Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Detection of interplanetary electrons from 18 keV to 1.8 MeV during solar quiet times, 1. On the origin of 200 KeV interplanetary electrons, 2.

A quiet time component of interplanetary electrons having energies above solar wind energies and below those characterized as cosmic radiation was observed. Its energy spectrum falls with energy from 18 keV to 1.8 MeV, but it shows a feature in the 100 to 300 keV range. The observed temporal variations of the intensity suggest that the 18 to 100 keV portion is solar and the 0.3 to 1.8 MeV portion is galactic in origin. Solar and terrestrial neutron decay electrons appear inadequate to explain the 100 to 300 keV feature.

Lin, R. P.↗

Effect of cooler electrons on a compressive ion acoustic solitary wave in a warm ion plasma — Forbidden regions, double layers, and supersolitons

It is observed that the presence of a minority component of cooler electrons in a three component plasma plays a deterministic role in the evolution of solitary waves, double layers, or the newly discovered structures called supersolitons. The inclusion of the cooler component of electrons in a single electron plasma produces sharp increase in nonlinearity in spite of a decrease in the overall energy of the system. The effect maximizes at certain critical value of the number density of the cooler component (typically 15%–20%) giving rise to a hump in the amplitude variation profile. For larger amplitudes, the hump leads to a forbidden region in the ambient cooler electron concentration which dissociates the overall existence domain of solitary wave solutions in two distinct parameter regime. It is observed that an inclusion of the cooler component of electrons as low as < 1% affects the plasma system significantly resulting in compressive double layers. The solution is further affected by the cold to hot electron temperature ratio. In an adequately hotter bulk plasma (i.e., moderately low cold to hot electron temperature ratio), the parameter domain of compressive double layers is bounded by a sharp discontinuity in the corresponding amplitude variation profile which may lead to supersolitons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Attachment to Molecules at Low Electron Energies

One of the most efficient ways of producing negative ions is by the process of dissociative electron attachment to molecules. Here, a diatomic or polyatomic molecule dissociates, by the impact of a low energy electron, into component atoms (or smaller molecular species) while the incident electron attaches itself to one of the dissociating fragments.

Fadeev Equation↗

Critical material content in modern conventional U.S. vehicle electronics

Critical materials (CM) are vital to modern technology. Components of modern vehicles can be recycled to recover and reuse the CMs to help ensure a supply of these materials. Electronic components from a 2015 GMC Sierra truck (21 components) and 2016 Toyota Camry sedan (10 components) were analyzed for CMs. The components were processed via size reduction, aqua regia leaching and dissolution, and final solutions were analyzed for metal content. It was found that most electronic components of both vehicles contain CM. The most concentrated CM in the components were Sn, Nb, and Tb. Nd and Co were found in several of the magnetic components. CM economic value was found to be low compared to the overall value of the components, and the CM content would not allow for a viable pathway for recycling. Remanufacturing of components may be a more economic option of reuse in the future.

2015 GMC Sierra↗

Lunar Nuclear Reactor Neutron Fluence and Gamma Dose Estimates

NASA aims to deploy a fission reactor on the lunar surface by 2030 to generate 100 kWe of power for at least 10 years without maintenance or refueling. To assess system and subsystem survivability according to those requirements, a model of the reactor pallet was created in the radiation transport code MCNP to determine the neutron fluences and gamma doses that the materials and systems would be exposed to. The model was based on the 2025 government design. The model indicated that the control drum motors, Brayton cycle engines, and pipes and valves would be exposed to neutron fluences of 1×10 15 – 1×10 16 n/cm 2 per year and gamma doses ranging from 10 to 500 Mrad per year. The electronics box housing the instrumentation and control elements is expected to receive 1×10 14 – 1×10 15 n/cm 2 per year and gamma doses in the range of 1–5 Mrad per year. These doses necessitate that the control drum motors, Brayton cycle engines, valve components, control electronics, and other components be radiation-hardened (>10 16 n/cm 2 and >10 Mrad gamma dose) or additionally shielded to survive the 10-year lunar mission.

Radiation-Hardened Materials↗

Hydrogen-bond Specific Materials Modification in Group IV Semiconductors

Semiconductor dielectric crystals consist of two fundamental components: lattice atoms and electrons. The former component provides a crystalline structure that can be disrupted by various defects or the presence of an interface, or by transient oscillations known as phonons. The latter component produces an energetic structure that is responsible for the optical and electronic properties of the material, and can be perturbed by lattice defects or by photo-excitation. Over the period of this project, August 15, 1999 to March 31, 2015, a persistent theme has been the elucidation of the fundamental role of defects arising from the presence of radiation damage, impurities (in particular, hydrogen), localized strain or some combination of all three. As our research effort developed and evolved, we have experienced a few title changes, which reflected this evolution. Throughout the project, ultrafast lasers usually in a pump-probe configuration provided the ideal means to perturb and study semiconductor crystals by both forms of excitation, vibrational (phonon) and electronic (photon). Moreover, we have found in the course of this research that there are many interesting and relevant scientific questions that may be explored when phonon and photon excitations are controlled separately. Our early goals were to explore the dynamics of bond-selective vibrational excitation of hydrogen from point defects and impurities in crystalline and amorphous solids, initiating an investigation into the behavior of hydrogen isotopes utilizing a variety of ultrafast characterization techniques, principally transient bleaching spectroscopy to experimentally obtain vibrational lifetimes. The initiative could be divided into three related areas: (a) investigation of the change in electronic structure of solids due to the presence of hydrogen defect centers, (b) dynamical studies of hydrogen in materials and (c) characterization and stability of metastable hydrogen impurity states under transient compression. This research focused on the characterization of photon and ion stimulated hydrogen related defect and impurity reactions and migration in solid state matter, which requires a detailed understanding of the rates and pathways of vibrational energy flow, of the transfer channels and of the coupling mechanisms between local vibrational modes (LVMs) and phonon bath as well as the electronic system of the host material. It should be stressed that researchers at Vanderbilt and William and Mary represented a unique group with a research focus and capabilities for low temperature creation and investigation of such material systems. Later in the program, we carried out a vigorous research effort addressing the roles of defects, interfaces, and dopants on the optical and electronic characteristics of semiconductor crystals, using phonon generation by means of ultrafast coherent acoustic phonon (CAP) spectroscopy, nonlinear characterization using second harmonic generation (SHG), and ultrafast pump-and-probe reflectivity and absorption measurements. This program featured research efforts from hydrogen defects in silicon alone to other forms of defects such as interfaces and dopant layers, as well as other important semiconducting systems. Even so, the emphasis remains on phenomena and processes far from equilibrium, such as hot electron effects and travelling localized phonon waves. This program relates directly to the mission of the Department of Energy. Knowledge of the rates and pathways of vibrational energy flow in condensed matter is critical for understanding dynamical processes in solids including electronically, optically and thermally stimulated defect and impurity reactions and migration. The ability to directly probe these pathways and rates allows tests of theory and scaling laws at new levels of precision. Hydrogen embedded in model crystalline semiconductors and metal oxides is of particular interest, since the associated local mode can be excited cleanly, and is usually well-separated in energy from the phonon bath. These basic dynamical studies have provided new insights for example into the fundamental mechanisms that control proton diffusion in these oxides. This area of materials science has largely fulfilled its promise to identify degradation mechanisms in electronic and optoelectronic devices, and to advance solid oxide proton conductors for fuel cells, gas sensors and proton-exchange membrane applications. It also provides the basis for innovations in materials synthesis involving atomic-selective diffusion and desorption.

36 MATERIALS SCIENCE↗

Environments stressful to optical materials in low earth orbit

Spacecraft in low earth orbit experience a variety of environments which are potentially damaging to materials and to optical systems including electronic controls and components. The low earth orbit (typically 400 km) has a significantly different set of environments than higher orbits. The environments vary not only with altitude but also with inclination. This paper deals with the environment that the Space Station Freedom will experience and with some of the effects on the materials and electronic components that will comprise the optical systems on the station. Specific optical systems are not addressed but the information presented is general and does apply to optical systems.

Musikant, S.↗

Analytic model of electron transport through and over non-linear barriers

Tunneling barriers are an essential component of electron sources, sensors, detectors, and vacuum nanoelectronics, and a pivotal factor in their performance, but the barriers themselves routinely depart from the analytic models used to model their behavior. Here, a new formalism is developed to analytically and accurately model emission through and over barriers associated with depletion layers, nanotip barriers, and MIM structures. The transmission probability for depletion layer and metal-insulator-metal (MIM) and metaloxide-semiconductor (MOS) barriers is accurately modeled as the electron energy exceeds the barrier height using approaches designed for rapid implementation demanded by simulation codes, and extensible to general barriers. The models supersede conventional thermal and field models in depletion and MIM/MOS barrier studies. Thermal-field methods are used to treat the transmission probability, and shape factor methods to treat the tunneling factor. Analytic formulae for current density are obtained. The methods ease device simulation and characterization of current-voltage relations for emerging technologically interesting barriers with better accuracy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extreme high vacuum for polarized electron sources

Nuclear physics experiments often require highly polarized electron beams to do precise measurements of the structure and size of nucleons and the nucleus, as well as for searches for physics beyond the standard model. Jefferson Lab?s electron source, with polarization near 90%, has been providing polarized electron beams for CEBAF for over two decades. Development is underway for polarized electron sources at MESA at Mainz and the Electron Ion Collider at Brookhaven National Lab, and there is potential for polarized electron beam in the future at facilities including the International Linear Collider, an electron upgrade at CERN, and the SuperKEKB collider in Japan. At Jefferson Lab there are even plans to make use of polarized electrons to make a polarized positron source for experimental nuclear physics. High polarization electron beams are generated using photoemission from strained superlattice GaAs based photocathodes, and photocathode lifetime is limited by the ionization of residual gas in the system, which is then accelerated into the photocathode. Extreme high vacuum (near 1x10-10 Pa) is required to operate the Jefferson Lab polarized electron source with an acceptable lifetime, and the upcoming projects will need various combinations of higher current, higher bunch charge and longer photocathode lifetimes. To meet the vacuum requirements for polarized electron sources, every component for a polarized electron source must be optimized, including chamber materials, pumps, bakeout procedure and the high voltage electrode geometry and processing. Each change in these components must be evaluated offline before being used in the accelerator, and effects on pressure are difficult to evaluate even using XHV-optimized hot filament ionization gauges. In fact, we do not get a final evaluation of system modifications until an electron source is built, installed and lifetime measurements are made over the course of months or years of operation. I will be discussing the evolution of vacuum in the Jefferson Lab polarized source system toward XHV pressures and discuss the characterization and limitations measured for commercially available XHV vacuum gauges. Finally, I?ll present the effect of system pressure on photocathode lifetime and highlight how XHV pressure standards can benefit the ongoing efforts to improve vacuum for the next generation of polarized electron sources.

Stutzman, Marcy↗

Extension Model: Diamond Phenolic EOS

The procedure for performing an equation of state extension is purely based on the simple assertion that one can break the standard equation of state (EOS) into a three component free energy. The three components are made of a cold curve, ion thermal, and electron thermal part. Assuming that the standard products EOS does not contain an electron thermal component, we only need to extract the cold curve and ion component. The following is a description on how I extracted the two components and extended the tables over the full SESAME density and temperature grids while preserving the limited range table.

36 MATERIALS SCIENCE↗

Remote measurement of the water content of snowpacks

Electronic equipment for sensing moisture content of snowpacks is described. Components of electronic test equipment are illustrated and methods of conducting tests are explained. Possibilities for airborne sensing are examined.

Linlor, W. I.↗

Magnetospheric Multiscale Observations of Electron Vortex Magnetic Hole in the Turbulent Magnetosheath Plasma

We report on the observations of an electron vortex magnetic hole corresponding to a new type of coherent structure in the turbulent magnetosheath plasma using the Magnetospheric Multiscale mission data. The magnetic hole is characterized by a magnetic depression, a density peak, a total electron temperature increase (with a parallel temperature decrease but a perpendicular temperature increase), and strong currents carried by the electrons. The current has a dip in the core region and a peak in the outer region of the magnetic hole. The estimated size of the magnetic hole is about 0.23 ρ {sub i} (∼30 ρ {sub e}) in the quasi-circular cross-section perpendicular to its axis, where ρ {sub i} and ρ {sub e} are respectively the proton and electron gyroradius. There are no clear enhancements seen in high-energy electron fluxes. However, there is an enhancement in the perpendicular electron fluxes at 90° pitch angle inside the magnetic hole, implying that the electrons are trapped within it. The variations of the electron velocity components V {sub em} and V {sub en} suggest that an electron vortex is formed by trapping electrons inside the magnetic hole in the cross-section in the M – N plane. These observations demonstrate the existence of a new type of coherent structures behaving as an electron vortex magnetic hole in turbulent space plasmas as predicted by recent kinetic simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy conversion and transfer for plasmas in a magnetic expansion configuration

A two-dimensional axisymmetric particle-in-cell code with Monte Carlo collision conditions has been used to study particle energy transfer in plasmas and conversion in applied magnetic and electric fields appropriate to coaxial acceleration. The research incorporates a computation scheme with: a model of single particle magnetic interactions; a model of single particle interactions in electric and magnetic fields; and a model of multi-particle collisional interactions in order to understand the energy transfer processes and conversion mechanisms of charged plasma particles. This approach predicts electron and ion motions along with their energy variations for physical conditions that occur in the related models; the results allow comparison with experimental data for magnetic field strengths of 0.01–0.05 T and electrode voltages of 22.0–32.0 V. With the incorporation of magnetic and electric field effects on charged particles, the multi-particle model includes electron-neutral ionization collisions, ion-neutral charge exchange collisions, and electron-ion Coulomb collisions. This research presents a new approach to achieve an underlying understanding of the plasma energy transfer and conversion in the external electric and magnetic fields that is not possible using magnetohydrodynamics continuum representations. Results indicate the following innovative conclusions: (1) Radial and azimuthal energies of magnetized electrons are converted into an axial electron energy component in the diverging magnetic field, and the azimuthal kinetic energy of unmagnetized ions is converted into axial and radial components. (2) In electric and magnetic fields, electric field energy is primarily converted into axial kinetic energy of magnetized electrons by the energy transformation effects of magnetic fields, and for unmagnetized ions, the radial kinetic energy component dominates in the conversion of electric field energy. (3) For the collisional plasma, electron kinetic energy tends to increase (or decrease) to a terminal value since electrons lose energy in collisions then gain energy again from the field. Ions acquire most energy directly from the electric field, although part of the electric field energy arrives to the ions by collisions. Further, the ion axial energy component dominates the total ion energy. The collision processes are found to be integral and essential for the conversion of the plasma non-directed energy gain to be converted into the resultant axial energy, the magnitudes of which are found to be in agreement with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Electrical Materials and Components Being Developed

All aerospace systems require power management and distribution (PMAD) between the energy and power source and the loads. The PMAD subsystem can be broadly described as the conditioning and control of unregulated power from the energy source and its transmission to a power bus for distribution to the intended loads. All power and control circuits for PMAD require electrical components for switching, energy storage, voltage-to-current transformation, filtering, regulation, protection, and isolation. Advanced electrical materials and component development technology is a key technology to increasing the power density, efficiency, reliability, and operating temperature of the PMAD. The primary means to develop advanced electrical components is to develop new and/or significantly improved electronic materials for capacitors, magnetic components, and semiconductor switches and diodes. The next important step is to develop the processing techniques to fabricate electrical and electronic components that exceed the specifications of presently available state-of-the-art components. The NASA Glenn Research Center's advanced electrical materials and component development technology task is focused on the following three areas: 1) New and/or improved dielectric materials for the development of power capacitors with increased capacitance volumetric efficiency, energy density, and operating temperature; 2) New and/or improved high-frequency, high-temperature soft magnetic materials for the development of transformers and inductors with increased power density, energy density, electrical efficiency, and operating temperature; 3) Packaged high-temperature, high-power density, high-voltage, and low-loss SiC diodes and switches.

Schwarze, Gene E.↗

Multi Wave Link: An interactive database for co-ordination of multiwavelength programs

Multi Wave Link is an operational database used by the international astronomical community to plan and coordinate multiwavelength observational campaigns on various celestial objects. This facility has been and continues to be an essential tool for the organization of numerous simultaneous ground-based and satellite observations. The Multi Wave Link system has both an interactive component and an electronic mail alert notice component. The interactive portion contains a database of schedules from several of the world's larger observatories and orbiting satellites. Lists of observers, observatories, and their available instrumentation are additionally contained in the system. Another feature added to the software allows the user to search the Royal Greenwich Observatory e-mail listing of international astronomers. This capability is often used by astronomers to find the electronic address of colleagues for improved communication. However, the most productive aspect of the Multi Wave Link system appears to be one of the simplest parts of the system: the electronic mail alert notices for observing campaigns. Information useful in planning the structure of future astronomical databases can be obtained by studying patterns of use of the Multi Wave Link system. This paper analyzes 22 months of Multi Wave Link usage from Sep. 1991 - Jul. 1993.

Cordova, France↗

Coherent terahertz radiation from high-harmonic component of modulated free-electron beam in a tapered two-asymmetric grating structure

Based on the mechanism of incoherent diffraction radiation excited by an electron bunch in a waveguide with periodic structure, this paper presents the concept of coherent terahertz (THz) radiation from the high-harmonic component of a modulated free-electron beam in a tapered two-asymmetric grating structure. The results show that in this mechanism 0.43 THz radiation can be generated with 10 A/cm{sup 2} current density, and the efficiency can reach 0.5%. Because of the low required current density and relative high efficiency, this concept shows the application potential for electron-beam-driven terahertz sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Systems for Proposed Anti-Proton Source Accumulator Core Betatron Systems

New waveguide pickups and kickers have been proposed for the accumulator core betatron systems. With new waveguide components, the electronics of the system have to be redesigned. The waveguide components have new frequency bands and power concerns that have to be addressed. This paper discusses the calculations used to design the new electronic system, and it also discusses the practical concerns of the electronic hardware.

43 PARTICLE ACCELERATORS↗

Characterization of intense laser-produced fast electrons using hard x-rays via bremsstrahlung

For this research, energy distribution of high-power, short-pulse laser produced fast electrons was experimentally and numerically studied using high-energy bremsstrahlung x-rays. The hard x-ray photons and escaping electrons from various metal foils, irradiated by the 50 TW Leopard laser at Nevada Terawatt Facility, were recorded with a differential filter stack spectrometer that is sensitive to photons produced by mainly 0.5–2 MeV electrons and an electron spectrometer measuring >2 MeV electrons. The experimental bremsstrahlung and the slope of the measured escaped electrons were compared with an analytic calculation using an input electron spectrum estimated with the ponderomotive scaling. The result shows that the electron spectrum entering a Cu foil could be continuous single slope with the slope temperature of ~1.5 MeV in the detector range. The experiment and analytic calculation were then compared with a 2D particle-in-cell code, PICLS, including a newly developed radiation transport module. The simulation shows that a two-temperature electron distribution is generated at the laser interaction region, but only the hot component of the fast electrons flow into the target during the interaction because the low energy electron component is trapped by self-generated magnetic field in the preformed plasma. Finally, a significant amount of the photons less than 100 keV observed in the experiment could be attributed to the low energy electrons entering the foil a few picoseconds later after the gating field disappears.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗