Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fault analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Present-day kinematics of the Rivera plate and implications for tectonics in southwestern Mexico

A model for the present-day motion of the Rivera plate relative to the North America, Cocos, and Pacific plates is derived using new data from the Pacific-Rivera rise and Rivera transform fault, together with new estimates of Pacific-Rivera motions. The results are combined with the closure-consistent NUVEL-1 global plate motion model of DeMets et al. (1990) to examine present-day deformation in southwestern Mexico. The analysis addresses several questions raised in previous studies of the Rivera plate. Namely, do plate motion data from the northern East Pacific rise require a distinct Rivera plate? Do plate kinematic data require the subduction of the Rivera plate along the seismically quiescent Acapulco trench? If so, what does the predicted subduction rate imply about the earthquake recurrence interval in the Jalisco region of southwestern Mexico?

Demets, Charles↗
NASA NTRS1997

OPAD-EDIFIS Real-Time Processing

The Optical Plume Anomaly Detection (OPAD) detects engine hardware degradation of flight vehicles through identification and quantification of elemental species found in the plume by analyzing the plume emission spectra in a real-time mode. Real-time performance of OPAD relies on extensive software which must report metal amounts in the plume faster than once every 0.5 sec. OPAD software previously written by NASA scientists performed most necessary functions at speeds which were far below what is needed for real-time operation. The research presented in this report improved the execution speed of the software by optimizing the code without changing the algorithms and converting it into a parallelized form which is executed in a shared-memory multiprocessor system. The resulting code was subjected to extensive timing analysis. The report also provides suggestions for further performance improvement by (1) identifying areas of algorithm optimization, (2) recommending commercially available multiprocessor architectures and operating systems to support real-time execution and (3) presenting an initial study of fault-tolerance requirements.

Katsinis, Constantine↗
NASA NTRS2011

Improving Distributed Diagnosis Through Structural Model Decomposition

Complex engineering systems require efficient fault diagnosis methodologies, but centralized approaches do not scale well, and this motivates the development of distributed solutions. This work presents an event-based approach for distributed diagnosis of abrupt parametric faults in continuous systems, by using the structural model decomposition capabilities provided by Possible Conflicts. We develop a distributed diagnosis algorithm that uses residuals computed by extending Possible Conflicts to build local event-based diagnosers based on global diagnosability analysis. The proposed approach is applied to a multitank system, and results demonstrate an improvement in the design of local diagnosers. Since local diagnosers use only a subset of the residuals, and use subsystem models to compute residuals (instead of the global system model), the local diagnosers are more efficient than previously developed distributed approaches.

Bregon, Anibal↗
NASA NTRS2024

Clear Lake Volcanic Field Disasters: Creating a Deformation Record Using InSAR to Assess Hazards and Detect Volcanic Unrest in Clear Lake Volcanic Field

Clear Lake Volcanic Field (CLVF) in northern California is at a high threat potential for volcanic hazards. Eruptions leading to increased seismic activity could result in silicic domes, cinder cones, and flows that would be dangerous to the residential areas near the volcanic field. Remotely sensed Earth observations can reveal volcanic processes in the subsurface, which are essential to the timely monitoring of potential volcanic activity. In particular, Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Digital Elevation Model (DEM) data capture relative surface deformation at unprecedented high spatial and temporal resolutions. Leveraging C-SAR and DEMs, we conducted interferometric analysis from January 2016 to December 2023. Our results demonstrate 1) the mean surface displacement velocity of the Clear Lake Volcanic Field is measured to undergo 5 to 10-centimeter scale deformation and shows a strong relationship with the surrounding faults, 2) apparent seasonal differences in rates of surface change, and 3) seismic activity associated with the geyser geothermal field has a strong association with cumulative surface displacement, with active fault zones having 2 to 5 cm of additional displacement. Results indicate that deformation is linked to deep pressure sources causing stresses on the surficial environment that should be considered in hazard mitigation. This study provides a baseline of historic deformation, aiding hazard analysts in communication efforts and streamlining decision-making for potential risks to region residents.

remote sensing↗
NASA NTRSDate not supplied

Creating a Deformation Time Series Utilizing InSAR to Assess Hazards and Detect Volcanic Unrest in Clear Lake Volcanic Field, California

According to the U.S Geological Survey, the Clear Lake Volcanic Field (CLVF) in northern California is at a high threat potential for volcanic hazards. Eruptions leading to increased seismic activity could result in silicic domes, cinder cones, and flows that would be dangerous to the residential areas near the volcanic field. Remotely sensed Earth observations can reveal volcanic processes in the subsurface, which are essential to the timely monitoring of potential volcanic activity. In particular, Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Digital Elevation Model (DEM) data capture relative surface deformation at unprecedented high spatial and temporal resolutions. Leveraging C-SAR and DEMs, we conducted interferometric analysis from January 2016 to December 2023. Our results demonstrate 1) the mean surface displacement velocity of the Clear Lake Volcanic field is measured to undergo 5 to 10-centimeter scale deformation and shows a strong correlation with the surrounding faults, 2) apparent seasonal differences in rates of surface change, and 3) seismic activity associated with the geyser geothermal field has a strong correlation with cumulative surface displacement, with active fault zones having 2 to 5 cm of additional displacement. Results indicate that deformation is linked to deep pressure sources causing stresses on the surficial environment that should be considered in hazard mitigation. This study provides a baseline of historic deformation, aiding hazard analysts in communication efforts and streamlining decision-making for potential risks to region residents.

Ivan Tochimani-Hernandez↗
DOE OSTI2026

Wildfire-Power Grid Interactions: Feedback, Impacts, Monitoring, Modeling, and Mitigation Strategies

Wildfires are increasingly interacting with electric power systems through a two-way hazard chain: fires damage grid assets and trigger cascading outages, while grid faults can ignite new fires under hot, dry, and windy conditions. This review synthesizes the state of knowledge across five domains: (i) physical impacts of flames, heat, and smoke on lines, towers, insulators, and substations; (ii) power-infrastructure-initiated ignitions via conductor clash, high-impedance faults, and corona discharge; (iii) widespread blackouts and disproportionate societal impacts; (iv) multi-scale monitoring spanning laboratory tests, in-situ and grid-integrated sensors, and Earth observation; (v) coupled modeling that links fire behavior with grid operations; and (vi) technological and strategic mitigation pathways spanning prevention, response, and recovery. We integrate these domains into a novel 'feedback-aware' socio-technical framework. Through a longitudinal analysis (2005-2025) of global incidents, we identify that while vegetation contact remains the most frequent ignition source, aging infrastructure failure has emerged as a critical driver of catastrophic 'mega-fires'. We further identify persistent gaps, including limited interoperability of high-frequency grid and environmental data, scarce real-time data assimilation, and under-developed equity metrics for outage management. We conclude by outlining a research agenda to (1) deploy interoperable sensing architectures, (2) advance feedback-coupled fire-grid simulations, and (3) evaluate mitigation portfolios through techno-economic and fairness lenses. Recognizing wildfire-grid interactions as coupled socio-technical systems is essential for protecting infrastructure and communities and for ensuring reliable, sustainable electricity in a changing world.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2016

Reliability and Maintainability Analysis for the Amine Swingbed Carbon Dioxide Removal System

I have performed a reliability & maintainability analysis for the Amine Swingbed payload system. The Amine Swingbed is a carbon dioxide removal technology that has gone through 2,400 hours of International Space Station on-orbit use between 2013 and 2016. While the Amine Swingbed is currently an experimental payload system, the Amine Swingbed may be converted to system hardware. If the Amine Swingbed becomes system hardware, it will supplement the Carbon Dioxide Removal Assembly (CDRA) as the primary CO2 removal technology on the International Space Station. NASA is also considering using the Amine Swingbed as the primary carbon dioxide removal technology for future extravehicular mobility units and for the Orion, which will be used for the Asteroid Redirect and Journey to Mars missions. The qualitative component of the reliability and maintainability analysis is a Failure Modes and Effects Analysis (FMEA). In the FMEA, I have investigated how individual components in the Amine Swingbed may fail, and what the worst case scenario is should a failure occur. The significant failure effects are the loss of ability to remove carbon dioxide, the formation of ammonia due to chemical degradation of the amine, and loss of atmosphere because the Amine Swingbed uses the vacuum of space to regenerate the Amine Swingbed. In the quantitative component of the reliability and maintainability analysis, I have assumed a constant failure rate for both electronic and nonelectronic parts. Using this data, I have created a Poisson distribution to predict the failure rate of the Amine Swingbed as a whole. I have determined a mean time to failure for the Amine Swingbed to be approximately 1,400 hours. The observed mean time to failure for the system is between 600 and 1,200 hours. This range includes initial testing of the Amine Swingbed, as well as software faults that are understood to be non-critical. If many of the commercial parts were switched to military-grade parts, the expected mean time to failure would be 2,300 hours. Both calculated mean times to failure for the Amine Swingbed use conservative failure rate models. The observed mean time to failure for CDRA is 2,500 hours. Working on this project and for NASA in general has helped me gain insight into current aeronautics missions, reliability engineering, circuit analysis, and different cultures. Prior my internship, I did not have a lot knowledge about the work being performed at NASA. As a chemical engineer, I had not really considered working for NASA as a career path. By engaging in interactions with civil servants, contractors, and other interns, I have learned a great deal about modern challenges that NASA is addressing. My work has helped me develop a knowledge base in safety and reliability that would be difficult to find elsewhere. Prior to this internship, I had not thought about reliability engineering. Now, I have gained a skillset in performing reliability analyses, and understanding the inner workings of a large mechanical system. I have also gained experience in understanding how electrical systems work while I was analyzing the electrical components of the Amine Swingbed. I did not expect to be exposed to as many different cultures as I have while working at NASA. I am referring to both within NASA and the Houston area. NASA employs individuals with a broad range of backgrounds. It has been great to learn from individuals who have highly diverse experiences and outlooks on the world. In the Houston area, I have come across individuals from different parts of the world. Interacting with such a high number of individuals with significantly different backgrounds has helped me to grow as a person in ways that I did not expect. My time at NASA has opened a window into the field of aeronautics. After earning a bachelor's degree in chemical engineering, I plan to go to graduate school for a PhD in engineering. Prior to coming to NASA, I was not aware of the graduate Pathways program. I intend to apply for the graduate Pathways program as positions are opened up. I would like to pursue future opportunities with NASA, especially as my engineering career progresses.

Dunbar, Tyler↗
DOE OSTI2022

Grid-Supportive Loads - A New Approach to Increasing Renewable Energy in Power Systems

This paper demonstrates the potential of inverter-based loads to support grid reliability during power system transients thereby enabling reliable integration of renewable energy in power systems. Such loads are referred to in this paper as grid-supportive loads (GSLs). A new GSL model is developed that simulates the transient response capabilities that can be programmed in electronic loads. The model’s design enables it to be easily integrated in widely used commercial power system transient analysis software. Theoretical expressions are derived that explain the workings of the GSL model. The performance, numerical stability, and impact of the GSL model is validated on 9-bus and 2000-bus synthetic power system models using generator tripping and bus fault disturbances. Results on the 2000 bus system show that in the absence of frequency support from wind/solar generation resources, just 20% of loads with grid-supportive capabilities can improve frequency response by up to 2000 MW/0.1 Hz and reduce deviation in frequency at nadir by up to 60% compared to the situation when GSLs are absent. Power system reliability also improves under fault events. Here, it is further shown that GSLs can aid in integrating more renewable generation without degrading the overall transient response of the power system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1984

Systematic data interpretation of remote sensing in the reception of hydrocarbons, volume 1

The utilization of MSS-LANDSAT and RADAR imagery in the definition of morphostructural anomalies, which are indicative of hydrocarbon entrapment sites in the limit of the Middle and Lower Amazons basins was systemized. The identification and classification of the morphostructural anomalies were accomplished by means of the drainage network interpretation, based on the criteria previously proposed. Thirty anomalies were recognized, being subdivided into twenty domes, two fault controlled domes, six structural depressions, one fault controlled structural depression and one structure developed on a tilted fault block. Many anomalies are not randomly located. Rather, they seem to be aligned according to directions ENE and NNW, suggesting the presence of morphstructural trends in this part of the Amazons Basin. Significant orientations of lineaments were determined through statistical analysis, which defined many regional trends. The directions coincide with morphostructural trends orientations and with the directions of important structures in the Precambrian basement.

Demiranda, F. P.↗
DOE OSTI2024

Unveiling and Mapping Polymorphs in Fluorite Y2TiO5 Using 4D-STEM and Unsupervised Machine Learning

Y2TiO5 belongs to the Ln2TiO5 (Ln = lanthanide or Y) family of ceramic materials and exhibits a range of desirable material properties such as radiation tolerance, frustrated magnetism, and large dielectric constant. However, understanding the complex crystal structure of Y2TiO5 remains elusive, given that Y2TiO5 can adopt multiple polymorphs such as cubic, orthorhombic, and hexagonal phases within the lattice. In this work, we report a detailed structural analysis of Y2TiO5 using four-dimensional scanning transmission electron microscopy coupled with unsupervised machine learning. The pyrochlore nanodomains, characterized by the ordered arrangement of yttrium cations on the A site of their A2BO5 structure, are present within the matrix of a predominantly fluorite-structured Y2TiO5 along with a third polymorph, the hexagonal phase. The pyrochlore phase is found to form 2 nm boundary regions around hexagonal phase stacking faults, highlighting the potential influence of the hexagonal phase on the occurrence and distribution of the pyrochlore phase. Lastly, we identify a unique pyrochlore phase with asymmetric arrangement of cation ordering along a single planar direction. Our findings provide invaluable insights into the possible mechanisms stabilizing pyrochlore nanodomains within the fluorite lattice of Y2TiO5.

36 MATERIALS SCIENCE↗
DOE OSTI2021

TQEA: Temporal Quantum Error Analysis

For the last few years quantum computers have captured researchers’ interest in solving complicated problems in finance, chemistry, machine learning, and many other NP problems. Quantum computing benefits from parallel computation, entanglement, and calculation speedup compared to classical computing. Even though the operations and number of qubits in quantum computers are limited, previous research showed that using quantum computers can be beneficial. These benefits gained researchers’ interest to work on the improvement of quantum computers and overcome the limitations by building more advanced quantum computers with fault tolerance capability, more physical qubits, and better operational gates. In practice, Quantum applications would be translated into Quantum Circuits and each circuit can contain one or many entanglements (s), single qubits operations, and readouts. The importance of running Quantum applications with controlled errors or without errors is critical to the desired result from Quantum readout. In this paper, we study the characteristics of superconducting quantum machines along with the previously proposed methods of Quantum error detection/correction and in order to build a better error model we propose a temporal method for analyzing the the behavior of qubits errors (T1 and T2), frequency of operation, entanglement errors, and readout errors. In order to detect and predict the behavior of each machine, we use simple exponential smoothing analysis on heuristic calibration data. Finally, based on observation, we show that based on frequency, qubits, readout and single operation errors we can build a temporal based model to study and predict the outcome of runs on each Quantum machine.

Baheri, Betis↗
NASA NTRS1973

Analysis of lunar mare geology from Apollo photography

Panoramic and metric photography of the lunar surface from Apollo missions 15, 16, and 17 is the basis for descriptions and interpretations of mare surface features. It is suggested that the formation of mare ridges occurred over an extended period of time rather than in single short episodes of activity through faulting, flexuring, volcanism, and plutonism. Spatial relationships between rilles and ridges suggest they were formed both simultaneously and sequentially. The sinuous rilles may have developed as open lava channels or collapsed lava tubes, while the straight rilles may have been formed by fracturing. It is inferred that small scale volcanism and tectonism have occurred between major flooding episodes.

Young, R. A.↗
NASA NTRS2010

Single Event Test Methodologies and System Error Rate Analysis for Triple Modular Redundant Field Programmable Gate Arrays

We present a test methodology for estimating system error rates of Field Programmable Gate Arrays (FPGAs) mitigated with Triple Modular Redundancy (TMR). The test methodology is founded in a mathematical model, which is also presented. Accelerator data from 90 nm Xilins Military/Aerospace grade FPGA are shown to fit the model. Fault injection (FI) results are discussed and related to the test data. Design implementation and the corresponding impact of multiple bit upset (MBU) are also discussed.

error rate calculations↗
DOE OSTI2025

Reverse martensitic transformation on the corrosion behavior of a 2304 lean duplex stainless steel

This study investigates the influence of the reverse martensitic transformation on the corrosion behavior of 2304 lean duplex stainless steel (LDSS) at low temperatures (400–600°C). The steel underwent cold rolling, followed by isochronal annealing for 0.5 h. Phase transformations and microstructures were analyzed using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Corrosion resistance was evaluated using a syringe cell with cyclic potentiodynamic polarization in 0.6 M NaCl solution and double-loop electrochemical potentiokinetic reactivation in 0.5 M H 2 SO 4 + 0.001 M KSCN solution. A bimodal breakdown potential behavior, associated with either pitting or transpassivity, was observed in the as-received (AR) and samples annealed at 400°C. Pitting in the AR sample was associated with Al–Mg–Si–Ca–O inclusions, while pitting on the samples annealed at 400°C was linked to local reduced passive film resistance. Severe cold rolling enhanced the pitting resistance of 2304 LDSS. Selective electrochemical etching revealed preferential corrosion at phase interfaces and within the austenite phase. Additionally, annealing at 500°C to 600°C led to a marked decrease in pitting resistance and increased sensitization. Electron backscatter diffraction analysis of the corroded pits in the annealed specimens indicated that pits tend to nucleate and grow in α'-martensite/austenite regions. Furthermore, the nanostructure formed during low-temperature reversion, characterized by dislocation-cell martensite with high dislocation density and stacking faults, may adversely affect corrosion resistance due to heterogeneities associated with alloying element redistribution.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Structural interpretations based on ERTS-1 imagery, Bighorn Region, Wyoming-Montana

Structural analysis is being carried out on bands MSS 5 and 7 of scene 1085-17294. Geologic strucutre is primarily revealed in the topographic relief and drainage. Topographic linears are particularly well developed in the bighorn uplift. Many of these occur along known faults and shear zones in the Precambrian core; several have not been previously mapped. These linears, however, do not continue into the younger rocks of the flanks or do so in a much less marked manner than in the core. Linears are far less abundant in the basin or are manifested only in very subtle tonal contrasts and somewhat straight drainage segments. Some of the linears are aligned along trends previously postulated on the basis of surface mapping to be lineaments. The imagery reveals little or no evidence of strike-slip displacements along these lineaments.

Hoppin, R. A.↗
NASA NTRS1983

A portable x-ray analyzer for wearmetal particles in lubricants

An extensive program exists for the systematic sampling and analysis of lubricants in U.S. Air Force aircraft engines. The sudden development of excessive engine wear can usually be detected on the basis of monitoring the concentration of several key metallic elements for each aircraft engine. In many cases even the specific fault within an engine can be recognized. The two types of equipment which are currently being employed for the conduction of oil analyses make use of atomic emission or atomic absorption spectroscopy. In both cases, heavy, large, and relatively fragile pieces of equipment are involved. Difficulties concerning the transportation of these devices have led to the development of a small, sturdy, and easily portable wearmetal analyzer. The analyzer makes use of an X-ray fluorescence technique.

Clark, B. C.↗
NASA NTRS2014

Application of Fault Management Theory to the Quantitive Selection of a Launch Vehicle Abort Trigger Suite

SHM/FM theory has been successfully applied to the selection of the baseline set Abort Triggers for the NASA SLS center dot Quantitative assessment played a useful role in the decision process  M&FM, which is new within NASA MSFC, required the most "new" work, as this quantitative analysis had never been done before center dot Required development of the methodology and tool to mechanize the process center dot Established new relationships to the other groups  The process is now an accepted part of the SLS design process, and will likely be applied to similar programs in the future at NASA MSFC  Future improvements center dot Improve technical accuracy ‒Differentiate crew survivability due to an abort, vs. survivability even no immediate abort occurs (small explosion with little debris) ‒Account for contingent dependence of secondary triggers on primary triggers ‒Allocate "Δ LOC Benefit" of each trigger when added to the previously selected triggers. center dot Reduce future costs through the development of a specialized tool  Methodology can be applied to any manned/unmanned vehicle, in space or terrestrial

Lo, Yunnhon↗
NASA NTRS2003

Applying Model-Based Reasoning to the FDIR of the Command and Data Handling Subsystem of the International Space Station

All of the International Space Station (ISS) systems which require computer control depend upon the hardware and software of the Command and Data Handling System (C&DH) system, currently a network of over 30 386-class computers called Multiplexor/Dimultiplexors (MDMs)[18]. The Caution and Warning System (C&W)[7], a set of software tasks that runs on the MDMs, is responsible for detecting, classifying, and reporting errors in all ISS subsystems including the C&DH. Fault Detection, Isolation and Recovery (FDIR) of these errors is typically handled with a combination of automatic and human effort. We are developing an Advanced Diagnostic System (ADS) to augment the C&W system with decision support tools to aid in root cause analysis as well as resolve differing human and machine C&DH state estimates. These tools which draw from sources in model-based reasoning[ 16,291, will improve the speed and accuracy of flight controllers by reducing the uncertainty in C&DH state estimation, allowing for a more complete assessment of risk. We have run tests with ISS telemetry and focus on those C&W events which relate to the C&DH system itself. This paper describes our initial results and subsequent plans.

Robinson, Peter↗