Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerated aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Warming accelerates decomposition of decades-old carbon in forest soils

Global climate carbon-cycle models predict acceleration of soil organic carbon losses to the atmosphere with warming, but the size of this feedback is poorly known. The temperature sensitivity of soil carbon decomposition is commonly determined by measuring changes in the rate of carbon dioxide (CO 2 ) production under controlled laboratory conditions. We added measurements of carbon isotopes in respired CO 2 to constrain the age of carbon substrates contributing to the temperature response of decomposition for surface soils from two temperate forest sites with very different overall rates of carbon cycling. Roughly one-third of the carbon respired at any temperature was fixed from the atmosphere more than 10 y ago, and the mean age of respired carbon reflected a mixture of substrates of varying ages. Consistent with global ecosystem model predictions, the temperature sensitivity of the carbon fixed more than a decade ago was the same as the temperature sensitivity for carbon fixed less than 10 y ago. However, we also observed an overall increase in the mean age of carbon respired at higher temperatures, even correcting for potential substrate limitation effects. The combination of several age constraints from carbon isotopes showed that warming had a similar effect on respiration of decades-old and younger (<10 y) carbon but a greater effect on decomposition of substrates of intermediate (between 7 and 13 y) age. Our results highlight the vulnerability of soil carbon to warming that is years-to-decades old, which makes up a large fraction of total soil carbon in forest soils globally.

54 ENVIRONMENTAL SCIENCES↗

Hypofractionated Accelerated Radiotherapy Using Concomitant Intensity-Modulated Radiotherapy Boost Technique for Localized High-Risk Prostate Cancer: Acute Toxicity Results

Purpose: To evaluate the acute toxicities of hypofractionated accelerated radiotherapy (RT) using a concomitant intensity-modulated RT boost in conjunction with elective pelvic nodal irradiation for high-risk prostate cancer. Methods and Materials: This report focused on 66 patients entered into this prospective Phase I study. The eligible patients had clinically localized prostate cancer with at least one of the following high-risk features (Stage T3, Gleason score {>=}8, or prostate-specific antigen level >20 ng/mL). Patients were treated with 45 Gy in 25 fractions to the pelvic lymph nodes using a conventional four-field technique. A concomitant intensity-modulated radiotherapy boost of 22.5 Gy in 25 fractions was delivered to the prostate. Thus, the prostate received 67.5 Gy in 25 fractions within 5 weeks. Next, the patients underwent 3 years of adjuvant androgen ablative therapy. Acute toxicities were assessed using the Common Terminology Criteria for Adverse Events, version 3.0, weekly during treatment and at 3 months after RT. Results: The median patient age was 71 years. The median pretreatment prostate-specific antigen level and Gleason score was 18.7 ng/L and 8, respectively. Grade 1-2 genitourinary and gastrointestinal toxicities were common during RT but most had settled at 3 months after treatment. Only 5 patients had acute Grade 3 genitourinary toxicity, in the form of urinary incontinence (n = 1), urinary frequency/urgency (n = 3), and urinary retention (n = 1). None of the patients developed Grade 3 or greater gastrointestinal or Grade 4 or greater genitourinary toxicity. Conclusion: The results of the present study have indicated that hypofractionated accelerated RT with a concomitant intensity-modulated RT boost and pelvic nodal irradiation is feasible with acceptable acute toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Time-temperature-stress capabilities of composite materials for advanced supersonic technology application, phase 1

Implementation of metal and resin matrix composites into supersonic vehicle usage is contingent upon accelerating the demonstration of service capacity and design technology. Because of the added material complexity and lack of extensive service data, laboratory replication of the flight service will provide the most rapid method of documenting the airworthiness of advanced composite systems. A program in progress to determine the time temperature stress capabilities of several high temperature composite materials includes thermal aging, environmental aging, fatigue, creep, fracture, and tensile tests as well as real time flight simulation exposure. The program has two parts. The first includes all the material property determinations and aging and simulation exposures up through 10,000 hours. The second continues these tests up to 50,000 cumulative hours. Results are presented of the 10,000 hour phase, which has now been completed.

Kerr, J. R.↗

Defining the Optimal Planning Target Volume in Image-Guided Stereotactic Radiosurgery of Brain Metastases: Results of a Randomized Trial

Purpose: To identify an optimal margin about the gross target volume (GTV) for stereotactic radiosurgery (SRS) of brain metastases, minimizing toxicity and local recurrence. Methods and Materials: Adult patients with 1 to 3 brain metastases less than 4 cm in greatest dimension, no previous brain radiation therapy, and Karnofsky performance status (KPS) above 70 were eligible for this institutional review board–approved trial. Individual lesions were randomized to 1- or 3- mm uniform expansion of the GTV defined on contrast-enhanced magnetic resonance imaging (MRI). The resulting planning target volume (PTV) was treated to 24, 18, or 15 Gy marginal dose for maximum PTV diameters less than 2, 2 to 2.9, and 3 to 3.9 cm, respectively, using a linear accelerator–based image-guided system. The primary endpoint was local recurrence (LR). Secondary endpoints included neurocognition Mini-Mental State Examination, Trail Making Test Parts A and B, quality of life (Functional Assessment of Cancer Therapy-Brain), radionecrosis (RN), need for salvage radiation therapy, distant failure (DF) in the brain, and overall survival (OS). Results: Between February 2010 and November 2012, 49 patients with 80 brain metastases were treated. The median age was 61 years, the median KPS was 90, and the predominant histologies were non–small cell lung cancer (25 patients) and melanoma (8). Fifty-five, 19, and 6 lesions were treated to 24, 18, and 15 Gy, respectively. The PTV/GTV ratio, volume receiving 12 Gy or more, and minimum dose to PTV were significantly higher in the 3-mm group (all P<.01), and GTV was similar (P=.76). At a median follow-up time of 32.2 months, 11 patients were alive, with median OS 10.6 months. LR was observed in only 3 lesions (2 in the 1 mm group, P=.51), with 6.7% LR 12 months after SRS. Biopsy-proven RN alone was observed in 6 lesions (5 in the 3-mm group, P=.10). The 12-month DF rate was 45.7%. Three months after SRS, no significant change in neurocognition or quality of life was observed. Conclusions: SRS was well tolerated, with low rates of LR and RN in both cohorts. However, given the higher potential risk of RN with a 3-mm margin, a 1-mm GTV expansion is more appropriate.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hyperfractionated Accelerated Radiotherapy (HART) for Anaplastic Thyroid Carcinoma: Toxicity and Survival Analysis

Purpose: Anaplastic thyroid carcinoma (ATC) is one of the most aggressive cancers, and the current protocol of hyperfractionated accelerated radiotherapy was initiated to improve survival while limiting toxicities. Methods and Materials: All patients with ATC from 1991 to 2002 were accrued and received megavoltage radiotherapy from the mastoid processes to the carina up to 60 Gy in twice-daily fractions of 1.8 and 2 Gy, 6 hours apart. Results: Thirty-one patients were accrued with a median age of 69 years, and 55% were women. Debulking was performed in 26%, and total thyroidectomy, in 6%, whereas 68% received radical radiotherapy alone. Local control data were available for 27 patients: 22% had a complete response, 26% had a partial response, 15% showed progressive disease, and 37% showed static disease. Median overall survival for all 31 patients was 70 days (95% confidence interval, 40-99). There was no significant difference in median survival between patients younger (70 days) and older than 70 years (42 days), between men (70 days) and women (49days), and between patients receiving postoperative radiotherapy (77 days) and radical radiotherapy alone (35 days). Grade III or higher skin erythema was seen in 56% patients; desquamation in 21%; dysphagia in 74%; and esophagitis in 79%. Conclusion: The current protocol failed to offer a significant survival benefit, was associated with severe toxicities, and thus was discontinued. There is a suggestion that younger patients with operable disease have longer survival, but this would require a larger study to confirm it.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Recent Improvements to CHEF, a Framework for Accelerator Computations

CHEF is body of software dedicated to accelerator related computations. It consists of a hierarchical set of libraries and a stand-alone application based on the latter. The implementation language is C++; the code makes extensive use of templates and modern idioms such as iterators, smart pointers and generalized function objects. CHEF has been described in a few contributions at previous conferences. In this paper, we provide an overview and discuss recent improvements. Formally, CHEF refers to two distinct but related things: (1) a set of class libraries; and (2) a stand-alone application based on these libraries. The application makes use of and exposes a subset of the capabilities provided by the libraries. CHEF has its ancestry in efforts started in the early nineties. At that time, A. Dragt, E. Forest [2] and others showed that ring dynamics can be formulated in a way that puts maps rather than Hamiltonians, into a central role. Automatic differentiation (AD) techniques, which were just coming of age, were a natural fit in a context where maps are represented by their Taylor approximations. The initial vision, which CHEF carried over, was to develop a code that (1) concurrently supports conventional tracking, linear and non-linear map-based techniques (2) avoids 'hardwired' approximations that are not under user control (3) provides building blocks for applications. C++ was adopted as the implementation language because of its comprehensive support for operator overloading and the equal status it confers to built-in and user-defined data types. It should be mentioned that acceptance of AD techniques in accelerator science owes much to the pioneering work of Berz [1] who implemented--in fortran--the first production quality AD engine (the foundation for the code COSY). Nowadays other engines are available, but few are native C++ implementations. Although AD engines and map based techniques are making their way into more traditional codes e.g. [5], it is also probably fair to say that map-oriented codes are still perceived as a specialized niche.

43 PARTICLE ACCELERATORS↗

Intraoperative Radiotherapy in Early-Stage Breast Cancer: Results of the Montpellier Phase II Trial

Purpose: We recently presented the intraoperative radiotherapy (IORT) technique given as a reliable alternative to conventional boost radiation after breast-conserving surgery. The low crude numbers of recurrence in elderly patients led us to investigate the feasibility and the efficacy of this procedure as a sole treatment. Methods and Materials: We included 94 patients older than 65 years in this phase II trial. Among them, 42 patients presented with all the inclusion criteria, i.e., stages pT0 to pT1 and pN0, ductal invasive unifocal carcinoma, and tumor-free margin of >2 mm. IORT was delivered using a dedicated linear accelerator. One 21-Gy fraction was prescribed and specified at the 90% isodose, using electrons. In vivo dosimetry was performed for all patients. The primary endpoint was the quality index. Secondary endpoints were quality of life, local recurrences, cosmetic results, and specific and overall rates of survival. Results: The median follow-up was 30 months (range, 12-49 months), and median age was 72 years (range, 66-80 years). The median tumor diameter was 10 mm. All patients received the total prescribed dose. No acute grade 3 toxicities were observed. Endpoints for all but one patient corresponded to acceptable quality index criteria. Pretreatment quality-of-life scores were maximal, and no significant decrease was observed during follow-up. Cosmesis was good to excellent at 6 months. Two patients experienced recurrence but underwent salvage mastectomy. Conclusion: Our results confirm that exclusive partial-breast IORT is feasible for treating early-stage breast cancer in the elderly. IORT may be considered an alternative treatment for a selected population and offers a safe one-step treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Equilibrium wave spectrum and sea state bias in satellite altimetry

For a well-developed sea at equilibrium with a constant wind, the energy-containing range of the wavenumber spectrum for wind-generated gravity waves is approximated by a generalized power law involving the angular spread function and mu, interpreted as a fractal codimension of a small surface patch. Dependence of mu on the wave age is estimated, and the 'Phillips constant', beta, along with the low-wavenumber boundary, k0, of the inertial subrange are analyzed on the basis of the wave action and energy conservation principles. The resulting expressions are employed to evaluate various non-Gaussian statistics of a weakly nonlinear sea surface, which determine the sea state bias in satellite altimetry. The locally accelerated decay of the spectral density function in a high-wavenumber dissipation subrange is pointed out as an important factor of wave dynamics and the geometrical optics treatment of the sea state bias. The analysis is carried out in the approximation of a unidirectional wave field and confined to the case of a well-developed sea.

Glazman, Roman E.↗

Soft X-ray properties of the Geminga pulsar

A soft-X-ray spectrum and pulse profile of the gamma-ray pulsar Geminga, obtained with the ROSAT instrument, was analyzed and interpreted in terms of thermal emission from the surface of the neutron star. It was found that the X-ray spectrum of Geminga consists of two blackbody components, one with T1 = (5.2 +/- 1.0) x 10 exp 5 K (which is in the range of model cooling curves for a neutron star of age 3 x 10 exp 5 yr) and the other with T2 = about 3 x 10 exp 6 K. The soft X-ray component is interpreted as photospheric cooling of much of the neutron star's surface area, while the small, hot region could be part of the much smaller polar cap heated by energetic particles flowing inward from the magnetospheric accelerator which is responsible for the production of Geminga gamma-rays.

Halpern, J. P.↗

Design of Removable Shield Modules for Nuclear Plant Applications Using Monte Carlo Modeling - 16264

A new modular shielding system has been designed and developed for nuclear plant applications as a replacement for traditional concrete blocks and plugs. The shield comprises interlocking modules that are custom designed using CAD and Monte Carlo modelling methods. The key benefit of these new modules is that they can be quickly removed and re-installed to allow temporary access to high radiation environments e.g. for maintenance and repair of plant equipment at nuclear power plants or waste handling facilities. The traditional method for construction of these removable concrete blocks and plugs was to cast them in place. Within the aging fleet of commercial reactors, some plants are experiencing concrete degradation of these shield blocks and plugs as well as failure of lifting points. Additionally, the existing plugs are difficult to remove and re-install. The new modular system comprises a rigid steel enclosure filled with lead that can be installed in a fraction of the normal time. This approach can accelerate outage times leading to reduced dose uptake to operators and provide significant long term cost savings. Use of Monte Carlo methods enables the shielding modules to be designed efficiently for neutron and gamma ray attenuation with the minimum necessary thickness of lead and steel. Furthermore, the modelling ensures the design is not compromised by streaming pathways, for example at the overlaps between modules or through internal structural components. Shielding modules were supplied to the Brunswick Nuclear Power station (BNP), operated by Duke Energy, located in southeast United States. These modules have been installed to replace concrete shield plugs that are located on the roof above a Feed Water Heaters (FWH) bay. While specific in application, this project demonstrates that the shield module design concept could be expanded to address vertical block walls routinely found in personnel and equipment access hatches. This approach is applicable to a wide variety of new and existing nuclear facilities and will lead to improved safety and reduced lifetime costs all the way through to future decommissioning and dismantling operations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Direct in-situ observation of early age void evolution in sustainable cement paste containing fly ash or limestone

This paper uses fast X-ray Computed Tomography (fCT) to study the change in air-filled voids during hydration of portland cement pastes of different water to cement ratios and with fly ash and limestone additives between 30 min and 12 h of hydration with deionized and de-aired water. For the deionized samples, the total volume of the air-filled voids increased during the induction period and decreased as the acceleration period began and finally stayed constant. The samples with 20% replacement of fly ash and 20% replacement of limestone showed the same trends as the OPC samples but with a reduction in the observed air-filled void formation. The air-filled void distribution in these samples changed from a limited number of large voids at the beginning of the measurements to a system with a significantly greater number of uniformly distributed smaller voids. The changes in the air-filled voids were not significant in pastes made with 50% fly ash or with de-aired water in the same testing condition. This might be explained by differences in pore solution chemistry and a reduced amount of dissolved air in the mixing water. A mechanism is proposed for a change in ionic concentration in solution to cause release of the dissolved air within the mixing water.

Cement hydration↗

Dedicated Linear Accelerator Radiosurgery for Trigeminal Neuralgia: A Single-Center Experience in 179 Patients With Varied Dose Prescriptions and Treatment Plans

Purpose: Dedicated linear accelerator radiosurgery (D-LINAC) has become an important treatment for trigeminal neuralgia (TN). Although the use of gamma knife continues to be established, few large series exist using D-LINAC. The authors describe their results, comparing the effects of varied target and dose regimens. Methods and Materials: Between August 1995 and January 2008, 179 patients were treated with D-LINAC radiosurgery. Ten patients (5.58%) had no clinical follow-up. The median age was 74.0 years (range, 32-90 years). A total of 39 patients had secondary or atypical pain, and 130 had idiopathic TN. Initially, 28 patients received doses between 70 and 85 Gy, with the 30% isodose line (IDL) touching the brainstem. Then, using 90 Gy, 82 consecutive patients were treated with a 30% IDL and 59 patients with a 50% IDL tangential to the pons. Results: Of 169 patients, 134 (79.3%) experienced significant relief at a mean of 28.8 months (range, 5-142 months). Average time to relief was 1.92 months (range, immediate to 6 months). A total of 31 patients (19.0%) had recurrent pain at 13.5 months. Of 87 patients with idiopathic TN without prior procedures, 79 (90.8%) had initial relief. Among 28 patients treated with 70 Gy and 30% IDL, 18 patients (64.3%) had significant relief, and 10 (35.7%) had numbness. Of the patients with 90 Gy and 30% IDL at the brainstem, 59 (79.0%) had significant relief and 48.9% had numbness. Among 59 consecutive patients with similar dose but the 50% isodoseline at the brainstem, 49 patients (88.0%) had excellent/good relief. Numbness, averaging 2.49 on a subjective scale of 1 to 5, was experienced by 49.7% of the patients, Conclusions: Increased radiation dose and volume of brainstem irradiation may improve clinical outcomes with the trade-off of trigeminal dysfunction. Further study of the implications of dose and target are needed to optimize outcomes and to minimize complications.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy

Creep deformation and cavitation were investigated at 300 ºC in both tension and compression for an additively manufactured Al-8.6Cu-0.5Mn-0.9Zr (wt%) alloy in the as-fabricated state and after various aging treatments (aging at 300 °C/200 h or 350 °C/24 h and overaging at 400 °C/200 h). Creep mechanisms at 300 °C were determined by relating the measured creep response to corresponding microstructural and X-ray computed tomography observations. In compression, alloys in the as-fabricated and two aging conditions exhibited similarly high creep resistance. Overaging (400 °C/200 h) led to substantial coarsening of intragranular θ-Al2Cu precipitates and an expected drop in their Orowan strengthening contribution. In tension, minimum strain rates comparable to those in compression were obtained at any given stress; however, upon accumulation of some plastic strain in the matrix, creep cavities started to form, leading to accelerated tertiary stage creep deformation and rupture. Cavitation occurred exclusively along melt pool boundaries due to locally enhanced diffusion enabled by (i) large grain-boundary area in adjacent fine-grained zones and (ii) localization of creep strain in nearby heat-affected zones. Although cavity growth was initially diffusion-controlled, its rate was determined by matrix creep rate, consistent with constrained cavity growth mechanisms. This study reveals how microstructural complexities induced by the additive manufacturing process affect the creep and cavitation behavior of Al-Cu-Mn-Zr alloys. The underlying creep and cavitation mechanisms uncovered in this study point to pathways that improve the high-temperature properties of additively manufactured alloys.

36 MATERIALS SCIENCE↗

Time-temperature-stress capabilities of composite materials for advanced supersonic technology application

Advanced composites will play a key role in the development of the technology for the design and fabrication of future supersonic vehicles. However, incorporating the material into vehicle usage is contingent on accelerating the demonstration of service capacity and design technology. Because of the added material complexity and lack of extensive data, laboratory replication of the flight service will provide the most rapid method to document the airworthiness of advanced composite systems. Consequently, a laboratory program was conducted to determine the time-temperature-stress capabilities of several high temperature composites. Tests included were thermal aging, environmental aging, fatigue, creep, fracture, tensile, and real-time flight simulation exposure. The program had two phases. The first included all the material property determinations and aging and simulation exposures up through 10,000 hours. The second continued these tests up to 50,000 cumulative hours. This report presents the results of the Phase 1 baseline and 10,000-hr aging and flight simulation studies, the Phase 2 50,000-hr aging studies, and the Phase 2 flight simulation tests, some of which extended to almost 40,000 hours.

Kerr, James R.↗

Surface Exposure History of Asteroid Bennu Based on Cosmogenic Radionuclides in OSIRIS-Rex Samples

The surface of asteroid Bennu changes over time because of impacts, mass movement, and particle ejections [1-4]. The OSIRIS-REx samples were collected from a 20-m-diameter crater on Bennu called Hokioi. One of the driving hypotheses of the mission is that Hokioi is part of a population of small (<25 m) craters that are less than 0.1 Myr old and contain relatively unweathered material [1,4]. Our goal is to understand the recent surface exposure history of Bennu, utilizing radionuclides (10Be, 26Al, 36Cl, 41Ca) produced by both galactic and solar cosmic rays. We received ~12 mg of aggregate sample OREX-803014-0. We picked five of the larger particles with masses ranging from 0.24 to 0.68 mg. We dissolved each particle, along with 0.15 mg Be and 1.0 mg Cl carrier, in HF/HNO3 mixture, and did the same for the remaining aggregate sample of 9.8 mg. After dissolution, we took a small aliquot for chemical analysis, added 0.7 mg of Al carrier, and separated Be, Al, and Cl for analysis of cosmogenic 10Be, 26Al, and 36Cl by accelerator mass spectrometry [5]. Preliminary 26Al results show concentrations of 21–27 dpm/kg for the Bennu samples, with an average of 22.5 ± 0.6 dpm/kg for the five particles and 21.1 ± 0.7 dpm/kg for the remaining aggregate. These values are close to the expected 26Al saturation values of 25–30 dpm/kg for the top 1 m of Bennu’s regolith, suggesting a minimum exposure age of 1.5–2.0 Myr near the surface. Our initial Bennu results also resemble those found for Ryugu samples [6,7]; thus, we can hypothesize that the two asteroids have had similar surface exposure histories.

K C Welten↗

Advanced Simulation and Computing: ASC FY24 Implementation Plan

The DOE National Nuclear Security Administration (NNSA) Stockpile Stewardship Program (SSP) is an integrated technical program for maintaining the safety, security, and reliability of the U.S. nuclear stockpile. The SSP incorporates nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. The suite of data analyzed comes from activities including previous nuclear tests, stockpile surveillance, experimental research, and development and engineering programs. This integrated national program requires the continued use of experimental facilities and the computational capabilities to support the SSP missions. These component parts, in addition to an appropriately scaled production capability, enable NNSA to support stockpile requirements. The ultimate goal of the SSP, and thus of the Advanced Simulation and Computing (ASC) program, is to ensure that the U.S. maintains a safe, secure, and effective strategic deterrent. The ASC program is a cornerstone of the SSP, providing simulation capabilities and computational resources to support the annual stockpile assessment and certification process, study advanced nuclear weapons design and manufacturing processes, analyze accident scenarios and weapons aging, and provide the tools to enable stockpile Life Extension Programs (LEPs) and the resolution of Significant Finding Investigations (SFIs). This work requires a balance of resources, including technical staff, hardware, simulation software, and computer science solutions. The ASC program focuses on increasing the predictive capabilities in a three-dimensional (3D) simulation environment while maintaining support to the SSP. The Program continues to improve its unique tools for understanding and solving progressively more difficult stockpile problems (sufficient resolution, dimensionality, and scientific details), and quantifying critical margins and uncertainties. Resolving each issue requires increasingly difficult analyses because the aging process has progressively moved the stockpile further from the original test base. While the focus remains on the U.S. nuclear weapons program, where possible, the Program also enables the use of high-performance computing (HPC) and simulation tools to address broader national security needs, such as foreign nuclear weapon assessments and nuclear counterterrorism. The 2022 Nuclear Posture Review (NPR) calls for NNSA to “deliver a modern, adaptive nuclear security enterprise based on an integrated strategy for risk management, production-based resilience, science and technology innovation, and workforce initiatives.” Furthermore, “NNSA will establish a Science and Technology Innovation Initiative to accelerate the integration of science and technology (S&T) throughout its activities.” Executing this strategy necessitates the continued emphasis on developing and sustaining high-quality scientific and engineering staff, as well as supporting computational and experimental capabilities. These components constitute the foundation of the nuclear weapons program. The continued success of the SSP and LEPs is predicated upon the ability to credibly certify the stockpile, without a return to underground nuclear tests (UGTs). Shortly after the nuclear test moratorium entered into force in 1992, the Accelerated Strategic Computing Initiative (ASCI) was established to provide an extensive simulation capability to underpin stockpile certification. While computing and simulation have always been essential to the success of the nuclear weapons program, the program goal of ASCI was to execute NNSA’s vision of using these tools in support of the stockpile stewardship mission. The ASCI program was essential to the successful demonstration of the SSP, providing critical nuclear weapons simulation and modeling capabilities. ASCI officially evolved into the ASC program in fiscal year (FY) 2005, but the mission remains essentially the same: provide the simulation and computational capabilities that underpin the ability to maintain a safe, secure, effective nuclear weapon stockpile, without returning to underground nuclear testing. The capabilities that the ASC program provides at the national laboratories play a vital role in the nuclear security enterprise and are necessary for fulfilling the stockpile stewardship and life extension requirements outlined for NNSA. The Program develops modern simulation tools that provide insights into stockpile aging issues, provide the computational and simulation tools that enable designers and analysts to certify the current stockpile and life-extended nuclear weapons, and inform the decision-making process when any modifications in nuclear warheads or the associated manufacturing processes are deemed necessary. Furthermore, ASC is enhancing the predictive simulation capabilities that are essential to evaluate weapons effects, design experiments, and ensure test readiness. The ASC program continues to improve its unique tools to solve stockpile problems— with a focus on sufficient resolution, dimensionality, and scientific detail—to enable Quantification of Margins and Uncertainties (QMU) and to resolve the increasingly difficult analyses needed for stockpile stewardship. The needs of the Stockpile Management and Production Modernization programs (formerly Directed Stockpile Work) also drive the requirements for simulation and computational resources. These requirements include planned LEPs, stockpile support activities, and mitigation efforts against the potential for technical surprise. All of the weapons within the current stockpile are in some stage of the life extension process. The simulation and computational capabilities are crucial for successful execution of these life extensions and for ensuring NNSA can certify these life-extended weapons without conducting a UGT.

97 MATHEMATICS AND COMPUTING↗

A Phase I Study of Short-Course Accelerated Whole Brain Radiation Therapy for Multiple Brain Metastases

Purpose: To define the maximum tolerated dose (MTD) of a SHort-course Accelerated whole brain RadiatiON therapy (SHARON) in the treatment of patients with multiple brain metastases. Methods and Materials: A phase 1 trial in 4 dose-escalation steps was designed: 12 Gy (3 Gy per fraction), 14 Gy (3.5 Gy per fraction), 16 Gy (4 Gy per fraction), and 18 Gy (4.5 Gy per fraction). Eligibility criteria included patients with unfavorable recursive partitioning analysis (RPA) class > or =2 with at least 3 brain metastases or metastatic disease in more than 3 organ systems, and Eastern Cooperative Oncology Group (ECOG) performance status {<=}3. Treatment was delivered in 2 days with twice-daily fractionation. Patients were treated in cohorts of 6-12 to define the MTD. The dose-limiting toxicity (DLT) was defined as any acute toxicity {>=}grade 3, according to the Radiation Therapy Oncology Group scale. Information on the status of the main neurologic symptoms and quality of life were recorded. Results: Characteristics of the 49 enrolled patients were as follows: male/female, 30/19; median age, 66 years (range, 23-83 years). ECOG performance status was <3 in 46 patients (94%). Fourteen patients (29%) were considered to be in recursive partitioning analysis (RPA) class 3. Grade 1-2 acute neurologic (26.4%) and skin (18.3%) toxicities were recorded. Only 1 patient experienced DLT (neurologic grade 3 acute toxicity). With a median follow-up time of 5 months (range, 1-23 months), no late toxicities have been observed. Three weeks after treatment, 16 of 21 symptomatic patients showed an improvement or resolution of presenting symptoms (overall symptom response rate, 76.2%; confidence interval 0.95: 60.3-95.9%). Conclusions: Short-course accelerated radiation therapy in twice-daily fractions for 2 consecutive days is tolerated up to a total dose of 18 Gy. A phase 2 study has been planned to evaluate the efficacy on overall survival, symptom control, and quality of life indices.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

3D printing of calcined clay-limestone-based cementitious materials

This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC content reduced the slump, flowability and initial material flow rate, and significantly improved the buildability of fresh mixtures, which can be attributed to the reduced water film thickness (WFT). Furthermore, the stiffness evolution and SSA{sub total} development up to the first 3 h were accelerated by increasing CC content, which can also be linked to the change of WFT, and consumption of superplasticizer for the dispersion induced by hydration products. Additionally, the dilution effect on compressive strength and hydration caused by the high cement replacement was observed.

36 MATERIALS SCIENCE↗