Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZIRCONIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Influence of annealing temperature on electronic and dielectric properties of ZrO{sub 2} thin films on Si

Zirconium oxide (ZrO{sub 2}) films were deposited on (100) silicon substrates by DC reactive magnetron sputtering of zirconium target at an oxygen partial pressure of 6 Multiplication-Sign 10{sup -2} Pa. The as-deposited films were annealed in air for 1 hour at different temperatures in the range 773 - 1173 K. The influence of annealing temperature on the structural properties of ZrO{sub 2} films and the electrical properties like Capacitance-Voltage and Current-Voltage of the capacitors of the type Al/ZrO{sub 2}/p-Si were studied. The capacitance and dielectric constant of the capacitors were found to increase with increase in annealing temperature from 773 to 973 K, however, with further increase in annealing temperature to 1173 K they were found to decrease. In addition, the leakage current density was decreased from 1 Multiplication-Sign 10{sup -6} to 4 Multiplication-Sign 10{sup -7} A/cm{sup 2} at 1V gate bias voltage and the electrical conduction mechanism was dominated by Schottky emission for all the films in lower electric fields.

36 MATERIALS SCIENCE↗

A medium-energy photoemission and ab-initio investigation of cubic yttria-stabilised zirconia

Experimental and theoretical investigations into the electronic properties and structure of cubic yttria-stabilized zirconia are presented. Medium-energy x-ray photoemission spectroscopy measurements have been carried out for material with a concentration of 8-9 mol. % yttria. Resonant photoemission spectra are obtained for a range of photon energies that traverse the L2 absorption edge for both zirconium and yttrium. Through correlation with results from density-functional theory (DFT) calculations, based on structural models proposed in the literature, we assign photoemission peaks appearing in the spectra to core lines and Auger transitions. An analysis of the core level features enables the identification of shifts in the core level energies due to different local chemical environments of the constituent atoms. In general, each core line feature can be decomposed into three contributions, with associated energy shifts. Their identification with results of DFT calculations carried out for proposed atomic structures, lends support to these structural models. The experimental results indicate a multi-atom resonant photoemission effect between nearest-neighbour oxygen and yttrium atoms. Near-edge x-ray absorption fine structure spectra for zirconium and yttrium are also presented, which correlate well with calculated Zr- and Y-4d electron partial density-of-states and with Auger electron peak area versus photon energy curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deformation mechanism study of a hot rolled Zr-2.5Nb alloy by transmission electron microscopy. II. In situ transmission electron microscopy study of deformation mechanism change of a Zr-2.5Nb alloy upon heavy ion irradiation

The effect of heavy-ion irradiation on deformation mechanisms of a Zr-2.5Nb alloy was investigated by using the in situ transmission electron microscopy deformation technique. The gliding behavior of prismatic 〈a〉 dislocations has been dynamically observed before and after irradiation at room temperature and 300 °C. Irradiation induced loops were shown to strongly pin the gliding dislocations. Unpinning occurred while loops were incorporated into or eliminated by 〈a〉 dislocations. In the irradiated sample, loop depleted areas with a boundary parallel to the basal plane trace were found by post-mortem observation after room temperature deformation, supporting the possibility of basal channel formation in bulk neutron irradiated samples. Strong activity of pyramidal slip was also observed at both temperatures, which might be another important mechanism to induce plastic instability in irradiated zirconium alloys. Finally, (011{sup ¯}1)〈01{sup ¯}12〉 twinning was identified in the irradiated sample deformed at 300 °C.

36 MATERIALS SCIENCE↗

Shock loading characteristics of Zr and Ti metals using dual beam velocimeter

The characteristics of titanium and zirconium metal foils under shock loading have been studied up to 16 GPa and 12 GPa pressure, respectively, using portable electric gun setup as projectile launcher. In these experiments, the capabilities of a single Fabry-Perot velocimeter have been enhanced by implementing it in dual beam mode to record the two velocity profiles on a single streak camera. The measured equation of state data for both the metals have been found to be well in agreement with the reported Hugoniot, within experimental accuracies. A phase transition from α to ω phase has been detected near to 11.4 GPa for titanium and 8.2 GPa for zirconium in the rising part of target-glass interface velocity profile.

36 MATERIALS SCIENCE↗

Investigation of Backscatter X-ray imaging techniques for Uranium Dioxide Fuel Rods

Radiography by Selective Detection (RSD), was investigated for its ability to determine the presence and types of defects in a UO{sub 2} fuel rod surrounded by zirconium cladding. Images created using a Monte Carlo model compared favorably with actual X-ray backscatter images from mock fuel rods. A fuel rod was modeled as a rectangular parallelepiped with zirconium cladding, and pencil beam X-ray sources of 160 kVp (79 keV avg) and 480 kVp (218 keV avg) were generated using the Monte Carlo N-Particle Transport Code to attempt to image void and palladium (Pd) defects in the interior and on the surface of the fuel pellet. It was found that the 160 kVp spectrum was unable to detect the presence of interior defects, whereas the 480 kVp spectrum detected them with both the standard and the RSD backscatter methods, though the RSD method was very inefficient. It was also found that both energy spectra were able to detect void and Pd defects on the surface using both imaging methods. Additionally, two mock fuel rods were imaged using a backscatter X-ray imaging system, one consisting of hafnium pellets in a Zircaloy-4 cladding and the other consisting of steel pellets in a Zircalloy-4 cladding which was then encased in a steel cladding (a double encapsulation configuration employed in irradiation and experiments). It was found that the system was capable of detecting individual HfO{sub 2} pellets in a Zircaloy-4 cladding and may be capable of detecting individual steel pellets in the double-encapsulated sample. It is expected that the system would also be capable of detecting individual UO{sub 2} pellets in a Zircaloy-4 cladding, though no UO{sub 2} fuel rod was available for imaging.

36 MATERIALS SCIENCE↗

Experimental Study of RF Pulsed Heating

Cyclic thermal stresses produced by rf pulsed heating can be the limiting factor on the attainable reliable gradients for room temperature linear accelerators. This is especially true for structures that have complicated features for wakefield damping. These limits could be pushed higher by using special types of copper, copper alloys, or other conducting metals in constructing partial or complete accelerator structures. Here we present an experimental study aimed at determining the potential of these materials for tolerating cyclic thermal fatigue due to rf magnetic fields. A special cavity that has no electric field on the surface was employed in these studies. The cavity shape concentrates the magnetic field on one flat surface where the test material is placed. The materials tested in this study have included oxygen free electronic grade copper, copper zirconium, copper chromium, hot isostatically pressed copper, single crystal copper, electroplated copper, Glidcop(reg. sign), copper silver, and silver plated copper. The samples were exposed to different machining and heat treatment processes prior to rf processing. Each sample was tested to a peak pulsed heating temperature of approximately 110 C and remained at this temperature for approximately 10 x 10 6 rf pulses. In general, the results showed the possibility of pushing the gradient limits due to pulsed heating fatigue by the use of copper zirconium and copper chromium alloys.

36 MATERIALS SCIENCE↗

Effects of processing conditions on flash sintering of commercial ZrN

Flash sintering (FS) is a potentially rapid and low-cost manufacturing technique for advanced ceramics. There are still many unknowns about ceramic FS, especially for highly conductive high-temperature ceramics (HTC), which often display decreased bulk conductivity with increasing temperature. This study qualitatively characterizes the flash behavior of highly conductive HTC materials using zirconium nitride (ZrN) as an example. The effects of processing parameters (e.g., DC voltage/electrical field strength, voltage ramp rate, post-flash holding time, mechanical pressure, sample milling, and choice of electrode materials) on ZrN flash behavior are also qualitatively studied and linked to samples microstructure and hardness. It is observed that best densification was achieved using 5 min Spex-milled ZrN powder under 25 MPa of applied pressure and constant 8 V DC. The potential mechanism for ZrN FS and the similarity and difference from FS of conventional oxides like YSZ have been proposed based on experimental observations, and the directions for future research are also pointed out.

Flash Sintering↗

A Computational Model of the Mark-IV Electrorefiner: Phase I -- Fuel Basket/Salt Interface

Spent driver fuel from the Experimental Breeder Reactor-II (EBR-II) is currently being treated in the Mk-IV electrorefiner (ER) in the Fuel Conditioning Facility (FCF) at Idaho National Laboratory. The modeling approach to be presented here has been developed to help understand the effect of different parameters on the dynamics of this system. The first phase of this new modeling approach focuses on the fuel basket/salt interface involving the transport of various species found in the driver fuels (e.g. uranium and zirconium). This approach minimizes the guessed parameters to only one, the exchange current density (i0). U3+ and Zr4+ were the only species used for the current study. The result reveals that most of the total cell current is used for the oxidation of uranium, with little being used by zirconium. The dimensionless approach shows that the total potential is a strong function of i0 and a weak function of wt% of uranium in the salt system for initiation processes.

99 GENERAL AND MISCELLANEOUS↗

Structural reasons for the nonlinear optical properties of KTi{sub 0.96}Zr{sub 0.04}OPO{sub 4} single crystals

This paper reports on the results of the precision X-ray structural investigations of KTi{sub 0.96}Zr{sub 0.04}OPO{sub 4} single crystals at room temperature. It is established that the incorporation of zirconium atoms into the structure of KTiOPO{sub 4} (KTP) crystals does not lead to substantial changes in the framework structure and results only in an insignificant decrease in the scatter of the distances in the PO{sub 4} tetrahedra and the formation of more symmetric (TiZr)O{sub 6} octahedra as compared to the TiO{sub 6} octahedra. However, the incorporation of zirconium atoms into the KTP structure is accompanied by the redistribution of the electron density in the crystal as a whole, so that the electron density increases in the region of the positions occupied by the potassium atoms. This changes the nonlinear optical properties of the given series of crystals, which are estimated from the intensity of the second harmonic generation signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accurate Crystal Structure Refinement of La{sub 3}Ta{sub 0.25}Zr{sub 0.50}Ga{sub 5.25}O{sub 14}

An accurate X-ray diffraction study of a La{sub 3}Ta{sub 0.25}Zr{sub 0.50}Ga{sub 5.25}O{sub 14} single crystal (a = 8.2574(4) A, c = 5.1465(4) A, sp. gr. P321, Z = 1, R/R{sub w} = 0.62/0.57% for 4144 unique reflections and 91 parameters) has been performed with a simultaneous neutron diffraction analysis. Tantalum, zirconium, and gallium atoms are found to occupy the mixed octahedral position (symmetry 32). Gallium atoms and a few zirconium atoms are in the position on axis 2 in the tetrahedron. The tetrahedral position on axis 3 is completely occupied by gallium atoms, while the large polyhedron on axis 2 is occupied by lanthanum atoms. The high resolution and averaging of the results obtained in two independent X-ray experiments with the same sample provided accu- rate structural data, in particular, on the anharmonicity of thermal atomic vibrations (atomic displacements). The X-ray and neutron diffraction data on the atomic displacements are compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Elemental Analysis of a Series of KTi{sub 1–x}Zr{sub x}OPO{sub 4} Crystals

Crystals of the KTi{sub 1–x}Zr{sub x}OPO{sub 4} concentration series with a zirconium content y (in atomic fractions) in the melt ranging from 0 to 0.13 have been grown by the flux method. The Zr impurity distribution coefficient in potassium titanyl phosphate crystals at y ≤ 0.07 has been determined by two methods to be 1.64 ± 0.11. Saturation is found to occur at y > 0.07; the zirconium concentration in the samples is about x = 0.12 atomic fractions.

36 MATERIALS SCIENCE↗

The performance of NSF in BWR operating conditions - 2016-0062

NSF is a zirconium alloy in the zirconium-tin-niobium-iron family. The nominal alloy content is 1 % tin, 1 % niobium, and 0.4 % iron. The initial targeted component for NSF in boiling water reactors (BWRs) is the fuel assembly channel. A BWR fuel channel encases the fuel bundle such that boiling is confined within the channel while the water remains solid outside the channel. The BWR fuel channel also defines the gap between the bundles where the cruciform control blade inserts and withdraws to control the criticality of the core. The key performance requirements of the BWR fuel channel are dimensional stability (including both shape and thickness) and adequate mechanical properties to withstand the applied stresses. The distortion mechanisms that affect dimensional stability are fluence gradient-induced bow, shadow corrosion-induced bow, and elastic and creep bulge. Although NSF is known to have improved irradiation growth characteristics compared with both Zircaloy-2 and Zircaloy-4 that translates to increased dimensional stability in fuel channels, the BWR corrosion performance, tensile properties, and irradiation creep performance are less well known. This paper reports on the physical metallurgy of NSF, oxide thickness and hydrogen content after in-reactor operation, mechanical properties (both irradiated and unirradiated), in-reactor creep response, and irradiation growth and bow of NSF channels. (authors)

36 MATERIALS SCIENCE↗

AFIP-6 Characterization Summary Report

The AFIP-6 (ATR Full-size-plate In center flux trap Position) Characterization Summary Report outlines the fresh fuel characterization efforts performed during the AFIP-6 experiment. The AFIP-6 experiment was designed to evaluate the performance of monolithic uranium-molybdenum (U-Mo) fuels at a scale prototypic of Advanced Test Reactor (ATR) fuel plates (45-inches long). The AFIP-6 test was the first test with plates that were swaged into the rails of the assembly. This test served to examine the effects of a plate in a swaged condition with longer fuel zones (22.5-inches long), that were centered in the plate. AFIP-6 test plates employed a zirconium interlayer that was co-rolled with the fuel foil. Previous mini-plate and AFIP irradiation experiments performed in ATR have demonstrated the stable behavior of the interface between the U-Mo fuel and the zirconium interlayer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ferritic Alloys as Accident Tolerant Fuel Cladding Material for Light Water Reactors

The objective of the GE project is to demonstrate that advanced steels such as iron-chromium-aluminum (FeCrAl) alloys could be used as accident tolerant fuel cladding material in commercial light water reactors. The GE project does not include fuel development. Current findings support the concept that a FeCrAl alloy could be used for the cladding of commercial nuclear fuel. The use of this alloy will benefit the public since it is going to make the power generating light water reactors safer. In the Phase 1A of this cost shared project, GE (GRC + GNF) teamed with the University of Michigan, Los Alamos National Laboratory, Brookhaven National Laboratory, Idaho National Laboratory, and Oak Ridge National Laboratory to study the environmental and mechanical behavior of more than eight candidate cladding materials both under normal operation conditions of commercial nuclear reactors and under accident conditions in superheated steam (loss of coolant condition). The main findings are as follows: (1) Under normal operation conditions the candidate alloys (e.g. APMT, Alloy 33) showed excellent resistance to general corrosion, shadow corrosion and to environmentally assisted cracking. APMT also showed resistance to proton irradiation up to 5 dpa. (2) Under accident conditions the selected candidate materials showed several orders of magnitude improvement in the reaction with superheated steam as compared with the current zirconium based alloys. (3) Tube fabrication feasibility studies of FeCrAl alloys are underway. The aim is to obtain a wall thickness that is below 400 µm. (4) A strategy is outlined for the regulatory path approval and for the insertion of a lead fuel assembly in a commercial reactor by 2022. (5) The GE team worked closely with INL to have four rodlets tested in the ATR. GE provided the raw stock for the alloys, the fuel for the rodlets and the cost for fabrication/welding of the rodlets. INL fabricated the rodlets and the caps and welded them to provide hermetic seal. The replacement of a zirconium alloy using a ferritic material containing chromium and aluminum appears to be the most near term implementation for accident tolerant nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atom Probe characterization of neutron irradiated commercial ZIRLO® and AXIOM X2® alloys

As part of the Mechanistic Understanding of ZIrconium Corrosion (MUZIC) program, this team has been instrumental to obtain EPRI and Westinghouse sponsorships to prepare the neutron irradiated ZIRLO® and X2® from Vogtle nuclear power plant and ship them from Studsvik’s (Sweden) hot cells to Idaho National Laboratory (INL) to be part of the NSUF library. The uniqueness of these sets of neutron irradiated alloys is that they are at the same two extremes of the fuel cycles, allowing us to study the microchemistry evolution as a function of irradiation doses, exposure time and solute content. Advanced commercial Zirconium-Niobium (Zr-Nb) alloys, such as ZIRLO® and AXIOM®, have been developed by Westinghouse to enhance the corrosion resistance of fuel cladding material for longer service time. This study specifically aims at investigating the neutron irradiation induced Nb redistribution in AXIOM® X2® to understand the effect of neutron irradiation induced microchemistry changes and the irradiation enhanced corrosion resistance observed in ZrNb alloys. The detailed sample information on chemical composition and irradiation is given in shown in Table 1a and 1b respectively. To study the neutron IIP/nanoclusters and Nb concentration in the solid solution, atom probe tomography (APT) is the primary tool to obtain reliable chemical information. APT specimens were prepared in shielded focused ion beam (FIB) at the Irradiated Materials Characterization Laboratory (IMCL) at INL followed by APT analysis at CAES facility using LEAP 4000XR

36 MATERIALS SCIENCE↗

ATF Cladding Mechanical Properties Report: Capability Demonstration

This report documents mechanical testing capability demonstration activities performed in fiscal year (FY)2025 at Oak Ridge National Laboratory(ORNL)on chromium-coated (Cr-coated) and uncoated advanced zirconium alloy claddings irradiated in the High Flux Isotope Reactor (HFIR) to approximately 4 displacements per atom (dpa), corresponding to ~13GWd/t burnup. Specimens were prepared in axial tension (ATT) and ring tension (RTT) geometries, and passive silicon carbide(SiC)thermometry (TM) was employed to determine irradiation temperatures, which averaged 38–43 °C below the 330 °C design target. Mechanical testing at ambient temperature demonstrated the expected irradiation-induced hardening, with yield strength(YS)and ultimate tensile strength(UTS)values increasing substantially relative to unirradiated counterparts. However, this strengthening was accompanied by a reduction in ductility, as indicated by lower uniform and total elongations(UE and TE). Both coated and uncoated claddings exhibited similar mechanical response, though Cr-coated specimens showed surface cracking perpendicular to the loading direction, attributable to the hardness mismatch between the coating and substrate. Fracture in all cases remained ductile, and no coating spallation was observed following HFIR irradiation. Complementary efforts were directed toward the fabrication of test specimens from commercially irradiated cladding (rod 47I, ~31.1 GWd/t average burnup). Axial sectioning and computer numerical control(CNC)machining successfully produced ATT geometries suitable for benchmarking against HFIR-irradiated specimens. This capability enables direct comparison of cladding behavior between test reactor and commercial reactor environments, thereby supporting the validation of HFIR as a surrogate irradiation platform for accident tolerant fuel (ATF) development. Once HFIR irradiations are completed in FY26,the relevant comparison tests will be completed. Collectively, the FY 2025 PIE campaign has provided mechanical performance data for irradiated advanced claddings The demonstrated capabilities support the framework for mechanical testing and further evaluations in subsequent years. These efforts will represent an important contribution toward the licensing and deployment of Cr-coated zirconium alloy cladding as a near-term ATF solution.

36 MATERIALS SCIENCE↗

Co-Rolled U10Mo/Zirconium-Barrier-Layer Monolithic Fuel Foil Fabrication Process

Integral to the current UMo fuel foil processing scheme being developed at Idaho National Laboratory (INL) is the incorporation of a zirconium barrier layer for the purpose of controlling UMo-Al interdiffusion at the fuel-meat/cladding interface. A hot “co-rolling” process is employed to establish a ~25-µm-thick zirconium barrier layer on each face of the ~0.3-mm-thick U10Mo fuel foil.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic Probabilistic Risk Assessment Based Response Surface Approach for FLEX and Accident Tolerant Fuels for Medium Break LOCA Spectrum

After the Fukushima Daiichi Accident, the safety features such as accident tolerant fuel (ATF) and diverse and flexible coping strategies (FLEX) for existing nuclear fleets are being investigated by the US Department of Energy under the Light Water Reactor Sustainability Program. This research is being conducted to quantify the risk-benefit of these safety features. Dynamic probabilistic risk assessment (DPRA)-based response-surface approach has been presented to quantify the FLEX and ATF benefits by estimating the risk associated with each option. ATFs with multilayered silicon carbide (SiC), iron-chromium-aluminum, and chromium-coated zirconium cladding were considered in this study. While these ATF candidates perform better than the current zirconium cladding (Zr), they may introduce additional failure modes in some operating conditions. The fuel failure analysis modules (FAMs) were developed to investigate ATF performance. The dynamic risk assessments were performed using RAVEN, a DPRA tool, coupled with RELAP5 and FAMs. A cumulative distribution function-based index provided a mean of comparing the benefits of safety enhancements. For medium break loss of coolant accidents, FLEX operational timing window for each fuel type was estimated. Among these ATF candidates, SiC-type ATF was the most beneficial candidate for an increased safety margin than Zr-based fuel and was found to complement FLEX strategies in terms of risk and coping time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗