Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational environment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Predicting the Cosmic-Ray Environment Near Earth

Package of computer programs developed to predict cosmic-ray environment for spacecraft in orbit near Earth. Single cosmic-ray particle deposits enough electrical charge on sensitive area of individual circuit to change bit state. Single-event upsets may not cause permanent damage but upset functioning devices. Used to predict upset rate for space mission. Also calculates time-average cosmic-ray environment for multiple circular orbits, fragments of trajectories, and isolated points. Package written in HPL for interactive execution and implemented on HP 9825B desktop computer.

Edmonds, L.↗

Computer simulations of two-pickup-ion instabilities in a cometary environment

This paper presents a one-dimensional electromagnetic hybrid computer simulation of distant cometary environments, in which protons and oxygen ions are injected continuously at the same time. It is demonstrated that, when, instead of a single component, both protons and oxygen ions are injected, the faster growing shorter-wavelength proton-proton right-hand resonant instability dominates the early time physics, leading to linear temporal growth of the fluctuating magnetic field energy density and pitch angle scattering of the protons (but causing no significant response by the nonresonant oxygen ions). At later times, as the injected oxygen ions accumulate sufficient density, the oxygen-proton right-hand resonant instability emerges, exhibiting exponential temporal growth to a relatively large peak amplitude, phase bunching, and magnetically trapping the oxygen ions. At times after peak amplitude, the oxygen-proton fluctuations stochastically accelerate some of the injected protons.

Gary, S. Peter↗

Error rate reduction of single-qubit gates via noise-aware decomposition into native gates

In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this paper, we introduce an approach by which knowledge of a qubit’s initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from $1.6 \times 10 ^{-3}$ to $1.0 \times 10 ^{-3}$ , provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system’s T 1 and T 2 times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits’ intermediate states can be inferred. This paper presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native hardware gates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Workflows for Science: A comprehensive guide for ensemble workflow tools usage with applications on OLCF systems

The growing demand for robust computational and workflow environments for scientific applications and user communities at the Oak Ridge Leadership Computing Facility (OLCF) has prompted collaboration with ensemble tools development teams and facility users to produce this technical paper. We connect science applications to the RADICAL-Pilot (RP) workflow tool to execute ensemble instantiations using the Frontier supercomputer. The documented installation, usage, and execution demonstrates how RP streamlines scientific workflows at OLCF. We outline the specific steps OLCF users can follow to integrate this tool with their applications and advance their research. This document stands as a comprehensive guide to OLCF users of ensemble workflow tools with examples on real applications using the Frontier supercomputer.

97 MATHEMATICS AND COMPUTING↗

Computational fluid dynamics in a marine environment

The introduction of the supercomputer and recent advances in both Reynolds averaged, and large eddy simulation fluid flow approximation techniques to the Navier-Stokes equations, have created a robust environment for the exploration of problems of interest to the Navy in general, and the Naval Underwater Systems Center in particular. The nature of problems that are of interest, and the type of resources needed for their solution are addressed. The goal is to achieve a good engineering solution to the fluid-structure interaction problem. It is appropriate to indicate that a paper by D. Champman played a major role in developing the interest in the approach discussed.

Carlson, Arthur D.↗

Building Virtual Ecosystems: Computational Challenges for Mechanistic Modeling of Terrestrial Environments Workshop, Germantown, Maryland, March 26–27, 2014

The mission of the Climate and Environmental Sciences Division of the Office of Biological and Environmental Research (BER) within the U.S. Department of Energy’s (DOE) Office of Science is “to advance a robust, predictive understanding of Earth’s climate and environmental systems and to inform the development of sustainable solutions to the nation’s energy and environmental challenges.” This formidable challenge requires quantification of stocks and controls on states, fluxes, and residence times of water, carbon, and other key elements through all components of the terrestrial system. These components include vegetation, soils, the deep vadose zone, groundwater, and surface water. To achieve this level of predictive understanding, a new generation of multiscale, multiphysics models is needed for terrestrial systems—models that incorporate process couplings and feedbacks between various “pools” (i.e., vegetation, soils, subsurface aquifers, and surface waters) across wide ranges of spatial and temporal scales. To explore the potential of a new generation of multiscale, multiphysics models for revolutionizing the understanding of terrestrial ecosystem dynamics, BER held the Computational Challenges for Mechanistic Modeling of Terrestrial Environments workshop on March 26–27, 2014, in Germantown, Maryland. The workshop brought together 29 researchers with diverse expertise, including hydrologists, environmental scientists, ecologists, microbiologists, plant scientists, and computational scientists. Through a combination of invited talks, breakout sessions, and report-back discussions, workshop attendees identified challenges and research opportunities needed to develop a more seamless and continuous framework for mechanistic modeling of terrestrial environments extending from the bedrock to the atmospheric boundary layer and from single-plant systems to fields of crops to watersheds and river basins.

54 ENVIRONMENTAL SCIENCES↗

Auto-tuning Stencil Computations on Multicore and Accelerators

The recent transformation from an environment where gains in computational performance came from increasing clock frequency and other hardware engineering innovations, to an environment where gains are realized through the deployment of ever increasing numbers of modest performance cores has profoundly changed the landscape of scientific application programming. This exponential increase in core count represents both an opportunity and a challenge: access to petascale simulation capabilities and beyond will require that this concurrency be efficiently exploited.

43 PARTICLE ACCELERATORS↗

Sustainable Cooperative Robotic Technologies for Human and Robotic Outpost Infrastructure Construction and Maintenance

Robotic Construction Crew (RCC) is a heterogeneous multi-robot system for autonomous acquisition, transport, and precision mating of components in construction tasks. RCC minimizes resources constrained in a space environment such as computation, power, communication and, sensing. A behavior-based architecture provides adaptability and robustness despite low computational requirements. RCC successfully performs several construction related tasks in an emulated outdoor environment despite high levels of uncertainty in motions and sensing. Quantitative results are provided for formation keeping in component transport, precision instrument placement, and construction tasks.

multi-robot systems↗

SU-E-T-422: Fast Analytical Beamlet Optimization for Volumetric Intensity-Modulated Arc Therapy

Purpose: To implement a fast optimization algorithm on CPU/GPU heterogeneous computing platform and to obtain an optimal fluence for a given target dose distribution from the pre-calculated beamlets in an analytical approach. Methods: The 2D target dose distribution was modeled as an n-dimensional vector and estimated by a linear combination of independent basis vectors. The basis set was composed of the pre-calculated beamlet dose distributions at every 6 degrees of gantry angle and the cost function was set as the magnitude square of the vector difference between the target and the estimated dose distribution. The optimal weighting of the basis, which corresponds to the optimal fluence, was obtained analytically by the least square method. Those basis vectors with a positive weighting were selected for entering into the next level of optimization. Totally, 7 levels of optimization were implemented in the study.Ten head-and-neck and ten prostate carcinoma cases were selected for the study and mapped to a round water phantom with a diameter of 20cm. The Matlab computation was performed in a heterogeneous programming environment with Intel i7 CPU and NVIDIA Geforce 840M GPU. Results: In all selected cases, the estimated dose distribution was in a good agreement with the given target dose distribution and their correlation coefficients were found to be in the range of 0.9992 to 0.9997. Their root-mean-square error was monotonically decreasing and converging after 7 cycles of optimization. The computation took only about 10 seconds and the optimal fluence maps at each gantry angle throughout an arc were quickly obtained. Conclusion: An analytical approach is derived for finding the optimal fluence for a given target dose distribution and a fast optimization algorithm implemented on the CPU/GPU heterogeneous computing environment greatly reduces the optimization time.

60 APPLIED LIFE SCIENCES↗

A non-CFD modeling system for computing 3D wind and concentration fields in urban environments

The Quick Urban & Industrial Complex (QUIC) Dispersion Modeling System has been developed to rapidly compute the transport and dispersion of toxic agent releases in the vicinity of buildings. It is composed of an empirical-diagnostic wind solver, an 'urbanized' Lagrangian random-walk model, and a graphical user interface. The code has been used for homeland security and environmental air pollution applications. In this paper, we discuss the wind solver methodology and improvements made to the original Roeckle schemes in order to better capture flow fields in dense built-up areas. The mode1-computed wind and concentration fields are then compared to measurements from several field experiments. Improvements to the QUIC Dispersion Modeling System have been made to account for the inhomogeneous and complex building layouts found in large cities. The logic that has been introduced into the code is described and comparisons of model output to full-scale outdoor urban measurements in Oklahoma City and New York City are given. Although far from perfect, the model agreed fairly well with measurements and in many cases performed equally to CFD codes.

97 MATHEMATICS AND COMPUTING↗

Comparison of Resource Platform Selection Approaches for Scientific Workflows

Cloud computing is increasingly considered as an additional computational resource platform for scientific workflows. The cloud offers opportunity to scale-out applications from desktops and local cluster resources. At the same time, it can eliminate the challenges of restricted software environments and queue delays in shared high performance computing environments. Choosing from these diverse resource platforms for a workflow execution poses a challenge for many scientists. Scientists are often faced with deciding resource platform selection trade-offs with limited information on the actual workflows. While many workflow planning methods have explored task scheduling onto different resources, these methods often require fine-scale characterization of the workflow that is onerous for a scientist. In this position paper, we describe our early exploratory work into using blackbox characteristics to do a cost-benefit analysis across of using cloud platforms. We use only very limited high-level information on the workflow length, width, and data sizes. The length and width are indicative of the workflow duration and parallelism. The data size characterizes the IO requirements. We compare the effectiveness of this approach to other resource selection models using two exemplar scientific workflows scheduled on desktops, local clusters, HPC centers, and clouds. Early results suggest that the blackbox model often makes the same resource selections as a more fine-grained whitebox model. We believe the simplicity of the blackbox model can help inform a scientist on the applicability of cloud computing resources even before porting an existing workflow.

97 MATHEMATICS AND COMPUTING↗

Learning environment simulator for decision making in severe weather

The Severe Weather Planning Simulator (SWPS), developed by Los Alamos National Laboratory (LANL), is a computer-based learning environment of conditions and response options to potential severe weather conditions at the Macondo Well (MC252) during response and recovery operations. SWPS is a computer aid designed to expose users to uncertain hurricane conditions and allow them to make decisions at a high level about ship deployment and operations and be exposed to potential consequences in personnel and equipment safety and pollution prevention efforts. The goal is not to predict the future but rather to expose decision makers to potential scenarios and the tradeoffs that will need to be considered when making decisions about personnel and ship deployment. Although this work is focused solely on Macondo response operations, it is readily extensible to other recovery operations involving a range of conditions, geographic locations and exploration assets. Documented herein is a brief summary of the results of an initial trial of SWPS with four employees of BP involved with Macondo response operations. SWPS uses system level models to represent ship operations including movements to port under storm threat and the return to operations, ship fragility, personnel movements and vulnerability in storm conditions, pollution prevention results, a hurricane scenario generation model and a decision model. The models are wrapped in an interface enabling users to observe conditions, make decisions on ship and personnel movements and evaluate the results of their actions. A two hour workshop was conducted on August 18 at the BP Westlake offices in Houston to assess a preliminary version of the simulator. The workshop goal was to assess the potential utility of SWPS, evaluate its interface, and function and gather suggestions for further development. Four BP employees - Ed Bracken, Hugh Banon, Earnest Bush, and Troy Endicott - were introduced to the simulator and asked to run through a scenario in a hands-on evaluation of its current and potential utility.

54 ENVIRONMENTAL SCIENCES↗

Effects on Training Using Illumination in Virtual Environments

Camera based tasks are commonly performed during orbital operations, and orbital lighting conditions, such as high contrast shadowing and glare, are a factor in performance. Computer based training using virtual environments is a common tool used to make and keep CTW members proficient. If computer based training included some of these harsh lighting conditions, would the crew increase their proficiency? The project goal was to determine whether computer based training increases proficiency if one trains for a camera based task using computer generated virtual environments with enhanced lighting conditions such as shadows and glare rather than color shaded computer images normally used in simulators. Previous experiments were conducted using a two degree of freedom docking system. Test subjects had to align a boresight camera using a hand controller with one axis of rotation and one axis of rotation. Two sets of subjects were trained on two computer simulations using computer generated virtual environments, one with lighting, and one without. Results revealed that when subjects were constrained by time and accuracy, those who trained with simulated lighting conditions performed significantly better than those who did not. To reinforce these results for speed and accuracy, the task complexity was increased.

Maida, James C.↗

Technology advances and market forces: Their impact on high performance architectures

Reasonable projections into future supercomputer architectures and technology require an analysis of the computer industry market environment, the current capabilities and trends within the component industry, and the research activities on computer architecture in the industrial and academic communities. Management, programmer, architect, and user must cooperate to increase the efficiency of supercomputer development efforts. Care must be taken to match the funding, compiler, architecture and application with greater attention to testability, maintainability, reliability, and usability than supercomputer development programs of the past.

Best, D. R.↗

Reuse research plans at Langley Research Center

The reuse activities at Langley have centered on the development of the Eli System by SPS. The development of a computer systems design environment at Langley was described as a target application for the future Eli system. This environment combines software development tools with an architecture design and analysis tool. Specifically, a Computer-Aided Software Engineering (CASE) system, under development at Charles Stark Draper Laboratory for Langley, is being used to generate Ada code for use in architecture functional simulations using the Architecture Design and Assessment System (ADAS). The Eli system will be included in this tool set and will be used to organize and promote reuse of the functional simulation code modules.

Voigt, Susan J.↗