Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Pasteurization of shell eggs using radio frequency heating

The USDA-FSIS estimates that pasteurization of all shell eggs in the U.S. would reduce the annual number of illnesses by more than 110,000. However, less than 3% of shell eggs are commercially pasteurized. One of the main reasons for this is that the commercial hot water process requires as much as 60 min to complete. In the present study, a radio frequency (RF) apparatus was constructed, and a two-step process was developed that uses RF energy and hot water, to pasteurize eggs in less than half the time. In order to select an appropriate RF generator, the impedance of shell eggs was measured in the frequency range of 10–70 MHz. The power density within the egg was modeled to prevent potential hotspots. Escherichia coli (ATCC 35218) was inoculated in the yolk to approximately 7.5 log CFU/ml. The combination process first heated the egg in 35.0 °C water for 3.5 min using 60 MHz RF energy. This resulted in the yolk being preferentially heated to 61 °C. Then, the egg was heated for an additional 20 min with 56.7 °C water. This two-step process reduced the population of E. coli by 6.5 log. The total time for the process was 23.5 min. By contrast, processing for 60 min was required to reduce the E. coli by 6.6 log using just hot water. The novel RF pasteurization process presented in this study was considerably faster than the existing commercial process. As a result, this should lead to an increase in the percentage of eggs being pasteurized, as well as a reduction of foodborne illnesses.

42 ENGINEERING↗

RED SUPERGIANTS IN THE ANDROMEDA GALAXY (M31)

Red supergiants (RSGs) are a short-lived stage in the evolution of moderately massive stars (10-25 M{sub sun}), and as such their location in the H-R diagram provides an exacting test of stellar evolutionary models. Since massive star evolution is strongly affected by the amount of mass loss a star suffers, and since the mass-loss rates depend upon metallicity, it is highly desirable to study the physical properties of these stars in galaxies of various metallicities. Here we identify a sample of RSGs in M31, the most metal-rich of the Local Group galaxies. We determine the physical properties of these stars using both moderate resolution spectroscopy and broadband V - K photometry. We find that on average the RSGs of our sample are variable in V by 0.5 mag, smaller but comparable to the 0.9 mag found for Magellanic Cloud (MC) RSGs. No such variability is seen at K, also in accord with what we know of Galactic and MC RSGs. We find that there is a saturation effect in the model TiO band strengths with metallicities higher than solar. The physical properties we derive for the RSGs from our analysis with stellar atmosphere models agree well with the current evolutionary tracks, a truly remarkable achievement given the complex physics involved in each. We do not confirm an earlier result that the upper luminosities of RSGs depend upon metallicity; instead, the most luminous RSGs have log L/L{sub sun}{approx}5.2-5.3, broadly consistent but slightly larger than that recently observed by Smartt et al. as the upper luminosity limit to Type II-P supernovae, believed to have come from RSGs. We find that, on average, the RSGs are considerably more reddened than O and B stars, suggesting that circumstellar dust is adding a significant amount of extra extinction, {approx}0.5 mag, on average. This is in accord with our earlier findings on Milky Way and Magellanic Cloud stars. Finally, we call attention to a peculiar star whose spectrum appears to be heavily veiled, possibly due to scattering by an expanding dust shell.

79 ASTRONOMY AND ASTROPHYSICS↗

The luminosity function at z ∼ 8 from 97 Y-band dropouts: Inferences about reionization

We present the largest search to date for Y-band dropout galaxies (z ∼ 8 Lyman break galaxies, LBGs) based on 350 arcmin{sup 2} of Hubble Space Telescope observations in the V, Y, J, and H bands from the Brightest of Reionizing Galaxies (BoRG) survey. In addition to previously published data, the BoRG13 data set presented here includes approximately 50 arcmin{sup 2} of new data and deeper observations of two previous BoRG pointings, from which we present 9 new z ∼ 8 LBG candidates, bringing the total number of BoRG Y-band dropouts to 38 with 25.5 ≤ m{sub J} ≤ 27.6 (AB system). We introduce a new Bayesian formalism for estimating the galaxy luminosity function, which does not require binning (and thus smearing) of the data and includes a likelihood based on the formally correct binomial distribution as opposed to the often-used approximate Poisson distribution. We demonstrate the utility of the new method on a sample of 97 Y-band dropouts that combines the bright BoRG galaxies with the fainter sources published in Bouwens et al. from the Hubble Ultra Deep Field and Early Release Science programs. We show that the z ∼ 8 luminosity function is well described by a Schechter function over its full dynamic range with a characteristic magnitude M{sup ⋆}=−20.15{sub −0.38}{sup +0.29}, a faint-end slope of α=−1.87{sub −0.26}{sup +0.26}, and a number density of log{sub 10} ϕ{sup ⋆}[Mpc{sup −3}]=−3.24{sub −0.24}{sup +0.25}. Integrated down to M = –17.7, this luminosity function yields a luminosity density log{sub 10} ϵ[erg s{sup −1} Hz{sup −1} Mpc{sup −3}]=25.52{sub −0.05}{sup +0.05}. Our luminosity function analysis is consistent with previously published determinations within 1σ. The error analysis suggests that uncertainties on the faint-end slope are still too large to draw a firm conclusion about its evolution with redshift. We use our statistical framework to discuss the implication of our study for the physics of reionization. By assuming theoretically motivated priors on the clumping factor and the photon escape fraction we show that the UV luminosity density from galaxy samples down to M = –17.7 can ionize only 10%-50% of the neutral hydrogen at z ∼ 8. Full reionization would require extending the luminosity function down to M = –15. The data are consistent with a substantial fraction of neutral hydrogen at z > 7, in agreement with recent suggestions based on deep spectroscopy of z ∼ 8 LBGs.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINING THE COVERING FACTOR OF COMPTON-THICK ACTIVE GALACTIC NUCLEI WITH NuSTAR

The covering factor of Compton-thick (CT) obscuring material associated with the torus in active galactic nuclei (AGNs) is at present best understood through the fraction of sources exhibiting CT absorption along the line of sight (N{sub H} > 1.5 × 10{sup 24} cm{sup −2}) in the X-ray band, which reveals the average covering factor. Determining this CT fraction is difficult, however, due to the extreme obscuration. With its spectral coverage at hard X-rays (>10 keV), Nuclear Spectroscopic Telescope Array (NuSTAR) is sensitive to the AGNs covering factor since Compton scattering of X-rays off optically thick material dominates at these energies. We present a spectral analysis of 10 AGNs observed with NuSTAR where the obscuring medium is optically thick to Compton scattering, so-called CT AGNs. We use the torus models of Brightman and Nandra that predict the X-ray spectrum from reprocessing in a torus and include the torus opening angle as a free parameter and aim to determine the covering factor of the CT gas in these sources individually. Across the sample we find mild to heavy CT columns, with N{sub H} measured from 10{sup 24} to 10{sup 26} cm{sup −2}, and a wide range of covering factors, where individual measurements range from 0.2 to 0.9. We find that the covering factor, f{sub c}, is a strongly decreasing function of the intrinsic 2–10 keV luminosity, L{sub X}, where f{sub c} = (−0.41 ± 0.13)log{sub 10}(L{sub X}/erg s{sup −1})+18.31 ± 5.33, across more than two orders of magnitude in L{sub X} (10{sup 41.5}–10{sup 44} erg s{sup −1}). The covering factors measured here agree well with the obscured fraction as a function of L{sub X} as determined by studies of local AGNs with L{sub X} > 10{sup 42.5} erg s{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Training quantum neural networks using the quantum information bottleneck method

Abstract We provide in this paper a concrete method for training a quantum neural network to maximize the relevant information about a property that is transmitted through the network. This is significant because it gives an operationally well founded quantity to optimize when training autoencoders for problems where the inputs and outputs are fully quantum. We provide a rigorous algorithm for computing the value of the quantum information bottleneck quantity within error ε that requires O ( log 2 ⁡ ( 1 / ϵ ) + 1 / δ 2 ) queries to a purification of the input density operator if its spectrum is supported on { 0 } ⋃ [ δ , 1 − δ ] for δ > 0 and the kernels of the relevant density matrices are disjoint. We further provide algorithms for estimating the derivatives of the QIB function, showing that quantum neural networks can be trained efficiently using the QIB quantity given that the number of gradient steps required is polynomial.

Çatlı, Ahmet Burak (ORCID:0000000152294141)↗

Heterogeneous Multi-Domain Dataset Synthesis to Facilitate Privacy and Risk Assessments in Smart City IoT

The emergence of the Smart Cities paradigm and the rapid expansion and integration of Internet of Things (IoT) technologies within this context have created unprecedented opportunities for high-resolution behavioral analytics, urban optimization, and context-aware services. However, this same proliferation intensifies privacy risks, particularly those arising from cross-modal data linkage across heterogeneous sensing platforms. To address these challenges, this paper introduces a comprehensive, statistically grounded framework for generating synthetic, multimodal IoT datasets tailored to Smart City research. The framework produces behaviorally plausible synthetic data suitable for preliminary privacy risk assessment and as a benchmark for future re-identification studies, as well as for evaluating algorithms in mobility modeling, urban informatics, and privacy-enhancing technologies. As part of our approach, we formalize probabilistic methods for synthesizing three heterogeneous and operationally relevant data streams—cellular mobility traces, payment terminal transaction logs, and Smart Retail nutrition records—capturing the behaviors of a large number of synthetically generated urban residents over a 12-week period. The framework integrates spatially explicit merchant selection using K-Dimensional (KD)-tree nearest-neighbor algorithms, temporally correlated anchor-based mobility simulation reflective of daily urban rhythms, and dietary-constraint filtering to preserve ecological validity in consumption patterns. In total, the system generates approximately 116 million mobility pings, 5.4 million transactions, and 1.9 million itemized purchases, yielding a reproducible benchmark for evaluating multimodal analytics, privacy-preserving computation, and secure IoT data-sharing protocols. To show the validity of this dataset, the underlying distributions of these residents were successfully validated against reported distributions in published research. We present preliminary uniqueness and cross-modal linkage indicators; comprehensive re-identification benchmarking against specific attack algorithms is planned as future work. This framework can be easily adapted to various scenarios of interest in Smart Cities and other IoT applications. By aligning methodological rigor with the operational needs of Smart City ecosystems, this work fills critical gaps in synthetic data generation for privacy-sensitive domains, including intelligent transportation systems, urban health informatics, and next-generation digital commerce infrastructures.

IoT↗

THE LEECH EXOPLANET IMAGING SURVEY: CHARACTERIZATION OF THE COLDEST DIRECTLY IMAGED EXOPLANET, GJ 504 b, AND EVIDENCE FOR SUPERSTELLAR METALLICITY

As gas giant planets and brown dwarfs radiate away the residual heat from their formation, they cool through a spectral type transition from L to T, which encompasses the dissipation of cloud opacity and the appearance of strong methane absorption. While there are hundreds of known T-type brown dwarfs, the first generation of directly imaged exoplanets were all L type. Recently, Kuzuhara et al. announced the discovery of GJ 504 b, the first T dwarf exoplanet. GJ 504 b provides a unique opportunity to study the atmosphere of a new type of exoplanet with a ∼500 K temperature that bridges the gap between the first directly imaged planets (∼1000 K) and our own solar system's Jupiter (∼130 K). We observed GJ 504 b in three narrow L-band filters (3.71, 3.88, and 4.00 μm), spanning the red end of the broad methane fundamental absorption feature (3.3 μm) as part of the LBTI Exozodi Exoplanet Common Hunt (LEECH) exoplanet imaging survey. By comparing our new photometry and literature photometry with a grid of custom model atmospheres, we were able to fit GJ 504 b's unusual spectral energy distribution for the first time. We find that GJ 504 b is well fit by models with the following parameters: T{sub eff} = 544 ± 10 K, g < 600 m s{sup −2}, [M/H] = 0.60 ± 0.12, cloud opacity parameter of f{sub sed} = 2–5, R = 0.96 ± 0.07 R{sub Jup}, and log(L) = −6.13 ± 0.03 L{sub ⊙}, implying a hot start mass of 3–30 M{sub jup} for a conservative age range of 0.1–6.5 Gyr. Of particular interest, our model fits suggest that GJ 504 b has a superstellar metallicity. Since planet formation can create objects with nonstellar metallicities, while binary star formation cannot, this result suggests that GJ 504 b formed like a planet, not like a binary companion.

79 ASTRONOMY AND ASTROPHYSICS↗

Determining the Covering Factor of Compton-Thick Active Galactic Nuclei with NuSTAR

The covering factor of Compton-thick (CT) obscuring material associated with the torus in active galactic nuclei (AGNs) is at present best understood through the fraction of sources exhibiting CT absorption along the line of sight (N(sub H) greater than 1.5 x 10(exp 24) cm(exp −2)) in the X-ray band, which reveals the average covering factor. Determining this CT fraction is difficult, however, due to the extreme obscuration. With its spectral coverage at hard X-rays (greater than 10 keV), Nuclear Spectroscopic Telescope Array (NuSTAR) is sensitive to the AGNs covering factor since Compton scattering of X-rays off optically thick material dominates at these energies. We present a spectral analysis of 10 AGNs observed with NuSTAR where the obscuring medium is optically thick to Compton scattering, so-called CT AGNs. We use the torus models of Brightman and Nandra that predict the X-ray spectrum from reprocessing in a torus and include the torus opening angle as a free parameter and aim to determine the covering factor of the CT gas in these sources individually. Across the sample we find mild to heavy CT columns, with N(sub H) measured from 10(exp 24) to 10(exp 26) cm(exp −2), and a wide range of covering factors, where individual measurements range from 0.2 to 0.9. We find that the covering factor, f(sub c), is a strongly decreasing function of the intrinsic 2-10 keV luminosity, L(sub X), where f(sub c) = (−0.41 +/- 0.13)log(sub 10)(L(sub X)/erg s(exp −1))+18.31 +/- 5.33, across more than two orders of magnitude in L(sub X) (10(exp 41.5) - 10(exp 44) erg s(exp −1)). The covering factors measured here agree well with the obscured fraction as a function of LX as determined by studies of local AGNs with L(sub X) greater than 10(exp 42.5) erg s(exp −1).

NGC 4945↗

Aerial Object Trajectory Classification by Training on Flight Controller Data and Testing on RADAR Generated Tracks

Onboard collision avoidance is needed to enable safe, autonomous flight operations for NASA projects such as Advanced Air Mobility (AAM), as well as many commercial applications. Real-time aerial object classification will improve onboard collision avoidance algorithm decision making and may reduce unnecessary activation of avoidance systems. This work trains an aircraft trajectory classifier using trajectories from flight controller logs and tests the classifier using RADAR collected trajectories during air to air experiments and ground to air experiments. In contrast to RADAR data, these flight controller logs are relatively abundant, which makes the possibility of substituting flight data for RADAR data an attractive, cost-effective option. The SVM model developed in this work achieved a 79.7% classification accuracy on the first second of radar trajectories of GA, multirotor sUAS, and fixed wing sUAS. Findings from this work indicate that it is feasible to classify sensor collected trajectories using a classifier trained on flight controller data.

Henry Holbrook↗

DataSet: Aerial Object Trajectory Classification by Training on Flight Controller Data and Testing on RADAR Generated

Onboard collision avoidance is needed to enable safe, autonomous flight operations for NASA projects such as Advanced Air Mobility (AAM), as well as many commercial applications. Real-time aerial object classification will improve onboard collision avoidance algorithm decision making and may reduce unnecessary activation of avoidance systems. This work trains an aircraft trajectory classifier using trajectories from flight controller logs and tests the classifier using RADAR collected trajectories during air to air experiments and ground to air experiments. In contrast to RADAR data, these flight controller logs are relatively abundant, which makes the possibility of substituting flight data for RADAR data an attractive, cost-effective option. The SVM model developed in this work achieved a 79.7% classification accuracy on the first second of radar trajectories of GA, multirotor sUAS, and fixed wing sUAS. Findings from this e that it is feasible to classify sensor collected trajectories using a classifier trained flight controller data.

Chester V Dolph↗

3-D Inversion of MT Data From the Raft River Geothermal Field - Preliminary Results

Geothermal systems are, in many cases, characterized by geoelectric structures with discernible anomalous zones, related to the presence of fluids and conductive alteration minerals. The MT method has been successfully used since the 1970’s to image subsurface electrical resistivity, from which in turn can be delineated structural controls and system characteristics such as the clay cap and fluid distributions. Toward this purpose, a 3-D magnetotelluric (MT) survey of 105 stations was carried out at the Raft River Geothermal area in southern Idaho, to further characterize the field generally, fault distributions, and paths of or barriers to fluid flow. This work was done in support of developing the EGS potential of the field, as part of a Department of Energy-funded project. An electrical resistivity model of the area was constructed from the MT data using a 3-D inversion program on a multicore workstation. The model is interpreted using available lithological logs and geochemical data. Discernible in the resistivity structure are separate low-resistivity zones, attributed to increased fluids and clay alteration, within the basement from which the geothermal field produces, and within the overlying sediments, proximal to the wells. Here, the inferred compartmentalization of the field is similar in nature to that inferred from fluid geochemistry analysis. A much deeper conductor with possible lower crustal sources is seen also which appears to correlate with a similar feature in the regional Earthscope MT project.

15 GEOTHERMAL ENERGY↗

Seismic Monitoring at the Farnsworth CO2-EOR Field Using Time-Lapse Elastic-Waveform Inversion of 3D-3C VSP Data

During the Development Phase of the U.S. Southwest Regional Partnership on Carbon Sequestration, supercritical CO2 was continuously injected into the deep oil-bearing Morrow B formation of the Farnsworth Unit in Texas for Enhanced Oil Recovery (EOR). The project injected approximately 94 kilotons of CO2 to study geologic carbon storage during CO2-EOR. A three-dimensional (3D) surface seismic dataset was acquired in 2013 to characterize the subsurface structures of the Farnsworth site. Following this data acquisition, the baseline and three time-lapse three-dimensional three-component (3D-3C) vertical seismic profiling (VSP) data were acquired at a narrower surface area surrounding the CO2 injection and oil/gas production wells between 2014 and 2017 for monitoring CO2 injection and migration. With these VSP datasets, we inverted for subsurface velocity models to quantitatively monitor the CO2 plume within the Morrow B formation. We first built 1D initial P-wave (Vp) and S-wave (Vs) velocity models by upscaling the sonic logs. We improved the deep region of the Vp and Vs models by incorporating the deep part of a migration velocity model derived from the 3D surface seismic data. We improved the shallow region of 3D Vp and Vs models using 3D traveltime tomography of first arrivals of VSP downgoing waves. We further improved the 3D baseline velocity models using elastic-waveform inversion (EWI) of the 3D baseline VSP upgoing data. Our advanced EWI method employs alternative tomographic and conventional gradients and total-variation-based regularization to ensure the high-fidelity updates of the 3D baseline Vp and Vs models. We then sequentially applied our 3D EWI method to the three time-lapse datasets to invert for spatiotemporal changes of Vp and Vs in the reservoir. Our inversion results reveal the volumetric changes of the time-lapse Vp and Vs models and show the evolution of the CO2 plume from the CO2 injection well to the oil/gas production wells.

42 ENGINEERING↗

Synthesis of Ti Oxides at Reducing Conditions: Implications for Beamline Standards and Cosmochemistry

These initial experiments demonstrate the great potential for synthesizing customized compounds for use as standards, or in buffering experiments at reducing conditions. We are also investigating Cr and V oxides, as well as compounds containing these elements such as FeV2O4 and FeCr2O4. Oxygen fugacity exerts a major control on mineral major element chemistry and elemental valence of minerals in any plane-tary compositional system [1]. For Earth, Fe is multivalent ranging from nearly Fe0 at low fO2 in the deep mantle to Fe2+ to Fe3+ at high low fO2. For solar nebular and meteoritic materials fO2 ranges from near IW to ~10 log fO2 units below the IW buffer [1]. Phases in CAIs, for example, contain no Fe2+, but may contain Ti4+, Ti3+, or Ti2+, and Cr3+ or Cr2+, and V3+ or V2+ [1,2,3]. De-tailed study of inclusions may reveal important differences in fO2 thus reflecting different environments in the solar nebula [4]. XANES, FEG-SEM, and TEM can reveal such variations in micro and nano samples such as Stardust and cosmic dust particles [5], but successful application to reduced conditions depends upon the availability of well characterized standards. Acquiring appropriate standards for reduced phases that contain Ti3+ or Ti2+, Cr3+ or Cr2+, and V3+ or V2+ can be a challenge. Here we report our preliminary results at synthesizing reduced Ti bearing standards, and focus on the preliminary characterization.

Righter, K.↗

Toward Molecule-Specific Geochemistry of Heavy Ends: Application to the Upstream Oil Industry

Detailed molecular analysis of the composition of petroleum is typically performed on only the light (volatile) fraction, using analyses involving gas chromatography (GC). Heavier (nonvolatile) components such as kerogen, bitumen, and asphaltenes, which are relevant to conventional reservoirs and particularly to unconventional gas shale and tight oil formations, are not amenable to analysis by GC and instead are typically studied by more phenomenological techniques. This report describes a suite of analytical techniques that can provide sufficient average molecular information on the heavy ends (defined as the nonvolatile fraction) to be useful for a variety of industrial applications, expanding the discipline of molecule-specific geochemistry into the non-GC amenable fractions of petroleum materials. Heavy ends are composed of the elements C, H, N, S, and O, and the bonding environments of each can be measured by various solid state spectroscopies: nuclear magnetic resonance (NMR) and infrared (IR) spectroscopies for C, H, and O; X-ray absorption near-edge structure (XANES) spectroscopy for S and N. Additionally, advances in mass spectrometry, including techniques such as laser desorption laser ionization mass spectrometry (L2MS), can be used to measure the molecular weight and dominant molecular architecture of asphaltenes. Moreover, higher-order structures can be measured: samples of kerogen with representative pore geometry can be prepared, and those pore systems are analyzed with techniques such as X-ray diffraction and neutron scattering. Colloidal structures of asphaltenes can be measured with a variety of techniques, which reveal a hierarchical aggregation structure. These analyses provide sufficient structural data to enable structure–property and structure–function relationships to be determined, which can be applied to the characterization of conventional and unconventional resources. In gas shale and tight oil formations, which contain abundant inorganic minerals as well as kerogen, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) is used for simultaneous analysis of mineralogy, kerogen content, and maturity, typically performed at the wellsite. In conventional reservoirs, spatial variations in the asphaltene concentration measured by downhole fluid analysis logging tools are being interpreted with a recently developed equation of state to address upstream issues such as reservoir connectivity, tar mat formation, and fault block migration. Furthermore, as more heavy end analyses are developed, further scientific knowledge and industrial applications of heavy end geochemistry are anticipated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hygroscopicity of organic compounds as a function of carbon chain length, carboxyl, hydroperoxy, and carbonyl functional groups

The albedo and microphysical properties of clouds are controlled in part by the hygroscopicity of particles serving as cloud condensation nuclei (CCN). Hygroscopicity of complex organic mixtures in the atmosphere varies widely and remains challenging to predict. Here we present new measurements characterizing the CCN activity of pure compounds in which carbon chain length and the number of hydroperoxy, carboxyl, and carbonyl functional groups were systematically varied to establish the contributions of these groups to organic aerosol apparent hygroscopicity. Apparent hygroscopicity decreased with carbon chain length and increased with polar functional groups in the order carboxyl > hydroperoxy > carbonyl. Activation diameters at different supersaturations deviated from the -3/2 slope in log-log space predicted by Köhler theory, suggesting that water solubility limits CCN activity of particles composed of weakly functionalized organic compounds. Results are compared to a functional group contribution model that predicts CCN activity of organic compounds. The model performed well for most compounds but under-predicted the CCN activity of hydroperoxy groups. New best-fit hydroperoxy group/water interaction parameters were derived from the available CCN data. Lastly, these results may help improve estimates of the CCN activity of ambient organic aerosols from composition data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RECONCILING THE OBSERVED STAR-FORMING SEQUENCE WITH THE OBSERVED STELLAR MASS FUNCTION

We examine the connection between the observed star-forming sequence (SFR ∝ M {sup α}) and the observed evolution of the stellar mass function in the range 0.2 < z < 2.5. We find that the star-forming sequence cannot have a slope α ≲ 0.9 at all masses and redshifts because this would result in a much higher number density at 10 < log (M/M {sub ☉}) < 11 by z = 1 than is observed. We show that a transition in the slope of the star-forming sequence, such that α = 1 at log (M/M {sub ☉}) < 10.5 and α = 0.7-0.13z (Whitaker et al.) at log (M/M {sub ☉}) > 10.5, greatly improves agreement with the evolution of the stellar mass function. We then derive a star-forming sequence that reproduces the evolution of the mass function by design. This star-forming sequence is also well described by a broken power law, with a shallow slope at high masses and a steep slope at low masses. At z = 2, it is offset by ∼0.3 dex from the observed star-forming sequence, consistent with the mild disagreement between the cosmic star formation rate (SFR) and recent observations of the growth of the stellar mass density. It is unclear whether this problem stems from errors in stellar mass estimates, errors in SFRs, or other effects. We show that a mass-dependent slope is also seen in other self-consistent models of galaxy evolution, including semianalytical, hydrodynamical, and abundance-matching models. As part of the analysis, we demonstrate that neither mergers nor hidden low-mass quiescent galaxies are likely to reconcile the evolution of the mass function and the star-forming sequence. These results are supported by observations from Whitaker et al.

79 ASTRONOMY AND ASTROPHYSICS↗

Major mergers host the most-luminous red quasars at z ∼ 2: A Hubble Space Telescope WFC3/IR study

We used the Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) near-infrared camera to image the host galaxies of a sample of 11 luminous, dust-reddened quasars at z∼2—the peak epoch of black hole growth and star formation in the universe—to test the merger-driven picture for the coevolution of galaxies and their nuclear black holes. The red quasars come from the FIRST+2MASS red quasar survey and a newer, deeper, UKIDSS+FIRST sample. These dust-reddened quasars are the most intrinsically luminous quasars in the universe at all redshifts, and they may represent the dust-clearing transitional phase in the merger-driven black hole growth scenario. Probing the host galaxies in rest-frame visible light, the HST images reveal that 8/10 of these quasars have actively merging hosts, whereas one source is reddened by an intervening lower-redshift galaxy along the line of sight. We study the morphological properties of the quasar hosts using parametric Sérsic fits, as well as nonparametric estimators (Gini coefficient, M{sub 20}, and asymmetry). Their properties are heterogeneous but broadly consistent with the most extreme morphologies of local merging systems such as ultraluminous infrared galaxies. The red quasars have a luminosity range of log(L{sub bol})=47.8−48.3 (erg s{sup −1}), and the merger fraction of their hosts is consistent with merger-driven models of luminous active galactic nuclei activity at z = 2, which supports the picture in which luminous quasars and galaxies coevolve through major mergers that trigger both star formation and black hole growth.

79 ASTRONOMY AND ASTROPHYSICS↗