Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transfer functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Linear and nonlinear interpretation of CV-580 lightning data

Numerical models developed for the study of lightning strike data acquired by in-flight aircraft are applied to the data measured on the CV-580. The basic technique used is the three dimensional time domain finite difference solution of Maxwell's equations. Both linear and nonlinear models are used in the analysis. In the linear model, the lightning channel and the aircraft are assumed to form a linear time invariant system. A transfer function technique can then be used to study the response of the aircraft to a given lightning strike current. Conversely, the lightning current can be inferred from the measured response. In the nonlinear model, the conductivity of air in the vicinity of the aircraft is calculated and incorporated into the solution of the Maxwell's equations. The nonlinear model thus simulates corona formation and air breakdown. Results obtained from the models are in reasonable agreement with the measured data. This study provides another validation of the models and increases confidence that the models may be used to predict aircraft response to any general lightning strike.

Ng, Poh H.↗

Control of the induced microgravity environment of the Man Tended Free Flyer (MTFF)

Induced disturbance sources have been identified on board the Man Tended Free Flyer (MTFF). Vibration responses at sensitive payload/spacecraft interfaces have been predicted by the application of an empirically found spacecraft dynamic transfer function. Vibrations from fluid loops (Freon, water) and of reaction wheels are assessed to be the main contributors to the induced microgravity environment. The expected payload acceleration response amplitudes presented here are more than one hundred times higher than the admissible values given by the MTFF system requirement, not considering the structural striction-friction effects which could be avoided by appropriate design. Real responses will be significantly lower because the derivation of excitation and transmission functions are based on worst case assumptions. The results indicate that future activities must be concentrated on equipment design improvement and the implementation of vibration reduction along the disturbance transmission path. The activities must be accompanied by early equipment and assembly development tests and transmissibility measurements with the integrated spacecraft engineering and structural models in order to improve the accuracy of payload response predictions.

Schlund, Juergen↗

Adaptive servo control for umbilical mating

Robotic applications at Kennedy Space Center are unique and in many cases require the fime positioning of heavy loads in dynamic environments. Performing such operations is beyond the capabilities of an off-the-shelf industrial robot. Therefore Robotics Applications Development Laboratory at Kennedy Space Center has put together an integrated system that coordinates state of the art robotic system providing an excellent easy to use testbed for NASA sensor integration experiments. This paper reviews the ways of improving the dynamic response of the robot operating under force feedback with varying dynamic internal perturbations in order to provide continuous stable operations under variable load conditions. The goal is to improve the stability of the system with force feedback using the adaptive control feature of existing system over a wide range of random motions. The effect of load variations on the dynamics and the transfer function (order or values of the parameters) of the system has been investigated, more accurate models of the system have been determined and analyzed.

Zia, Omar↗

The recalibration of the IUE scientific instrument

The IUE instrument was recalibrated because of long time-scale changes in the scientific instrument, a better understanding of the performance of the instrument, improved sets of calibration data, and improved analysis techniques. Calibrations completed or planned include intensity transfer functions (ITF), low-dispersion absolute calibrations, high-dispersion ripple corrections and absolute calibrations, improved geometric mapping of the ITFs to spectral images, studies to improve the signal-to-noise, enhanced absolute calibrations employing corrections for time, temperature, and aperture dependence, and photometric and geometric calibrations for the FES.

Imhoff, Catherine L.↗

IUE's legacy for the future: The final archive and goals for its implementation

Requirements for the IUE archive, and how the signal/noise (S/N) ratio in photometrically corrected images can be enhanced considerably by cross-correlating the fixed pattern in a data image with that in a suitable flat-field image are described. From these cross-correlations it is feasible to derive an accurate geometrical correction to apply to the data image before applying the intensity transfer functions. The standard IUE processing software does not generate a sufficiently accurate geometric correction so that typical spatial errors of 1 to 2 pixels conspire with the large fixed pattern in raw images to produce significant misregistration noise. Tests on flat-field images demonstrate that an explicit geometric correction procedure can avoid most of the misregistration noise and can thereby improve the S/N ratio of IUE data by factors of 1.5 to 2.4.

Linsky, J. L.↗

Identification of space shuttle main engine dynamics

System identification techniques are used to represent the dynamic behavior of the Space Shuttle Main Engine. The transfer function matrices of the linearized models of both the closed loop and the open loop system are obtained by using the recursive maximum likelihood method.

Duyar, Ahmet↗

Measurements of high degree solar oscillation amplitudes

Measurements of high degree solar oscillation velocity amplitudes corrected for the effects of atmospheric seeing are presented. Observations of high degree oscillations, which have very small spatial features, suffer from the effects of atmospheric image blurring and image motion, thereby reducing the amplitudes of their spatial frequency components. In an attempt to correct the velocity amplitudes for these effects, the atmospheric modulation transfer function (MTF) was measured simultaneously by looking at the effects of seeing on the solar limb. The peak velocity power decreases by 2.6 and the energy per mode decreases by a factor 5 as l increases from 200 to 700. The results suggest that the modes are not in energy equipartition with convective turbulent eddies in the top of the convection zone.

Kaufman, James M.↗

Gravity waves in the upper atmosphere of Venus

The transfer function model of Mayr et al. (1984, 1987) for a dissipative multiconstituent atmosphere on earth was modified to describe gravity waves in the thermosphere of Venus in terms of spherical and Fourier harmonics. This model is used to interpret density perturbations in CO2, O, and He which were observed with the orbital neutral mass spectrometer on Pioneer Venus. Results indicate that, in agreement with observations, for localized sources in the lower atmosphere and thermosphere of the same magnitude day and night, the computed wave amplitudes at satellite altitudes are about a factor of 3 to 5 larger during the night than during the day (due to the large night to day increase in the thermospheric temperature); waves excited in the lower atmosphere propagate more obliquely, and geometric attenuation and dissipation are less important than for the thermosphere. Due to wind-induced diffusion, the computed wave amplitudes for CO2, O, and He are of comparable magnitude (with the magnitude of CO2 being the largest).

Mayr, H. G.↗

A digital calibration method for synthetic aperture radar systems

A basic method to calibrate imagery from synthetic aperture radar (SAR) systems is presented. SAR images are calibrated by monitoring all the terms of the radar equation. This procedure includes the use of both external (calibrated reference reflectors) and internal (system-generated calibration signals) sources to monitor the total SAR system transfer function. To illustrate the implementation of the procedure, two calibrated SAR images (X-band, 3.2-cm wavelength) are presented, along with the radar cross-section measurements of specific scenes within each image. The sources of error within the SAR image calibration procedure are identified.

Larson, Richard W.↗

A frequency domain identification scheme for flexible structure control

The authors present a novel method called time-varying transfer function estimation (TTFE) in which time-domain parameters are computed through identification in the frequency domain. The method is particularly well suited for flexible structure control problems. An example of a flexible manipulator system is presented for which a self-tuning control law with frequency shaping is derived and demonstrated.

Tzes, Anthony P.↗

On the design of the dissipative LQG-type controllers

The design of dissipative linear-quadratic-Gaussian-type compensators for positive real plants is considered. It is shown that if the noise covariance matrices (used as weighting matrices) satisfy certain conditions, the compensator has a strictly positive real transfer function matrix. The stability of the resulting closed-loop system is guaranteed regardless of modeling errors as long as the plant remains positive real. In view of this property, the controller is expected to be useful for vibration suppression in large, flexible space structures.

Lozano-Leal, R.↗

Minimal inversion, command matching and disturbance decoupling in multivariable systems

The present treatment of the related problems of minimal inversion and perfect output control in linear multivariable systems uses a simple analytical expression for the inverse of a square multivariate system's transfer-function matrix to construct a minimal-order inverse of the system. Because the poles of the minimal-order inverse are the transmission zeros of the system, necessary and sufficient conditions for the inverse system's stability are simply stated in terms of the zero polynomial of the original system. A necessary and sufficient condition for the existence of the required controllers is that the plant zero polynomial be neither identical to zero nor unstable.

Seraji, H.↗

State-space solutions to standard H2 and H(infinity) control problems

Simple state-space formulas are derived for all controllers solving the standard H(infinity) problem of finding, for a given number gamma greater than 0, all controllers such that the H(infinity) norm of the closed-loop transfer function is (strictly) less than gamma. It is known that a controller exists if and only if the unique stabilizing solutions to two algebraic Riccati equations are positive definite and the spectral radius of their product is less than gamma squared. Under these conditions, a parameterization of all controllers solving the problem is given as a linear fractional transformation (LFT) on a contractive stable free parameter. The state dimension of the coefficient matrix for the LFT, constructed using the two Riccati solutions, equals that of the plant and has a separation structure reminiscent of classical LQG (i.e., H2) theory. A standard H2 solution is developed in parallel.

Doyle, John C.↗

Identification of Space Shuttle Main Engine dynamics

System identification techniques are used to represent the dynamic behavior of the Space Shuttle Main Engine. The transfer function matrices of the linearized models of both the closed loop and the open loop system are obtained by using the recursive maximum likelihood method.

Duyar, Ahmet↗

Multivariable PID Controller For Robotic Manipulator

Gains updated during operation to cope with changes in characteristics and loads. Conceptual multivariable controller for robotic manipulator includes proportional/derivative (PD) controller in inner feedback loop, and proportional/integral/derivative (PID) controller in outer feedback loop. PD controller places poles of transfer function (in Laplace-transform space) of control system for linearized mathematical model of dynamics of robot. PID controller tracks trajectory and decouples input and output.

Seraji, Homayoun↗

Modeling and control system design and analysis tools for flexible structures

Described here are Boeing software tools used for the development of control laws of flexible structures. The Boeing Company has developed a software tool called Modern Control Software Package (MPAC). MPAC provides the environment necessary for linear model development, analysis, and controller design for large models of flexible structures. There are two features of MPAC which are particularly appropriate for use with large models: (1) numerical accuracy and (2) label-driven nature. With the first feature MPAC uses double precision arithmetic for all numerical operations and relies on EISPAC and LINPACK for the numerical foundation. With the second feature, all MPAC model inputs, outputs, and states are referenced by user-defined labels. This feature allows model modification while maintaining the same state, input, and output names. In addition, there is no need for the user to keep track of a model variable's matrix row and colunm locations. There is a wide range of model manipulation, analysis, and design features within the numerically robust and flexible environment provided by MPAC. Models can be built or modified using either state space or transfer function representations. Existing models can be combined via parallel, series, and feedback connections; and loops of a closed-loop model may be broken for analysis.

Anissipour, Amir A.↗

A performance comparison of integration algorithms in simulating flexible structures

Asymptotic formulas for the characteristic root errors as well as transfer function gain and phase errors are presented for a number of traditional and new integration methods. Normalized stability regions in the lambda h plane are compared for the various methods. In particular, it is shown that a modified form of Euler integration with root matching is an especially efficient method for simulating lightly-damped structural modes. The method has been used successfully for structural bending modes in the real-time simulation of missiles. Performance of this algorithm is compared with other special algorithms, including the state-transition method. A predictor-corrector version of the modified Euler algorithm permits it to be extended to the simulation of nonlinear models of the type likely to be obtained when using the discretized structure approach. Performance of the different integration methods is also compared for integration step sizes larger than those for which the asymptotic formulas are valid. It is concluded that many traditional integration methods, such as RD-4, are not competitive in the simulation of lightly damped structures.

Howe, R. M.↗

Flexible aircraft dynamic modeling for dynamic analysis and control synthesis

The linearization and simplification of a nonlinear, literal model for flexible aircraft is highlighted. Areas of model fidelity that are critical if the model is to be used for control system synthesis are developed and several simplification techniques that can deliver the necessary model fidelity are discussed. These techniques include both numerical and analytical approaches. An analytical approach, based on first-order sensitivity theory is shown to lead not only to excellent numerical results, but also to closed-form analytical expressions for key system dynamic properties such as the pole/zero factors of the vehicle transfer-function matrix. The analytical results are expressed in terms of vehicle mass properties, vibrational characteristics, and rigid-body and aeroelastic stability derivatives, thus leading to the underlying causes for critical dynamic characteristics.

Schmidt, David K.↗