Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Phase transitions, dielectric properties, and vibrational study of stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ}

Graphical abstract: The diffuseness of the phase transition of the Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} enhances with the increasing of erbium content. These compounds were found to undergo phase transitions with increasing temperature. - Highlights: • Substitution Sr/Er in the alkaline earth cage modifies the thermally induced disorder. • Two phase transitions have been observed by DSC. • The dielectric constant increases with erbium substitution. • Dielectric loss increases exponentially with temperature. • The conductivity contribution is mainly due to hopping process. - Abstract: A polycrystalline stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} (x = 0.00, 0.01 and 0.03) were synthesized by sol–gel method and their vibrational properties were investigated using Raman scattering. The substitution of Er in the Sr site, results in a slight change of the position of the Raman spectrum bands. The differential scanning calorimetry (DSC) shows two phase transitions at 532 K and 634 K for Sr{sub 0.99}Er{sub 0.01}SnO{sub 3−δ}. The dielectric behavior of each solid solution (x = 0.01 and x = 0.03) has been studied as a function of temperature and frequency and has confirmed the observed phase transitions. The diffuseness of the phase transitions of these materials enhances with the increasing of erbium content. The dielectric constant showed a strong increase near the phase transitions temperature which value depends with frequency. This phenomenon is usually observed in relaxor materials. The conduction and the dielectric relaxation are attributed to hopping of electrons among Sn{sup 2+} and Sn{sup 4+} ions.

36 MATERIALS SCIENCE↗

Microstructural, optical and ethanol sensing properties of sprayed Li-doped Mn{sub 3}O{sub 4} thin films

Highlights: • Li doped Mn{sub 3}O{sub 4} was grown on glass substrate via the low cost effective spray pyrolysis technique. • Li doping notably tuned the optical band gap of Mn{sub 3}O{sub 4} thin film. • The incorporation of Li ions was found to provide an enhancement of ethanol sensitivity. - Abstract: Lithium-doped manganese oxide thin films have been deposited onto glass substrate by the spray pyrolysis technique. The effect on structural, morphological, optical and ethanol sensitivity properties of the films with different Li concentrations was investigated. The X-ray diffraction (XRD) studies of Li doped Mn{sub 3}O{sub 4} thin films revealed polycrystalline tetragonal structure with lattice parameters: a = 5.73 Å and c = 9.46 Å. The most intense band at 653.26 cm{sup −1} observed in room temperature Raman spectrum of all films corresponds to the tetragonal crystal structure of Mn{sub 3}O{sub 4}. Optical band gap energy was found to vary in the range of 2.23–2.82 eV by an increase in Li-doping concentration up to 15%. The resistance based gas sensing measurements showed a clear response already at a low ethanol concentration of 0.1%. The films showed promising ethanol sensing behavior; especially the sample doped with 3% of lithium exhibits the most excellent sensing performance.

36 MATERIALS SCIENCE↗

Enhanced red emission induced by Tb{sup 3+} doping in europium-based molybdate phosphors

Graphical abstract: The introduction of Tb3+ significantly enhances the red emission of Eu3+ in europium-based molybdate phosphors. The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu3+ ions, whereas the contribution of Tb3+ → Eu3+ energy transfer is little in our case. - Highlights: • The introduction of Tb{sup 3+} significantly enhances the red emission of Eu{sup 3+} in europium-based molybdate phosphors. • At x = 0.02, the red-emitting intensity of LiEuMo{sub 2}O{sub 8} is enhanced by 30% under excitation at ultraviolet light 395 nm. • The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions, whereas the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer is little in our case. - Abstract: A series of Tb{sup 3+}-doped europium-based molybdate red-emitting phosphors (LiEuMo{sub 2}O{sub 8}) were prepared by solid-state reaction method, their crystal structure and luminescence properties have been investigated by X-ray diffraction, micro-Raman spectra, diffuse reflectance spectra, photoluminescence and photoluminescence excitation spectra. Partial substitution of Li{sup +} by Tb{sup 3+} slightly distorts the host lattice, red-shifts the absorption edge of host and improves Eu{sup 3+} red-emitting intensity in LiEuMo{sub 2}O{sub 8} compound. The red-emitting intensity of LiEuMo{sub 2}O{sub 8} powder is enhanced by 30% at the doping level of 0.02 under excitation at 395 nm. In present study, we found that the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer to the enhanced Eu{sup 3+} emission is little since the Tb{sup 3+} ions are not responsive to the near ultraviolet (∼395 nm), the enhanced red emission is tentatively ascribed to the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions. White light-emitting diodes are fabricated by using near ultraviolet light-emitting diode chips (∼395 nm) and the blends of the commercial blue, green and as-prepared red Li{sub 0.98}Tb{sub 0.02}EuMo{sub 2}O{sub 8} phosphor, the resulting white light-emitting diode shows a color-rendering index of 93.5, luminous efficacy of 14 lm/W and chromaticity coordinates of (0.292, 0.329).

36 MATERIALS SCIENCE↗

Electrical properties and conduction mechanism study by OLPT model of NaZnPO4 compound

Highlights: • The crystal structure was resolved using Fullproof program. • The conduction in NaZn PO{sub 4} is insured by OLPT model. • Ac conductivity of NaZn PO{sub 4} compound obeys the Joncher’s law. - Abstract: A polycrystalline sample with NaZnPO{sub 4} stoichiometry was synthesized by the conventional solid-state reaction and then identified and characterized by X-ray powder diffraction, Raman spectroscopy and impedance spectroscopy. The X-ray diffraction pattern revealed that the composite represents a single phase that crystallizes in the monoclinic system with a P2{sub 1}/n space group. All vibration modes of tetrahedral PO{sub 4} appeared in the Raman spectrum. Besides, the electrical conductivity behavior of the title compound was analysed as a function of frequency ranging from 209 Hz to 1 MHz and at a temperature interval ranging from 578 K to 728 K by means of impedance spectroscopy to elucidate the conduction mechanism in this compound. The temperature dependence of frequency exponent ′s′ showed that the conduction in NaZnPO{sub 4} is insured by the overlapping large polaron tunneling (OLPT) model. A correlation between electrical and structural properties was also depicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗

Shear induced weakening of the hydrogen bonding lattice of the energetic material 5,5'-Hydrazinebistetrazole at high-pressure

5,5'-Hydrazinebistetrazole (HBTA) has been studied by in-situ x-ray diffraction and vibrational spectroscopy to pressures near 25 GPa at room temperature. Analysis of the x-ray diffraction pattern of HBTA collected at ambient pressure and temperature revealed a monoclinic structure consistent with that previously reported. Under compression, the x-ray diffraction reveals little evidence of a phase transition over the pressure range studied. Slight anisotropy in response to compression was noted and the β angle decreased moderately, suggesting geometry modifications occur in the hydrogen bonding lattice and between neighboring HBTA molecules as a result of compression along the c axis. Blue shifts in the Infrared active N-H stretching modes were observed, implying a weakening of the hydrogen bond with compression. The weakening of the hydrogen bonding lattice with pressure may lead to an increase in the bending angle of the C-N=N-C bridge between the tetrazole rings and an increased overlap between the π-bonding orbitals. The Raman spectra showed a number of modes associated with H-N=N-H motions of the bridge become more prominent in the spectra under compression. Additionally, the possibility that the increased bend in the angle of the C-N=N-C bridge results from a shearing deformation is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High rate and long cycle life in Li-O 2 batteries with highly efficient catalytic cathode configured with Co 3 O 4 nanoflower

The reaction mechanism of non-aqueous Li-O 2 batteries is based on the deposition and decomposition of Li 2 O 2 . The polarization of Li-O 2 batteries can be rapidly increased by operation under a high rate condition, resulting in the early capacity fade of the cells. Therefore, a well-designed catalyst with a unique structure and excellent catalytic ability is an important way to boost the round-trip performance of Li-O 2 batteries, especially under high current density. In this work, a unique nanoflower structure assembled with Co 3 O 4 nanosheets is synthesized by using 2-methylimidazole (2-MIM) as a structural directing agent. X-ray photoelectron spectroscopy (XPS) and Raman spectra reveal abundant oxygen vacancies on the surface of the Co 3 O 4 nanoflower, which are beneficial for oxygen reduction and evolution reactions and long round-trip lifetime. Density functional theory results demonstrate that Co 3 O 4 catalyst with oxygen vacancies could promote the wetting of Li 2 O 2 on substrate and formation of a Li 2 O 2 nanofilm, thereby boosting the discharge capacity of Li-O 2 batteries. On account of the synergistic effect of abundant oxygen vacancies, the unique structure, and excellent oxygen evolution reaction, Co 3 O 4 nanoflower-based cells could deliver ultralong lifetime of 276 and 248 cycles with a discharge capacity of 1000 mAh g(-1) under charge/discharge current densities of 0.5 A g -1 and 1 A g -1 , respectively. Finally, this study has shed light on a new strategy for catalyst preparation for long lifetime Li-O 2 batteries.

25 ENERGY STORAGE↗

Enhanced electrical properties of pulsed laser-deposited CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films via processing control

Polycrystalline CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films were prepared on soda-lime glass substrates using pulsed laser deposition (PLD) with various process parameters such as laser energy, repetition rate and substrate temperature. It was confirmed that there existed a limited laser energy, i.e. less than 300 mJ, to get phase pure CIGS thin films at room temperature. Particularly, even at room temperature, distinct crystalline CIGS phase was observed in the films. Crystallinity of the films improved with increasing substrate temperature as evidenced by the decrease of FWHM from 0.65 degto 0.54 deg. Slightly Cu-rich surface with Cu{sub 2-x}Se phase was confirmed to exist by Raman spectra, depending on substrate temperature. Improved electrical properties, i.e., carrier concentration of {proportional_to}10{sup 18} cm{sup -3} and resistivity of 10{sup -1}{omega} cm at higher substrate temperature for the optimal CIGS films are assumed to be induced by the potential contributions from highly crystallized thin films, existence of Cu{sub 2-x}Se phase and diffusion of Na from substrates to films. (author)

14 SOLAR ENERGY↗

Effects of processing temperature on the corrosion and tribocorrosion resistance of perhydropolysilazane-derived coatings on AISI 304 steel

Ensuring a highly corrosion and erosion resistant surface is critical to the reliability and structural integrity of steel canisters for long-term nuclear waste storage in corrosive environments. In this work, perhydropolysilazane (PHPS)-derived coating has been successfully applied to enhance the pitting and tribocorrosion resistance of 304 stainless steels in 0.6 M NaCl solution. Two types of coatings were synthesized on the stainless steel substrate by crosslinking PHPS at room temperature or 600 °C, resulting in different mechanical and corrosion performance. Further, Raman spectra revealed that Si-O bonds were generated in the coating crosslinked at room temperature after corrosion, while absent in that pyrolyzed at 600 °C. In tribocorrosion tests, both coatings were protective to the steel substrate, with the protective effect being more pronounced in the 600 °C pyrolyzed coating. Overall, the PHPS-derived coating synthesized at 600 °C exhibited better protection for steel in wear and corrosion coexisting environments than those synthesized at room temperature.

36 MATERIALS SCIENCE↗

Quantitative Confocal Raman Microscopy Study of Ion-Interaction Retention at Reversed-Phase Chromatographic Interfaces

Ion-interaction chromatography utilizes the addition of amphiphilic (surfactant) molecules to the mobile phase solution in order to bring about the retention and separation of hydrophilic ionic analytes on reversed-phase liquid chromatographic stationary phases. The mechanism by which retention and separation in ion-interaction chromatography is accomplished remains unclear, although two primary mechanisms of this phenomenon have been proposed: pre-adsorption of the hydrophobic counter ions to the hydrophobic stationary phase followed by interaction with the ionic analyte, or ion pairing in solution with subsequent sorption of the paired species to the hydrophobic surface. There is evidence that both mechanisms contribute to ionic retention and separations. In this work, ion interactions at a C18 stationary phase interface are investigated by confocal Raman microscopy of individual stationary-phase particles, which is capable of quantifying surface concentrations of surfactants and model solutes. Raman spectra taken within the interior of the particle indicate that pre-adsorption of the hydrophobic surfactant cetylpyridinium to the stationary phase interface is sensitive to ionic strength and concentration of organic modifier in the mobile phase. Furthermore, it was also determined that the presence of low concentrations of a model, ionic solute, nitrobenzenesulfonate, leads to greater adsorption of cetylpyridinium ion at the hydrophobic interface. As the concentration of nitrobenzenesulfonate is increased, the 1:1 increase in the cetylpyridinium-ion interfacial concentration provides evidence of ion pairs forming at the stationary phase surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of On-Line Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes

Knowledge of real-time solution properties and composition is a necessity for any spent nuclear fuel reprocessing method. Metal-ligand speciation in aqueous solutions derived from the dissolved commercial spent fuel is highly dependent upon the acid concentration/pH, which influences extraction efficiency and the resulting speciation in the organic phase. Spectroscopic process monitoring capabilities, incorporated in a counter current centrifugal contactor bank, provide a pathway for on-line real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for on-line applications, while classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Our research is focused on developing a general method for on-line determination of pH of aqueous solutions through chemometric analysis of Raman spectra. Interpretive quantitative models have been developed and validated under the range of chemical composition and pH using a lactic acid/lactate buffer system. The developed model was applied to spectra obtained on-line during solvent extractions performed in a centrifugal contactor bank. The model predicted the pH within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH on-line in applications such as nuclear fuel reprocessing.

pH, spectroscopic monitoring, on-line monitoring, ↗

Confocal Raman Microscopy Investigation of Self-Assembly of Hybrid Phospholipid Bilayers within Individual Porous Silica Chromatographic Particles

Hybrid-supported phospholipid bilayers are a model structure utilized for measurement of molecular interactions that typically occur at cell membranes. These membrane models are prepared by adsorption of a lipid monolayer onto a stable n -alkyl chain layer that is covalently-bound to a support surface. Hybrid bilayers have been adapted to chromatographic retention measurements of lipophilicity through the assembly of a phospholipid monolayer onto n -alkane-modified silica surfaces in reversed-phase chromatographic particles. Recent Raman microscopy studies of these particles have shown that the acyl chains of the phospholipid interact with the C 18 -alkyl chains immobilized on the silica surface, where both lipid and C 18 alkyl chains become ordered due to chain interdigitation. Confocal Raman microscopy has also been used to investigate the association of small molecules with hybrid-lipid bilayers in C 18 chromatographic silica particles; the partitioning of model solutes compares favorably to that in lipid vesicle membranes with similar changes in acyl-chain structure (disordering) with solute partitioning. The present study seeks information about how these membrane-mimetic bilayers assemble onto the C 18 –derivatized silica surfaces of reversed-phase chromatographic silica particles. Confocal Raman microscopy is capable of interrogating the time-dependent internal composition and structure within individual silica particles. The Raman scattering data can be resolved into component Raman spectra and corresponding composition vectors that describe the time-dependent changes in intensity of the component spectra. This analysis provides insight into how the structures of both the lipid and C 18 alkyl chains of hybrid lipid bilayers evolve during deposition and organization on the internal surfaces of reversed-phase chromatographic silica particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modifying Li + and Anion Diffusivities in Polyacetal Electrolytes: A Pulsed-Field-Gradient NMR Study of Ion Self-Diffusion

Polyacetal electrolytes have been demonstrated as promising alternatives to liquid electrolytes and poly(ethylene oxide) (PEO) for rechargeable lithium-ion batteries; however, the relationship between polymer structure and ion motion is difficult to characterize. Here, we study structure-property trends in ion diffusion with respect to polymer composition for a systematic series of five polyacetals with varying ratios of ethylene oxide (EO) to methylene oxide (MO) units, denoted as P(xEO-yMO), and PEO. We first use 7 Li and 19 F pulsed-field-gradient NMR spectroscopy to measure cation and anion self-diffusion, respectively, in polymer/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt mixtures. At 90 °C, we observe modest changes in Li + diffusivity across all polymer compositions, while anion (TFSI - ) self-diffusion coefficients decrease significantly with increasing MO content. At a given reduced temperature (T - T g ), all polyacetal electrolytes exhibit faster Li + self-diffusion than PEO. Intriguingly, P(EO-MO) and P(EO-2MO) also show slower TFSI - anion self-diffusion than PEO at a given reduced temperature. Molecular dynamics simulations reveal that shorter distances between acetal oxygen atoms (O-CH 2 -O) compared to ether oxygens (O-CH 2 -CH 2 -O) promote more diverse, often asymmetric, Li + coordination environments. Finally, Raman spectra reveal that anion-rich ion clusters in P(EO-MO) and P(EO-2MO) lead to decreased anion diffusivity, which along with increased cation diffusivity, support the viability of polyacetals as high-performance polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removing Fluoride from Double Four-Membered Rings Yielding Defect-Free Zeolites under Mild Conditions Using Ozone

We have investigated ozone treatment of as-made LTA zeolites under mild temperature conditions (175 °C) using experiments and periodic DFT as a method of energy savings and engineering defects such as silanol nests in comparison with conventional calcination at 550 °C. We have studied ozone treatment on LTA samples synthesized with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium (denoted as “BULKY”) as the primary organic structure-directing agent (OSDA) and with various amounts of tetramethylammonium (TMA) as a secondary OSDA. Ozone treatment of LTA-BULKY at 175 °C was found to give defect-free, pristine LTA materials as determined by 29 Si NMR, 13 C NMR, Raman spectra, and DFT to assign the spectra. This represents a significant and unexpected finding: that fluoride ions can be completely removed from double four-membered rings (D4Rs) under such mild conditions. Furthermore, ozone treatment of LTA-BULKY-TMA samples removed BULKY but left behind TMA/F, giving a new and more diverse structural landscape of Si environments in LTA. Ab initio MetaDynamics calculations provide pathways with relatively low barriers, explaining how fluoride ions can be removed from D4Rs, leaving behind defect-free LTA materials under mild conditions.

36 MATERIALS SCIENCE↗

Investigating the Energy Storage Mechanism of SnS 2 -rGO Composite Anode for Advanced Na-Ion Batteries

Tin sulfide–reduced graphene oxide (SnS 2 -rGO) composite material is investigated as an advanced anode material for Na-ion batteries. It can deliver a reversible capacity of 630 mAh g –1 with negligible capacity loss and exhibits superb rate performance. Here, the energy storage mechanism of this SnS 2 -rGO anode and the critical mechanistic role of rGO will be revealed in detail. A synergistic mechanism involving conversion and alloying reactions is proposed based on our synchrotron X-ray diffraction (SXRD) and in situ X-ray absorption spectroscopy (XAS) results. Contrary to what has been proposed in the literature, we determined that Na 2 S 2 forms instead of Na 2 S at the fully discharge state. The as-formed Na 2 S 2 works as a matrix to relieve the strain from the huge volume expansion of the Na–Sn alloy reaction, shown in the high resolution transmission electron microscope (HRTEM). In addition, the Raman spectra results suggest that the rGO not only assists the material to have better electrochemical performance by preventing particle agglomeration of the active material but also coordinates with Na-ions through electrostatic interaction during the first cycle. Here, the unique reaction mechanism in SnS 2 -rGO offers a well-balanced approach for sodium storage to deliver high capacity, long-cycle life, and superior rate capability.

25 ENERGY STORAGE↗

Structural Distortions and Uniaxial Negative Thermal Expansion in the Polar Dion–Jacobson Oxide RbNdTa 2 O 7

We provide deeper insight into the crystal structures, sequential structural phase transitions (I2cm → Cmce → I4/mcm → P4/mmm), thermal expansion, and electronic properties of the n = 2 Dion–Jacobson polar oxide RbNdTa 2 O 7 , through X-ray powder diffraction, neutron powder diffraction, Raman studies, and density functional theory calculations. We observed a uniaxial negative thermal expansion (NTE) across the first-order transition, I2cm → Cmce, where the unit cell contracts along the c-axis, which is driven by a contraction of the NdTa 2 O 6 layer. Here, this NTE occurs within the temperature range of the first-order phase transition and contrasts with the corkscrew mechanism typically observed in Ruddlesden–Popper phases. In RbNdTa 2 O 7 , the I2cm (hybrid improper ferroelectric) → Cmce (antipolar) transition involves crucial changes in the bond lengths of Nd and Ta polyhedra, coupled with polar to antipolar displacement of the Nd ions, leading to a net contraction in the NdTa 2 O 6 layer along the c-axis, while preserving the overall octahedral tilting magnitude. This transition highlights the intricate interplay between the Nd and Ta coordination and the associated TaO 6 distortions. Temperature-dependent Raman spectra analysis further confirms the first-order structural transition and associated NTE, providing evidence for increased bond stiffness across this transition. Additionally, using neutron powder diffraction, we have determined that the transition I4/mcm → P4/mmm occurs at approximately 1150 K. Finally, we have calculated from DFT + U, the partial density of states, the energy bandgaps, and effective masses of the charge carriers of the polar ground structure.

Chemical structure↗

Charge Mobility Enhancement for Conjugated DPP-Selenophene Polymer by Simply Replacing One Bulky Branching Alkyl Chain with Linear One at Each DPP Unit

Here, we demonstrate a simple, but efficient, approach for improving the semiconducting performances of DPP-based conjugated D-A polymers. This approach involves the replacement of one bulky branching alkyl chain with the linear one at each DPP unit in regular polymer PDPPSe-10 and PDPPSe-12. The UV–vis absorption, Raman spectra, PDS data, and theoretical calculations support that the replacement of bulky branching chains with linear ones can weaken the steric hindrance, and accordingly conjugated backbones become more planar and rigid. GIWAXS data show that the incorporation of linear alkyl chains as in PDPPSe-10 and PDPPSe-12 is beneficial for side-chain interdigitation and interchain dense packing, leading to improvement of interchain packing order and thin film crystallinity by comparing with PDPPSe, which contains branching alkyl chains. On the basis of field-effect transistor (FET) studies, charge mobilities of PDPPSe-10 and PDPPSe-12 are remarkably enhanced. Hole mobilities of PDPPSe-10 and PDPPSe-12 in air are boosted to 8.1 and 9.4 cm 2 V –1 s –1 , which are about 6 and 7 times, respectively, than that of PDPPSe (1.35 cm 2 V –1 s –1 ). Furthermore, both PDPPSe-10 and PDPPSe-12 behave as ambipolar semiconductors under a nitrogen atmosphere with increased hole/electron mobilities up to 6.5/0.48 cm 2 V –1 s –1 and 7.9/0.79 cm 2 V –1 s –1 , respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗