multichannel demultiplexer (MCD). A proof-of-concept (POC) model has been developed which has the ability to receive a 40 MHz wide composite signal consisting of up to 1000 40 kHz QPSK modulated channels and perform the demultiplexing process. In addition a set of special test equipment (STE) has been configured to evaluate the performance of the POC model. The optical MCD is realized as an acousto-optic spectrum analyzer utilizing the capability of Bragg cells to perform the required channelization. These Bragg cells receive an optical input from a laser source and an RF input (the signal). The Bragg interaction causes optical output diffractions at angles proportional to the RF input frequency. These discrete diffractions are optically detected and output to individual demodulators for baseband conversion. Optimization of the MCD design was conducted in order to achieve a compromise between two opposing sources of signal degradation: adjacent channel interference and intersymbol interference. The system was also optimized to allow simple, inexpensive ground stations communications with the MCD. These design goals led to the realization of a POC MCD which demonstrates the demultiplexing function with minimal signal degradation. Performance evaluation results using the STE equipment indicate that the dynamic range of the demultiplexer in the presence of adjacent and multiple channel loading is 40 - 50 dB. Measured bit error rate (BER) probabilities varied from the predicted theoretical results by one dB or less. The performance of the proof-of-concept model indicate that the development of a space qualified optically implemented MCD are feasible. The advantages to such an implementation include reduced size, weight and power and increased reliability when compared with electronic approaches. All of these factors are critical to on-board satellite processors. Further optimization can be conducted which trade ground station complexity and MCD performance to achieve desired system results.

Abramovitz, Irwin J.↗
NASA NTRS1992

Mechanical failure probability of glasses in Earth orbit

Results of five years of earth-orbital exposure on mechanical properties of glasses indicate that radiation effects on mechanical properties of glasses, for the glasses examined, are less than the probable error of measurement. During the 5 year exposure, seven micrometeorite or space debris impacts occurred on the samples examined. These impacts were located in locations which were not subjected to effective mechanical testing, hence limited information on their influence upon mechanical strength was obtained. Combination of these results with micrometeorite and space debris impact frequency obtained by other experiments permits estimates of the failure probability of glasses exposed to mechanical loading under earth-orbit conditions. This probabilistic failure prediction is described and illustrated with examples.

Kinser, Donald L.↗
NASA NTRS1994

Tracking the Galileo spacecraft with the DSCC Galileo Telemetry prototype

On day of the year 062, 1994, a prototype of the Deep Space Communications Complex Galileo Telemetry subsystem successfully tracked and processed signals from the Galileo spacecraft, under fully suppressed-carrier modulation. The demonstration took place at Goldstone, employing the 70-m antenna and the 34-m high-efficiency antenna. This article presents the findings from that demonstration. Specific issues are the system performance in terms of signal-to-noise (SNR) degradation and the arraying gain. Validation of the test results is via symbol-error-rate measurement and the standard symbol SNR. The analysis is also extended to include characterization of the signal received from Galileo.

Pham, T. T.↗
NASA NTRS1999

Uncertainty Analysis of Instrument Calibration and Application

Experimental aerodynamic researchers require estimated precision and bias uncertainties of measured physical quantities, typically at 95 percent confidence levels. Uncertainties of final computed aerodynamic parameters are obtained by propagation of individual measurement uncertainties through the defining functional expressions. In this paper, rigorous mathematical techniques are extended to determine precision and bias uncertainties of any instrument-sensor system. Through this analysis, instrument uncertainties determined through calibration are now expressed as functions of the corresponding measurement for linear and nonlinear univariate and multivariate processes. Treatment of correlated measurement precision error is developed. During laboratory calibration, calibration standard uncertainties are assumed to be an order of magnitude less than those of the instrument being calibrated. Often calibration standards do not satisfy this assumption. This paper applies rigorous statistical methods for inclusion of calibration standard uncertainty and covariance due to the order of their application. The effects of mathematical modeling error on calibration bias uncertainty are quantified. The effects of experimental design on uncertainty are analyzed. The importance of replication is emphasized, techniques for estimation of both bias and precision uncertainties using replication are developed. Statistical tests for stationarity of calibration parameters over time are obtained.

Tripp, John S.↗
NASA NTRS1999

Gamma-Ray Burst Class Properties

Guided by the Supervised pattern recognition algorithm C4.5, we examine the three gamma-ray burst classes identified by Mukherjee et al. C4.5 provides strong statistical support for this classification. However, with C4.5 and our knowledge of the BATSE instrument, we demonstrate that Class 3 (intermediate fluence, intermediate duration, soft) does not have to be a distinct source population: statistical/systematic errors in measuring burst attributes combined with the well-known hardness/intensity correlation can cause low peak flux Class I (high fluence, long, intermediate hardness) bursts to take on Class 3 characteristics naturally. Based on our hypothesis that the third class is not a distinct one, we provide rules so that future events can be placed in either Class I or Class 2 (low fluence, short, hard). Using classified bursts from the BATSE 4B Catalog, we plot log(N>P) vs. log(P) curves and study spectral features of each class. We find that the two classes are relatively distinct on the basis of spectral parameters, alpha, Beta, and E(sub peak) alone. Although this does not indicate a better basis for classification, it does suggest that different physical conditions exist for Class I and Class 2 bursts. In the process of studying burst class characteristics, we identify a new bias that affects measurement of burst fluences and durations. Using a simple model of how burst duration can be underestimated, we generally characterize how this fluence duration bias affects BATSE measurements, and demonstrate the type of effect it can have on the BATSE fluence vs. peak flux diagram.

Hakkila, Jon↗
NASA NTRS2000

Gamma-Ray Burst Class Properties

Guided by the supervised pattern recognition algorithm C4.5 developed by Quinlan in 1986, we examine the three gamma-ray burst classes identified by Mukherjee et al. in 1998. C4.5 provides strong statistical support for this classification. However, with C4.5 and our knowledge of the Burst and Transient Source Experiment (BATSE) instrument, we demonstrate that class 3 (intermediate fluence, intermediate duration, soft) does not have to be a distinct source population: statistical/systematic errors in measuring burst attributes combined with the well-known hardness/intensity correlation can cause low peak flux class 1 (high fluence, long, intermediate hardness) bursts to take on class 3 characteristics naturally. Based on our hypothesis that the third class is not a distinct one, we provide rules so that future events can be placed in either class 1 or class 2 (low fluence, short, hard). We find that the two classes are relatively distinct on the basis of Band's work in 1993 on spectral parameters alpha, beta, and E (sub peak) alone. Although this does not indicate a better basis for classification, it does suggest that different physical conditions exist for class 1 and class 2 bursts. In the process of studying burst class characteristics, we identify a new bias affecting burst fluence and duration measurements. Using a simple model of how burst duration can be underestimated, we show how this fluence duration bias can affect BATSE measurements and demonstrate the type of effect it can have on the BATSE fluence versus peak flux diagram.

Hakkila, Jon↗
NASA NTRS2001

A Space Based Internet Protocol System for Sub-Orbital Tracking and Control

Personnel from the Goddard Space Flight Center Wallops Flight Facility (GSFC/WFF) in Virginia are responsible for the overall management of the NASA Sounding Rocket Program. Payloads are generally in support of NASA's Space Science Enterprise's missions and return a variety of scientific data as well as providing a reasonably economical means of conducting engineering tests for instruments and devices used on satellites and other spacecraft. The fifteen types of sounding rockets used by NASA can carry payloads of various weights to altitudes from 50 km to more than 1,300 km. Launch activities are conducted not only from established missile ranges, but also from remote locations worldwide requiring mobile tracking and command equipment to be transported and set up at considerable expense. The advent of low earth orbit (LEO) commercial communications satellites provides an opportunity to dramatically reduce tracking and control costs of launch vehicles and Unpiloted Aerial Vehicles (UAVs) by reducing or eliminating this ground infrastructure. Additionally, since data transmission is by packetized Internet Protocol (IP), data can be received and commands initiated from practically any location. A low cost Commercial Off The Shelf (COTS) system is currently under development for sounding rockets which also has application to UAVs and scientific balloons. Due to relatively low data rate (9600 baud) currently available, the system will first be used to provide GPS data for tracking and vehicle recovery. Range safety requirements for launch vehicles usually stipulate at least two independent tracking sources. Most sounding rockets flown by NASA now carry GPS receivers that output position data via the payload telemetry system to the ground station. The Flight Modem can be configured as a completely separate link thereby eliminating requirement for tracking radar. The system architecture which integrates antennas, GPS receiver, commercial satellite packet data modem, and a single board computer with custom software is described along with the technical challenges and the plan for their resolution. These include antenna development, high Doppler rates, reliability, environmental ruggedness, hand over between satellites and data security. An aggressive test plan is included which in addition to environmental testing measures bit error rate, latency and antenna patterns. Actual flight tests are planned for the near future on aircraft, long duration balloons and sounding rockets and these results as well as the current status of the project are reported.

Bull, Barton↗
NASA NTRS2001

TT and C - First TDRSS, Then Commercial GEO and Big LEO and Now through LEO

The advent of low earth orbit (LEO) commercial communications satellites provides an opportunity to dramatically reduce Telemetry Tracking and Control (TT&C) costs of launch vehicles and Unpiloted Aerial Vehicles (UAVs) by reducing or eliminating ground infrastructure. Personnel from the Goddard Space Flight Center Wallops Flight Facility (GSFC/WFF) in Virginia have successfully used commercial GEO & Big LEO communications satellites for Long Duration Balloon flight TT&C. In addition, TDRSS capability for these balloons has been developed by WFF for the Ultra Long Duration Balloons with the first test flight launch in January 2001 for one global circumnavigation at 120,000 feet altitude launched from Alice Springs. Australia. Numerous other low cost applications can new utilize the commercial LEO satellites for TT&C. The Flight Modern became a GSFC/WFF Advanced Range Technology Initiative (ARTI) in an effort to streamline TT&C capability to the user community at low cost. Phase I ground tests of The Flight Modem verified downlink communications quality of service and measured transmission latencies. These tests were completed last year, Phase II consisting of aircraft flight tests provide much of the data presented in this paper. Phase III of the Flight Modern baseline test program is a demonstration of the ruggedized version of the WFF Flight Modem flown on one sounding rocket launched from Sweden. Flights of opportunity have been and are being actively pursued with other centers, ranges and users at universities. The WFF goal is to reduce TT&C costs by providing a low cost COTS Flight Modem with a User Handbook containing system capability and limitation descriptions. Additionally, since data transmission is by packetized Internet Protocol (IP), data can be received and commands initialed from practically any location with no infrastructure. The WFF, like most ranges, has been using GPS receivers on sounding rockets and long duration balloons for several years, The WFF Flight Modem contains a GPS receiver to provide vehicle position for tracking and vehicle recovery. The system architecture which integrates antennas, GPS receiver, commercial satellite packet data modem. and a single board computer with custom software is described and a number of technical challenges are discussed along with the plan for their resolution. These include antenna development, high Doppler rates, reliability, environmental ruggedness, hand over between satellites and data security. An aggressive test plan is included which in addition to environmental Testing measures bit error rate latency and antenna patterns. Additional flight tests are planned far the near future on aircraft, long duration balloons and sounding rockets and these results as well as the current status of the project arc reported. Use of the WFF Flight Modem on small satellites is also being pursued. The LEO satellite constellation altitude above 1400 km is not an obstacle because most spacecraft do not require continuous Communications. The challenge is scheduling where store and forward techniques for command are required and downlink when the communications link allows connection (above 60 percent of the time depending on the satellite altitude). Sophisticated scheduling techniques utilizing 2-line orbital element sets available on the NASA/NORAD Internet site could be implemented for rare special cases. The current 9600 baud rate of the LEO communications link may be increased With special techniques that are planned for development in the WFF Flight Modem project.

Morgan, Dwayne↗