Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Ultrasonic modulus determination in composite media

A nondestructive test procedure for determining the elastic properties of anisotropic media is presented. The technique is based on transit time measurements for multiple angles of incidence and a numerical solution of the resulting coupled nonlinear equations for modulus determination. Methods for compensating for energy flux deviation from the wave normal and the resulting differences group and phase velocity are devised.

Kline, R. A.↗

Characterization of Aircraft Produced Soot and Contrails Near the Tropopause

Participation in the SUCCESS project primarily involved development and deployment of specific instruments for characterizing jet aircraft exhaust emissions as particulates and their subsequent evolution as contrail particles, either liquid or solid, as cirrus. Observations can be conveniently considered in two categories - close or distant from the aircraft. Thus close to the aircraft the exhaust is mixing through the engine turbulence with a much drier and colder environment and developing water/ ice supersaturation along the trail depending on circumstances (near field), whereas distant from the aircraft (far field) the exhaust has cooled essentially to ambient temperature, the turbulence has decayed and any particle growth or evaporation is controlled by the prevailing ambient conditions. Intermediate between these two regions the main aircraft vortices form (one on each side of the aircraft) which tend to inhibit mixing under some conditions, a region extending from a few aircraft lengths to sometimes a hundred times this distance. Our approach to the problem lay in experience gained in characterizing the smoke from hydrocarbon combustion in terms of its cloud forming properties and its potential influence on the radiation properties of the smoke and subsequent cloud from the viewpoint of reduction (absorbtion and scattering ) of solar radiation flux leading to significant global cooling (Hudson et al 1991; Hallett and Hudson 1991). Engine exhaust contains a much smaller proportion of the fuel carbon than is sometimes present in ordinary combustion (less than 0.01% compared with 10%) and influences condensation in quite different ways, to be characterized by the Cloud Condensation Nucleus, CCN - supersaturation spectrum. The transition to ice is to be related to the dilution of solution droplets to freeze by homogeneous nucleation at temperatures somewhat below -40C (Pueschel et al 1998). The subsequent growth of ice particles depends critically on temperature, supersaturation and to some extent pressure, as is demonstrated in an NSF funded project being carried out in parallel with the work reported here. As will be discussed below, nucleation processes themselves and also exhaust impurities also influence the growth of ice particles and may control some aspects of growth of ice in contrails. Instrumentation was designed to give insight into these questions and to be flown on the NASA DC- 8 as a platform. In addition a modest program was undertaken to investigate the properties of laboratory produced smoke produced under controlled conditions from the viewpoint of forming both CCN and CN. The composition of the smoke could inferred from a thermal characterization technique; larger particles were captured by formvar replicator for detailed analysis; ice particles were captured and evaporated in flight on a new instrument, the cloudscope, to give their mass, density and impurity content.

Hallett, John↗

Scalable High Performance Computing: Direct and Large-Eddy Turbulent Flow Simulations Using Massively Parallel Computers

This final report contains reports of research related to the tasks "Scalable High Performance Computing: Direct and Lark-Eddy Turbulent FLow Simulations Using Massively Parallel Computers" and "Devleop High-Performance Time-Domain Computational Electromagnetics Capability for RCS Prediction, Wave Propagation in Dispersive Media, and Dual-Use Applications. The discussion of Scalable High Performance Computing reports on three objectives: validate, access scalability, and apply two parallel flow solvers for three-dimensional Navier-Stokes flows; develop and validate a high-order parallel solver for Direct Numerical Simulations (DNS) and Large Eddy Simulation (LES) problems; and Investigate and develop a high-order Reynolds averaged Navier-Stokes turbulence model. The discussion of High-Performance Time-Domain Computational Electromagnetics reports on five objectives: enhancement of an electromagnetics code (CHARGE) to be able to effectively model antenna problems; utilize lessons learned in high-order/spectral solution of swirling 3D jets to apply to solving electromagnetics project; transition a high-order fluids code, FDL3DI, to be able to solve Maxwell's Equations using compact-differencing; develop and demonstrate improved radiation absorbing boundary conditions for high-order CEM; and extend high-order CEM solver to address variable material properties. The report also contains a review of work done by the systems engineer.

Morgan, Philip E.↗

Recent Improvements to the LAURA and HARA Codes

This paper describes recent improvements to the LAURA and HARA codes. LAURA is a CFD code for aerothermodynamics, and HARA evaluates the shock-layer radiation that provides the radiative source term for the flowfield energy equations and radiative heating to a surface. The next release of LAURA and HARA includes a variety of new capabilities. These new capabilities include an automated uncertainty quantification workflow for radiative heat transfer, options for specifying surface roughness and turbulent transition location in the algebraic turbulence models, and improved grid and solution interpolation techniques. Additionally, the computational efficiency of both LAURA and HARA have been improved. Optimization of the MPI communication routines in LAURA are shown to improve the parallel efficiency of the primary flow when running with multiple processes per block, and recent optimization of HARA leverage graphics processing unit (GPU) acceleration in the radiation calculations. Using GPU acceleration of HARA is shown to decrease the cost of the radiation line-of-sight calculation by approximately one order of magnitude for a 10.5 km/s Earth entry simulation.

LAURA HARA CFD 5.6↗

The CLIC BDS Towards the Conceptual Design Report

The CLIC Conceptual Design Report (CDR) must be ready by 2010. This paper aims at addressing all the critical points of the CLIC Beam Delivery Systems (BDS) to be later implemented in the CDR. This includes risk evaluation and possible solutions to a number of selected points. The smooth and practical transition between the 500 GeV CLIC and the design energy of 3 TeV is also studied.

43 PARTICLE ACCELERATORS↗

Exploring new frontiers in statistical physics with a new, parallel Wang-Landau framework

Combining traditional Wang Landau sampling for multiple replica systems with an exchange of densities of states between replicas we describe a general framework for simulations on massively parallel Petaflop supercomputers. The advantages and general applicability of the method for simulations of complex systems are demonstrated for the classical 2D Potts spin model featuring a strong first-order transition and the self-assembly of lipid bilayers in amphiphilic solutions in a continuous model.

Vogel, Thomas↗

Design and Simulation of a Matching System into the Helical Cooling Channel

Muon colliders could provide the most sensitive measurement of the Higgs mass and return the US back to the Energy Frontier. Central to the capabilities of muon colliders are the cooling channels that provide the extraordinary reduction in emittance required for the precise Higgs mass measurement and increased luminosity for enhanced discovery potential of an Energy Frontier Machine. The Helical Cooling Channel (HCC) is able to achieve such emittance reduction and matching sections within the HCC have been successfully designed in the past with lossless transmission and no emittance growth. However, matching into the HCC from a straight solenoid poses a challenge, since a large emittance beam must cross transition. We elucidate on the challenge and present evaluations of two solutions, along with concepts to integrate the operations of a Charge Separator and match into the HCC.

43 PARTICLE ACCELERATORS↗

Two inorganic-organic hybrid materials based on polyoxometalate anions and methylene blue: Preparations, crystal structures and properties

Two novel inorganic-organic hybrid materials based on an organic dye cation methylene blue (MB) and Lindqvist-type POM polyanions, [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}Mo{sub 6}O{sub 19} 2DMF (1) and [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}W{sub 6}O{sub 19} 2DMF (2) were synthesized under ambient conditions and characterized by CV, IR spectroscopy, solid diffuse reflectance spectrum, UV-vis spectra in DMF solution, luminescent spectrum and single crystal X-ray diffraction. Crystallographic data reveal that compounds 1 and 2 are isostructural and both crystallize in the triclinic space group P1-bar . Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations and near distance interactions among organic dye cations, Lindqvist-type POM polyanions and DMF molecules. The solid diffuse reflectance spectra and UV-vis spectra in DMF solution appear new absorption bands ascribed to the charge-transfer transition between the cationic MB donor and the POM acceptors. Studies of the photoluminescent properties show that the formation of 1 and 2 lead to the fluorescence quenching of starting materials. -- Graphical abstract: Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations. Display Omitted

36 MATERIALS SCIENCE↗

Direct Observation of Room-Temperature Polar Ordering in Colloidal GeTe Nanocrystals

Ferroelectrics and other materials that exhibit spontaneous polar ordering have demonstrated immense promise for applications ranging from non-volatile memories to microelectromechanical systems. However, experimental evidence of polar ordering and effective synthetic strategies for accessing these materials are lacking for low-dimensional nanomaterials. Here, we demonstrate the synthesis of size-controlled nanocrystals of the polar material germanium telluride (GeTe) using colloidal chemistry and provide the first direct evidence of room-temperature polar ordering in nanocrystals less than 5 nm in size using aberration-corrected transmission electron microscopy. Synchrotron x-ray diffraction and Raman studies demonstrate a sizeable polar distortion and a reversible size-dependent polar phase transition in these nanocrystals. The stability of polar ordering in solution-processible nanomaterials suggests an economical avenue to Tbit/in2-density non-volatile memory devices and other applications.

36 MATERIALS SCIENCE↗

On the P2-Na x Co 1– y (Mn 2/3 Ni 1/3 ) y O 2 Cathode Materials for Sodium-Ion Batteries: Synthesis, Electrochemical Performance, and Redox Processes Occurring during the Electrochemical Cycling

P2-type NaMO 2 sodiated layered oxides with mixed transition metals are receiving considerable attention for use as cathodes in sodium-ion batteries. A study on solid solution (1 – y)P2-Na x CoO 2 –( y )P2-Na x Mn 2/3 Ni 1/3 O 2 ( y = 0, 1/3, 1/2, 2/3, 1) reveals that changing the composition of the transition metals affects the resulting structure and the stability of pure P2 phases at various temperatures of calcination. For 0 ≤ y ≤ 1.0, the P2-Na x Co (1– y ) Mn 2 y /3 Ni y /3 O 2 solid-solution compounds deliver good electrochemical performance when cycled between 2.0 and 4.2 V versus Na + /Na with improved capacity stability in long-term cycling, especially for electrode materials with lower Co content ( y = 1/2 and 2/3), despite lower discharge capacities being observed. The (1/2)P2-Na x CoO 2 –(1/2)P2-Na x Mn 2/3 Ni 1/3 O 2 composition delivers a discharge capacity of 101.04 mAh g –1 with a capacity loss of only 3% after 100 cycles and a Coulombic efficiency exceeding 99.2%. Cycling this material to a higher cutoff voltage of 4.5 V versus Na + /Na increases the specific discharge capacity to ≈140 mAh g –1 due to the appearance of a well-defined high-voltage plateau, but after only 20 cycles, capacity retention declines to 88% and Coulombic efficiency drops to around 97%. In situ X-ray absorption near-edge structure measurements conducted on composition Na x Co 1/2 Mn 1/3 Ni 1/6 O 2 ( y = 1/2) in the two potential windows studied help elucidate the operating potential of each transition metal redox couple. As a result, it also reveals that at the high-voltage plateau, all of the transition metals are stable, raising the suspicion of possible contribution of oxygen ions in the high-voltage plateau.

25 ENERGY STORAGE↗

Crystalline phase transitions and water-soluble complexes of copper(Ⅰ) 2-hydroxyethanethiolate

We report the coordination polymer copper(I) 2-hydroxyethanethiolate, (CuSCH 2 CH 2 OH) n , though insoluble in all common solvents, dissolved readily in basic aqueous solutions of the thiolate anion (HOCH 2 CH 2 S – ) of 2-mercaptoethanol to form a single species: the tetranuclear cluster [Cu 4 (μ-SCH 2 CH 2 OH) 6 ] 2– . From this solution were grown X-ray quality single crystals of copper(I) 2-hydroxyethanethiolate. This compound underwent a hitherto unknown crystal phase transition at ca. 6 °C, from point group P2 1 2 1 2 1 to Pna2 1 , with noticeable changes in the geometry of the Cu-S layer and in the orientation of the alkylthiolate side chains. When the bulky base tetrabutylammonium hydroxide was employed in the aqueous thiolate solution used to dissolve (CuSCH 2 CH 2 OH) n , the water-soluble polynuclear copper(I) complex bis(tetrabutylammonium) hexakis(μ-2-hydroxyethanethiolato) tetracuprate(I), [(C 4 H 9 ) 4 N] 2 [Cu 4 (μ-SCH 2 CH 2 OH) 6 ], could be isolated as X-ray quality crystals. Structural characterization of this complex revealed a tetrahedral arrangement of copper(I) centers with thiolates bridging the edges of the tetrahedra. On standing, this complex degraded to a larger polynuclear Cu(I) sulfide cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence of short chains in liquid sulfur

High energy x-ray pair distribution function measurements show the average coordination number of the first shell in liquid sulfur is 1.86 ± 0.04 across the λ-transition, not precisely 2.0 as widely accepted. This indicates that upon melting, liquid sulfur does not comprise solely of S 8 rings but also possesses a significant number of short chains. Intensities of the pre-peak and first diffraction peak of the x-ray structure factor and third peak height of the pair distribution function all show deviations at the λ-transition temperature T λ , associated with the break-up of S 8 rings and the start of oligomer polymerization. A significant number of non-bonded or loosely bonded “interstitial atoms,” with an average coordination number of 0.20 ± 0.005, are also observed in the so-called “forbidden zone” between the first and second shells upon melting. The number of interstitial atoms is found to decrease to a minimum at the λ-transition, but the majority persist into the high temperature polymerized liquid. Furthermore, the existence of short chains and nearby interstitial atoms represent the two main factors required to initiate the S 8 -ring to chain transition, as proposed by recent molecular dynamics simulations.

Chemical bonding↗

Algorithms for Performance, Dependability, and Performability Evaluation using Stochastic Activity Networks

Modeling tools and technologies are important for aerospace development. At the University of Illinois, we have worked on advancing the state of the art in modeling by Markov reward models in two important areas: reducing the memory necessary to numerically solve systems represented as stochastic activity networks and other stochastic Petri net extensions while still obtaining solutions in a reasonable amount of time, and finding numerically stable and memory-efficient methods to solve for the reward accumulated during a finite mission time. A long standing problem when modeling with high level formalisms such as stochastic activity networks is the so-called state space explosion, where the number of states increases exponentially with size of the high level model. Thus, the corresponding Markov model becomes prohibitively large and solution is constrained by the the size of primary memory. To reduce the memory necessary to numerically solve complex systems, we propose new methods that can tolerate such large state spaces that do not require any special structure in the model (as many other techniques do). First, we develop methods that generate row and columns of the state transition-rate-matrix on-the-fly, eliminating the need to explicitly store the matrix at all. Next, we introduce a new iterative solution method, called modified adaptive Gauss-Seidel, that exhibits locality in its use of data from the state transition-rate-matrix, permitting us to cache portions of the matrix and hence reduce the solution time. Finally, we develop a new memory and computationally efficient technique for Gauss-Seidel based solvers that avoids the need for generating rows of A in order to solve Ax = b. This is a significant performance improvement for on-the-fly methods as well as other recent solution techniques based on Kronecker operators. Taken together, these new results show that one can solve very large models without any special structure.

Deavours, Daniel D.↗

Exchange interactions and the state of iron atoms in Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ}

On the basis of the results of magnetic susceptibility and ESR studies of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions iron atoms in the solid solutions of cubic modification of bismuth niobate were found to exist as Fe(III) monomers and exchange bound Fe(III)-O-Fe(III) dimers with antiferro- and ferromagnetic type of superexchange. The exchange parameters and the distribution of monomers and dimers in the solid solutions were calculated as a function of paramagnetic atom content. - Graphical abstract: The study of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions showed that the introduction of iron atoms into the structure of Bi{sub 3}NbO{sub 7} stabilizes the cubic structure of bismuth niobate making the phase transition tetragonal ↔ cubic structure irreversible. In the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions we observe the formation of dimers with antiferro- and ferromagnetic exchange. Such clusters are partially retained even at the infinite dilution of the solid solution, which testifies for their rigidity. A sufficiently high parameter of ferromagnetic exchange in a dimer (+53 cm{sup −1}) seems to result from iron atoms being located in the vicinity of oxygen vacancy. - Highlights: • The reversible transition cubic – tetragonal modifications in Bi{sub 3}NbO{sub 7} becomes irreversible. • Only cubic modification of Bi{sub 3}Nb{sub 1-x}Fe{sub x}O{sub 7-δ} is stable due to clusters of Fe atoms. • These clusters are sufficiently strong and retained even at the infinite dilution. • The calculations of magnetic susceptibility give the distribution of the clusters and single atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unexpected Nonlinear Effects in Superconducting Transition-Edge Sensors

When a normal metal transitions into the superconducting state the DC resistance drops from a finite value to zero over some finite transition width in temperature, current, and magnetic field. Superconducting transition-edge sensors (TESs) operate within this transition region and uses resistive changes to measure deposited thermal energy. This resistive transition is not perfectly smooth and a wide range of TES designs and materials show sub-structure in the resistive transition (as seen in smooth nonmonotonic behavior, jump discontinuities, and hysteresis in the devices current-voltage relation and derivatives of the resistance with respect to temperature, bias current, and magnetic field). TES technology has advanced to the point where for many applications this structure is the limiting factor in performance and optimization consists of finding operating points away from these structures. For example, operating at or near this structure can lead to nonlinearity in the detectors response and gain scale, limit the spectral range of the detector by limiting the usable resistive range, and degrade energy resolution. The origin of much of this substructure is unknown. This presentation investigates a number of possible sources in turn. First we model the TES as a superconducting weak-link and solve for the characteristic differential equations current and voltage time dependence. We find:(1) measured DC biased current-voltage relationship is the time-average of a much higher frequency limit cycle solution.(2) We calculate the fundamental frequency and estimate the power radiated from the TES treating the bias leads as an antennae.(3) The solution for a set of circuit parameters becomes multivalued leading to current transitions between levels.(4)The circuit parameters can change the measure resistance and mask the true critical current. As a consequence the TES resistance surface is not just a function of temperature, current, and magnetic field but is also a function of the circuit elements (such as shunt resistor, SQUID inductance, and capacitor values). In other words, same device measured in different electrical circuits will have a different resistive surface in temperature, current, and magnetic field. Next we consider that at the transition temperature of a superconductor both the magnetic penetration depth and coherence length are divergent. As a consequence these important characteristic length scales are changing with operating point. We present measurements on devices showing commensurate behavior between these characteristic lengths and the length scale of added normal metal structures. Reordering of proximity vortices leads to discontinuities and irreversibility of the current-voltage curves. Last we consider a weak-link TES including both thermal activated resistance effects and the effect of the magnetic penetration depth being a function of temperature and magnetic field. We derive its impact on the resistive transition surface and the important device parameters a and b.

Superconducting Detectors↗

Excitation function of the {sup 93}Nb(n,2n){sup 92}Nb{sup m} reaction from threshold to 24 MeV

The cross sections for formation of {sup 92}Nb{sup m} in the {sup 93}Nb(n,2n){sup 92}Nb{sup m} reaction induced by 9 to 24 MeV neutrons have been theoretically estimated using the TALYS-1.0 computer program. The variations of the cross sections with the level densities and effective imaginary potential were also studied to obtain the best fit of the excitation function. It is observed that the theoretical cross sections match fairly well with the experimental cross sections reported in literature only when both contributions from negative and positive parity levels of {sup 92}Nb are considered. The results of the present study reveal that the approach of the earlier worker to neglect the contributions of the low-lying negative parity energy levels in the formation of {sup 92}Nb{sup m}, in order to match the theoretical cross sections with the experimental cross sections cannot be an obvious solution, particularly when the gamma rays emitted by {sup 92}Nb nuclei in the transition from negative parity levels have been measured.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗