Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Validating deep learning inference during chest X-ray classification for COVID-19 screening

Abstract The new coronavirus unleashed a worldwide pandemic in early 2020, and a fatality rate several times that of the flu. As the number of infections soared, and capabilities for testing lagged behind, chest X-ray (CXR) imaging became more relevant in the early diagnosis and treatment planning for patients with suspected or confirmed COVID-19 infection. In a few weeks, proposed new methods for lung screening using deep learning rapidly appeared, while quality assurance discussions lagged behind. This paper proposes a set of protocols to validate deep learning algorithms, including our ROI Hide-and-Seek protocol, which emphasizes or hides key regions of interest from CXR data. Our protocol allows assessing the classification performance for anomaly detection and its correlation to radiological signatures, an important issue overlooked in several deep learning approaches proposed so far. By running a set of systematic tests over CXR representations using public image datasets, we demonstrate the weaknesses of current techniques and offer perspectives on the advantages and limitations of automated radiography analysis when using heterogeneous data sources.

59 BASIC BIOLOGICAL SCIENCES↗

The mapping of marsh vegetation using aircraft multispectral scanner data

A test was conducted to determine if salinity regimes in coastal marshland could be mapped and monitored by the identification and classification of marsh vegetative species from aircraft multispectral scanner data. The data was acquired at 6.1 km (20,000 ft.) on October 2, 1974, over a test area in the coastal marshland of southern Louisiana including fresh, intermediate, brackish, and saline zones. The data was classified by vegetational species using a supervised, spectral pattern recognition procedure. Accuracies of training sites ranged from 67% to 96%. Marsh zones based on free soil water salinity were determined from the species classification to demonstrate a practical use for mapping marsh vegetation.

Butera, M. K.↗

Antarctic sea ice concentrations inferred from Nimbus 5 ESMR and Landsat imagery

Landsat Multispectral Scanner near-infrared band images (MSS-7) are used to calculate Antarctic ice concentration values and these results are quantitatively compared to those derived from Nimbus 5 electrically scanning microwave radiometer (ESMR) brightness temperature data. The set of images includes regions near the ice edge and near the continental boundary during late winter or spring. The percentage of ice cover is derived from the microwave data, using an algorithm that incorporates the brightness temperature emissivity and interpolated climatological physical temperatures and that is not dependent on spatial resolution. Cloud-free Landsat images are used to provide an alternative determination of large-scale ice concentrations, but this method is limited in its ability to resolve individual ice flows, especially near the ice edge. A proportional classification procedure is applied to Landsat data based on observed reflection and the results are correlated with similarly-derived ESMR ice concentration values. The corresponding ice concentration values are found to agree to + or - 15%, with the largest uncertainties occurring in regions of low ice concentration.

Comiso, J. C.↗

Ongoing Work: A Prototype Dataset for Low-flying Autonomous Medical UAS Operations

This paper presents ongoing work to create a dataset for low-flying autonomous medical UAS operations, focused on human stance recognition. This is an exploration of the viability of airborne classification for the Drone as a First Responder (DFR) concept in which a UAS arrives at the scene of an incident before emergency response personnel can get there and provides some level of situational awareness for the personnel arriving to the scene. Future incarnations could also see the UAS administer some level of care to injured parties at the scene. The data set, focused on detecting human stance, being developed here is the result of 30 test flights at NASA Langley Research Center in early 2024. In addition to flights where the participant (an anthropomorphic testing device or human) is alone in the viewing area holding a particular stance, two emergency scenes have been fabricated and collected through video - ``bike crash'' and ``difficult camping''. These test flights include four human participants. The contribution of this work upon completion will be a publicly available data set for the development of classification engines focused on human stance, and in the future, even triage.

Uncrewed Aerial Systems↗

Multiclass Classification Using Bayesian Multivariate Adaptive Regression Splines

We present a new Bayesian model for the problem of multiclass classification. In this model, the probabilities of class membership of a given observation are determined by the mean of a latent Gaussian distribution. The mean functions of this latent distribution consist of combinations of highly flexible basis functions of the inputs: multivariate adaptive regression splines (MARS), first developed for multiple regression. We use reversible jump Markov chain Monte Carlo to make inference on the classification model, including the number of basis functions. We compare the probabilistic classification performance of our proposed approach to existing methods on simulated and benchmark data, and compare uncertainty estimates on simulated data. Our proposed method compares favorably with existing Bayesian and frequentist multiclass classification methods in out-of-sample probabilistic classification, and uncertainty estimation of these probabilistic classifications. We examine the fit of the proposed method to a data set of hurricane storm surge levels near Delaware Bay, US, and conclude that sea level rise is a key contributor to damage delivered by storm surge.

97 MATHEMATICS AND COMPUTING↗

Results and lessons learned from accelerating radio frequency modeling using machine learning [slides]

The “advanced tokamak” reactor concept is a leading candidate for a steady state fusion pilot plant. An advanced tokamak (AT) sustains a majority of the required plasma current with effects resulting from maintenance of the peaked pressure at the device center. This current is augmented by auxiliary current drive sources. These auxiliary actuators may consist of neutral particle beams and/or radio frequency (RF) systems such as lower hybrid current drive (LHCD) and high harmonic fast wave (HHFW) current drive using radio and microwaves from antennas. The primary focus of this work is to develop models of RF current profile control suitable for use in integrated modeling frameworks and for real-time control in experiments. Direct physics models of RF current drive can be computationally intensive. In order to achieve predictive times appropriate for the thousands of calls needed in real-time control of experiments and for use in integrated models, we will apply modern machine learning (ML) techniques to accelerate these models and interpolate their results. To generate the fast and accurate models for use in control level algorithms and integrated modeling we need to replace present models with high dimensional interpolation of their results. We will perform additional simulations across a broader parameter range for EAST and other tokamaks in different physics regimes (Alcator C-Mod, DIII-D, WEST, CFETR, ARC, ITER) and combine them into a larger database for training and testing of the ML models. Further testing of the control level models with experimental current profile data from EAST and C-Mod tokamaks will provide additional confirmation of the control level model before integration in a tokamak control system or integrated modeling suite. ML will be used to optimize the selection of training data consisting of RF current driven at different values of density profile, temperature profile, plasma current, and wavenumber. ML will also be used to facilitate classification of current drive from these input data. The output of this effort will be a validated classifier capable of determining the current drive profiles for HHFW CD and LHCD on a mille-second timescale. This will provide a breakthrough capability enabling real-time control of RF driven current profiles in experiments including ITER ICRF and use integrated modeling frameworks requiring thousands of current profile calculations in discharge simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Remote-sensing technology applied to forest assessment in California

Remote-sensing technology has been thoroughly evaluated for the analysis of California forest policy. A statewide, 1.6-acre-resolution, digital land-cover data base of Landsat Multispectral Scanner (MSS) classification has been produced. Three major resource regions have been analyzed in detail and one of them geographically integrated with 12 other physical and socioeconomic data layers to model fire and reforestation problems, using a geographic information system (GIS). A study of GIS design criteria has been conducted and the California Department of Forestry, the cooperator in all of these studies, is presently evaluating the alternatives and implementing certain aspects of them.

Peterson, D. L.↗

Use of collateral information to improve LANDSAT classification accuracies

Methods to improve LANDSAT classification accuracies were investigated including: (1) the use of prior probabilities in maximum likelihood classification as a methodology to integrate discrete collateral data with continuously measured image density variables; (2) the use of the logit classifier as an alternative to multivariate normal classification that permits mixing both continuous and categorical variables in a single model and fits empirical distributions of observations more closely than the multivariate normal density function; and (3) the use of collateral data in a geographic information system as exercised to model a desired output information layer as a function of input layers of raster format collateral and image data base layers.

Strahler, A. H.↗

Automatic classification of reforested Pinus SPP and Eucalyptus SPP in Mogi-Guacu, SP, Brazil, using LANDSAT data

The author has identified the following significant results. Single date LANDSAT CCTs were processed, by Image-100 to classify Pinus and Eucalyptus species and their age groups. The study area Mogi-Guagu was located in the humid subtropical climate zone of Sao Paulo. The study was divided into ten preliminary classes and featured selection algorithms were used to calculate Bhattacharyya distance between all possible pairs of these classes in the four available channels. Classes having B-distance values less than 1.30 were grouped in four classes: (1) class PE - P. elliottii, (2) class P0 - Pinus species other than P. elliotii, (3) class EY - Eucalyptus spp. under two years, and (4) class E0 - Eucalyptus spp. more than two years old. The percentages of correct classification ranged from 70.9% to 94.12%. Comparisons of acreage estimated from the Image-100 with ground truth data showed agreement. The Image-100 percent recognition values for the above four classes were 91.62%, 87.80%, 89.89%, and 103.30%, respectively.

Dejesusparada, N.↗

Spatiotemporal Methane Emissions from Global Lakes and Reservoirs

Inland aquatic systems, such as lakes and reservoirs, contribute substantially to global methane (CH4) emissions; yet are among the most uncertain components of the total CH4 budget. Lakes and reservoirs have received recent attention as they may generate high CH4 fluxes. Improved quantification of these CH4 fluxes, particularly their spatiotemporal distribution, is key to realistically incorporating them in CH4 modeling and budget studies. Here we report on a new global, gridded (0.25° lat × 0.25° lon) study of lake and reservoir CH4 emissions, accounting for new knowledge regarding lake and reservoir areal extent and distribution, and spatiotemporal emission patterns influenced by diurnal variability, temperature-dependent seasonality, satellite-derived freeze-thaw dynamics, and eco-climatic and physical CH4-centric type classification. The results of this new data set comprise daily CH4 emissions from lake and reservoirs throughout the full annual cycle and are tightly anchored to field observations, in situ measurements, and remote-sensing observations. Results show that reservoirs cover 297 × 103 km2 globally and emit 10.1 Tg CH4 yr-1 from diffusive (1.2 Tg CH4 yr-1) and ebullitive (8.9 Tg CH4 yr-1) emission pathways. On a global scale, CH4 emitting areas of lakes cover 1853 × 103 km2 and emit 37.1 Tg CH4 yr-1 from diffusive (17.1 Tg CH4 yr-1) and ebullitive (23.0 Tg CH4 yr-1) emission pathways and an additional ebullition flux of 5.2 Tg CH4 yr-1 upon ice-melt due to the accumulation of bubbles during the freeze period. This analysis of lakes and reservoir CH4 emission addresses multiple gaps and uncertainties in previous studies and represents an important contribution to studies of the global CH4 budget. The new data sets and methodologies from this study provide a framework to better understand and model the current and future role of lakes and reservoirs in the global CH4 budget and to guide efforts to mitigate inland aquatic system CH4 emissions. This presentation will describe the methodologies applied and the major results of this study focusing on the spatiotemporal distribution of lake and reservoir type classification, processes driving lake and reservoir emission seasonality, and the contribution of individual lake and reservoir types to the annual cycle of inland aquatic CH4 emissions.

Spatiotemporal↗

Galaxy Morphology Classification Using Bayesian Neural Networks for LSST

Within the decade, many new ground and space-based observatories will become operational, generating massive amounts of data on short timescales. New surveys like Rubin Observatory's Legacy Survey of Space and Time (LSST) will be capable of observing objects with greater resolution than ever before, but processing and analyzing these datasets optimally will pose a significant challenge. In an effort to prepare for this, we explore how incorporating Deep Neural Networks can better support future data-intensive Astrophysics tasks such as galaxy morphology classification.

79 ASTRONOMY AND ASTROPHYSICS↗

Pushing automated morphological classifications to their limits with the Dark Energy Survey

ABSTRACT We present morphological classifications of ∼27 million galaxies from the Dark Energy Survey (DES) Data Release 1 (DR1) using a supervised deep learning algorithm. The classification scheme separates: (a) early-type galaxies (ETGs) from late-type galaxies (LTGs); and (b) face-on galaxies from edge-on. Our convolutional neural networks (CNNs) are trained on a small subset of DES objects with previously known classifications. These typically have mr ≲ 17.7 mag; we model fainter objects to mr < 21.5 mag by simulating what the brighter objects with well-determined classifications would look like if they were at higher redshifts. The CNNs reach 97 per cent accuracy to mr < 21.5 on their training sets, suggesting that they are able to recover features more accurately than the human eye. We then used the trained CNNs to classify the vast majority of the other DES images. The final catalogue comprises five independent CNN predictions for each classification scheme, helping to determine if the CNN predictions are robust or not. We obtain secure classifications for ∼87 per cent and 73 per cent of the catalogue for the ETG versus LTG and edge-on versus face-on models, respectively. Combining the two classifications (a) and (b) helps to increase the purity of the ETG sample and to identify edge-on lenticular galaxies (as ETGs with high ellipticity). Where a comparison is possible, our classifications correlate very well with Sérsic index (n), ellipticity (ϵ), and spectral type, even for the fainter galaxies. This is the largest multiband catalogue of automated galaxy morphologies to date.

79 ASTRONOMY AND ASTROPHYSICS↗

Southwest Pacific tropical cyclone development classification utilizing machine learning and synoptic composites

This study evaluates the ability of machine learning algorithms to classify tropical depressions (TDs) and tropical storms (TSs) in the western region of the southwest Pacific Ocean (SWPO). Decision rules are generated to predict the environment required for a depression to fully develop into a mature storm, and the most influential predictors in the classification decision are ranked. TD and TS are discriminated based on a maximum sustained wind speed threshold (≥17 ms -1 ). Various aerosol, thermodynamic, and dynamic parameters are extracted closest to the initiation point of each non-developing and developing sample. The covariates associated with each labelled sample are used to train a decision tree and random forest model. Results using a testing dataset suggest the random forest approach more accurately distinguishes between non-developing and developing samples. The classification accuracy of the decision tree and random forest are 72% and 91%, respectively. Random forest outperformed the decision tree by providing higher accuracy in test data. The most important variables for binary classification are sea salt aerosol optical depth (AOD), 1,000 mb relative humidity, and sea surface temperature. AOD is a quantitative estimate of the aerosols presents in the air through the extinction of a ray of light as it passes through the atmosphere. Mean composite maps constructed in an unsupervised manner have been created for the most important variables identified by the random forest classifier during TD and TS events to highlight the difference in geophysical and aerosol variables' climatology during the two different classifications. This work will advance the risk management strategies for northeastern Australia and other SWPO basin islands to control their tropical cyclone related losses through prioritizing forecasting variables that are the strongest predictors of the strengthening of tropical depressions into tropical cyclones.

54 ENVIRONMENTAL SCIENCES↗

Fusion of Experiments and Simulations for Real-Time Identification of Pipeline Defects

In this study, we explored fusion of experiments and simulations for real time identification of pipeline defects across physical and non-physical domains. The challenges associated to data processing were addressed and a combined classification models was presented via CNN models. In addition, regression model based on XGBOOST is built to determine the defect location and defect dimension from data-driven features of guided wave signals captured by SMS fiber optic sensor.

deep learning↗

Additional studies of forest classification accuracy as influenced by multispectral scanner spatial resolution

First, an analysis of forest feature signatures was used to help explain the large variation in classification accuracy that can occur among individual forest features for any one case of spatial resolution and the inconsistent changes in classification accuracy that were demonstrated among features as spatial resolution was degraded. Second, the classification rejection threshold was varied in an effort to reduce the large proportion of unclassified resolution elements that previously appeared in the processing of coarse resolution data when a constant rejection threshold was used for all cases of spatial resolution. For the signature analysis, two-channel ellipse plots showing the feature signature distributions for several cases of spatial resolution indicated that the capability of signatures to correctly identify their respective features is dependent on the amount of statistical overlap among signatures. Reductions in signature variance that occur in data of degraded spatial resolution may not necessarily decrease the amount of statistical overlap among signatures having large variance and small mean separations. Features classified by such signatures may thus continue to have similar amounts of misclassified elements in coarser resolution data, and thus, not necessarily improve in classification accuracy.

Sadowski, F. E.↗

Fusion of Experiments and Simulations for Real-Time Identification of Pipeline Defects

In this study, we explored fusion of experiments and simulations for real time identification of pipeline defects across physical and non-physical domains. The challenges associated to data processing were addressed and a combined classification models was presented via CNN models. In addition, regression model based on XGBOOST is built to determine the defect location and defect dimension from data-driven features of guided wave signals captured by SMS fiber optic sensor.

deep learning↗

How reliable is distribution of relaxation times (DRT) analysis? A dual regression-classification perspective on DRT estimation, interpretation, and accuracy

The distribution of relaxation times (DRT) has gained increasing attention and adoption in recent years as a versatile method for analyzing electrochemical impedance spectroscopy (EIS) data obtained from complex devices like fuel cells, electrolyzers, and batteries. The DRT deconvolutes the impedance without a priori specification of a generative model, which is especially useful for interpretation and model selection when the governing principles of the system under study are not fully understood. However, DRT estimation is an ill-posed inversion problem that must be addressed with a subjective choice of regularization and tuning, which leaves substantial risk of misleading interpretations of EIS data. In this work, we suggest a new classification view of the DRT inversion to clarify DRT estimation and interpretation. We introduce a dual regression-classification framework that unifies the classification and regression views of the DRT inversion with wide-reaching implications for DRT analysis. The dual framework is employed to demonstrate a new kind of DRT inversion algorithm and develop novel evaluation metrics that capture previously ignored aspects of DRT accuracy. These approaches are applied to both synthetic data and experimental spectra collected from a protonic ceramic fuel cell and a lithium-ion battery to illustrate their broad utility. The dual inversion algorithm shows promising performance for accurate DRT estimation and autonomous model identification, while the dual evaluation approach produces metrics that meaningfully assess the strengths and risks of DRT algorithms. Here this work provides valuable insight for both practical application of the DRT to experimental data and further development of EIS analysis methods.

36 MATERIALS SCIENCE↗

A framework for implementing data services in multi-service mobile satellite systems

Mobile satellite systems being planned for introduction in the early 1990s are expected to be invariably of the multi-service type. Mobile Telephone Service (MTS), Mobile Radio Service (MRS), and Mobile Data Service (MDS) are the major classifications used to categorize the many user applications to be supported. The MTS and MRS services encompass circuit-switched voice communication applications, and may be efficiently implemented using a centralized Demand-Assigned Multiple Access (DAMA) scheme. Applications under the MDS category are, on the other hand, message-oriented and expected to vary widely in characteristics; from simplex mode short messaging applications to long duration, full-duplex interactive data communication and large file transfer applications. For some applications under this service category, the conventional circuit-based DAMA scheme may prove highly inefficient due to the long time required to set up and establish communication links relative to the actual message transmission time. It is proposed that by defining a set of basic bearer services to be supported in MDS and optimizing their transmission and access schemes independent of the MTS and MRS services, the MDS applications can be more efficiently integrated into the multi-service design of mobile satellite systems.

Ali, Mohammed O.↗