Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functional oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Colloidal crystal engineering with metal–organic framework nanoparticles and DNA

Abstract Colloidal crystal engineering with nucleic acid-modified nanoparticles is a powerful way for preparing 3D superlattices, which may be useful in many areas, including catalysis, sensing, and photonics. To date, the building blocks studied have been primarily based upon metals, metal oxides, chalcogenide semiconductors, and proteins. Here, we show that metal–organic framework nanoparticles (MOF NPs) densely functionalized with oligonucleotides can be programmed to crystallize into a diverse set of superlattices with well-defined crystal symmetries and compositions. Electron microscopy and small-angle X-ray scattering characterization confirm the formation of single-component MOF superlattices, binary MOF–Au single crystals, and two-dimensional MOF nanorod assemblies. Importantly, DNA-modified porphyrinic MOF nanorods (PCN-222) were assembled into 2D superlattices and found to be catalytically active for the photooxidation of 2-chloroethyl ethyl sulfide (CEES, a chemical warfare simulant of mustard gas). Taken together, these new materials and methods provide access to colloidal crystals that incorporate particles with the well-established designer properties of MOFs and, therefore, increase the scope of possibilities for colloidal crystal engineering with DNA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Tailorable multiferroic tunnel junctions from all-van der Waals multilayer stacking

Multiferroic tunnel junctions (MFTJs) represent a class of multistate, non-volatile spintronic devices, in which electron tunnelling can be manipulated by switching long-range lattice and spin orders. In contrast to conventional oxide-based MFTJs, MFTJs constructed from two-dimensional van der Waals (vdW) crystals promise minimal defect concentration in the constituents and at interfaces, which may allow for probing intrinsic tunnelling physics and the development of high-performance devices. Here, in this study, we construct Fe 3 GeTe 2 /CuInP 2 S 6 /Fe 3 GeTe 2 all-vdW MFTJs by assembling multilayer flakes of ferromagnetic Fe 3 GeTe 2 electrodes and a ferroelectric CuInP 2 S 6 spacer. These MFTJs exhibit four non-volatile resistance states featuring sizable tunnelling magnetoresistance of ∼10 2 % and tunnelling electroresistance of ∼10 4 %. To tune the properties of the vdW MFTJ, we make use of the flexibility in material choice offered by vdW heterostructure devices; we use Fe 3 GeTe 2 /Fe 5 GeTe 2 asymmetric electrodes to boost the tunnelling electroresistance by 10 3 %, we integrate In 2 Se 3 as a ferroelectric with a smaller bandgap to enhance the ON-state current density by 10 4 % to 10 4 A cm −2 and we use Fe 3 GaTe 2 electrodes to demonstrate room temperature operation. Furthermore, when we combine the asymmetric ferromagnetic electrodes with the small-bandgap ferroelectric spacer to construct Fe 3 GeTe 2 /In 2 Se 3 /Fe 5 GeTe 2 MFTJs, we simultaneously realized tunnelling electroresistance of 10 6 % and an ON-state current density of 10 4 A cm −2 , both two orders of magnitude higher than the highest values achieved with conventional oxide-based MFTJs. In the future, our all-vdW MFTJs with the tailorability of all functional layers may make it possible to investigate fundamental aspects of interlayer tunnelling and enable the design of functional magnetoelectric nanodevices.

Xie, Ti [University of Maryland, College Park, MD ↗
DOE OSTI2023

High-efficiency purification of CH 4 and H 2 energy sources enabled by a phosphotungstic acid-supported Os single-atom catalyst

Methane (CH 4 ) and hydrogen (H 2 ) show promise as low-carbon energy sources, but their impurities, including H 2 and CO, pose challenges for storage and use. To address these challenges, a robust purification protocol for CH 4 and/or H 2 , combined with the catalytic conversion of impurities into CO 2 and H 2 O, is a compelling solution. Here, in this work, we investigated 11 phosphotungstic acid (PTA)-supported single-atom catalysts (SACs) by density functional theory (DFT) computations. Os 1 /PTA SACs exhibited superior catalytic activity, and the ease of oxidation follows the CO > H 2 > CH 4 order. It facilitated efficient purification of CH 4 in solvents such as water, MeOH, and various others. For H 2 purification, Os 1 /PTA SACs demonstrated excellent performance in gas, water, and MeOH. Notably, in water and MeOH, it selectively removed CO without consuming H 2 with low free energy barriers. The strong Os-PTA interactions and charge transfer mechanism contributed to its exceptional catalytic activity. Our findings shed light on SAC behavior and their potential for efficient CH 4 and H 2 purification. By addressing impurity challenges and improving clean energy utilization, these findings contribute to the development of sustainable energy technologies.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

The role of surfaces in flexoelectricity

We develop the relationship between the strain derivative of the mean-inner potential and surface contributions to flexoelectricity, identifying the true surface-specific component of the flexoelectric response of finite samples. Density functional theory calculations on a range of experimentally observed, low energy SrTiO 3 , MgO, and Si surfaces demonstrate that the mean-inner potential and its contributions to flexoelectricity are sensitive to small differences in surface structure, chemistry, and adsorbates. We also introduce a method to estimate mean-inner potential contributions to flexoelectricity using electron scattering factors and use this approximation to predict total flexoelectric responses for a variety of insulators. Strategies to experimentally disentangle bulk and surface flexoelectric terms are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Tuning effect of vanadium substitution on the structural and electronic properties of potassium hollandite surfaces

Metal oxide surfaces possess unique properties that are crucial for a wide variety of applications. Herein, density functional theory calculations are performed to study surfaces of potassium hollandite, KMn 8 O 16 , a promising cathode material for electrochemical energy storage, and the vanadium-substituted analog KMn 7 VO 16 . The results show that there is a clear increase in the stability of KMn 8 O 16 with (001) < (110) < (100) or (010), apt to adopt an elongated rod-like morphology. The vanadium (V)-substitution lowers the crystal symmetry and prefers to occupy the surface sites, resulting in electron redistribution and selective tuning of surface energy depending on the surface structures. In particular, the higher stability of substituted V 4+ compared with Mn 4+ ions leads to stabilization of the (001) surface due to the direct interaction of reduced Mn δ+ ions on the surface, while such tuning effect decreases with the increase in surface stability, (110) > (100) and (010). As a result, the KMnO 16 rod is shortened upon V-substitution as observed experimentally, effectively facilitating the ion transport during discharge. The V substituents also introduce stabilization to the defect surfaces resulting from Mn 2+ dissolution during cycling, thereby hindering further structural decay. In conclusion, our study demonstrates the potential tuning effect of V-substitution to promote the ion transport and mitigate the capacity degradation of α-MnO 2 -based materials.

25 ENERGY STORAGE↗
DOE OSTI2025

TRISO Particle Isolation and Graphite Removal Using SRNL Vapor Digestion Technology

Tri-structural isotropic fueled reactors are planned to come online in the next decade, but there is not currently a widely agreed upon disposition pathway for this new fuel stream. For long term used nuclear fuel storage, there would be a significant benefit if the waste volume could be reduced or mitigated. Most of the volume from used TRISO fuel contains graphite. SRNL currently has an active patent which describes one pathway to digest the graphite. One benefit in the utilization of this pathway is that multiple cylindrical pieces can be stacked end-to-end in a reaction tube, then nitric acid and water vapor can be flowed through the tube, and the weight change of the individual cores can provide both a reaction profile and overall oxidant use efficiency. The reaction of nitric acid and graphite passes through a series of intermediate products – NO 2 , NO, and N 2 O – from reaction and decomposition to eventually form N2. The data shows that NO2 grows in with increasing temperature between 500-600°C and then decreases by way of either reaction with graphite or decomposition. Nitric oxide, a reaction and thermal decomposition product of NO 2 , exhibits a consistent decline as a function of temperature, which is consistent with the literature. Similarly, the concentrations of N 2 O and N 2 increase as a function of temperature as their reactions with graphite become more favorable.

Advanced Reactors↗
DOE OSTI2024

Degradation and Upcycling of Poly(acrylic) Acid (PAA)

Poly(acrylic acid) (PAA) is a superabsorbent polymer (SAP) widely used in food, paint, textiles, and household products, such as absorbent hygiene products. Specifically, disposable diaper waste comprises a large majority of hygiene waste, in which 80% is landfilled and 20% is incinerated. This proposal describes new methods to valorize PAA to mitigate pollution and risk of large-scale release, dispersion, and accumulation of PAA into aquatic and terrestrial environments. The first strategy builds upon photoredox catalysis to oxidize PAA, which will allow for subsequent cleavage to PAA into valuable chemical feedstocks with intriguing functional groups that can readily undergo further transformations. Moreover, in conjunction with RAFT polymerization, photoredox catalysis would also lead to preparation of new graft block polymers to serve as pH-sensitive drug delivery vehicles. The second strategy invokes electrocatalysis, which can access different intermediates compared to photoredox catalysis. This method would lead to refunctionalization and repurpose of PAA into hydrogels and zwitterionic polymers that can find utilities in ion exchange, water treatment, soil conditioning, paper reinforcement, pigment retention, shampoo formulation, and drug delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The role of the metal core in the performance of WO x inverse catalysts

In this study, metal-metal oxide inverse catalysts are valuable in diverse applications but selecting pairs is challenging. Here we investigate the role of metal cores (Pt, Ru, Rh, Pd, Ni) in the formation and dynamics of Brønsted acid sites on WO x overlayer on carbon. By in situ/ex situ characterizations, probe chemistry kinetics, and DFT calculations, we demonstrate that metals with varying work functions promote the WO x dispersion, enhancing the Brønsted acidity than the 3D crystallites on carbon at submonolayer coverages by tuning the oxidation state of WO x . The metal core impacts the water splitting and hydroxylation of WO x . Water splitting on Ru-WO x is thermodynamically favorable compared to Ni-WO x and increases the dehydration rate on the former, leading to an activity enhancement by increasing the H 2 pulsing frequency. This study provides insights into optimizing inverse catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Time dependent zero valent iron oxidation and the reductive removal of pertechnetate at variable pH

Elemental iron Fe 0 is a promising reductant for removal of radioactive technetium-99 (Tc) from complex aqueous waste streams that contain sulfate, halides, and other inorganic anions generated during processing of legacy radioactive waste. The impact of sulfate on the kinetics of oxidation and reduction capacity of Fe 0 in the presence of Tc has not been examined. We investigated the oxidative transformation of Fe 0 and reductive removal of TcO 4 - in 0.1 M Na 2 SO 4 as a function of initial pH (i.e., pH i 4, 7, and 10) under aerobic conditions up to 30 days. Tc reduction was the fastest at pH i 7 and slowest at pHi 10 (Tc reduction rate pHi 7 > 4 > 10). Aqueous fraction of Tc was measured at 0.4% at pH i 7 within 6 h, whereas ≥ 97% of Tc was removed from solutions at pH i of 4 and 10 within 24 h. Solid phase characterization showed that magnetite was the only oxidized crystalline phase for the first 6 h regardless of initial pH. Lepidocrocite was the most abundant oxidized product for pH i 10 after 5 days, but was not observed at pH of 4 or 7.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Surface characterization and methane activation on SnO x /Cu 2 O/Cu(111) inverse oxide/metal catalysts

To activate methane at low or medium temperatures is a difficult task and a pre-requisite for the conversion of this light alkane into high value chemicals. In this work, we report the preparation and characterizations of novel SnO x /Cu 2 O/Cu(111) interfaces that enable low-temperature methane activation. Scanning tunneling microscopy identified small, well-dispersed SnO x nanoclusters on the Cu 2 O/Cu(111) substrate with an average size of 8 Å, and such morphology was sustained up to 450 K in UHV annealing. Ambient pressure X-ray photoelectron spectroscopy showed that hydrocarbon species (CH x groups), the product of methane activation, were formed on SnO x /Cu 2 O/Cu(111) at a temperature as low as 300 K. An essential role of the SnO x –Cu 2 O interface was evinced by the SnO x coverage dependence. Systems with a small amount of tin oxide, 0.1–0.2 ML coverage, produced the highest concentration of adsorbed CH x groups. Calculations based on density functional theory showed a drastic reduction in the activation barrier for C–H bond cleavage when going from Cu 2 O/Cu(111) to SnO x /Cu 2 O/Cu(111). On the supported SnO x , the dissociation of methane was highly exothermic (ΔE ~ –35 kcal mol –1 ) and the calculated barrier for activation (~20 kcal mol –1 ) could be overcome at 300–500 K, target temperatures for the conversion of methane to high value chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mesoporous silica-encapsulated gold core–shell nanoparticles for active solvent-free benzyl alcohol oxidation

Silica-encapsulated gold core@shell nanoparticles (Au@SiO2 CSNPs) were synthesized via a bottom-up procedure and used to catalyze the selective oxidation of benzyl alcohol. The pore size, morphology, crystallinity and composition of Au@SiO2 was evaluated using non-local density functional theory, transmission electron microscopy, high-energy x-ray diffraction and inductively coupled plasma-mass spectroscopy, respectively. The nanoparticles exhibit a mesoporous shell with an average thickness of 25.5 Å which can enhance selectivity via preferential transport of the desired product (i.e., benzaldehyde) relative to larger, undesired products (i.e, benzoic acid/benzyl benzoate). GC-FID analysis revealed the addition of potassium carbonate to the solvent-free oxidation of benzyl alcohol increased conversion from 17.3 to 60.4% while decreasing selectivity from 98.7 to 75.0%. Under equivalent conditions, a bare gold nanoparticle control catalyst deposited on a silica support with a similar gold surface area took 6 times as long to reach the same conversion, achieving only 49.4% selectivity. These results suggest that the pore size distribution within the inert silica shell of Au@SiO2 CSNPs inhibits the formation of undesired products to facilitate the selective oxidation of benzaldehyde despite a basic environment, which reduces selectivity under typical conditions. The CSNPs demonstrated a much lower activation energy than the Au-SiO2 control catalyst, 37 ± 1.9 kJ/mol and 72 ± 7.1 kJ/mol, respectively. Thiele modulus analysis indicates the CSNP pore structure does not create a mass transport limitation due to the nano-scale path of diffusion through the pore structure to the active surface. The lower activation energy and mesopore distribution together suggest the Au@SiO2 catalyst demonstrates higher activity through beneficial in-pore orientation, both reducing competitive adsorption and promoting a single, lower activation energy mechanistic pathway.

benzyl alcohol oxidation, catalysis, confinement↗
DOE OSTI2021

Elucidating Hydrogen Reaction-Induced Water Desorption from Oxide-Passivated Metal Surfaces for Plasma Applications

Elucidating the mechanisms responsible for sub-microsecond desorption of water and other impurities from electrode surfaces at high heating rates is crucial for understanding pulsed power behavior. Ionization of desorbed impurities in the vacuum regions causes power or current loss; devising methods to limit such desorption during the short time scale of pulsed power is needed to improve corresponding applications. Previous molecular modeling studies have strongly suggested that, under high vacuum conditions, the amount of water impurity desorbing from oxide surfaces on metal electrodes is at a sub-monolayer level at room temperature, which appears insufficient to explain observed pulsed power energy losses at high current densities. In this work, we apply Density Functional Theory (DFT) techniques to show that hydrogen trapped inside iron metal can diffuse into hematite (α-Fe 2 O 3 ) on the metal surface, ultimately reacting with the oxide to form Fe(II) and H 2 O. The latter desorbs at elevated temperature and may explain the anomalous amount of desorbed impurity inferred from pulsed-power experiments. We also apply a suite of characterization techniques to demonstrate that when iron metal is heated to 650 °C, the dominant surface oxide component becomes α-Fe 2 O 3 . The oxide facets exposed are found to be a mixture of (0001), (10-10), and others, in agreement with the DFT models used.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

High Performing Inverted Flexible Perovskite Solar Cells via Solution Phase Deposition of Yttrium-Doped SnO 2 Directly on Perovskite

Solution processing of flexible perovskite solar cells (f-PSCs) provides an avenue for scalable, high-throughput printing of lightweight, scalable, and cost-effective flexible solar cells. However, the deposition of fully solution-processed metal oxide charge transport layers on perovskites has been limited by solvent incompatibilities and high processing temperatures for metal oxide nanoparticles. In this study, we present high-performance, inverted f-PSCs from the direct deposition of yttrium doped SnO 2 nanoparticles functionalized with acetate on top of perovskite as an ink in anhydrous ethanol via blade coating. Yttrium doping improved device performance by improving the charge extraction leading with a decreased series resistance leading to improvements in the open-circuit voltage and fill factor. Furthermore, the champion power conversion efficiency for 0.1 cm 2 devices increased from 14.3% for undoped SnO 2 to 18.2% with 2% Y:SnO 2 doping, which is unprecedented for f-PSCs on ITO-PET substrate employing SnO 2 as an ETL.

14 SOLAR ENERGY↗
DOE OSTI2024

Understanding atom probe’s analytical performance for iron oxides using correlation histograms and ab initio calculations

Abstract Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (10 10 Vm −1 ), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT). For instance, neutral molecules formed through dissociation may not be detected at all or with a time of flight no longer related to their mass, causing their loss from the analysis. Here, we evaluated the changes in the measured composition of FeO, Fe 2 O 3 and Fe 3 O 4 across a wide range of analysis conditions. Possible dissociation reactions are predicted by density-functional theory calculations considering the spin states of the molecules. The energetically favoured reactions are traced on to the multi-hit ion correlation histograms, to confirm their existence within experiments, using an automated Python-based routine. The detected reactions are carefully analyzed to reflect upon the influence of these neutrals from dissociation reactions on the performance of APT for analysing iron oxides.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Bismuth-Functionalized Silica Aerogels for Iodine Capture

The U.S. Department of Energy is looking into alternative sorbents for the removal of radioiodine from off-gas streams in a used nuclear fuel reprocessing plant. One class of sorbents considered are bismuth-functionalized silica aerogels which offer an efficient capture of iodine from off-gas streams and are environmentally friendly and lower cost when compared to silver-functionalized sorbents. Two types of bismuth-functionalized silica aerogels were successfully manufactured using a hierarchical synthesis approach:1) The Bi 3+ -aerogel with bismuth oxide nitrate hydroxide hydrate particles and 2) Bi-aerogel with bismuth metal and bismuth sulfide nanoparticles. Both sorbents exhibited high sorption capacity for iodine. However, presence of particles of different composition, size, and distribution on aerogel support resulted in different iodine loadings. The Bi 3+ -aerogel exhibited sorption capacity of 289 mg/g. In contrast, Bi-aerogel exhibited more that 20% higher sorption capacity. The heat-treatment of Bi 3+ -aerogel at 225? under hydrogen atmosphere increased iodine loading capacity to 351 mg/g.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Prediction of Redox Potentials for U, Np, Pu, and Am in Aqueous Solution

The redox properties of the actinides in aqueous solution are important for fuel production/reprocessing and understanding the environmental impact of nuclear waste. The redox potentials for U, Np, Pu, and Am in oxidation states from 0 up to VII (as appropriate) in aqueous solutions have been predicted at the density functional theory level with the B3LYP functional, Stuttgart small core pseudopotential basis sets for the actinides, and explicit (30H 2 O molecules)/implicit treatment of the aqueous solvent using the self-consistent reaction field COSMO and SMD approaches for the implicit solvation. The predictions of the structural parameters of clusters incorporating first and second solvation shells are consistent with the available experimental data., Our results are typically within 0.2 V of the available experimental data using two explicit solvation shells with an implicit solvent model. The use of the PW91 functional substantially improved the prediction of the Pu(VI/V) redox couple. The redox couples for An(VI/IV) and An(V/IV) which involve the addition of protons and removal of the actinyl oxygens led to slightly larger differences from experiment. Here, the An(IV/0) and An(III/0) couples were reliably predicted with our approach. Predictions of the unknown An(II/I) redox potentials were negative, consistent with expectations, and predictions for unknown An(VII/VI), An(III/II), and An(II/0) redox couples improve prior estimates.

Actinides↗