Results for “design challenges” — Page 64

NASA NTRS1998

Variable Complexity Structural Optimization of Shells

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-1808 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition several modeling issues for the design of shells of revolution were studied.

Haftka, Raphael T.↗

NASA NTRS1999

Variable Complexity Structural Optimization of Shells

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-2110 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition, several modeling issues for the design of shells of revolution were studied.

Haftka, Raphael T.↗

NASA NTRS2010

Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems. Part 1, Bulk Phase: Bulk Phase - Part 1

The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the mid 1980s, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in open, semi-closed and closed loop life support system. The biofilm and biodeterioration studies that were performed during the design and test periods will be presented in a future publication.

Roman, Monsi C.↗

NASA NTRS2010

Overview of Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems

The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the late 1980's, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in the design of a closed loop life support system.

Roman, Monsi C.↗

NASA NTRS2011

Integration of Multifidelity Multidisciplinary Computer Codes for Design and Analysis of Supersonic Aircraft

This paper documents the development of a conceptual level integrated process for design and analysis of efficient and environmentally acceptable supersonic aircraft. To overcome the technical challenges to achieve this goal, a conceptual design capability which provides users with the ability to examine the integrated solution between all disciplines and facilitates the application of multidiscipline design, analysis, and optimization on a scale greater than previously achieved, is needed. The described capability is both an interactive design environment as well as a high powered optimization system with a unique blend of low, mixed and high-fidelity engineering tools combined together in the software integration framework, ModelCenter. The various modules are described and capabilities of the system are demonstrated. The current limitations and proposed future enhancements are also discussed.

Geiselhart, Karl A.↗

NASA NTRS2016

Trajectory Design Tools for Libration and Cis-Lunar Environments

Innovative trajectory design tools are required to support challenging multi-body regimes with complex dynamics, uncertain perturbations, and the integration of propulsion influences. Two distinctive tools, Adaptive Trajectory Design and the General Mission Analysis Tool have been developed and certified to provide the astrodynamics community with the ability to design multi-body trajectories. In this paper we discuss the multi-body design process and the capabilities of both tools. Demonstrable applications to confirmed missions, the Lunar IceCube Cubesat lunar mission and the Wide-Field Infrared Survey Telescope (WFIRST) Sun-Earth L2 mission, are presented.

Earth-Moon↗

NASA NTRSDate not supplied

NASA Advanced Space Suit xEMU Development Report – Hard Upper Torso (HUT)

For the past several years, the Exploration Extra-Vehicular Mobility Unit (xEMU) team at NASA’s Johnson Space Center has focused on the development and detailed design of the xEMU to support missions to the International Space Station (ISS) and a moon landing in 2024. In that context, this paper examines the development and baseline detailed design of the xEMU Hard Upper Torso (HUT) Assembly. This paper will outline the challenging technical requirements, significant architectural trades, technical solutions required to overcome these challenges, and a status of the detailed design. The preliminary results of Design Verification Testing (DVT) as it relates to the HUT will also be provided, along with a forward strategy for final maturation into a flight-ready design.

NASA↗

NASA NTRS2023

Using Virtual Reality to Envision Deployment of Spacesuit-Compatible Augmented Reality Displays for Lunar Surface Operations

The National Aeronautics and Space Administration (NASA) aims to land crew on the lunar surface to establish a sustainable presence and develop operational concepts for future long-duration missions. New technologies will be necessary to extend planning and execution capabilities for lunar surface activities. NASA’s Joint Augmented Reality Visual Informatics System (Joint AR) is one such technology. Joint AR is a suit-mounted augmented reality (AR) display and computes system which facilitates unprecedented information exchange and data visualization capabilities between mission support operators and suited crew. This paper describes challenges associated with developing AR technology for an envisioned work domain by applying a sociotechnical lens to the iterative testing and development of novel AR technology through virtual reality (VR). A VR testbed was established to simulate a representative lunar surface environment, enabling a series of three human-in-the-loop (HITL) tests evaluating AR navigation interfaces for exploration extravehicular activity (xEVA). Our findings identify several considerations for future Joint AR design and testing efforts, including challenges with data overload, attentional demands, and environment-related perceptual challenges. Trade-offs and potential approaches are discussed to mitigate these challenges and improve future Joint AR testing fidelity.

Jacob Keller↗

NASA NTRSDate not supplied

Using Virtual Reality to Envision Deployment of Spacesuit-Compatible Augmented Reality Displays for Lunar Surface Operations

The National Aeronautics and Space Administration (NASA) aims to land crew on the lunar surface to establish a sustainable presence and develop operational concepts for future long-duration missions. New technologies will be necessary to extend planning and execution capabilities for lunar surface activities. NASA’s Joint Augmented Reality Visual Informatics System (Joint AR) is one such technology. Joint AR is a suit-mounted augmented reality (AR) display and computes system which facilitates unprecedented information exchange and data visualization capabilities between mission support operators and suited crew. This paper describes challenges associated with developing AR technology for an envisioned work domain by applying a sociotechnical lens to the iterative testing and development of novel AR technology through virtual reality (VR). A VR testbed was established to simulate a representative lunar surface environment, enabling a series of three human-in-the-loop (HITL) tests evaluating AR navigation interfaces for exploration extravehicular activity (xEVA). Our findings identify several considerations for future Joint AR design and testing efforts, including challenges with data overload, attentional demands, and environment-related perceptual challenges. Trade-offs and potential approaches are discussed to mitigate these challenges and improve future Joint AR testing fidelity.

Matthew Miller↗

NASA NTRS2008

Ares-I Bending Filter Design using a Constrained Optimization Approach

The Ares-I launch vehicle represents a challenging flex-body structural environment for control system design. Software filtering of the inertial sensor output is required to ensure adequate stable response to guidance commands while minimizing trajectory deviations. This paper presents a design methodology employing numerical optimization to develop the Ares-I bending filters. The design objectives include attitude tracking accuracy and robust stability with respect to rigid body dynamics, propellant slosh, and flex. Under the assumption that the Ares-I time-varying dynamics and control system can be frozen over a short period of time, the bending filters are designed to stabilize all the selected frozen-time launch control systems in the presence of parameter uncertainty. To ensure adequate response to guidance command, step response specifications are introduced as constraints in the optimization problem. Imposing these constrains minimizes performance degradation caused by the addition of the bending filters. The first stage bending filter design achieves stability by adding lag to the first structural frequency to phase stabilize the first flex mode while gain stabilizing the higher modes. The upper stage bending filter design gain stabilizes all the flex bending modes. The bending filter designs provided here have been demonstrated to provide stable first and second stage control systems in both Draper Ares Stability Analysis Tool (ASAT) and the MSFC MAVERIC 6DOF nonlinear time domain simulation.

Hall, Charles↗

NASA NTRS2010

Space Shuttle Star Tracker Challenges

The space shuttle fleet of avionics was originally designed in the 1970's. Many of the subsystems have been upgraded and replaced, however some original hardware continues to fly. Not only fly, but has proven to be the best design available to perform its designated task. The shuttle star tracker system is currently flying as a mixture of old and new designs, each with a unique purpose to fill for the mission. Orbiter missions have tackled many varied missions in space over the years. As the orbiters began flying to the International Space Station (ISS), new challenges were discovered and overcome as new trusses and modules were added. For the star tracker subsystem, the growing ISS posed an unusual problem, bright light. With two star trackers on board, the 1970's vintage image dissector tube (IDT) star trackers track the ISS, while the new solid state design is used for dim star tracking. This presentation focuses on the challenges and solutions used to ensure star trackers can complete the shuttle missions successfully. Topics include KSC team and industry partner methods used to correct pressurized case failures and track system performance.

Herrera, Linda M.↗

NASA NTRS2014

Conceptual Design Optimization of an Augmented Stability Aircraft Incorporating Dynamic Response and Actuator Constraints

Empirical sizing guidelines such as tail volume coefficients have long been used in the early aircraft design phases for sizing stabilizers, resulting in conservatively stable aircraft. While successful, this results in increased empty weight, reduced performance, and greater procurement and operational cost relative to an aircraft with optimally sized surfaces. Including flight dynamics in the conceptual design process allows the design to move away from empirical methods while implementing modern control techniques. A challenge of flight dynamics and control is the numerous design variables, which are changing fluidly throughout the conceptual design process, required to evaluate the system response to some disturbance. This research focuses on addressing that challenge not by implementing higher order tools, such as computational fluid dynamics, but instead by linking the lower order tools typically used within the conceptual design process so each discipline feeds into the other. In thisresearch, flight dynamics and control was incorporated into the conceptual design process along with the traditional disciplines of vehicle sizing, weight estimation, aerodynamics, and performance. For the controller, a linear quadratic regulator structure with constant gains has been specified to reduce the user input. Coupling all the disciplines in the conceptual design phase allows the aircraft designer to explore larger design spaces where stabilizers are sized according to dynamic response constraints rather than historical static margin and volume coefficient guidelines.

Welstead, Jason↗

NASA NTRS2017

An Automaton Rover Enabling Long Duration In-Situ Science in Extreme Environments

The Automaton Rover for Extreme Environments (AREE) is a NASA Innovative Advanced Concept (NIAC) funded study focused on enabling long duration science on Venus by replacing vulnerable electronics with an entirely mechanical design. By utilizing high temperature alloys, the rover would survive on the surface of Venus for weeks if not months. The rover concept harvests wind energy using a turbine and stores it in a constant force spring. The mobility system would be guided by a mechanical computer and logic system, programed to carry out the mission. It would collect basic science data such as wind speed, temperature, and seismic events. Communicating the data back to Earth is the most challenging aspect of the system design with multiple options being explored in a trade: a simple electronic high temperature transponder, a retroreflector target or inscribing phonograph style records to be launched via a balloon to a high altitude drone capable of transmitting the data back to Earth. AREE is not only a new exciting in-situ rover concept, but also a paradigm shift to conducting in-situ science in extreme environments. Traditional extreme environment vehicles collect as many diverse data points as possible in the short period of time before system failure. AREE breaks that trend by exploring what can be done with only a few basic scientific measurements, but recorded over long periods of time. In addition to Venus, the concept can be useful in other extreme environments in the solar system including Mercury, Jupiter's radiation belts, the interiors of gas giants, the mantle of the Earth and volcanoes throughout the solar system.

Parness, Aaron↗

NASA NTRS2010

Re-Engineering Complex Legacy Systems at NASA

The Flight Production Process (FPP) Re-engineering project has established a Model-Based Systems Engineering (MBSE) methodology and the technological infrastructure for the design and development of a reference, product-line architecture as well as an integrated workflow model for the Mission Operations System (MOS) for human space exploration missions at NASA Johnson Space Center. The design and architectural artifacts have been developed based on the expertise and knowledge of numerous Subject Matter Experts (SMEs). The technological infrastructure developed by the FPP Re-engineering project has enabled the structured collection and integration of this knowledge and further provides simulation and analysis capabilities for optimization purposes. A key strength of this strategy has been the judicious combination of COTS products with custom coding. The lean management approach that has led to the success of this project is based on having a strong vision for the whole lifecycle of the project and its progress over time, a goal-based design and development approach, a small team of highly specialized people in areas that are critical to the project, and an interactive approach for infusing new technologies into existing processes. This project, which has had a relatively small amount of funding, is on the cutting edge with respect to the utilization of model-based design and systems engineering. An overarching challenge that was overcome by this project was to convince upper management of the needs and merits of giving up more conventional design methodologies (such as paper-based documents and unwieldy and unstructured flow diagrams and schedules) in favor of advanced model-based systems engineering approaches.

Ruszkowski, James↗

NASA NTRS2005

NASA Glenn Research in Controls and Diagnostics for Intelligent Aerospace Propulsion Systems

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. Also the propulsion systems required to enable the NASA (National Aeronautics and Space Administration) Vision for Space Exploration in an affordable manner will need to have high reliability, safety and autonomous operation capability. The Controls and Dynamics Branch at NASA Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. The key enabling technologies for an Intelligent Propulsion System are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance operational reliability and component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

Source record↗

NASA NTRS2007

Propulsion Controls and Diagnostics Research at NASA Glenn Research Center

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. Also the propulsion systems required to enable the National Aeronautics and Space Administration (NASA) Vision for Space Exploration in an affordable manner will need to have high reliability, safety and autonomous operation capability. The Controls and Dynamics Branch (CDB) at NASA Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of Intelligent Propulsion Systems. This paper describes the current activities of the CDB under the NASA Aeronautics Research and Exploration Systems Missions. The programmatic structure of the CDB activities is described along with a brief overview of each of the CDB tasks including research objectives, technical challenges, and recent accomplishments. These tasks include active control of propulsion system components, intelligent propulsion diagnostics and control for reliable fault identification and accommodation, distributed engine control, and investigations into unsteady propulsion systems.

Garg, Sanjay↗

NASA NTRSDate not supplied

Advanced Material Options for the Portable Life Support System

Meeting an aggressive mass requirement is a challenge for new space suit development efforts, including that of the Exploration Extravehicular Mobility Unit Portable Life Support System (PLSS) government reference design. To reduce overall system mass, titanium was selected as the primary metal for the PLSS backplate and thermal loop. However, galvanically compatible metals (Hastelloy, Inconel, Monel) have relatively high densities and require further design complexities such as coatings and more challenging manufacturing. Efforts to reduce the mass of the government reference design for an International Space Station (ISS) or lunar mission were halted due to the government’s transition to a commercial Extravehicular Activity (EVA) services approach, but research was conducted into methodologies for mass savings using advanced materials. With the advent of a lunar Artemis mission and potential for future Mars missions, mass becomes a more critical driver going forward. Therefore, alternative materials and processes must be considered to fully close the mass requirement. There are many new materials and processes that can be considered; however, considerations must be made to ensure galvanic compatibility, radiation concerns for sensitive electronics, vacuum compatibility, tight tolerances, fluid compatibility with oxygen and water, and thread insert options. Individual PLSS components may have different requirements and need to be considered separately for reducing overall mass. This report will touch on comparisons between advanced materials, focusing on composites, additive manufacturing, and plastics. It will also address the different processes that may need to be applied when using these materials in the harsh environment of space. Lastly, it will look at specific components and make recommendations for options to reduce the mass of each one.

Ryan Ogilvie↗

NASA NTRS2024

Advanced Material Options for the Portable Life Support System (PLSS)

Meeting an aggressive mass requirement is a challenge for new space suit development efforts, including that of the Exploration Extravehicular Mobility Unit Portable Life Support System (PLSS) government reference design. To reduce overall system mass, titanium was selected as the primary metal for the PLSS backplate and thermal loop. However, galvanically compatible metals (Hastelloy, Inconel, Monel) have relatively high densities and require further design complexities such as coatings and more challenging manufacturing. Efforts to reduce the mass of the government reference design for an International Space Station (ISS) or lunar mission were halted due to the government’s transition to a commercial Extravehicular Activity (EVA) services approach, but research was conducted into methodologies for mass savings using advanced materials. With the advent of a lunar Artemis mission and potential for future Mars missions, mass becomes a more critical driver going forward. Therefore, alternative materials and processes must be considered to fully close the mass requirement. There are many new materials and processes that can be considered; however, considerations must be made to ensure galvanic compatibility, radiation concerns for sensitive electronics, vacuum compatibility, tight tolerances, fluid compatibility with oxygen and water, and thread insert options. Individual PLSS components may have different requirements and need to be considered separately for reducing overall mass. This report will touch on comparisons between advanced materials, focusing on composites, additive manufacturing, and plastics. It will also address the different processes that may need to be applied when using these materials in the harsh environment of space. Lastly, it will look at specific components and make recommendations for options to reduce the mass of each one.

Ryan Ogilvie↗