Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Inspectability Metric: A Formalized System Of Measurement Enabling The Design For Inspection Framework

Nondestructive evaluation (NDE) engineers are often confronted with structural design choices that present challenges to meeting inspection requirements. These challenges, at best, increase the resources needed to design an inspection solution and, at worst, require resource intensive redesign of the structure. If the inspectability of the structure can be determined early in the design cycle, these challenging inspection scenarios can be avoided. The emergence of additive manufacturing has further compounded this problem by enabling the creation of highly optimized structures with no regard to inspection constraints. Design for inspection (DFI) offers a framework to integrate nondestructive evaluation (NDE) into the design process to alleviate the mechanisms that produce uninspectable designs. DFI is the concept of including inspectability in a multi-objective optimization framework so that it can be considered in parallel to other metrics such as mass and manufacturability. This allows rapid evaluation of the trade-off between design metrics to find solutions that meet the inspection needs of a particular material system, structural concept, or vehicle program. To enable DFI, there must be a system by which the inspectability of a structure can be measured. This system must be agile to produce results quickly, it must be versatile to work with the type of incomplete information one would encounter early in the design process (such as lack of inspection requirements), and it must be delivered in a form that is easily understood by designers. To meet this need, this presentation introduces the novel inspectability metric as a system to measure inspectability. The inspectability metric is a standardized, automation friendly procedure that uses simulations to determine inspectability. Along with guidelines to properly process designs and integrate with existing workflows, the inspectability metric provides a suite of simulation tests to interrogate the ability to find defects and the sensitivity to variability. The testing rubric is designed to maximize the coverage of the parameter space while minimizing the number of simulations needed. The inspectability metric has been in development in collaboration with industry partners to ensure compatibility with modern simulation tools and aerospace design workflows. In this study, we will demonstrate how the inspectability metric is able to determine the inspectability of multiple types of structures, including aerospace composites and additively manufactured parts. We will then show how the inspectability score can be plugged into existing design optimization tasks, such as structural sizing algorithms or design for manufacturing (DFM) frameworks.

Design for inspection↗
NASA NTRSDate not supplied

Workshop Goals and MEO Overview

To provide an overview of current meteor instrumentation, meteoroid models, and meteor shower forecasting techniques.§Identify knowledge gaps and areas of focus for the hazardousmeteoroid environment (0.1 to 1 cm). Foster collaborations and discussions among North American meteor researchers.

MEO↗
NASA NTRSDate not supplied

Identifying Human Factors Research for Unmanned Aircraft Systems (UAS) and Advanced Air Mobility (AAM)

This paper identifies some of the key human factors (HF) challenges when integrating Unmanned Aircraft Systems (UAS) and Advanced Air Mobility (AAM) into the civil airspace. Unique HF considerations—those which are derived from the key differentiating aspects of UAS/AAM compared to conventional aviation—are the primary basis for identifying HF research opportunities. By identifying what makes UAS and AAM fundamentally different from conventional aviation, from a human integration perspective, HF research can be targeted to effectively inform best practices, standards, policy, guidance, and regulations associated with aircraft and air traffic systems and operations. HF research areas are discussed within the following topic areas: Sustained low-altitude operations; loss of natural sensing; novel aircraft; novel operations; link management and lost link; link performance; distributed pilot teams; and increased automation. The identified research descriptions are intended to serve as illustrative examples of what research is fundamental, and why. They are not intended to prescribe, prioritize or exclude research.

AAM↗
NASA NTRSDate not supplied

The International Space Station, Optical Communications, and Delay Tolerant Networking: Towards A Solar System Internet Architecture

As Delay Tolerant Networking (DTN) matures as a software product its use cases have extended to infrastructural and architectural studies, bringing DTN closer to a widespread, operational technology. While it is known that a DTN can be configured, given complete information about a system of nodes, to provision a system with a complete network capability, what remains is to tackle practical considerations such as scalability, networking best practices, and how to establish service providers. In this paper, we document progress towards a scalable DTN architecture that was tested across multiple organizational and project boundaries; our approach was tested across nodes flying on the International Space Station (ISS) connected to a ground network. The network consists of four main network areas: the ISS, the White Sands Complex (WSC), the Mission Cloud Platform (MCP), and NASA’s Huntsville Operations Support Center (HOSC). The connections on the ground (WSC, MCP, and HOSC) are straightforward technically, but represent administrative and non-technical challenges that had to be overcome. The connection from the ISS to WSC was realized through a hybrid optical/RF means. In particular, NASA’s Integrated Laser Communications Relay Demonstration (LCRD) can form a relay from lowEarth-orbit (LEO) to the Earth, and was used in conjunction with the LCRD LEO User Modem and Amplifier Terminal (ILLUMA-T) on the ISS to form a link to one of three geographically diverse ground stations. A major goal was to achieve communications while keeping the ISS nodes unaware of ground station choices and scheduling. These disparate links were networked using High-rate DTN (HDTN), which enabled the desired architecture. The network architecture, tests, HDTN performance metrics, and general observations made are all discussed in detail, including a discussion on the successful utilization of the DTN security standard known as DTN Bundle Protocol Security (BPSec). We conclude with suggestions for next steps, and in particular focus on extending this architecture to the Near Space Network (NSN) and the upcoming LunaNet.

Alan Hylton↗
NASA NTRS2024

The 2025 Meteor Shower Activity Forecast for Low Earth Orbit

The purpose of this document is to provide a forecast of major meteor shower activity in low Earth orbit (LEO). Most annual showers are expected to display typical activity, but the October Draconids and possibly the Andromedids are forecast to exhibit significant outbursts in activity. The eta Aquariids are expected to return to normal this year, after two years of increased rates.

meteoroid↗
NASA NTRSDate not supplied

Technology Developed Through VIPER

Introduction to the "Technology Developed Through VIPER" panel at the 2024 NASA Planetary Science Technology Symposium

lunar rover↗
NASA NTRSDate not supplied

Preliminary Development of Multi-Vehicle (m:N) Operations with NASA Langley’s Remote Vehicle Operations Center

To achieve the vision of Advanced Air Mobility (AAM), a transition from localized operations of aircraft to remote operations is being pursued across many use cases. This transition will allow fewer human operators to manage more increasingly autonomous aircraft (i.e., m operators managing N vehicles, or m:N). To study this operational concept, the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) has developed a prototype remote vehicle operations center and ground control station (GCS) software to conduct research with simulated and real flight operations. To date, flight operations at LaRC have been limited to one vehicle per operator. However, the current paper describes initial development and considerations for enabling m:N flight operations at LaRC. Further, the research described in this paper provides the foundation for a concept of operations (ConOps) that will be developed to support remote operators managing multiple increasingly autonomous vehicles, with the goal of exploring human-autonomy teaming (HAT) concepts that enable more advanced m:N operations. Two key enablers have been identified to facilitate successful m:N operations: GCS software updates for multi-vehicle management and procedural updates for vehicle handoffs during off-nominal events. Additionally, specific modifications were identified across five key areas: technology and software, team structure, inter-team communication, contingency plans, and operator decision flows. Next steps in forming the LaRC m:N ConOps will include working with subject-matter experts to identify off-nominal scenarios, implementing the recommended GCS functionality for m:N operations, and performing integration testing of facility capabilities and new operational procedures. Although the future m:N ConOps will be tailored to the NASA LaRC remote operations facility and flight range, it is intended to be a transparent, accessible, and reality-based exemplar for external organizations seeking to create or evaluate their own m:N operational concepts.

m:N↗
NASA NTRSDate not supplied

Towards A Better Measurement of eta-Earth and Beyond Via Modernizing the Kepler Pipeline: An Update

The measurement of the occurrence of rocky habitable-zone planets orbiting Sun-like stars (eta-Earth), is a fundamental quantity for guiding our search for habitable exoplanets. Despite being launched 15 years ago, NASA’s Kepler mission remains responsible for finding the majority of all known exoplanet candidates relevant to eta-Earth, ushering in a new era of exoplanet demographics studies and continuing to drive planet occurrence rate calculations. However, the paucity of detections of likely rocky planets in the habitable zones of their host stars remains a limiting factor for estimating eta-Earth. We describe our five-year project for modernizing the Kepler planet detection and vetting pipeline in order to produce a more complete and reliable exoplanet catalog, which will lead to more accurate and precise measurements of eta-Earth. First, we are currently porting the original Kepler pipeline code from MATLAB to Python. We will then describe new stellar catalogs based on Gaia and ground-based imaging data, and ways to improve the pipeline detection and vetting algorithms. We will provide an update on the current state of this work. When completed, we will use this new pipeline and catalog to calculate updated estimates of eta-Earth. The full, updated pipeline code in Python, as well as all our inputs and results, will be made available to the public for detailed exoplanet occurrence-rate and demographics studies.

kepler↗