Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Volcanoes and global catastrophes

The search for a single explanation for global mass extinctions has let to polarization and the controversies that are often fueled by widespread media attention. The historic record shows a roughly linear log-log relation between the frequency of explosive volcanic eruptions and the volume of their products. Eruptions such as Mt. St. Helens 1980 produce on the order of 1 cu km of tephra, destroying life over areas in the 10 to 100 sq km range, and take place, on the average, once or twice a decade. Eruptions producing 10 cu km take place several times a century and, like Krakatau 1883, destroy life over 100 to 1000 sq km areas while producing clear global atmospheric effects. Eruptions producting 10,000 cu km are known from the Quaternary record, and extrapolation from the historic record suggests that they occur perhaps once in 20,000 years, but none has occurred in historic time and little is known of their biologic effects. Even larger eruptions must also exist in the geologic record, but documentation of their volume becomes increasingly difficult as their age increases. The conclusion is inescapable that prehistoric eruptions have produced catastrophes on a global scale: only the magnitude of the associated mortality is in question. Differentiation of large magma chambers is on a time scale of thousands to millions of years, and explosive volcanoes are clearly concentrated in narrow belts near converging plate margins. Volcanism cannot be dismissed as a producer of global catastrophes. Its role in major extinctions is likely to be at least contributory and may well be large. More attention should be paid to global effects of the many huge eruptions in the geologic record that dwarf those known in historic time.

Simkin, Tom↗

Flutter of a Low-Aspect-Ratio Rectangular Wing

A flutter test of a low-aspect-ratio rectangular wing was conducted in the Langley Transonic Dynamics Tunnel (TDT). The model used in this flutter test consisted of a rigid wing mounted to the wind-tunnel wall by a flexible, rectangular beam. The flexible support shaft was connected to the wing root and was cantilever mounted to the wind-tunnel wall. The wing had an aspect ratio of 1.5 based on the wing semispan and an NACA 64A010 airfoil shape. The flutter boundary of the model was determined for a Mach number range of 0.5 to 0.97. The shape of the transonic flutter boundary was determined. Actual flutter points were obtained on both the subsonic and supersonic sides of the flutter bucket. The model exhibited a deep transonic flutter bucket over a narrow range of Mach number. At some Mach numbers, the flutter conditions were extrapolated using a subcritical response technique. In addition to the basic configuration, modifications were made to the model structure such that the first bending frequency was changed without significantly affecting the first torsion frequency. The experiment showed that increasing the bending stiffness of the model support shaft through these modifications lowered the flutter dynamic pressure. Flutter analysis was conducted for the basic model as a comparison with the experimental results. This flutter analysis was conducted with subsonic lifting-surface (kernel function) aerodynamics using the k method for the flutter solution.

Cole, Stanley R.↗

Advanced computational techniques for hypersonic propulsion

Computational Fluid Dynamics (CFD) has played a major role in the resurgence of hypersonic flight, on the premise that numerical methods will allow performance of simulations at conditions for which no ground test capability exists. Validation of CFD methods is being established using the experimental data base available, which is below Mach 8. It is important, however, to realize the limitations involved in the extrapolation process as well as the deficiencies that exist in numerical methods at the present time. Current features of CFD codes are examined for application to propulsion system components. The shortcomings in simulation and modeling are identified and discussed.

Povinelli, Louis A.↗

Recent developments in deployment analysis simulation using a multi-body computer code

Deployment is a candidate mode for construction of structural space systems components. By its very nature, deployment is a dynamic event, often involving large angle unfolding of flexible beam members. Validation of proposed designs and conceptual deployment mechanisms is enhanced through analysis. Analysis may be used to determine member loads thus helping to establish deployment rates and deployment control requirements for a given concept. Futhermore, member flexibility, joint free-play, manufacturing tolerances, and imperfections can affect the reliability of deployment. Analyses which include these effects can aid in reducing risks associated with a particular concept. Ground tests which can play a similar role to that of analyses are difficult and expensive to perform. Suspension systems just for vibration ground tests of large space structures in a 1 g environment present many challenges. Suspension of a structure which spatially expands is even more challenging. Analysis validation through experimental confirmation on relatively small simple models would permit analytical extrapolation to larger more complex space structures.

Housner, Jerrold M.↗

Simulation studies of improved sounding systems

Two instrument designs for indirect satellite sounding of the atmosphere in the infrared are represented by the High Resolution Infra-Red Sounder, Model 2 (HIRS-2) and by the Advanced Meteorological Temperature Sounder (AMTS). The relative capabilities of the two instruments were tested by simulating satellite measurements from a group of temperature soundings, allowing the two participants to retrieve the temperature profiles from the simulated data, and comparing the results with the original temperature profiles. Four data sets were produced from radiosondes data extrapolated to a suitable altitude, representing continents and oceans, between 30S and 30N. From the information available, temperature profiles were retrieved by two different methods, statistical regression and inversion of the radiative transfer equation. Results show the consequence of greater spectral purity, concomitant increase in the number of spectral intervals, and the better spatial resolution in partly clouded areas. At the same time, the limitation of the HIRS-2 without its companion instrument leads to some results which should be ignored in comparing the two instruments. A clear superiority of AMTS results is shown.

Yates, H.↗

Toward an electrical power utility for space exploration

Plans for space exploration depend on today's technology programs addressing the novel requirements of space-based enterprise. The requirements for electrical power will be formidable: megawatts in magnitude, reliability for multi-year missions and the flexibility to adapt to needs unanticipated at design time. The reasons for considering the power management and distribution in the various systems from a total mission perspective, rather than simply extrapolating current spacecraft design practice, are discussed. A utility approach to electric power being developed at the Lewis Research Center is described. It integrates requirements from a broad selection of current development programs with studies in which both space and terrestrial technologies are conceptually applied to exploration mission scenarios.

Bercaw, Robert W.↗

Tungsten fiber reinforced copper matrix composites: A review

Tungsten fiber reinforced copper matrix (W/Cu) composites have served as an ideal model system with which to analyze the properties of metal matrix composites. A series of research programs were conducted to investigate the stress-strain behavior of W/Cu composites; the effect of fiber content on the strength, modulus, and conductivity of W/Cu composites; and the effect of alloying elements on the behavior of tungsten wire and of W/Cu composites. Later programs investigated the stress-rupture, creep, and impact behavior of these composites at elevated temperatures. Analysis of the results of these programs as allows prediction of the effects of fiber properties, matrix properties, and fiber content on the properties of W/Cu composites. These analyses form the basis for the rule-of-mixtures prediction of composite properties which was universally adopted as the criteria for measuring composite efficiency. In addition, the analyses allows extrapolation of potential properties of other metal matrix composites and are used to select candidate fibers and matrices for development of tungsten fiber reinforced superalloy composite materials for high temperature aircraft and rocket engine turbine applications. The W/Cu composite efforts are summarized, some of the results obtained are described, and an update is provided on more recent work using W/Cu composites as high strength, high thermal conductivity composite materials for high heat flux, elevated temperature applications.

Mcdanels, David L.↗

High-energy particles very near the sun

NASA's long range plans include a Solar Probe (Star Probe) mission in which a spacecraft is placed in an eccentric orbit with perihelion at four solar radii. As part of the study effort for this mission, a Solar Probe Environment Workshop was sponsored by JPL. The report of this committee was issued in September 1978 as JPL Publication 78-64. A brief abstract of this document is given. There are considerable uncertainties in the models of solar energetic particle release and transport. The committee addressed this problem by using different modelling techniques when possible to provide a cross-check on the estimates. These models were used to extrapolate observation at 1 AU to the vicinity of the Sun. Additionally, the occurrence of a flare of a given magnitude must be estimated on a statistical basis. Therefore, it is possible to state a likelihood that the fluxes and fluences will be less than a certain magnitude, but in the event of an extremely large solar flare (occurrence of perhaps once a decade, e.g., August 4, 1972) it is likely that the hazard would be insurmountable. A brief first look indicates that the near-solar particle environment is not a worse hazard than Jupiter.

Goldstein, B. E.↗

Dehydration kinetics of shocked serpentine

Experimental rates of dehydration of shocked and unshocked serpentine were determined using a differential scanning calorimetric technique. Dehydration rates in shocked serpentine are enhanced by orders of magnitude over corresponding rates in unshocked material, even though the impact experiments were carried out under conditions that inhibited direct impact-induced devolatilization. Extrapolation to temperatures of the Martian surface indicates that dehydration of shocked material would occur 20 to 30 orders of magnitude more rapidly than for unshocked serpentine. The results indicate that impacted planetary surfaces and associated atmospheres would reach chemical equilibrium much more quickly than calculations based on unshocked material would indicate, even during the earliest, coldest stages of accretion. Furthermore, it is suggested that chemical weathering of shocked planetary surfaces by solid-gas reactions would be sufficiently rapid that true equilibrium mineral assemblages should form.

Tyburczy, James A.↗

The solar origin of long-term variations of the interplanetary magnetic field strength

Using simple models for the coronal field structure, the spacecraft observations of the photospheric field during sunspot cycle 21 were extrapolated for the purpose of modeling quantitatively the long-term behavior of the IMF during the sunspot cycle 21. Results were compared with the measurements of the radial component of the IMF at earth. The results indicate that the solar source of the IMF can be represented to a first approximation by the dipole component of the photospheric field, whose axis is nearly perpendicular to the ecliptic plane around sunspot minimum, but tilts more strongly toward it around sunspot maximum. It was also found that the average radial IMF strength varies with heliographic latitude; around sunspot minimum, the radial IMF is expected to be roughly twice as strong above the sun's poles as near the ecliptic plane. The average strength of the photospheric field above latitude 55 deg is about 10 G around sunspot minimum.

Wang, Y.-M.↗

Confusion-limited galaxy fields. I - Simulated optical and near-infrared images

Techniques for simulating images of galaxy fields are presented that extend to high redshifts and a surface density of galaxies high enough to produce overlapping images. The observed properties of galaxies and galaxy-ensembles in the 'local' universe are extrapolated to high redshifts using reasonable scenarios for the evolution of galaxies and their spatial distribution. This theoretical framework is then employed with Monte Carlo techniques to create fairly realistic two-dimensional distributions of galaxies plus optical and near-infrared sky images in a variety of model universes, using the appropriate density, luminosity, and angular size versus redshift relations.

Chokshi, Arati↗

Absorption spectra of Fe I in the 1550-3215-A region

The high-dispersion absorption spectrum of Fe I is reported in the 1550-3215-A region. Included are wavelengths of about 3000 observed spectral features, improved spectral assignments, 248 new energy levels, and a value for the ionization potential of 63 737/cm obtained from extrapolation of Rydberg series. Improved wavelengths for several hundred V I and Ti I spectral lines determined on the same spectrograms as the iron data also are presented.

Brown, C. M.↗

Nonadiabatic, momentum-dependent, and energy-dependent corrections in the effective-potential description for low-energy scattering of spinless systems - Their relations and validity

In the effective-potential description for low-energy scattering involving a spinless complex (a body with internal structure), the nonadiabatic corrections are sometimes disguised in momentum-dependent terms. These are distinct from energy-dependent corrections. A general procedure is given here by which all the momentum-dependent corrections can be converted into nonadiabatic corrections in truly local form. Circumstances under which an expansion of the effective potential, in terms of the adiabatic term plus nonadiabatic and energy-dependent corrections is allowed and forbidden, are discussed. An example for the latter is in the case of near degeneracy in the spectrum of the complex or in the extrapolation of the effective potential to short-distance behavior. This indicates that certain claims of 'saturation effect' at short distances in low-energy electron-atom scattering are invalid.

Au, C. K.↗

On the evolution of globular cluster systems. I - Present characteristics and rate of destruction in our Galaxy

The current dynamic state and rate of destruction for the system of globular clusters in the Galaxy are modeled. It is found that gravitational shocks due to the central bulge of the Galaxy are very efficient in destroying clusters on highly radial orbits. This effect, extrapolated at the present unweighted destruction rate over 10 to the 10th yr, can account for the observed difference between the velocity distribution of globular clusters and other tracers of the halo population.

Aguilar, Luis↗

Intrinsic oxygen fugacity measurements of some Allende Type B inclusions

The intrinsic oxygen fugacities (IOFs) of two type B Ca-rich and Al-rich inclusions (CAI) from the Allende meteorite were measured using the solid-electrolyte double-cell IOF technique of Ulmer et al. (1976). The measurements were compared to calculated and experimentally extrapolated fO2 of type B phases. It was found that the IOFs of the type B are 6-8 orders of magnitude more oxidized (H2/H2O = 1-10) than the canonical solar nebular gas (H2/H2O = 100-2000). It is suggested that some local fO2 enhancing mechanism, such as dust or gas concentrations, or the release of oxygen-rich vapors during CAI volatilization in the type B inclusions was in operation at temperatures higher than 700 C.

Kozul, Jean M.↗

Quadrature methods for periodic singular and weakly singular Fredholm integral equations

High-accuracy numerical quadrature methods for integrals of singular periodic functions are proposed. These methods are based on the appropriate Euler-Maclaurin expansions of trapezoidal rule approximations and their extrapolations. They are subsequently used to obtain accurate quadrature methods for the solution of singular and weakly singular Fredholm integral equations. Throughout the development the periodic nature of the problem plays a crucial role. Such periodic equations are used in the solution of planar elliptic boundary value problems such as those that arise in elasticity, potential theory, conformal mapping, and free surface flows. The use of the quadrature methods is demonstrated with numerical examples.

Sidi, Avram↗

Rarefied-flow aerodynamics measurement experiment on the aeroassist flight experiment

The rarefied-flow aerodynamics measurement experiment, which is expected to measure the rarefied-flow flight regime with an accelerometer on the aeroassist flight experiment, is discussed. The experiment concept and mission plans are examined and the experiment configuration is illustrated. The experiment plans include flight measurements of aerodynamic force and moment coefficients throughout the rarefied regime to verify ground-to-flight extrapolation techniques. In addition, the experiment includes the study of acceleration rates and the effects of attitude variation. The experiment is also expected to evaluate the determination of vehicle mass properties to study robust control theory formulations which are applicable to special return aeroassisted orbital transfer vehicle payloads.

Blanchard, R. C.↗

Oxidation of silicon with a 5 eV O(-) beam

A silicon wafer has been oxidized at room temperature in vacuum using a pure, ground-state beam of O(-) ions. The beam was of sufficiently low energy that no displacement damage or implantation was energetically possible. The resulting SiO2 films were analyzed with X-ray photoelectron spectroscopy. A logarithmic dependence of oxide thickness on dose was observed, with an extrapolated oxidation efficiency of unity for the clean silicon surface. A distinct initial oxidation phase was observed, with an anomalously high level of silicon suboxides. In addition, the valence-band offset between the silicon and the oxide was unusually small, suggesting a large interfacial dipole.

Hecht, M. H.↗