Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Predictive Data analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Status Report on Aeroelasticity in the Vehicle Development for X-57 Maxwell

Risk reduction is the objective of the X-57 Maxwell aeroelasticity team. The X-57, NASA’s experimental electric propulsion aircraft, has a long thin wing with primary propulsion systems located at the wing tips and high lift motors distributed along the span. Many of the classical aeroelastic concerns associated with such a configuration were addressed through early design decisions. The as-designed intermediate flight vehicle configurations show flutter mechanisms associated with flexible models of control surface systems –the stabilator, flaps and ailerons. Improvements to the analytical models, based on ground test data and project decisions about flight operations, show improved prospects of the vehicle being aeroelastically stable throughout the flight envelope. On-going ground testing and further analyses will lend credibility to the flutter predictions and vehicle safety.

Heeg, Jennifer↗
NASA NTRSDate not supplied

Observations of Keyhole Porosity and Comparisons to Analytical Models for Ti-6Al-4V Powder Bed Fusion

Keyhole porosity defects are a common concern in powder bed fusion (PBF) processing. Keyhole porosity prediction models have generally fallen into two categories – high fidelity computational fluid dynamics simulations and low fidelity analytical or empirical models based on keyhole vibration dynamics. The low computational cost of low fidelity models allows them to better approach part-scale predictions. However, studies on low fidelity modeling techniques are limited by the lack of experimental data to assess the validity of the calibration over a wide range of processing conditions. This work extracts and quantifies keyhole porosity across 14 laser velocities, two laser powers, and six+ repetitions for a total of 176 independent trials. The measured porosity data are compared to low fidelity keyhole models to assess their success in predictive porosity occurrence. This work impacts the field by providing independent validation of keyhole porosity models for PBF for use in part-scale defect prediction.

powder bed fusion↗
NASA NTRS1977

Charging characteristics of materials: Comparison of experimental results with simple analytical models

An understanding of the behavior of materials, of dielectrics in particular, under charged particle bombardment is essential to the prediction and prevention of the adverse effects of spacecraft charging. A one-dimensional model for charging of samples in a test facility was used in conjunction with experimental data taken to develop "material charging characteristics" for silvered Teflon. These characteristics were then used in a one-dimensional model for charging in space to examine expected response. Relative charging rates as well as relative charging levels for silvered Teflon and metal are discussed.

Purvis, C. K.↗
DOE OSTI2024

Tandem Predictions for HPC Jobs

At the core of the predictive analytics applied to High Performance Computing (HPC), the most prominent tasks are the prediction of job runtimes and the prediction of job queue times, both of which have the potential for informing HPC users during their every-day decision making. Accurate runtime predictions can help users better choose so-called wallclock times at job submission, decreasing the odds of their jobs waiting in queues longer than necessary. The accurate and timely queue time predictions offered for the available partitions can inform the favorable selection of partitions for running jobs. This potential is well understood as we see in the abundance of research studies that propose solutions for these tasks, including the work published in the last several years. These tasks are seemingly receptive to the Machine Learning (ML) solutions, considering that there is no shortage of training data where HPC centers over time run millions and millions of jobs. However, we study the existing research literature, as well as look for examples in the toolchains supported on the exemplar HPC facilities, and, surprisingly, do not find any practical solutions that are ready to be adopted. We interpret this as a manifestation of the shortage of UX/UI efforts that support HPC analytics and also as a sign that the research has not come to the consensus on solving these tasks. In this study, we aim to shed new light on the long-running task of job queue time prediction by exploring the utility of runtime predictions in improving prediction accuracy and, actually, predicting these two metrics together, in tandem. In other words, we show how runtime predictions become valuable input in the queue time modeling. We challenge the existing approaches to feature engineering for the queue time prediction and describe promising results we obtained for a large dataset of HPC jobs from a supercomputer at the National Renewable Energy Laboratory.

HPC↗
DOE OSTI2025

Tandem Predictions for HPC Jobs: Preprint

At the core of the predictive analytics applied to High Performance Computing (HPC), the most prominent tasks are the prediction of job runtimes and the prediction of job queue times, both of which have the potential for informing HPC users during their every-day decision making. Accurate runtime predictions can help users better choose so-called wallclock times at job submission, decreasing the odds of their jobs waiting in queues longer than necessary. The accurate and timely queue time predictions offered for the available partitions can inform the favorable selection of partitions for running jobs. This potential is well understood as we see in the abundance of research studies that propose solutions for these tasks, including the work published in the last several years. These tasks are seemingly receptive to the Machine Learning (ML) solutions, considering that there is no shortage of training data where HPC centers over time run millions and millions of jobs. However, we study the existing research literature, as well as look for examples in the toolchains supported on the exemplar HPC facilities, and, surprisingly, do not find any practical solutions that are ready to be adopted. We interpret this as a manifestation of the shortage of UX/UI efforts that support HPC analytics and also as a sign that the research has not come to the consensus on solving these tasks. In this study, we aim to shed new light on the long-running task of job queue time prediction by exploring the utility of runtime predictions in improving prediction accuracy and, actually, predicting these two metrics together, in tandem. In other words, we show how runtime predictions become valuable input in the queue time modeling. We challenge the existing approaches to feature engineering for the queue time prediction and describe promising results we obtained for a large dataset of HPC jobs from a supercomputer at the National Renewable Energy Laboratory.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Time-Frequency Analysis of Experimental and Analytical Hub Loads of a Rotor Undergoing a Rotor Speed Change

A two-part analytical study was conducted examining a small-scale, two-bladed rotor undergoing a change in rotor speed. First, a parametric study was conducted to understand how rotor transient response, determined using a time-marching solution, is affected by the choice of rotor wake model, blade elasticity, and inclusion of an elastic support structure model. The second part of the study compared results from an analytical model of the NASA Multirotor Test Bed (MTB) undergoing a rotor speed change to wind tunnel data. Since the analytical and experimental time histories were nonstationary signals, a Stockwell transform was employed to analyze the data in lieu of traditional Fourier transform-based methods. The analysis included extraction of time-varying frequency content of the rotor thrust and hub motion, damping ratios, instantaneous rotor speed, and instantaneous phase difference between thrust and hub motion. Use of a free wake model was found to be necessary to predict higher-harmonic thrust, however, it underpredicted the amplitude of the unsteady loads. Modeling the elasticity of the stiff rotor blades installed on the MTB resulted in minimal impact on the computed vibratory loads compared to a rigid blade model. The current analytical model of the MTB, including an elastic support structure, properly predicted the measured trends in the frequency content of the thrust.

Martin K Sekula↗
NASA NTRS2009

Introduction: Prediction of F-16XL Flight Flow Physics

This special section is the result of fruitful endeavors by an international group of researchers in industry, government laboratories and university-led efforts to improve the technology readiness level of their CFD solvers through comparisons with flight data collected on the F-16XL-1 aircraft at a variety of test conditions. These 1996 flight data were documented and detailed the flight-flow physics of this aircraft through surface tufts and pressures, boundary-layer rakes and skin-friction measurements. The flight project was called the Cranked Wing Aerodynamics Project (CAWAP), due to its leading-edge sweep crank (70 degrees inboard, 50 degrees outboard), and served as a basis for the International comparisons to be made, called CAWAPI. This highly focused effort was one of two vortical flow studies facilitated by the NATO Research and Technology Organization through its Applied Vehicle Panel with a title of Understanding and Modeling Vortical Flows to Improve the Technology Readiness Level for Military Aircraft. It was given a task group number of AVT-113 and had an official start date of Spring 2003. The companion part of this task group dealt with fundamentals of vortical flow from both an experimental and numerical perspective on an analytically describable 65 degree delta-wing model for which much surface pressure data had already been measured at NASA Langley Research Center at a variety of Mach and Reynolds numbers and is called the Vortex Flow Experiment - 2 (VFE-2). These two parts or facets helped one another in understanding the predictions and data that had been or were being collected.

Lamar, John E.↗
NASA NTRS2001

Near-Horizontal, Two-Phase Flow Patterns of Nitrogen and Hydrogen at Low Mass Heat and Flux (on CD-ROM)

One reason for NASA's interest in cryogenic two-phase flow with low mass and heat flux is the need to design spacecraft heat exchangers used for vaporizing cryogenic propellants. The CD-ROM provides digitized movies of particular flow patterns observed in experimental work. The movies have been provided in (QuickTime9Trademark) format, encoded at 320w x 240h pixels, 15 fps, using the Sorenson(Trademark) Video Codec for compression. Experiments were conducted to obtain data on the two-phase (liquid and vapor) flow behavior of cryogenic nitrogen and hydrogen under low mass and heat flux conditions. Tests were performed in normal gravity with a 1.5 degree up flow configuration. View ports in the apparatus permitted visual observation of the two-phase flow patterns. Computer codes to predict flow patterns were developed from theoretical/empirical models reported in the literature. Predictions from the computer codes were compared with experimental flow pattern observations. Results are presented employing the traditional two-dimensional flow pattern map format using the liquid and gas superficial velocities as coordinates. In general, the agreement between the experimental results and the analytical predictive methods is reasonably good. Small regions of the flow pattern maps are identified where the models are deficient as a result of neglecting phase change phenomena. Certain regions of the maps were beyond the range of the experiments and could not be completely validated. Areas that could benefit from further work include modeling of the transition from separated flow, collection of additional data in the bubble and annular flow regimes, and collection of experimental data at other inclination angles, tube diameters and high heat flux.

TWO PHASE FLOW↗
DOE OSTI2022

High accuracy barrier heights, enthalpies, and rate coefficients for chemical reactions

Abstract Quantitative chemical reaction data, including activation energies and reaction rates, are crucial for developing detailed kinetic mechanisms and accurately predicting reaction outcomes. However, such data are often difficult to find, and high-quality datasets are especially rare. Here, we use CCSD(T)-F12a/cc-pVDZ-F12// ω B97X-D3/def2-TZVP to obtain high-quality single point calculations for nearly 22,000 unique stable species and transition states. We report the results from these quantum chemistry calculations and extract the barrier heights and reaction enthalpies to create a kinetics dataset of nearly 12,000 gas-phase reactions. These reactions involve H, C, N, and O, contain up to seven heavy atoms, and have cleaned atom-mapped SMILES. Our higher-accuracy coupled-cluster barrier heights differ significantly (RMSE of ∼5 kcal mol −1 ) relative to those calculated at ω B97X-D3/def2-TZVP. We also report accurate transition state theory rate coefficients $${k}_{\infty }(T)$$ k ∞ ( T ) between 300 K and 2000 K and the corresponding Arrhenius parameters for a subset of rigid reactions. We believe this data will accelerate development of automated and reliable methods for quantitative reaction prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Glass formulation and composition optimization with property models: A review

Abstract Glass is a versatile material with a remarkable history and many practical applications. It plays a critical role in our everyday lives, the advancement of science, and the development of many technologies. The Edisonian type trial‐and‐error method was commonly used for conventional design of glass compositions, which was time‐consuming and costly. With the urgent need to develop new glass compositions for technology applications rapidly, it has become necessary to develop precise property models with predictive powers using large databases and efficient formulation approaches. This paper reviews the design of glass compositions using these analytical and numerical models of composition–structure–property relations of glasses, some based on large databases and machine learning approaches. Aspects of data collection, model fitting, feature extraction, model evaluation, and uncertainty quantification will be covered. Furthermore, advances in the glass optimization framework and available tools are summarized with examples. The outlook and perspective for further glass property model development and formulation approaches are discussed.

Lu, Xiaonan↗
DOE OSTI2025

Experimental and Computational Characterization of a Modified Sioutas Cascade Impactor for Respirable Radioactive Aerosols

Oak Ridge National Laboratory is collecting and characterizing aerosols released when spent nuclear fuel (SNF) rods are fractured in bending. An aerosol collection system was designed and tested to collect respirable sized (<10 μm aerodynamic diameter [AED]) particulates inside a hot cell facility. The setup is a modified version of the commercially available Sioutas cascade impactor, to which additional stages were added to expand the aerosol collection range from 2.5 to ~15 μm AED. To accommodate the additional stages and specific test conditions, the operating flow rate for aerosol collection was reduced, and testing was conducted by using pressure drop measurements, surrogate dust collection, and particle size characterization. The fluid flow distribution within the cascade and its stages was simulated in STAR-CCM+, and the stage-wise pressure drops obtained using the computational fluid dynamics model were then compared to experimental data. Lagrangian particle simulations were also performed, and stage-wise collection statistics were obtained from the simulation for comparison with the experimental data obtained using SNF-surrogate dust particles. The results provide valuable insights into the stage-wise particle collection characteristics of the modified cascade impactor and can also be used to improve the prediction accuracy of the manufacturer-determined analytical correlations.

aerosol modeling↗
NASA NTRS1975

Zero-G experiments in two-phase fluids flow regimes

The two-phase flows studied were liquid and gas mixtures in a straight flow channel of circular cross-section. Boundaries between flow regimes have been defined for normogravity on coordinates of gas quality and total mass velocity; and, when combined with boundary expressions having a Froude number term, an analytical model was derived predicting boundary shifts with changes in gravity level. Experiments with air and water were performed, first in the normogravity environment of a ground laboratory and then in 'zero gravity' aboard a KC-135 aircraft flying parabolic trajectories. Data reduction confirmed regime boundary shifts in the direction predicted, although the magnitude was a little less than predicted. Pressure drop measurements showed significant increases for the low gravity condition.

Heppner, D. B.↗
NASA NTRS1986

Effect of blunt trailing edge on rotor broadband noise

The production of high-frequency broadband noise by turbulent vortex shedding from rotor blades with blunt trailing edges is investigated analytically. The derivation of the governing equations, analogous to that of Kim and George (1982) for boundary-layer/trailing-edge noise, is explained, and numerical results are compared with the experimental data of Hubbard et al. (1981) and Lowson et al. (1972) in graphs. It is shown that vortex-shedding noise is a significant component of blunt-trailing-edge rotor broadband noise and that the analytical method employed gives reasonable predictions. The need for a better empirical expression for the normalized spectrum and for more measurements of surface pressure fluctuations near blunt trailing edges is indicated.

Chou, S.-T.↗
NASA NTRS1989

Free edge effects in laminated composites

The fundamental mechanics of free-edge effects in laminated fiber-reinforced composites is examined, reviewing the results of recent experimental and analytical investigations. The derivation of the governing equations for the basic problem is outlined, including the equilibrium and mismatch conditions and the elasticity formulation, and experimental data on axial displacement and shear strain in angle-ply laminates are summarized. Numerical predictions of free-edge deformation and interlaminar and through-thickness stress distributions are presented for cross-ply, angle-ply, and quasi-isotropic laminates, and the mechanisms of edge damage and failure in angle-ply laminates are briefly characterized. Extensive diagrams, drawings, graphs, and photographs are provided.

Herakovich, C. T.↗
NASA NTRS1989

The University of Arizona program in solid propellants

The University of Arizona program is aimed at introducing scientific rigor to the predictability and quality assurance of composite solid propellants. Two separate approaches are followed: to use the modern analytical techniques to experimentally study carefully controlled propellant batches to discern trends in mixing, casting, and cure; and to examine a vast bank of data, that has fairly detailed information on the ingredients, processing, and rocket firing results. The experimental and analytical work is described briefly. The principle findings were that: (1) pre- (dry) blending of the coarse and fine ammonium perchlorate can significantly improve the uniformity of mixing; (2) the Fourier transformed IR spectra of the uncured and cured polymer have valuable data on the state of the fuel; (3) there are considerable non-uniformities in the propellant slurry composition near the solid surfaces (blades, walls) compared to the bulk slurry; and (4) in situ measurements of slurry viscosity continuously during mixing can give a good indication of the state of the slurry. Several important observations in the study of the data bank are discussed.

Ramohalli, Kumar↗
NASA NTRS1991

Aerodynamic sensitivity analysis methods for the compressible Euler equations

This study presents a mathematical formulation developed for aerodynamic sensitivity coefficients based on a discretized form of the compressible 2D Euler equations. A brief motivating introduction to the aerodynamic sensitivity analysis and the reasons behind an integrated flow/sensitivity analysis for design algorithms are presented. The finite difference approach and the quasi-analytical approach are used to determine the aerodynamic sensitivity coefficients. A new flow prediction concept, which is an outcome of the direct method in the quasi-analytical approach, is developed and illustrated with an example. Surface pressure coefficient distributions of a nozzle-afterbody configuration obtained from the predicted flowfield solution are compared successfully with their corresponding values obtained from a flowfield analysis code and the experimental data.

Baysal, Oktay↗
NASA NTRS1950

The application of the statistical theory of extreme values to gust-load problems

An analysis is presented which indicates that the statistical theory of extreme values is applicable to the problems of predicting the frequency of encountering the larger gust loads and gust velocities for both specific test conditions as well as commercial transport operations. The extreme-value theory provides an analytic form for the distributions of maximum values of gust load and velocity. Methods of fitting the distribution are given along with a method of estimating the reliability of the predictions. The theory of extreme values is applied to available load data from commercial transport operations. The results indicate that the estimates of the frequency of encountering the larger loads are more consistent with the data and more reliable than those obtained in previous analyses. (author)

Press, Harry↗
NASA NTRS2004

Combined Loads Test Fixture for Thermal-Structural Testing Aerospace Vehicle Panel Concepts

A structural test requirement of the National Aero-Space Plane (NASP) program has resulted in the design, fabrication, and implementation of a combined loads test fixture. Principal requirements for the fixture are testing a 4- by 4-ft hat-stiffened panel with combined axial (either tension or compression) and shear load at temperatures ranging from room temperature to 915 F, keeping the test panel stresses caused by the mechanical loads uniform, and thermal stresses caused by non-uniform panel temperatures minimized. The panel represents the side fuselage skin of an experimental aerospace vehicle, and was produced for the NASP program. A comprehensive mechanical loads test program using the new test fixture has been conducted on this panel from room temperature to 500 F. Measured data have been compared with finite-element analyses predictions, verifying that uniform load distributions were achieved by the fixture. The overall correlation of test data with analysis is excellent. The panel stress distributions and temperature distributions are very uniform and fulfill program requirements. This report provides details of an analytical and experimental validation of the combined loads test fixture. Because of its simple design, this unique test fixture can accommodate panels from a variety of aerospace vehicle designs.

Fields, Roger A.↗