Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

On-Sun Performance Evaluation of Alternative High-Temperature Falling Particle Receiver Designs

This paper evaluates the on-sun performance of a 1 MW falling particle receiver. Two particle receiver designs were investigated: obstructed flow particle receiver versus free-falling particle receiver. The intent of the tests was to investigate the impact of particle mass flow rate, irradiance, and particle temperature on the particle temperature rise and thermal efficiency of the receiver for each design. Results indicate that the obstructed flow design increased the residence time of the particles in the concentrated flux, thereby increasing the particle temperature and thermal efficiency for a given mass flow rate. Here, the obstructions, a staggered array of chevron-shaped mesh structures, also provided more stability to the falling particles, which were prone to instabilities caused by convective currents in the free-fall design. Challenges encountered during the tests included nonuniform mass flow rates, wind impacts, and oxidation/deterioration of the mesh structures. Alternative materials, designs, and methods are presented to overcome these challenges.

14 SOLAR ENERGY↗

Topology Optimization of 3D Flow Fields for Flow Batteries

We report as power generated from renewables becomes more readily available, the need for power-efficient energy storage devices, such as redox flow batteries, becomes critical for successful integration of renewables into the electrical grid. An important aspect of a redox flow battery is the planar flow field, which is usually composed of two-dimensional channels etched into a backing plate. As reactant-laden electrolyte flows into the flow battery, the channels in the flow field distribute the fluid throughout the reactive porous electrode. We utilize topology optimization to design flow fields with full three-dimensional geometry variation, i.e., 3D flow fields. Specifically, we focus on vanadium redox flow batteries and use the optimization algorithm to generate 3D flow fields evolved from standard interdigitated flow fields by minimizing the electrical and flow pressure power losses. To understand how these 3D designs improve performance, we analyze the polarization of the reactant concentration and exchange current within the electrode to highlight how the designed flow fields mitigate the presence of electrode dead zones. While interdigitated flow fields can be heuristically engineered to yield high performance by tuning channel and land dimensions, such a process can be laborious; this work provides a framework for automating that design process.

25 ENERGY STORAGE↗

Temporal Large-Eddy Simulation

In 1999, Stolz and Adams unveiled a subgrid-scale model for LES based upon approximately inverting (defiltering) the spatial grid-filter operator and termed .the approximate deconvolution model (ADM). Subsequently, the utility and accuracy of the ADM were demonstrated in a posteriori analyses of flows as diverse as incompressible plane-channel flow and supersonic compression-ramp flow. In a prelude to the current paper, a parameterized temporal ADM (TADM) was developed and demonstrated in both a priori and a posteriori analyses for forced, viscous Burger's flow. The development of a time-filtered variant of the ADM was motivated-primarily by the desire for a unifying theoretical and computational context to encompass direct numerical simulation (DNS), large-eddy simulation (LES), and Reynolds averaged Navier-Stokes simulation (RANS). The resultant methodology was termed temporal LES (TLES). To permit exploration of the parameter space, however, previous analyses of the TADM were restricted to Burger's flow, and it has remained to demonstrate the TADM and TLES methodology for three-dimensional flow. For several reasons, plane-channel flow presents an ideal test case for the TADM. Among these reasons, channel flow is anisotropic, yet it lends itself to highly efficient and accurate spectral numerical methods. Moreover, channel-flow has been investigated extensively by DNS, and a highly accurate data base of Moser et.al. exists. In the present paper, we develop a fully anisotropic TADM model and demonstrate its utility in simulating incompressible plane-channel flow at nominal values of Re(sub tau) = 180 and Re(sub tau) = 590 by the TLES method. The TADM model is shown to perform nearly as well as the ADM at equivalent resolution, thereby establishing TLES as a viable alternative to LES. Moreover, as the current model is suboptimal is some respects, there is considerable room to improve TLES.

Pruett, C. D.↗

Experimental and Computational Analysis of Unidirectional Flow Through Stirling Engine Heater Head

A high efficiency Stirling Radioisotope Generator (SRG) is being developed for possible use in long-duration space science missions. NASA s advanced technology goals for next generation Stirling convertors include increasing the Carnot efficiency and percent of Carnot efficiency. To help achieve these goals, a multi-dimensional Computational Fluid Dynamics (CFD) code is being developed to numerically model unsteady fluid flow and heat transfer phenomena of the oscillating working gas inside Stirling convertors. In the absence of transient pressure drop data for the zero mean oscillating multi-dimensional flows present in the Technology Demonstration Convertors on test at NASA Glenn Research Center, unidirectional flow pressure drop test data is used to compare against 2D and 3D computational solutions. This study focuses on tracking pressure drop and mass flow rate data for unidirectional flow though a Stirling heater head using a commercial CFD code (CFD-ACE). The commercial CFD code uses a porous-media model which is dependent on permeability and the inertial coefficient present in the linear and nonlinear terms of the Darcy-Forchheimer equation. Permeability and inertial coefficient were calculated from unidirectional flow test data. CFD simulations of the unidirectional flow test were validated using the porous-media model input parameters which increased simulation accuracy by 14 percent on average.

Wilson, Scott D.↗

Calculation of compressible flow about three-dimensional inlets with auxiliary inlets, slats and vanes by means of a panel method

An efficient and user oriented method was constructed for calculating flow in and about complex inlet configurations. Efficiency is attained by: (1) the use of a panel method; (2) a technique of superposition for obtaining solutions at any inlet operating condition; and (3) employment of an advanced matrix iteration technique for solving large full systems of equations, including the nonlinear equations for the Kutta condition. User concerns are addressed by the provision of several novel graphical output options that yield a more complete comprehension of the flowfield than was possible previously.

Hess, J. L.↗

Efficiency of plasma actuator ionization in shock wave modification in a rarefied supersonic flow over a flat plate

This paper describes experimental and numerical investigations focused on the shock wave modification, induced by a dc glow discharge, of a Mach 2 flow under rarefied regime. The model under investigation is a flat plate equipped with a plasma actuator composed of two electrodes. The glow discharge is generated by applying a negative potential to the upstream electrode, enabling the creation of a weakly ionized plasma. The natural flow (i.e. without the plasma) exhibits a thick laminar boundary layer and a shock wave with a hyperbolic shape. Images of the flow obtained with an ICCD camera revealed that the plasma discharge induces an increase in the shock wave angle. Thermal effects (volumetric, and at the surface) and plasma effects (ionization, and thermal non-equilibrium) are the most relevant processes explaining the observed modifications. The effect induced by the heating of the flat plate surface is studied experimentally by replacing the upstream electrode by a heating element, and numerically by modifying the thermal boundary condition of the model surface. The results show that for a similar temperature distribution over the plate surface, modifications induced by the heating element are lower than those produced by the plasma. This difference shows that other effects than purely thermal effects are involved with the plasma actuator. Measurements of the electron density with a Langmuir probe highlight the fact that the ionization degree plays an important role into the modification of the flow. The gas properties, especially the isentropic exponent, are indeed modified by the plasma above the actuator and upstream the flat plate. This leads to a local modification of the flow conditions, inducing an increase in the shock wave angle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An efficient pressure-velocity procedure for gas-droplet two-phase flow calculations

This paper presents a noniterative numerical technique for computing time-dependent gas-droplet flows. The method is a fully interacting combination of Eulerian fluid and Lagrangian particle calculations. The interaction calculations between the two phases are formulated on a pressure-velocity-coupling procedure based on the operator-splitting technique. This procedure eliminates the global iterations required in the conventional particle-source-in-cell procedure. Turbulent dispersion calculations are treated by a stochastic procedure. Numerical calculations and comparisons with available experimental data as well as efficiency assessments are given for some sprays typical of spray combustion applications.

Chen, C. P.↗

CRADA: Improved H2/Br2 Flow Batteries

This CRADA is established to jointly develop H2/Br2 flow batteries with improved materials sets and understanding between TVN Systems and LBNL. The focus of the activities is the testing and optimization of flow battery components to meet efficiency and power requirements. The proposed work is essentially all experimental where TVN Systems will use their knowledge and expertise in membrane-electrode-assembly (MEA) design and fabrication using novel catalyst and membrane materials and LBNL will use their existing knowledge and expertise in flow-battery cell assembly and testing for performance and durability.

25 ENERGY STORAGE↗

Formation of an optical pulsed discharge in a supersonic air flow by radiation of a repetitively pulsed CO{sub 2} laser

Results of optimisation of repetitively pulsed CO{sub 2}-laser generation are presented for finding physical conditions of forming stable burning of an optical pulsed discharge (OPD) in a supersonic air flow and for studying the influence of pulse parameters on the energy absorption efficiency of laser radiation in plasma. The optical discharge in a supersonic air flow was formed by radiation of a repetitively pulsed CO{sub 2} laser with mechanical Q-switching excited by a discharge with a convective cooling of the working gas. For the first time the influence of radiation pulse parameters on the ignition conditions and stable burning of the OPD in a supersonic air flow was investigated and the efficiency of laser radiation absorption in plasma was studied. The influence of the air flow velocity on stability of plasma production was investigated. It was shown that stable burning of the OPD in a supersonic flow is realised at a high pulse repetition rate where the interval between radiation pulses is shorter than the time of plasma blowing-off. Study of the instantaneous value of the absorption coefficient shows that after a breakdown in a time lapse of 100 - 150 ns, a quasi-stationary 'absorption phase' is formed with the duration of {approx}1.5 ms, which exists independently of air flow and radiation pulse repetition rate. This phase of strong absorption is, seemingly, related to evolution of the ionisation wave. (laser applications and other topics in quantum electronics)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TRANSPORT BY MERIDIONAL CIRCULATIONS IN SOLAR-TYPE STARS

Transport by meridional flows has significant consequences for stellar evolution, but is difficult to capture in global-scale numerical simulations because of the wide range of timescales involved. Stellar evolution models therefore usually adopt parameterizations for such transport based on idealized laminar or mean-field models. Unfortunately, recent attempts to model this transport in global simulations have produced results that are not consistent with any of these idealized models. In an effort to explain the discrepancies between global simulations and idealized models, here we use three-dimensional local Cartesian simulations of compressible convection to study the efficiency of transport by meridional flows below a convection zone in several parameter regimes of relevance to the Sun and solar-type stars. In these local simulations we are able to establish the correct ordering of dynamical timescales, although the separation of the timescales remains unrealistic. We find that, even though the generation of internal waves by convective overshoot produces a high degree of time dependence in the meridional flow field, the mean flow has the qualitative behavior predicted by laminar, 'balanced' models. In particular, we observe a progressive deepening, or 'burrowing', of the mean circulation if the local Eddington-Sweet timescale is shorter than the viscous diffusion timescale. Such burrowing is a robust prediction of laminar models in this parameter regime, but has never been observed in any previous numerical simulation. We argue that previous simulations therefore underestimate the transport by meridional flows.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional modeling of outcrop-to-outcrop hydrothermal circulation on the eastern flank of the Juan de Fuca Ridge

We present three-dimensional simulations of coupled fluid and heat transport in the ocean crust, to explore patterns and controls on ridge-flank hydrothermal circulation on the eastern flank of the Juan de Fuca Ridge. Field studies have shown that there is large-scale fluid flow in the volcanic ocean crust in this region, including local convection and circulation between two basement outcrops separated by ~50 km. New simulations include an assessment of crustal permeability and aquifer thickness, outcrop permeability, the potential influence of multiple discharging outcrops, and a comparison between two-dimensional (profile) and three-dimensional representations of the natural system. Field observations that help to constrain new simulations include a modest range of flow rates between recharging and discharging outcrops, secondary convection adjacent to the recharging outcrop, crustal permeability determinations made in boreholes, and the lack of a regional seafloor heat flux anomaly as a consequence of advective heat loss from the crust. Three-dimensional simulations are most consistent with field observations when models use a crustal permeability of 3 ×10 -13 to 2 × 10 -12 m 2 , and the crustal aquifer is ≤300 m thick, values consistent with borehole observations. Here, we find fluid flow rates and crustal cooling efficiencies that are an order of magnitude greater in three-dimensional simulations than in two-dimensional simulations using equivalent properties. Lastly, simulations including discharge from an additional outcrop can also replicate field observations but tend to increase the overall rate of recharge and reduce the flow rate at the primary discharge site.

58 GEOSCIENCES↗

Aerodynamics of loaded cascades in subsonic flows subject to unsteady three-dimensional vortical disturbances

A highly efficient numerical method is developed for three-dimensional, periodic, vortical flows around a cascade of loaded airfoils. The method linearizes Euler's equations about the mean flow of the cascade and thus fully accounts for the effects of distortion of the vortical disturbances as they propogate and interact with the cascade mean flow. The numerical scheme is based on splitting the unsteady velocity into vortical and potential parts. The latter is governed by a non-constant coefficient inhomogeneous convective wave equation. A new and computationally suitable out-flow conditions are derived and avoid the difficulties associated with the singular velocity downstream. Solutions were obtained in the frequency domain by using a body-fitted coordinate system. Results are presented to demonstrate the effects of the out-flow boundary conditions, cascade spacing, mean blade loading and gust upstream conditions on the aerodynamics response and unsteady pressure field of a cascade.

Fang, J.↗

CONSTRAINING THE PHYSICAL CONDITIONS IN THE JETS OF γ-RAY FLARING BLAZARS USING CENTIMETER-BAND POLARIMETRY AND RADIATIVE TRANSFER SIMULATIONS. II. EXPLORING PARAMETER SPACE AND IMPLICATIONS

We analyze the shock-in-jet models for the γ-ray flaring blazars 0420-014, OJ 287, and 1156+295 presented in Paper I, quantifying how well the modeling constrains internal properties of the flow (low-energy spectral cutoff, partition between random and ordered magnetic field), the flow dynamics (quiescent flow speed and orientation), and the number and strength of the shocks responsible for radio-band flaring. We conclude that well-sampled, multifrequency polarized flux light curves are crucial for defining source properties. We argue for few, if any, low-energy particles in these flows, suggesting no entrainment and efficient energization of jet material, and for approximate energy equipartition between the random and ordered magnetic field components, suggesting that the ordered field is built by nontrivial dynamo action from the random component, or that the latter arises from a jet instability that preserves the larger-scale, ordered flow. We present evidence that the difference between orphan radio-band (no γ-ray counterpart) and non-orphan flares is due to more complex shock interactions in the latter case.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental quiet engine program aerodynamic performance of Fan B

This report presents the aerodynamic component test results of Fan B, one of two high-bypass-ratio, 1160 feet per second (353.6 m/sec) single-stage fans, which was designed and tested as part of the NASA Experimental Quiet Engine Program. The fan was designed to deliver a bypass pressure ratio of 1.50 with an adiabatic efficiency of 87.0% at a total fan flow of 950 lb/sec (430.9 kg/sec). It was tested with and without inlet distortion. A bypass total pressure ratio of 1.52 and an adiabatic efficiency of 86.9% at a total fan flow of 966 lb/sec (438.2 kg/sec) were actually achieved. An operating margin of 19.5% was demonstrated at design speed.

Giffin, R. G.↗

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗

Learning nonlinear operators in latent spaces for real-time predictions of complex dynamics in physical systems

Abstract Predicting complex dynamics in physical applications governed by partial differential equations in real-time is nearly impossible with traditional numerical simulations due to high computational cost. Neural operators offer a solution by approximating mappings between infinite-dimensional Banach spaces, yet their performance degrades with system size and complexity. We propose an approach for learning neural operators in latent spaces, facilitating real-time predictions for highly nonlinear and multiscale systems on high-dimensional domains. Our method utilizes the deep operator network architecture on a low-dimensional latent space to efficiently approximate underlying operators. Demonstrations on material fracture, fluid flow prediction, and climate modeling highlight superior prediction accuracy and computational efficiency compared to existing methods. Notably, our approach enables approximating large-scale atmospheric flows with millions of degrees, enhancing weather and climate forecasts. Here we show that the proposed approach enables real-time predictions that can facilitate decision-making for a wide range of applications in science and engineering.

97 MATHEMATICS AND COMPUTING↗