SEARCH · Engineering Papers

Results for “Synthetic Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

NASA NTRS1977

A survey of SAR image-formation processing for earth resources applications

Currently there is considerable interest in active microwave sensors for earth resources applications, such as the SEASAT-A radar. However, to obtain spatial resolutions comparable to optical sensors at radar frequencies, sophisticated image formation processing techniques must be applied to the raw data. Processing requirements for non-coherent optical and coherent radar imaging systems are compared. The image formation processing requirements for synthetic aperture radar (SAR) systems are discussed. Both optical and digital techniques are addressed, and examples of hardware and imagery for each processing technique are presented.

Bayma, R. W.↗

NASA NTRS1980

Seasat: - JASIN workshop report. Volume 1: Findings and conclusions

Data acquired from the Joint Air-Sea Interaction (JASIN) Experiment and Seasat data from overpasses that covered the JASIN area were compared and evaluated. The JASIN data were used as a high quality withheld data set. The Seasat data were prepared for each instrument: the Seasat-A Satellite Scatterometer (SASS), the Scanning Multichannel microwave radiometer (SMMR), and the synthetic aperture radar (SAR). The following results demonstrate the performance of Seasat: it was possible to identify mesoscale systems with the SASS as well as fronts; the SMMR provided accurate water vapor content of the atmosphere; the SAR showed evidence of helical rolls in the marine boundary layer; a SASS anomaly could be traced back to thunderstorm activity.

Source record↗

NASA NTRS1985

Simulations of SAR wave spectra using high spectral resolution estimates from the SCR and ROWS instruments

A numerical model for predicting the synthetic aperture radar (SAR) image of a moving ocean surface is described, and results are presented for two SIR-B data sets collected off the coast of Chile. Wave height spectra measured by the NASA radar ocean wave spectrometer (ROWS) and surface contour radar (SCR) were used as inputs to this model, and results are compared with actual SIR-B image spectra from orbits 91 and 106.

Lyzenga, D.↗

NASA NTRS1986

Numerical simulation of synthetic aperture radar image spectra for ocean waves

A numerical model for predicting the synthetic aperture radar (SAR) image of a moving ocean surface is described, and results are presented for two SIR-B data sets collected off the coast of Chile. Wave height spectra measured by the NASA radar ocean wave spectrometer (ROWS) were used as inputs to this model, and results are compared with actual SIR-B image spectra from orbits 91 and 106. Additional parametric variations are presented to illustrate the effects of nonlinearities in the imaging process.

Lyzenga, D. R.↗

NASA NTRS1988

Preliminary results from the NASA/JPL multifrequency, multipolarization synthetic aperture radar

A brief description is given of the three-frequency polarimetric synthetic-aperture radar built and tested at the Jet Propulsion Laboratory. The radar has the capability to simultaneously acquire fully polarimetric data at P-, L-, and C-bands from a DC-8 airborne platform. The radar has an instantaneous data rate of approximately 2.1 Gb/s and has selectable record rates between 80-240 Mb/s. The system has a wide dynamic range featuring 8-b analog-to-digital converters and full digital floating-point processing. The processing is accomplished offline on a minicomputer system assisted by an array processor. Sample images are presented.

Held, Daniel N.↗

NASA NTRS1987

The use of remotely sensed data for the monitoring of forest change in tropical areas

This paper provides an overview of the use of several remote sensing systems for monitoring changes in tropical forests. Particular attention is given to the use of data from the AVHRR sensors on the NOAA series of satellites, the Landsat MSS and TM, and aircraft and spacecraft acquired Synthetic Aperture Radar. Multisensor and multistage approaches to monitoring change in tropical forests is examined. Forest change monitoring through a geographic information system (GIS) approach is addressed. Finally some suggestions are made for research addressing forest change monitoring in tropical areas.

Joyce, Armond T.↗

NASA NTRS1990

Modeling the ultraviolet photospheric spectrum of cool giant stars. I - Arcturus. II - Gamma Crucis

The UV photospheric spectra of cool giants are modeled analytically to facilitate the identification of UV spectral features and aid in the measurement of actual chromospheric flux at different wavelengths. Atomic line data derived experimentally and semiempirically are used with LTE model atmospheres by means of the SYNTHE FORTRAN code to generate the synthetic spectra. Surface flux spectra are determined and fitted to the absorption features of observed IUE high resolution spectra, and the modeled results are compared to the observed spectra of the cool giants Arcturus and the cooler Gamma Crucis. It is shown that the synthetic spectra can be produced for the stars, and chromospheric emission lines are thought to account for significant discrepancies between observed and calculated values. Two new fluorescence mechanisms are identified by modeling the ultraviolet photospheric spectrum of Gamma Crucis.

Carpenter, Kenneth G.↗

NASA NTRS1993

Registration Of SAR Images With Multisensor Images

Semiautomated technique intended primarily to facilitate registration of polarimetric synthetic-aperture-radar (SAR) images with other images of same or partly overlapping terrain while preserving polarization information conveyed by SAR data. Technique generally applicable in sense one or both of images to be registered with each other generated by polarimetric or nonpolarimetric SAR, infrared radiometry, conventional photography, or any other applicable sensing method.

Evans, Diane L.↗

NASA NTRS1992

Monitoring environmental state of Alaskan forests with AIRSAR

During March 1988 and May 1991, the JPL airborne synthetic aperture radar, AIRSAR, collected sets of multi-temporal imagery of the Bonanza Creek Experimental Forest near Fairbanks, Alaska. These data sets consist of series of multi-polarized images collected at P-, L-, and C-bands each over a period of a few days. The AIRSAR campaigns were complemented with extensive ground measurements that included observations of both static canopy characteristics such as forest architecture as well as properties that vary on short term time scales such as canopy dielectric conditions. Observations exist for several stands of deciduous and coniferous species including white spruce (Picea glauca), black spruce (Picea mariana), and balsam poplar (Populus balsamifera). Although the duration of each campaign was fairly short, significant changes in environmental conditions caused notable variations in the physiological state of the canopies. During the 1988 campaign, environmental conditions ranged from unseasonably warm to more normal subfreezing temperatures. This permitted AIRSAR observations of frozen and thawed canopy states. During May 1991, ice jams that occurred along the river caused many stands to flood while the subsequent clearing of the river then allowed the waters to recede, leaving a snow covered ground surface. This allowed observations of several stands during both flooded and nonflooded conditions. Furthermore, the local weather varied from clear sunny days to heavy overcast days with some occurrence of rain. Measurements of leaf water potential indicated that this caused significant variations in canopy water status, allowing SAR observations of water stressed and unstressed trees. Mean backscatter from several stands is examined for the various canopy physiological states. The changes in canopy backscatter that occur as a function of environmental and physiological state are analyzed. Preliminary results of a backscatter signature modeling analysis are presented. The implications of using SAR to monitor canopy phenological state are addressed.

Mcdonald, Kyle C.↗

NASA NTRS1992

The EOS Data and Information System (EOSDIS)

The Earth Observing System (EOS) is the centerpiece of NASA's Mission to Planet Earth initiative. It is a pivotal part of the U.S. Global Change Research Program and hence of the international effort to understand global change and the increasing demands of human activity. EOS consists of a space-based observing system, a Data and Information System (EOSDIS) and a scientific research program. The space component consists of two series of polar-orbiting spacecraft, the first scheduled for launch in 1998, that will collect data for 15 years. EOS is completing its conceptual design phase and is preparing to enter the design phase with the selection and construction of the instruments for the first platform. EOSDIS will allow researchers to quickly and easily access data about the Earth system. Development of EOSDIS has already begun; it will support research and analysis with existing data. Geophysical and biological products will be created from the satellite data to be used to a broad range of the scientific community. NASA has also committed to providing smaller missions - called Earth Probes - dedicated to near-term observations of specific Earth processes. The scientific research program was initiated in 1990, with funding for 28 interdisciplinary teams, to begin development of models that will use EOS data and define the data requirements from the instruments, nine facility instruments and their science teams, 23 instrument investigations and definition studies for a synthetic-aperture radar.

Dozier, J.↗

NASA NTRS2002

Experimental Feedback Control of Flow Induced Cavity Tones

An experimental study of the application of discrete-time, linear quadratic control design methods to the cavity tone problem is described. State space models of the dynamics from a synthetic jet actuator at the leading edge of the cavity to two pressure sensors in the cavity were computed from experimental data. Variations in model order, control order, control bandwidth, and properties of a Kalman state estimator were studied. Feedback control reduced the levels of multiple cavity tones at Mach 0.275, 0.35, and 0.45. Closed loop performance was often limited by excitation of sidebands of cavity tones, and creation of new tones in the spectrum. State space models were useful for explaining some of these limitations, but were not able to account for non-linear dynamics, such as interactions between tones at different frequencies.

Cabell, Randolph H.↗

NASA NTRS1999

Synthetic Scene Generation of the Stennis V and V Target Range for the Calibration of Remote Sensing Systems

The verification and validation (V&V) target range developed at Stennis Space Center is a useful test site for the calibration of remote sensing systems. In this paper, we present a simple algorithm for generating synthetic radiance scenes or digital models of this target range. The radiation propagation for the target in the solar reflective and thermal infrared spectral regions is modeled using the atmospheric radiative transfer code MODTRAN 4. The at-sensor, in-band radiance and spectral radiance for a given sensor at a given altitude is predicted. Software is developed to generate scenes with different spatial and spectral resolutions using the simulated at-sensor radiance values. The radiometric accuracy of the simulation is evaluated by comparing simulated with AVIRIS acquired radiance values. The results show that in general there is a good match between AVIRIS sensor measured and MODTRAN predicted radiance values for the target despite the fact that some anomalies exist. Synthetic scenes provide a cost-effective way for in-flight validation of the spatial and radiometric accuracy of the data. Other applications include mission planning, sensor simulation, and trade-off analysis in sensor design.

Cao, Chang-Yong↗

NASA NTRS1999

Synthetic Scene Generation of Stennis Target Range for the Calibration of Remote Sensing Systems

The validation and verification (V&V) target range developed at Stennis Space Center is a useful tool for the calibration of remote sensing systems. In this paper, we present an algorithm for generating synthetic scenes or digital models of this target range. The atmospheric radiative transfer code Modtran 4 is used in simulating at-sensor radiance for a given sensor. Software is developed to generate the scene with different spatial and spectral resolutions using the at-sensor radiance values. Synthetic scenes provide a cost-effective way for in-flight validation for the spatial and radiometric accuracy of the data. Other applications include mission planning, sensor simulation, and trade-off analysis in sensor design. The radiometric and spatial accuracy of the simulation is evaluated by comparing simulated scenes with AVIRIS acquired values.

Cao, Chang-Yong↗

NASA NTRS2010

Super Resolution Image Enhancement for a Flash Lidar: Back Projection Method

In this paper a new image processing technique for flash LIDAR data is presented as a potential tool to enable safe and precise spacecraft landings in future robotic or crewed lunar and planetary missions. Flash LIDARs can generate, in real-time, range data that can be interpreted as a 3-dimensional (3-D) image and transformed into a corresponding digital elevation map (DEM). The NASA Autonomous Landing and Hazard Avoidance (ALHAT) project is capitalizing on this new technology by developing, testing and analyzing flash LIDARs to detect hazardous terrain features such as craters, rocks, and slopes during the descent phase of spacecraft landings. Using a flash LIDAR for this application looks very promising, however through theoretical and simulation analysis the ALHAT team has determined that a single frame, or mosaic, of flash LIDAR data may not be sufficient to build a landing site DEM with acceptable spatial resolution, precision, size, or for a mosaic, in time, to meet current system requirements. One way to overcome this potential limitation is by enhancing the flash LIDAR output images. We propose a new super-resolution algorithm applicable to flash LIDAR range data that will create a DEM with sufficient accuracy, precision and size to meet current ALHAT requirements. The performance of our super-resolution algorithm is analyzed by processing data generated during a series of simulation runs by a high fidelity model of a flash LIDAR imaging a high resolution synthetic lunar elevation map. The flash LIDAR model is attached to a simulated spacecraft by a gimbal that points the LIDAR to a target landing site. For each simulation run, a sequence of flash LIDAR frames is recorded and processed as the spacecraft descends toward the landing site. Each run has a different trajectory profile with varying LIDAR look angles of the terrain. We process the output LIDAR frames using our SR algorithm and the results show that the achieved level of accuracy and precision of the SR generated landing site DEM is more than adequate for detecting hazardous terrain features and identifying safe areas.

Bulyshev, Alexander↗

NASA NTRS2010

Geologic Studies of Planetary Surfaces Using Radar Polarimetric Imaging

Radar is a useful remote sensing tool for studying planetary geology because it is sensitive to the composition, structure, and roughness of the surface and can penetrate some materials to reveal buried terrain. The Arecibo Observatory radar system transmits a single sense of circular polarization, and both senses of circular polarization are received, which allows for the construction of the Stokes polarization vector. From the Stokes vector, daughter products such as the circular polarization ratio, the degree of linear polarization, and linear polarization angle are obtained. Recent polarimetric imaging using Arecibo has included Venus and the Moon. These observations can be compared to radar data for terrestrial surfaces to better understand surface physical properties and regional geologic evolution. For example, polarimetric radar studies of volcanic settings on Venus, the Moon and Earth display some similarities, but also illustrate a variety of different emplacement and erosion mechanisms. Polarimetric radar data provides important information about surface properties beyond what can be obtained from single-polarization radar. Future observations using polarimetric synthetic aperture radar will provide information on roughness, composition and stratigraphy that will support a broader interpretation of surface evolution.

Carter, Lynn M.↗

NASA NTRS2013

Forest Structure Characterization Using JPL's UAVSAR Multi-Baseline Polarimetric SAR Interferometry and Tomography

This paper concerns forest remote sensing using JPL's multi-baseline polarimetric interferometric UAVSAR data. It presents exemplary results and analyzes the possibilities and limitations of using SAR Tomography and Polarimetric SAR Interferometry (PolInSAR) techniques for the estimation of forest structure. Performance and error indicators for the applicability and reliability of the used multi-baseline (MB) multi-temporal (MT) PolInSAR random volume over ground (RVoG) model are discussed. Experimental results are presented based on JPL's L-band repeat-pass polarimetric interferometric UAVSAR data over temperate and tropical forest biomes in the Harvard Forest, Massachusetts, and in the La Amistad Park, Panama and Costa Rica. The results are partially compared with ground field measurements and with air-borne LVIS lidar data.

UAVSAR (Uninhabited Aerial Vehicle SAR)↗

NASA NTRS2017

The Design of the Reference Orbit for NISAR, the NASA-ISRO Synthetic Aperture Radar Mission

The NISAR mission plans to use a 12-day-repeating sun-synchronous orbit for repeat-pass interferometry at multiple time scales using SAR data. For the interferometry to work the radar measurements must be made from within a critical baseline, which happens if all of the orbits are maintained to be within a fixed tube around a reference orbit. This paper describes the choice of dynamical models used in defining such a reference orbit, the perturbative effects of dynamics not considered in the repeat orbit, and the process of designing the orbit to repeat. We also describe our method for sharing the repeat orbit among multiple mission participants who use different models and software.

Hatch, Sara J.↗

NASA NTRS2017

The Design of the Reference Orbit for NISAR, the NASA-ISRO Synthetic Aperture Radar Mission

Hatch, Sara J.↗