Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Order Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Multi-Objective Optimization of Uranium Target Assembly–3: A Comparison of Genetic and Traditional Methods

Commonly produced as a byproduct of uranium fission, 99 Mo is a key medical isotope that is in high demand in the United States. An international goal is to switch from medical isotope production technologies that require highly enriched uranium to medical isotope production technologies that require only low-enriched uranium. Niowave Inc. is contributing to this goal by developing an accelerator-driven subcritical assembly called the Uranium Target Assembly (UTA). This work compares the performance of Dakota’s Multi-Objective Genetic Algorithm (MOGA) against traditional sensitivity analysis in the neutronic optimization of the UTA-3 system. The design objectives are k-eigenvalue (k eff ) and natural uranium fission power, which are directly correlated with the amount of 99 Mo produced. Dakota:MOGA did not perform as well as human engineering ingenuity in optimization studies with high numbers of input parameters, such as fuel rod type selection and fuel rod placement. However, Dakota:MOGA did outperform traditional sensitivity analysis in optimization studies with fewer than 20 parameters and revealed the degree to which each parameter influences the optimal design space for k eff and natural uranium fission power (to a lesser extent). As the design model became more complex in the final stage of design, the computational resources required to calculate the design objective values in the Monte Carlo N-Particle transport code from selected input parameter combinations limited Dakota:MOGA’s performance, and, unfortunately, human intervention was required to discern the optimal design space. In conclusion, future work will attempt to reduce computational resource constraints by incorporating areduced-order neutronics model into the optimization cycle.

Accelerator-driven systems↗
DOE OSTI2021

Hamiltonian reduction of Vlasov–Maxwell to a dark slow manifold

In this work, we show that non-relativistic scaling of the collisionless Vlasov–Maxwell system implies the existence of a formal invariant slow manifold in the infinite-dimensional Vlasov–Maxwell phase space. Vlasov–Maxwell dynamics restricted to the slow manifold recovers the Vlasov–Poisson and Vlasov–Darwin models as low-order approximations, and provides higher-order corrections to the Vlasov–Darwin model more generally. The slow manifold may be interpreted to all orders in perturbation theory as a collection of formal Vlasov–Maxwell solutions that do not excite light waves, and are therefore ‘dark’. We provide a heuristic lower bound for the time interval over which Vlasov–Maxwell solutions initialized optimally near the slow manifold remain dark. We also show how the dynamics on the slow manifold naturally inherits a Hamiltonian structure from the underlying system. After expressing this structure in a simple form, we use it to identify a manifestly Hamiltonian correction to the Vlasov–Darwin model. The derivation of higher-order terms is reduced to computing the corrections of the system Hamiltonian restricted to the slow manifold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

Digital simulation of the serpentuator using MARSYAS

Serpentuator is a serpentine teleoperator device for intravehicular and extravehicular activities in space. The serpentuator is simulated using simulation software system MARSYAS and using the Component-Connection Simulation model and the Direct Simulation model. A comparison of the results for the two cases shows that under identical conditions, simulation execution time in the Component-Connection model case is reduced by a factor of the order of 100. A visual display of the serpentuator positions is obtained using the AMTRAN system on the Datacraft DC 6024 computer.

Singh, S., P.↗
NASA NTRS1998

Analysis of earth albedo effect on sun sensor measurements based on theoretical model and mission experience

Analysis of flight data from previous missions indicates that anomalous Sun sensor readings could be caused by Earth albedo interference. A previous Sun sensor study presented a detailed mathematical model of this effect. The model can be used to study the effect of both diffusive and specular reflections and to improve Sun angle determination based on perturbed Sun sensor measurements, satellite position, and an approximate knowledge of attitude. The model predicts that diffuse reflected light can cause errors of up to 10 degrees in Coarse Sun Sensor (CSS) measurements and 5 to 10 arc sec in Fine Sun Sensor (FSS) measurements, depending on spacecraft orbit and attitude. The accuracy of these sensors is affected as long as part of the illuminated Earth surface is present in the sensor field of view. Digital Sun Sensors (DSS) respond in a different manner to the Earth albedo interference. Most of the time DSS measurements are not affected, but for brief periods of time the Earth albedo can cause errors which are a multiple of the sensor least significant bit and may exceed one degree. This paper compares model predictions with Tropical Rainfall Measuring Mission (TRMM) CSS measurements in order to validate and refine the model. Methods of reducing and mitigating the impact of Earth albedo are discussed. ne CSS sensor errors are roughly proportional to the Earth albedo coefficient. Photocells that are sensitive only to ultraviolet emissions would reduce the effective Earth albedo by up to a thousand times, virtually eliminating all errors caused by Earth albedo interference.

Brasoveanu, Dan↗
NASA NTRS2014

Preliminary Structural Sensitivity Study of Hypersonic Inflatable Aerodynamic Decelerator Using Probabilistic Methods

Acceptance of new spacecraft structural architectures and concepts requires validated design methods to minimize the expense involved with technology validation via flighttesting. This paper explores the implementation of probabilistic methods in the sensitivity analysis of the structural response of a Hypersonic Inflatable Aerodynamic Decelerator (HIAD). HIAD architectures are attractive for spacecraft deceleration because they are lightweight, store compactly, and utilize the atmosphere to decelerate a spacecraft during re-entry. However, designers are hesitant to include these inflatable approaches for large payloads or spacecraft because of the lack of flight validation. In the example presented here, the structural parameters of an existing HIAD model have been varied to illustrate the design approach utilizing uncertainty-based methods. Surrogate models have been used to reduce computational expense several orders of magnitude. The suitability of the design is based on assessing variation in the resulting cone angle. The acceptable cone angle variation would rely on the aerodynamic requirements.

Lyle, Karen H.↗
NASA NTRS2016

The Lick AGN Monitoring Project 2011: Spectroscopic Campaign and Emission-line Light Curves

In the Spring of 2011 we carried out a 2.5 month reverberation mapping campaign using the 3 m Shane telescope at Lick Observatory, monitoring 15 low-redshift Seyfert 1 galaxies. This paper describes the observations, reductions and measurements, and data products from the spectroscopic campaign. The reduced spectra were fitted with a multicomponent model in order to isolate the contributions of various continuum and emission-line components. We present light curves of broad emission lines and the active galactic nucleus (AGN) continuum, and measurements of the broad Hβ line widths in mean and rms spectra. For the most highly variable AGNs we also measured broad H beta line widths and velocity centroids from the nightly spectra. In four AGNs exhibiting the highest variability amplitudes, we detect anticorrelations between broad H beta width and luminosity, demonstrating that the broad-line region "breathes" on short timescales of days to weeks in response to continuum variations. We also find that broad H beta velocity centroids can undergo substantial changes in response to continuum variations; in NGC 4593, the broad H beta velocity shifted by approximately 250 km s(exp -1) over a 1 month period. This reverberation-induced velocity shift effect is likely to contribute a significant source of confusion noise to binary black hole searches that use multi-epoch quasar spectroscopy to detect binary orbital motion. We also present results from simulations that examine biases that can occur in measurement of broad-line widths from rms spectra due to the contributions of continuum variations and photon-counting noise.

galaxies: Seyfert↗
NASA NTRS1987

A scattering model for perfectly conducting random surfaces. I - Model development. II - Range of validity

The surface current on a perfectly conducting randomly rough surface is estimated by solving iteratively a standard integral equation, and the estimate is then used to compute the far-zone scattered fields and the backscattering coefficients for vertical, horizontal and cross polarizations. The model developed here yields a simple backscattering coefficient expression in terms of the surface parameters. The expression reduces analytically to the Kirchhoff and the first-order small-perturbation model in the high- and low-frequency regions, respectively. The range of validity of the model is determined.

Fung, A. K.↗
NASA NTRS1978

Computerized power supply analysis: State equation generation and terminal models

To aid engineers that design power supply systems two analysis tools that can be used with the state equation analysis package were developed. These tools include integration routines that start with the description of a power supply in state equation form and yield analytical results. The first tool uses a computer program that works with the SUPER SCEPTRE circuit analysis program and prints the state equation for an electrical network. The state equations developed automatically by the computer program are used to develop an algorithm for reducing the number of state variables required to describe an electrical network. In this way a second tool is obtained in which the order of the network is reduced and a simpler terminal model is obtained.

Garrett, S. J.↗
NASA NTRS2009

Thermal Transport Model for Heat Sink Design

A document discusses the development of a finite element model for describing thermal transport through microcalorimeter arrays in order to assist in heat-sinking design. A fabricated multi-absorber transition edge sensor (PoST) was designed in order to reduce device wiring density by a factor of four. The finite element model consists of breaking the microcalorimeter array into separate elements, including the transition edge sensor (TES) and the silicon substrate on which the sensor is deposited. Each element is then broken up into subelements, whose surface area subtends 10 10 microns. The heat capacity per unit temperature, thermal conductance, and thermal diffusivity of each subelement are the model inputs, as are the temperatures of each subelement. Numerical integration using the Finite in Time Centered in Space algorithm of the thermal diffusion equation is then performed in order to obtain a temporal evolution of the subelement temperature. Thermal transport across interfaces is modeled using a thermal boundary resistance obtained using the acoustic mismatch model. The document concludes with a discussion of the PoST fabrication. PoSTs are novel because they enable incident x-ray position sensitivity with good energy resolution and low wiring density.

Chervenak, James A.↗
DOE OSTI2020

Data-driven predictive probability density function control of fiber length stochastic distribution shaping in refining process

Pulp is the most important raw material in paper in paper industries, whose Fiber Length Stochastic Distribution (FLSD) shaping directly determines the energy consumption and paper quality of the subsequent papermaking processes. However, the mean and variance are insufficient to describe the output FLSD shaping, which display non-Gaussian distribution properties. Therefore, the traditional control, method based on the mean and variance of fiber length is difficult to control the FLSD shaping effectively. In this paper, a novel data-driven predictive probability density function (PDF) control method is proposed for output FLSD shaping in refining process. Primarily, in order to improve the approximation accuracy of the PDF employing RBF neural network, the parameters (center value and width) of each RBF basis functions are tuned via utilizing iterative learning control (ILC) law, and the corresponding estimations of weights law can be obtained. Secondly, considering that the conventional linear model of weights vector has drawbacks of low accuracy and weak generalization ability, random vector functional link networks (RVFLNs) based data driven nonlinear modelling method is employed to characterize the prediction model between the input variables and weights vector. Finally, in order to reduce the randomness of the output FLSD, a minimum entropy control method under mean constraint is employed to design the predictive PDF controller for the output FLSD shaping with the help of the established nonlinear stochastic distribution model. Both simulations and experiments are given to illustrate the effectiveness and practicability of the proposed method.

Probability debsity function, Fiber length distrib↗
DOE OSTI2023

Mean field model parameterization to recover coverage-dependent kinetics

Lateral interactions between adsorbates introduce coverage dependence into adsorption energies and activation barriers of surface reactions. Lattice-based kinetic Monte Carlo (kMC) simulations can capture these interactions quantitatively but are laborious to parameterize and solve. Mean field models are more tractable, but protocols to construct and parameterize them are unclear. Here we explore the ability of a coverage-aware mean-field model to map to a lattice-kMC model of a generic two-step reaction network, including quasi-equilibrated adsorption and rate-limiting dissociation steps. We derive expressions for mean-field and coverage-dependent adsorption energies and dissociation barriers and parameterize against lattice-kMC predictions. We show that the parameterized mean-field rates correlate with ground truth lattice-kMC results across a wide range of reaction conditions and identify regions where the mean field fails. The mean field model similarly captures kMC-derived rate-order, Arrhenius and Sabatier plots at a greatly reduced computational cost. Further, the results provide guidance for parameterizing mean-field models, benchmarked against explicit lattice-based approaches for incorporating the influence of coverage effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Turbulence modelling of flow fields in thrust chambers

Following the consensus of a workshop in Turbulence Modelling for Liquid Rocket Thrust Chambers, the current effort was undertaken to study the effects of second-order closure on the predictions of thermochemical flow fields. To reduce the instability and computational intensity of the full second-order Reynolds Stress Model, an Algebraic Stress Model (ASM) coupled with a two-layer near wall treatment was developed. Various test problems, including the compressible boundary layer with adiabatic and cooled walls, recirculating flows, swirling flows, and the entire SSME nozzle flow were studied to assess the performance of the current model. Detailed calculations for the SSME exit wall flow around the nozzle manifold were executed. As to the overall flow predictions, the ASM removes another assumption for appropriate comparison with experimental data to account for the non-isotropic turbulence effects.

Chen, C. P.↗
NASA NTRS1993

Development of an algebraic stress/two-layer model for calculating thrust chamber flow fields

Following the consensus of a workshop in Turbulence Modeling for Liquid Rocket Thrust Chambers, the current effort was undertaken to study the effects of second-order closure on the predictions of thermochemical flow fields. To reduce the instability and computational intensity of the full second-order Reynolds Stress Model, an Algebraic Stress Model (ASM) coupled with a two-layer near wall treatment was developed. Various test problems, including the compressible boundary layer with adiabatic and cooled walls, recirculating flows, swirling flows and the entire SSME nozzle flow were studied to assess the performance of the current model. Detailed calculations for the SSME exit wall flow around the nozzle manifold were executed. As to the overall flow predictions, the ASM removes another assumption for appropriate comparison with experimental data, to account for the non-isotropic turbulence effects.

Chen, C. P.↗
NASA NTRS1972

A study of pilot modeling in multi-controller tasks

A modeling approach, which utilizes a matrix of transfer functions to describe the human pilot in multiple input, multiple output control situations, is studied. The approach used was to extend a well established scalar Wiener-Hopf minimization technique to the matrix case and then study, via a series of experiments, the data requirements when only finite record lengths are available. One of these experiments was a two-controller roll tracking experiment designed to force the pilot to use rudder in order to coordinate and reduce the effects of aileron yaw. One model was computed for the case where the signals used to generate the spectral matrix are error and bank angle while another model was computed for the case where error and yaw angle are the inputs. Several anomalies were observed to be present in the experimental data. These are defined by the descriptive terms roll up, break up, and roll down. Due to these algorithm induced anomalies, the frequency band over which reliable estimates of power spectra can be achieved is considerably less than predicted by the sampling theorem.

Whitbeck, R. F.↗
DOE OSTI2026

A point-particle-based hydride shell-shedding model for ejecta particle transport in reactive environments

A shock wave passing over a rough or perturbed metal surface will induce a limiting case of Richtmyer–Meshkov instability and will cause small particles to eject from the surface and transport into the surrounding medium. These particles are known as ejecta and can be either solid or liquid in nature. Recent experiments have shown that liquid cerium ejecta clouds exhibit unexpected non-monotonic acceleration behaviors as well as temperature plateaus after a brief temperature rise if they are transporting in a chemically reactive, hydrogen-based medium while they act as expected in an inert medium. This work details a point-particle model developed for reactive cerium ejecta transport, which attempts to account for these new physics through the behavior of a developing solid hydride shell, which is believed to form as a product of the reaction. The overall model incorporates the effects of the reaction on the particle properties as well as the effects of potential shedding of the shell into sub-micrometer scale flakes and potential phase change of the hydride if the ejecta particles reach the melt point of the hydride layer. The model is tested by performing simulations of the original motivating experiments and comparing quantities, such as ejected mass, velocimetry, and temperature profiles, against the experimental data. While the model is able to capture many general features of the observed anomalies, some inaccuracies still exist. These point to both missing physics in the model (such as a deuterium adsorption mechanism on the hydride layer) as well as a lack of knowledge of certain material properties (such as the strength of cerium hydride to determine dynamic fracture thicknesses) needed to fully reduce the uncertainties in the model by up to an order of magnitude and perform a true attempt at model validation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

LDRD-DR: Accelerating Nuclear Fuel Qualification through Integrated Multiscale and Multiphysics Models [Slides]

Nuclear fuel qualification implies ensuring that a new fuel can safely operate in a reactor under both normal and accident conditions. Historically, extensive irradiation campaigns probe fuel performance relationships and interconnections in an integral sense, which is very time-consuming and costly. The presentation focus is on introducing advanced modeling and simulation into the qualification process in order to reduce the qualification timeline by targeting fewer integral tests

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1987

Performance improvement of robots using a learning control scheme

Many applications of robots require that the same task be repeated a number of times. In such applications, the errors associated with one cycle are also repeated every cycle of the operation. An off-line learning control scheme is used here to modify the command function which would result in smaller errors in the next operation. The learning scheme is based on a knowledge of the errors and error rates associated with each cycle. Necessary conditions for the iterative scheme to converge to zero errors are derived analytically considering a second order servosystem model. Computer simulations show that the errors are reduced at a faster rate if the error rate is included in the iteration scheme. The results also indicate that the scheme may increase the magnitude of errors if the rate information is not included in the iteration scheme. Modification of the command input using a phase and gain adjustment is also proposed to reduce the errors with one attempt. The scheme is then applied to a computer model of a robot system similar to PUMA 560. Improved performance of the robot is shown by considering various cases of trajectory tracing. The scheme can be successfully used to improve the performance of actual robots within the limitations of the repeatability and noise characteristics of the robot.

Krishna, Ramuhalli↗
NASA NTRS1991

Computational modelling of dump combustors flowfield

A computational model aimed at predicting the flowfield of dump combustors is presented. The turbulent combustion model is based on the conserved scalar approach and on a convenient specification of its probability density function, which reduces the computation of the mean density to a closed form. Turbulence is modeled by means of the k-epsilon model. The averaged conservation equations are solved by a technique based on a staggered grid and on the SIMPLE solver. The computational model is applied to a simple dump combustor to assess the computer time requirements and accuracy. The turbulent combustion model is shown to reduce the computer time by an order of magnitude when compared to evaluating the mean density by numerical quadrature.

Lentini, D.↗