SEARCH · Engineering Papers

Results for “adaptive methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Solution techniques for the vorticity-streamfunction formulation of two-dimensional unsteady incompressible flows

A review of the solution techniques of Tezduyar et al. (1988 and 1989) for the vorticity-streamfunction formulation of two-dimensional incompressible flows is presented. While both the viscous and inviscid cases are considered, the derivation of the proper finite-element formulations for multiply connected domains is emphasized. In all formulations associated with the vorticity transport equation, the streamline upwind/Petrov-Galerkin method is used. The adaptive implicit-explicit and grouped element-by-element solution strategies are employed to maximize the computational efficiency. The solutions obtained in all test cases compare well with solutions from previously published investigations. The convergence and benchmark studies performed in this paper show that the solution techniques presented are accurate, reliable, and efficient.

Tezduyar, T. E.↗

NASA NTRS1990

A Chebyshev matrix method for the spatial modes of the Orr-Sommerfeld equation

The Chebyshev matrix collocation method is applied to obtain the spatial modes of the Orr-Sommerfeld equation for Poiseuille flow and the Blasius boundary layer. The problems is linearized by the companion matrix technique for semiinfinite domain using a mapping transformation. The method can be easily adapted to problems with different boundary conditions requiring different transformations.

Danabasoglu, Gokhan↗

NASA NTRS1990

The use of MACSYMA for solving elliptic boundary value problems

A boundary method is presented for the solution of elliptic boundary value problems. An approach based on the use of complete systems of solutions is emphasized. The discussion is limited to the Dirichlet problem, even though the present method can possibly be adapted to treat other boundary value problems.

Thejll, Peter↗

NASA NTRS1992

A dynamic study of fragmentation and energy loss during high velocity impact

Research conducted under this contract can be divided into two main areas: hypervelocity (in the range up to 7 km/s) and high velocity (less than 1 km/s). Work in the former was performed at NASA-MSFC using the Light Gas Gun Facility. The lower velocity studies were conducted at Auburn University using the ballistic gun. The emphasis of the project was on the hypervelocity phenomenon especially in the characterization of the debris cloud formed by the primary impact events. Special devices were made to determine the angular distributions of momentum and energy of the debris cloud as a function of impact conditions. After several iteration processes, it was decided to concentrate on the momentum effort. Prototype devices were designed, fabricated, and tested. These devices were based on the conservation of momentum. Distributions of the debris cloud formed were measured by determining the amount of momentum transferred from the debris cloud to strategically placed pendulum measurement devices. The motion of the pendula was monitored using itegrated opto-interrupters. The distribution of momentum in the debris cloud was found to be a strong function of the impact condition. Small projectiles at high velocities were observed to produce finely dispersed debris whereas large projectiles generated discrete particles in the debris. Results also show that the momentum in the forward direction was enhanced due to the impact. This phenomenon of momentum multiplication was also observed in other studies and in computer simulations. It was initially planned to determine the energy distribution using deformation energy in a rod with strain gauges. Results from preliminary studies show that this technique is acceptable but too tedious. A new technique was explored based on measuring the heating effect of the debris cloud using an IR camera. The feasibility and sensitivity was established at Auburn University. This type of energy distribution measurement method can easily be adapted to the gas gun facility at MSFC. The objective of the lower velocity studies at Auburn was to simulate the damage produced in advanced materials by the lower energy debris cloud.

Zee, Ralph H.↗

NASA NTRS1992

A proposed study of multiple scattering through clouds up to 1 THz

A rigorous computation of the electromagnetic field scattered from an atmospheric liquid water cloud is proposed. The recent development of a fast recursive algorithm (Chew algorithm) for computing the fields scattered from numerous scatterers now makes a rigorous computation feasible. A method is presented for adapting this algorithm to a general case where there are an extremely large number of scatterers. It is also proposed to extend a new binary PAM channel coding technique (El-Khamy coding) to multiple levels with non-square pulse shapes. The Chew algorithm can be used to compute the transfer function of a cloud channel. Then the transfer function can be used to design an optimum El-Khamy code. In principle, these concepts can be applied directly to the realistic case of a time-varying cloud (adaptive channel coding and adaptive equalization). A brief review is included of some preliminary work on cloud dispersive effects on digital communication signals and on cloud liquid water spectra and correlations.

Gerace, G. C.↗

NASA NTRS1992

The steady part of the secular variation of the Earth's magnetic field

The secular variation of the Earth's magnetic field results from the effects of magnetic induction in the fluid outer core and from the effects of magnetic diffusion in the core and the mantle. Adequate observations to map the magnetic field at the core-mantle boundary extend back over three centuries, providing a model of the secular variation at the core-mantle boundary. Here we consider how best to analyze this time-dependent part of the field. To calculate steady core flow over long time periods, we introduce an adaptation of our earlier method of calculating the flow in order to achieve greater numerical stability. We perform this procedure for the periods 1840-1990 and 1690-1840 and find that well over 90 percent of the variance of the time-dependent field can be explained by simple steady core flow. The core flows obtained for the two intervals are broadly similar to each other and to flows determined over much shorter recent intervals.

Bloxham, Jeremy↗

NASA NTRS1992

Control of resonant frequencies in adaptive structures by prestressing

The natural vibration frequencies of a structure can be affected by inducing stress in the structure. The success of this kind of control of the resonant frequencies of a truss structure depends on the geometry of the structure. It is shown that in adaptive truss structures the method is effective for vibrations in less stiff directions, such as the normal direction of the plane containing all of the bars of a node, suggesting its applicability for cable, membrane, and thin plate and shell structures.

Baycan, Can M.↗

NASA NTRS1993

Numerical modeling of preburner flowfield

This work is intended to numerically predict the flowfields inside the preburner of the Space Shuttle Main Engine. The computer code (FDNS) based on pressure correction method is modified and adapted with an elliptic grid generator. The original configuration of the preburner in conjunction with downstream gas turbines has been simplified geometrically and numerically modeled at its full power in this work. The computational results are presented and qualitatively discussed with test data collected in NASA/MSFC.

Chow, A. S.↗

NASA NTRS1994

Growing Organic Crystals By The Czochralski Method

Apparatus grows high-quality single crystals of organic compounds by Czochralski method. In Czochralski process, growing crystal lifted from middle of molten material without touching walls. Because of low melting temperatures of organic crystals, glass vessels usable. Traditional method for inorganic semiconductors adapted to optically nonlinear organic materials.

Shields, Angela↗

NASA NTRS1992

Comparative study of MacCormack and TVD MacCormack schemes for three-dimensional separation at wing/body junctions in supersonic flows

A robust, discontinuity-resolving TVD MacCormack scheme containing no dependent parameters requiring adjustment is presently used to investigate the 3D separation of wing/body junction flows at supersonic speeds. Many production codes employing MacCormack schemes can be adapted to use this method. A numerical simulation of laminar supersonic junction flow is found to yield improved separation location predictions, as well as the axial velocity profiles in the separated flow region.

Lakshmanan, Balakrishnan↗

NASA NTRS1996

Improving the Performance of the Structure-Based Connectionist Network for Diagnosis of Helicopter Gearboxes

A diagnostic method is introduced for helicopter gearboxes that uses knowledge of the gear-box structure and characteristics of the 'features' of vibration to define the influences of faults on features. The 'structural influences' in this method are defined based on the root mean square value of vibration obtained from a simplified lumped-mass model of the gearbox. The structural influences are then converted to fuzzy variables, to account for the approximate nature of the lumped-mass model, and used as the weights of a connectionist network. Diagnosis in this Structure-Based Connectionist Network (SBCN) is performed by propagating the abnormal vibration features through the weights of SBCN to obtain fault possibility values for each component in the gearbox. Upon occurrence of misdiagnoses, the SBCN also has the ability to improve its diagnostic performance. For this, a supervised training method is presented which adapts the weights of SBCN to minimize the number of misdiagnoses. For experimental evaluation of the SBCN, vibration data from a OH-58A helicopter gearbox collected at NASA Lewis Research Center is used. Diagnostic results indicate that the SBCN is able to diagnose about 80% of the faults without training, and is able to improve its performance to nearly 100% after training.

Jammu, Vinay B.↗

NASA NTRS1959

Modified Matrix Method for Calculating Steady-State Span Loading on Flexible Wings in Subsonic Flight

A method is presented for shortening the computations required to determine the steady-state span loading on flexible wings in subsonic flight. The method makes use of tables of downwash factors to find the necessary aerodynamic-influence coefficients for the application of lifting-line theory. Explicit matrix equations of equilibrium are converted into a matrix power series with a finite number of terms by utilizing certain characteristic properties of matrices. The number of terms in the series is determined by a trial-and-error process dependent upon the required accuracy of the solution. Spanwise distributions of angle of attack, airload, shear, bending moment, and pitching moment are readily obtained as functions of qm(sub R) where q denotes the dynamic pressure and mR denotes the lift-curve slope of a rigid wing. This method is intended primarily to make it practical to solve steady-state aeroelastic problems on the ordinary manually operated desk calculators, but the method is also readily adaptable to automatic computing equipment.

Gainer, Patrick A.↗

NASA NTRS2000

Composite Tank Development

This paper presents viewgraphs on composite tank development. There is a need for oxidizer tanks and reliable, lightweight fuel. The need for cost-effective and scalable manufacturing is also evident. In order to achieve these goals, tooling methods for tank development must be applied, methods for producing easily adaptable and scalable vessel liners must be developed, insulation layer or protective barriers for containers must be manufactured, and an appropriate fiber/resin system for composite overwrap structures must be identified.

DeLay, Thomas K.↗

NASA NTRS2000

Experimental Verification of Electric Drive Technologies Based on Artificial Intelligence Tools

In this report, a fully integrated prototype of a flight servo control system is successfully developed and implemented using brushless dc motors. The control system is developed by the fuzzy logic theory, and implemented with a multilayer neural network. First, a neural network-based architecture is introduced for fuzzy logic control. The characteristic rules and their membership functions of fuzzy systems are represented as the processing nodes in the neural network structure. The network structure and the parameter learning are performed simultaneously and online in the fuzzy-neural network system. The structure learning is based on the partition of input space. The parameter learning is based on the supervised gradient decent method, using a delta adaptation law. Using experimental setup, the performance of the proposed control system is evaluated under various operating conditions. Test results are presented and discussed in the report. The proposed learning control system has several advantages, namely, simple structure and learning capability, robustness and high tracking performance and few nodes at hidden layers. In comparison with the PI controller, the proposed fuzzy-neural network system can yield a better dynamic performance with shorter settling time, and without overshoot. Experimental results have shown that the proposed control system is adaptive and robust in responding to a wide range of operating conditions. In summary, the goal of this study is to design and implement-advanced servosystems to actuate control surfaces for flight vehicles, namely, aircraft and helicopters, missiles and interceptors, and mini- and micro-air vehicles.

Rubaai, Ahmed↗

NASA NTRS2001

Multidisciplinary Design Optimization of a Full Vehicle with High Performance Computing

Multidisciplinary design optimization (MDO) of a full vehicle under the constraints of crashworthiness, NVH (Noise, Vibration and Harshness), durability, and other performance attributes is one of the imperative goals for automotive industry. However, it is often infeasible due to the lack of computational resources, robust simulation capabilities, and efficient optimization methodologies. This paper intends to move closer towards that goal by using parallel computers for the intensive computation and combining different approximations for dissimilar analyses in the MDO process. The MDO process presented in this paper is an extension of the previous work reported by Sobieski et al. In addition to the roof crush, two full vehicle crash modes are added: full frontal impact and 50% frontal offset crash. Instead of using an adaptive polynomial response surface method, this paper employs a DOE/RSM method for exploring the design space and constructing highly nonlinear crash functions. Two NMO strategies are used and results are compared. This paper demonstrates that with high performance computing, a conventionally intractable real world full vehicle multidisciplinary optimization problem considering all performance attributes with large number of design variables become feasible.

Yang, R. J.↗

NASA NTRS1994

Psychophysiology of Humans in Space

Psychophysiological methods can provide aerospace medicine investigators with a unique perspective on the diagnosis and treatment of biomedical problems of humans in space. As psychophysiologists, we measure physiological responses to environmental stressors as a means of assessing and modifying their effects on behavior and performance. In the course of an 20-year research program. we have determined that this approach can be used to: (1) objectively identify physiological correlates of discomfort, malaise and performance; and (2) correct autonomic nervous system (ANS) disturbance and thereby increase tolerance to environmental stressors without the need for pharmacological intervention. The research presented will describe the application of psychophysiological methods for studying human adaptation to space and developing behavioral medicine techniques for facilitating this adaptation as well a readaptation to Earth. The goal of this work is to enhance the safety, comfort and operational efficiency of passengers and crew during spaceflight.

Cowings, P.S.↗

NASA NTRS2001

Terrestrial Environmental Variables Derived From EOS Platform Sensors

The three main objectives of the overall project were: 1. Adaptation of environmental constraint methods to take advantage of EOS sensors, specifically, MODIS, ASTER, and Landsat-7, in addition to the PM AVHRR observations 2. Refinement of environmental constraint methods based on fundamental scientific knowledge. 3. Assessment of spatial scaling patterns in environmental constraint measurements to evaluate the potential biases and errors that occur when estimating regional and global-scale NPP patterns with moderate to coarse satellite observations. These goals were modified because, on one hand, MODIS data did not become available until after the first year of the project and because of project staffing issues at the University of Maryland., The OSU portion of the project contained a modest amount of funding and responsibility compared to the University of Maryland and the University of Toledo.

Stadler, Stephen J.↗

NASA NTRS2004

Stress Distribution During Deformation of Polycrystalline Aluminum by Molecular-Dynamics and Finite-Element Modeling

In this paper, a multiscale modelling strategy is used to study the effect of grain-boundary sliding on stress localization in a polycrystalline microstructure with an uneven distribution of grain size. The development of the molecular dynamics (MD) analysis used to interrogate idealized grain microstructures with various types of grain boundaries and the multiscale modelling strategies for modelling large systems of grains is discussed. Both molecular-dynamics and finite-element (FE) simulations for idealized polycrystalline models of identical geometry are presented with the purpose of demonstrating the effectiveness of the adapted finite-element method using cohesive zone models to reproduce grain-boundary sliding and its effect on the stress distribution in a polycrystalline metal. The yield properties of the grain-boundary interface, used in the FE simulations, are extracted from a MD simulation on a bicrystal. The models allow for the study of the load transfer between adjacent grains of very different size through grain-boundary sliding during deformation. A large-scale FE simulation of 100 grains of a typical microstructure is then presented to reveal that the stress distribution due to grain-boundary sliding during uniform tensile strain can lead to stress localization of two to three times the background stress, thus suggesting a significant effect on the failure properties of the metal.

Yamakov, V.↗