Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFRACTORIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Visual Inspection of Defense Waste Processing Facility Melter 2 Interior after End of Service

Defense Waste Processing Facility (DWPF) Melter 2 reached its end of service life after nearly14 years. A visual inspection of the interior of the melter was performed using a remotely operated camera to provide insight into melter performance and potential failure mechanisms. The condition of the interior of the melter was generally good considering its relatively long service life. The plenum refractory appeared to be in good condition. Spalling and wear of the glass contact refractory was evident at the melt line. There appeared to be some degree of degradation and deposition of material at the dome heater penetrations. Deformation, or sagging of the dome heaters was visible. Only the top surfaces of the upper electrodes were visible due to the full inventory of glass remaining after melter shutdown. The electrodes exhibited small cracks as well as minor deformation (creep or slumping). The lower electrode failure mechanism could not be determined since it was not visible.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Corrosion Behavior Characterization of Tantalum in Flowing LBE [Slides]

Tantalum is a refractory metal, it has low coefficient thermal expansion and high creep resistance. Its BCC structure makes Ta less prone to radiation damage. It is 2nd most ductile among refractories. Its oxide (Ta 2 O 5 ) layer is thin and stable at high temperatures and low oxygen concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Enhanced Bottom Anode Monitoring in DC Electric Arc Furnaces Using Fiber-Optic Sensors

A pin style bottom anode employs conductive steel rods that serve as the pathway for the high electrical power through rammed refractory at the bottom of a DC Electric Arc Furnace (EAF). Anode wear during operation is important to monitor, as anode replacement is expensive and impacts EAF productivity. Liquid steel penetration into the un-sintered refractory layer can result from rapid electrical power ramp-up, dips in furnace temperature, or operating the anode for too long between EAF campaigns. In extreme cases, the liquid steel may penetrate the bottom of the furnace when anode wear progresses too close to the bottom shell, which is extremely dangerous and must be avoided. The current state of the art for monitoring bottom anode wear employs thermocouples imbedded in the anode pins at points in the anode. However, this approach is not sensitive enough to detect localized damage to the anode, especially when cracking occurs. Here, the present work utilizes fiber optic sensors to monitor the health of the anode, by creating a real-time spatially distributed temperature map of the anode. Unlike the traditional thermocouples, these sensors can be mounted at significantly greater depths, provide distributed temperature measurements, and can withstand temperatures of up to 900°C. Additionally, they are able to perform temperature measurements with a spatial resolution of 1.3 mm at a 5 Hz acquisition rate, providing unprecedented high-density real time monitoring of anode health and increasing the efficiency, and safety of EAF operation.

Bottom Anode↗
DOE OSTI2016

Galactic cosmic ray origins and ob associations: evidence from supertiger observations of elements {sub 26}Fe through {sub 40}Zr

We report abundances of elements from {sub 26}Fe to {sub 40}Zr in the cosmic radiation measured by the SuperTIGER (Trans-Iron Galactic Element Recorder) instrument during 55 days of exposure on a long-duration balloon flight over Antarctica. These observations resolve elemental abundances in this charge range with single-element resolution and good statistics. These results support a model of cosmic ray origin in which the source material consists of a mixture of 19{sub −6}{sup +11}% material from massive stars and ∼81% normal interstellar medium material with solar system abundances. The results also show a preferential acceleration of refractory elements (found in interstellar dust grains) by a factor of ∼4 over volatile elements (found in interstellar gas) ordered by atomic mass (A). Both the refractory and volatile elements show a mass-dependent enhancement with similar slopes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Effects of Chemistry on Vertical Dust Motion in Early Protoplanetary Disks

We propose the possibility of a new phenomenon affecting the settling of dust grains at the terrestrial region in early protoplanetary disks. Sinking dust grains evaporate in a hot inner region during the early stage of disk evolution, and the effects of condensation and evaporation on vertical dust settling can be significant. A 1D dust settling model considering both physical and chemical aspects is presented in this paper. Modeling results show that dust grains evaporate as they descend into the hotter interior and form a condensation front, above which dust-composing major elements, Mg, Si, and Fe, accumulate, creating a large temperature gradient. Repeated evaporation at the front inhibits grain growth, and small grain sizes elevate the opacity away from the midplane. Self-consistent calculations, including radiative heat transfer and condensation theory, suggest that the mid-disk temperature could be high enough for silicates to remain evaporated longer than previous estimates. The formation of a condensation front leads to contrasting settling behaviors between highly refractory elements, such as Al and Ca, and moderately refractory elements, such as Mg, Si, and Fe, suggesting that elemental abundance in planetesimals may not be a simple function of volatility.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1965

Development of high temperature nickel-base alloys for jet engine turbine bucket applications

A program has been initiated to develop a material with superior properties at elevated temperatures for utilization in turbine blade applications. A nickel-base superalloy can provide the necessary high temperature strength by using the maximum capability of the three available strengthening mechanisms - intermetallic gamma prime precipitation (Ni3Al), solid solution strengthening with refractory and precious metals, and stable carbide formations through the addition of strong carbide forming elements. A stress rupture test at 2000 deg F and 15,000 psi was formulated to approximate the desired properties. By adding varying amounts of refractory metals (Mo, W and Ta) it was possible to statistically analyze the effects of each in a basic superalloy composition containing fixed amounts of Co, Cr, C, B, Sr, and Ni at three separate levels of AL and Ta. Metallographic analysis correlated with the mechanical properties of the alloys; those with few strengthening phases were weak and ductile and those with excessive amounts of intermetallic phases present in undesirable morphologies were brittle.

SUPERALLOY↗
NASA NTRSDate not supplied

On the New Optical Constants Database (OCdb) and its Importance for the Interpretation of Observational Data

The Optical Constants database(ocdb.smce.nasa.gov) came online in February 2023 and provides complex refractive indices of laboratory-generated organic refractory materials and ices relevant to (exo) planetary and astrophysical environments.The goal of the OCdb is to centralize published optical constants data to facilitate both their access by the scientific community and their use to analyze observational data returned by space missions and ground-based observatories. Computational tools are also under development to facilitate scientific use of the available OCdb optical constants data sets. Investigators generating laboratory optical constants are therefore encouraged to contribute their data to OCdb in order to increase the availability of their data and to enhance the scientific effectiveness of the database. Optical constants are critical input parameters in models (e.g.,radiative transfer, atmospheric, and reflectance spectral models)that are used to simulate the absorption, reflection, and scattering of light due to solid materials present in planetary and astrophysical environments (planets, their satellites, exoplanets, asteroids, comets, protoplanetary disks, etc.), and are key to the compositional interpretation of observations. We will first present the infrastructure of the OCdb and show how to use and contribute to it. We will introduce the two large NASA projects, namely, the Laboratory Astrophysics Directed Work Package and the NASA Center for Optical Constants, that have been instrumental in (i) developing the OCdb, (ii) generating planetary-and astrophysics-relevant ices and organic refractory materials from gas and ice irradiation in the laboratory, and (iii) determining their optical constants for inclusion in OCdb. We will also present two studies that are making use of these optical constants to interpret observations of Titan’s atmosphere and Pluto’s surface. These studies show the importance of measuring optical constants of laboratory-generated materials, and their impact on the models used to analyze and interpret astronomical observations. These studies also demonstrate the essential importance of such a database and the need for optical constants of a broad range of materials and wavelengths to enable the scientific community and to maximize the scientific return from space missions (e.g., Cassini, New Horizons, SOFIA, JWST).

The Optical Constants database↗
NASA NTRS2026

List of Commercial and Advanced Developmental Niobium-Based Alloys of the Space Age

This report compiles a list of commercial and developmental niobium-based alloys developed during the Space Age (late 1950s through mid-1970s) for extreme-temperature applications, including rocket engine thrust chambers, hypersonic re-entry thermal protection systems, and space fission reactor loops. Niobium (Nb) was widely pursued because it provided the lowest density (~8.6 g/cc) among the primary refractory metals, a high melting temperature (~2470°C), exceptional low-temperature ductility, good formability, and compatibility with liquid alkali metals. An evaluation of physical metallurgy mechanisms, focusing on solid-solution strengthening via heavy refractory solutes (W, Mo, Ta), dual-purpose reactive solutes (Hf, Zr, Ti), and dispersion strengthening using carbides, nitrides, and oxides is presented. Additionally, the report compares Western and Soviet Union metallurgical approaches, explaining how supply chain factors and manufacturing infrastructure influenced element selection, interstitial chemistry, and alloy identification/naming conventions. Cataloging these historical alloy chemical compositions serves as a foundational reference for modern alloy additive manufacturing, thermodynamic CALPHAD modeling, and machine-learning discovery pipelines for next-generation extreme-environment niobium-based alloys.

Physical Metallurgy↗
DOE OSTI2017

FIREX-Related Biomass Burning Research Using ARM Single-Particle Soot Photometer Field Campaign Report

The scientific focus of this study was to investigate and quantify the mass loadings, chemical compositions, and optical properties of biomass burning particulate emissions generated in the laboratory from Western U.S. fuels using a similar instrument suite to the one deployed on the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility Gulfstream-1 (G-1) aircraft during the 2013 Biomass Burning Observation Project (BBOP) field study (Kleinman and Sedlacek, 2013). We deployed the single-particle soot photometer (SP2) to make measurements of biomass burning refractory black carbon (rBC) mass loadings and size distributions to correlate with non-refractory particulate matter (NR-PM; i.e., HR-AMS) and rBC (SP-AMS) measurements as a function of photo-oxidation processes in an environmental chamber. With these measurements, we will address the following scientific questions: 1. What are the emission indices (g/kg fuel) of rBC from various wildland fuels from the Pacific Northwest (i.e., relevant to BBOP analysis) as a function of combustion conditions and simulated atmospheric processing in an environmental chamber? 2. What are the optical properties (e.g., mass-specific absorption cross-section [MAC], single-scattering albedo [SSA], and absorption Angstrom exponent [AAE)] of rBC emitted from various wildland fuels and how are they impacted by atmospheric processing? 3. How does the mixing state of rBC in biomass-burning plumes relate to the optical properties? 4. How does the emitted rBC affect radiative forcing?

09 BIOMASS FUELS↗
DOE OSTI2017

Black Carbon Aerosol Deposition Study (BCADS) Field Campaign Report

Black carbon (BC) absorbs incident solar radiation, perturbs temperature gradients in the atmosphere, and indirectly impacts cloud formation and optical properties (Koch and Del Genio 2010). Deposition of BC to snow and ice surfaces alters albedo and enhances snow melt (Hansen and Nazarenko 2004; Flanner et al., 2007). The impact of BC on regional and global climates through these processes depends on its atmospheric concentration, and thus on the relative rates of emission and loss. Combustion of fossil fuels and biofuel, biomass burning, and wildfires are major sources of BC (Bond et al., 2004). Significant sinks include wet and dry deposition. Wet deposition occurs through scavenging by cloud droplets, ice crystals, and precipitation, while dry deposition refers to the direct removal of particles in the atmosphere to planetary surfaces (e.g., plant, soil, ocean, ice surfaces). Bond et al. (2013) and references therein have focused on the source, aging, and optical properties of BC, while deposition components of the BC lifecycle remain poorly constrained. This is predominantly due to the lack of observations of both total aerosol and BC deposition. Removal rates of refractory and non-refractory sub-micron aerosol by wet and dry deposition are one of the most uncertain aspects of modelling cloud condensation nuclei (CCN; Lee et al., [2013]). BC is an ideal tracer for particle deposition because it is non-volatile and effectively chemically inert, though it can become mixed with other species in the atmosphere. Unlike other aerosol species, BC remains ‘intact’ in water and has no confounding gas-phase contribution to precipitation measurements, and can thus be used to examine the relative importance of wet and dry deposition. Thus, measurements of BC deposition are not only essential for constraining BC sinks and atmospheric lifetime, but also useful for investigating aerosol deposition more broadly.

Southern Great Plains, black carbon, aerosols, sin↗
DOE OSTI2017

Development and Testing of Robotic Inspection Tools for the High-Level Waste Double Shell Tanks at Hanford - 17292

Florida International University (FIU) has been developing inspection tools that are capable of accessing the tank floors of double shell tanks through air supply lines and air refractory channels. This effort has led to the development of a pneumatic pipe crawler and a miniature rover. The miniature rover is a remote controlled vehicle with four wheels directly driven by independent micro DC motors.. The rover will have to navigate through channels as small as 3.81 cm by 3.81 cm, and includes turns with angles up to 90 deg.. To avoid debris, the device travels upside down, magnetically attached to the bottom of the primary tank. The pneumatic pipe crawler is a snake type robot with a modular design. The design is an evolution of previous peristaltic crawlers developed at FIU, and uses pneumatic actuators to emulate the contractions of the peristaltic movements. The inspection path consists of approximately 30 m of pipe (7.62 and 10.16 cm in diameter), reducers and several elbows. In this paper, engineering scale testing of the both systems is presented. Slight modifications have also been made to the designs, based on the testing, and are also explained. The engineering scale testing of the crawler includes approximately 30 m of piping that has the same lengths, dimensions and fittings as the air supply line of AY-102. The primary difference is that that actual line has a number of sections that are vertical. Testing of the miniature rover has included a test-bed manufactured with brick pavers, providing more realistic coefficients of friction between the tether and the channel. Efforts to reduce the load induced when the tether is in contact with a corner in the refractory channel will also be provided. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Hanford Under-tank Inspection with Ultrasonic Volumetric Non-destructive Examination Technology - 18470

The U.S. Department of Energy (DOE) and the Hanford Site Tank Operations Contractor Washington River Protection Solutions, LLC (WRPS) are sponsoring a non-destructive evaluation (NDE) technology development program to identify and mature volumetric (non-visual) NDE technology that will enable the examination of Hanford double-shell tank (DST) bottoms. NDE technology for Hanford under-tank examination will be made possible through technology maturation that includes adaptation of NDE sensor technology to overcome access challenges presented by tank risers and refractory pad air-slots, followed by integration with robotic delivery systems, and ultimately qualification and deployment of the inspection systems. The stages of technology maturation and the testing and evaluation required to support the process are organized under three program phases: Phase I - NDE Capability Testing: Identify and down-select NDE technologies based on flaw detection and characterization abilities only; Phase 2 - NDE Delivery System Testing: Mature promising NDE technologies to adapt transducer hardware and robotic delivery system to address access challenges; Phase 3 - Full-scale Demonstration of Integrated NDE System: Demonstrate adapted NDE technologies in a cold test platform to challenge flaw detection and navigation abilities. Phase I of the program, which was initiated and completed in FY2017, focused on completing the following five key activities: 1. Identifying a broad cross section of potentially applicable NDE volumetric inspection technologies for under-tank examination. 2. Down-selecting the broad set of NDE technologies to a set of strong candidates based on initial flaw detection performance and potential to be adapted/matured to overcome primary tank access challenges posed by access risers and/or refractory pad air-slots. 3. Evaluating the flaw detection performance of the candidate sensors through testing. 4. Using the test results to baseline sensor performance against the flaw detection requirements established for high-level waste tanks. 5. Assessing the trade-offs and vulnerabilities of the candidate sensors that would negatively impact sensor performance reliability or complicate tank inspection operations. The completion of the first three key activities satisfied the first two Phase I test objectives, which were to complete Technology Screening and Sensor Effectiveness Testing. Completion of the fourth key activity satisfied the final test objective of Phase I, which was to determine the extent to which the sensors can satisfy high-level waste tank flaw detection requirements. Sensor flaw detection performance testing yielded several suitable sensor technology options, although each has specific risks or challenges that would need to be accepted or overcome. Thus, the fifth key activity was performed to evaluate sensor risks and challenges for consideration with flaw detection performance. The Phase I evaluation outcomes will be used to support the Phase I programmatic objective, which is to identify one or more NDE sensor technologies for adaptation and maturation for the DST environment. Selection of one or more sensors will mark the culmination of Phase I of the NDE Technology Development Program and allow progression to Phase II.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2014

Micro-Spectroscopic Imaging and Characterization of Individually Identified Ice Nucleating Particles from a Case Field Study

The effect of anthropogenic and biogenic organic particles on atmospheric glaciation processes is poorly understood. We use an optical microscopy (OM) setup to identify the location of ice nuclei (IN) active in immersion freezing and deposition ice nucleation for temperatures of 200-273 K within a large population of particles sampled from an ambient environment. Applying multi-modal micro-spectroscopy methods we characterize the physicochemical properties of individual IN in particle populations collected in central California. Chemical composition and mixing state analysis of particle populations are performed to identify characteristic particle-type classes. All particle-types contained organic material. Particles in these samples take up water at subsaturated conditions, induce immersion freezing at subsaturated and saturated conditions above 226 K, and act as deposition IN below 226 K. The identified IN belong to the most common particle-type classes observed in the field samples: organic coated sea salt, Na-rich, and secondary and refractory carbonaceous particles. Based on these observations, we suggest that the IN are not always particles with unique chemical composition and exceptional ice nucleation propensity; rather, they are common particles in the ambient particle population. Thus, particle composition and morphology alone are insufficient to assess their potential to act as IN. The results suggest that particle-type abundance is also a crucial factor in determining the ice nucleation efficiency of specific IN types. These findings emphasize that ubiquitous organic particles can induce ice nucleation under atmospherically relevant conditions and that they may play an important role in atmospheric glaciation processes.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2026

Modelling the Sensitivity of Yukon River Biogeochemical Dynamics to Environmental and Chemical Drivers: Implications for Dissolved Organic Carbon

Riverine dissolved organic carbon (DOC) is a critical biogeochemical component that transmits information from Arctic soils to the Arctic Ocean, significantly influencing carbon dynamics in this unique ecosystem. As DOC travels downstream, it undergoes transformations that alter its composition and fate. The Yukon River serves as an effective testbed for modelling these dynamics, offering sufficient scale to capture key biogeochemical processes while having a simpler hydrology than other major Arctic rivers, as well as long-term DOC observational data for model validation. To investigate DOC transformations during transit in the Yukon River, we adapted our Arctic Riverine Organic Macromolecular Model by applying regional-specific parameterisations. Our model simulates the transport and transformation of 15 organic macromolecules, including CDOM (coloured dissolved organic matter), proteins, polysaccharides, lipids, lignin phenols, and humic substances. Initial DOC concentrations were derived from observed soil organic carbon stocks in the surrounding watershed, while chemical transformations and hydrological dynamics were modelled along the river's course. Sensitivity and uncertainty analyses were conducted using a Monte Carlo approach under two experimental setups. Results revealed that variability in DOC and CDOM concentrations at the river mouth were predominantly driven by initial DOC concentration (~70% of variability explained) and dilution at confluence points (~10%). The refractory fraction of DOC explained 21%–88% of the variability in 14 macromolecular concentrations and ranked in the top five sensitive parameters for all outputs when a uniform parameter distribution was assumed. However, when a more likely variability was applied to this parameter, its influence on DOC and CDOM decreased. Given that refractory DOC accounts for ~80% of total DOC in Arctic Rivers, this suggests that most DOC resists degradation and retains its chemical composition during transport to the coastal environment. River velocity, which determines residence time, explained 8%–47% of the variability in protein, polysaccharide, lipid, pigments, and lignin phenols at the river mouth. In contrast, chemical turnover times contributed only 1%–5% to output variability. Our findings underscore the need for improved land-specific headwater observations, including seasonal soil moisture and lateral transport dynamics that control the initial tributary-specific DOC inputs. With accelerated permafrost thaw and increasing river discharge, extending our model to other Arctic River systems and seasons will enhance understanding of Arctic riverine carbon fluxes and their contributions to the Arctic Ocean.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Transcatheter arterial infusion for pancreatic cancer: a 10-year National Cancer Center experience in 115 patients and literature review

Purpose: To evaluate the efficacy and safety of transcatheter arterial infusion (TAI) for the treatment of pancreatic cancer in patients ineligible for or refractory to systemic chemotherapy. Materials and methods: The medical records of 115 consecutive patients (mean age, 58.9 years; 71 males) with documented pancreatic cancer ineligible for or refractory to systemic chemotherapy and underwent TAI between February 2007 and January 2017 were reviewed. Results: A total of 224 TAI sessions [mean, 1.9 (range 1–8)] were performed. Technical success rate was 100%. Disease control (i.e., complete response, partial response, and stable disease) was achieved in 72 (62.6%) patients. The median progression-free survival and median overall survival were 56 days and 147 days, respectively. Subgroup analysis revealed that disease control, progression-free survival, and overall survival were significantly improved in patients with an Eastern Cooperative Oncology Group score of ≤ 1 compared with those in patients with an Eastern Cooperative Oncology Group score of 2 (all p < 0.001) and in patients who received > 1 sessions of TAI compared with that in patients who received only 1 session of TAI (p = 0.012, < 0.001, and = 0.002, respectively). A major complication in the form of cerebral infarction occurred in 1 (0.9%) patient 1 day after the procedure. This patient was treated with conservative therapy and recovered without permanent adverse sequelae. No other major complications were observed. Conclusions: TAI may be effective and safe for the treatment of pancreatic cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2012

Radioembolization of Symptomatic, Unresectable Neuroendocrine Hepatic Metastases Using Yttrium-90 Microspheres

Purpose: To evaluate safety, efficacy, and symptom-control of radioembolization in patients with unresectable liver metastases from neuroendocrine tumors (NETLMs). Materials and Methods: Forty-two patients (mean age of 62 years) with treatment-refractory NETLMs underwent radioembolization using yttrium-90 ({sup 90}Y) resin microspheres. Posttreatment tumor response was assessed by cross-sectional imaging using the Response Evaluation Criteria in Solid Tumors (RECIST) and tumor-marker levels. Laboratory and clinical toxicities and clinical symptoms were monitored. Results: The median activity delivered was 1.63 GBq (range 0.63-2.36). Imaging follow-up using RECIST at 3-month follow-up demonstrated partial response, stable disease, and progressive disease in 22.5, 75.0, and 2.5% of patients, respectively. In 97.5% of patients, the liver lesions appeared hypovascular or partially necrotic. The mean follow-up was 16.2 months with 40 patients (95.2%) remaining alive. The median decrease in tumor-marker levels at 3 months was 54.8% (chromogranin A) and 37.3% (serotonin), respectively. There were no acute or delayed toxicities greater than grade 2 according to Common Terminology Criteria for Adverse Events [CTCAE (v3.0)]. No radiation-induced liver disease was noted. Improvement of clinical symptoms 3 months after treatment was observed in 36 of 38 symptomatic patients. Conclusion: Radioembolization with {sup 90}Y-microspheres is a safe and effective treatment option in patients with otherwise treatment-refractory NETLMs. Antitumoral effect is supported by good local tumor control, decreased tumor-marker levels, and improved clinical symptoms. Further investigation is warranted to define the role of radioembolization in the treatment paradigm for NETLMs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2014

Long-term Outcomes of Percutaneous Venoplasty and Gianturco Stent Placement to Treat Obstruction of the Inferior Vena Cava Complicating Liver Transplantation

Purpose: Evaluation of long-term outcomes of venoplasty and Gianturco stents to treat inferior vena cava (IVC) obstruction after liver transplantation. Methods: We retrospectively analyzed records from 33 consecutive adult patients referred with the intent to treat suspected IVC obstruction after liver transplantation. Treatment was performed for occlusion or stenosis with a gradient exceeding 3 mmHg. The primary treatment was venoplasty and, if refractory, Gianturco stent placement. Recurrence prompted repeat venoplasty or stent placement. Results: Of the 33 patients, 25 (aged 46.9 ± 12.2 years) required treatment at a mean of 2.3 years (14 days to 20.3 years) after transplantation. For technically successful cases, primary treatment was venoplasty alone (14) or with stent placement (10). Technical success was 96 % (24 of 25) reflecting failure to cross one occlusion. Clinical success was 88 % (22 of 25) reflecting the technical failure and two that died of unrelated complications within 5 weeks. Cumulative primary patencies were 57.1 % at 6 months (n = 21) and 51.4 % at 1 (n = 10), 3 (n = 7), 5 (n = 6), and 7 (n = 5) years. Cumulative primary assisted patency was 95.2 % at 6 months (n = 21) and at 1 (n = 15), 3 (n = 9), 5 (n = 8), and 7 (n = 8) years. The 17 patients stented for refractory (n = 10) or recurrent (n = 7) stenosis had cumulative primary and primary assisted patencies of 86.0 and 100 %, respectively, from 6 months (n = 14) to 7 years (n = 3). No major complications occurred; one fractured stent was observed after 11.6 years. Conclusion: For IVC obstruction following liver transplantation, excellent long-term outcomes can be achieved by venoplasty and Gianturco stent placement.

62 RADIOLOGY AND NUCLEAR MEDICINE↗