Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Policy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

System and method associated with expedient detection and reconstruction of cyber events in a compact scenario representation using provenance tags and customizable policy

A system associated with detecting a cyber-attack and reconstructing events associated with a cyber-attack campaign, is disclosed. The system performs various operations that include receiving an audit data stream associated with cyber events. The system identifies trustworthiness values in a portion of data associated with the cyber events and assigns provenance tags to the portion of the data based on the identified trustworthiness values. An initial visual representation is generated based on the assigned provenance tags to the portion of the data. The initial visual representation is condensed based on a backward traversal of the initial visual representation in identifying a shortest path from a suspect node to an entry point node. A scenario visual representation is generated that specifies nodes most relevant to the cyber events associated with the cyber-attack based on the identified shortest path.A corresponding method and computer-readable medium are also disclosed.

Source record↗
DOE OSTI2012

A Novel Fuel/Reactor Cycle to Implement the 300 Years Nuclear Waste Policy Approach - 12377

A thorium-based fuel cycle system can effectively burn the currently accumulated commercial used nuclear fuel and move to a sustainable equilibrium where the actinide levels in the high level waste are low enough to yield a radiotoxicity after 300 years lower than that of the equivalent uranium ore. The second step of the Westinghouse approach to solving the waste 'problem' has been completed. The thorium fuel cycle has indeed the potential of burning the legacy TRU and achieve the waste objective proposed. Initial evaluations have been started for the third step, development and selection of appropriate reactors. Indications are that the probability of show-stoppers is rather remote. It is, therefore, believed that development of the thorium cycle and associated technologies will provide a permanent solution to the waste management. Westinghouse is open to the widest collaboration to make this a reality. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Addressing Technical and Policy Challenges for Remediation of Metals and Radionuclides within Complex Deep Vadose Zone Environments - 17028

Deep vadose zone contamination is a significant issue in many regions of the world. Although remediation of deep vadose zone contamination is important, direct contact with the contamination does not threaten human health or the environment due to its depth in the vadose zone. Yet, movement of contamination from the deep vadose zone to the groundwater creates the potential for exposure and risk to receptors. Therefore, the challenge of deep vadose zone remediation is to maintain a minimal rate of contaminant transport such that flux from the contaminated vadose zone is limited to protect groundwater resources and down-gradient receptors. We herein review major processes for viable remediation of deep vadose zone metal and radionuclides that form the practical constraints on remedial actions and provide an overview of how these principles are being practiced to address key contaminants at the U.S. Department of Energy Hanford Site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Optimization of Low Level Waste Disposal Policy, Strategies and Techniques - 17201

The mission of low level radioactive waste disposal facilities is to accept and dispose of waste in compliance with all applicable laws, regulations, license requirements, and social expectations. These facilities need to provide a cost effective disposal service to the waste generators, so that the cost savings could be passed down to business, industry, and ultimately, to the general public. To fulfil this mission, waste disposal facilities need to establish and maintain review and optimization mechanisms to respond to changing circumstances that may impact the long-term safe, cost effective operation of their facilities. Maintaining existing disposal resources available as long as possible, managing increased demand for disposal space as a consequence of growing number of nuclear facilities to be decommissioned, and developing capacity for future needs and uncertainties are some of the key challenges that drive optimization of disposal facilities. While the concept of optimization of low level waste disposal facilities is not new, the framework for holistic optimization of waste disposal facilities, enabling them to provide cost effective, sustainable services to the nuclear industry, as well as maintaining optimized safety and radiation protection systems is a notable gap in the current radioactive waste management body of knowledge. A comprehensive optimization framework is required to support the implementation of safe, effective, and sustainable integrated waste management strategies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Intelligent network slicing and policy-based routing engine

One or more aspects of the present disclosure are directed to network optimization solutions provided as software agents (applications) executed on network nodes in a heterogenous multi-vendor environment to provide cross-layer network optimization and ensure availability of network resources to meet associated Quality of Experience (QoE) and Quality of Service (QoS). In one aspect, a network slicing engine is configured to receive at least one request from at least one network endpoint for access to the heterogeneous multi-vendor network for data transmission; receive information on state of operation of a plurality of communication links between the plurality of nodes; determine a set of data transmission routes for the request; assign a network slice for serving the request; determine, from the set of data transmission routes, an end-to-end route for the network slice; and send network traffic associated with the request using the network slice and over the end-to-end route.

Mody, Apurva N.↗
DOE OSTI2014

TRIPOLI-4{sup R} version 9 Shielding for the Shielding Community: Overview, Relevant Benchmarking for Shielding and Licensing Policy - Paper 49

This is a review paper of the Shielding only version of TRIPOLI-4. TRIPOLI-4 and TRIPOLI-4 S: TRIPOLI{sup R} represents a family of radiation transport codes using the Monte Carlo method (1,2). It has been continuously developed at CEA since the mid 60's. TRIPOLI-4{sup R}, being the fourth generation, has been developed starting from the mid 90's in C++. It tracks neutrons from 20 MeV down to 10{sup -5} eV, photons, electrons and positrons from 100 MeV to 1 keV, in 3D arbitrary geometries either in TRIPOLI{sup R} proprietary format or ROOT(4) format. It reads its continuous energy nuclear data from any evaluation in ENDF format, including but not limited to JEFF-3.1.1 and ENDF/BVII.0. It has various simulation modes, fixed-source (with or without fission), criticality, or both of them chained. A variety of tallies are available: averaged flux in a volume (track length and collision estimators), surface flux and current, point flux, reaction rates, deposited energy, dpa, pka, gamma spectroscopy, mesh tallies, tallies for criticality (k{sub eff}, beta eff, kinetic parameters). It provides the user with embedded response functions from IRDF and EAF as well. Several variance reduction techniques (3), including automated ones, make it particularly suitable to deep penetration problems (implicit capture, Russian roulette, exponential biasing with automatic estimation of the importance map). It may run in parallel, on single multi-core machines as well as heterogeneous networks of stations or massively parallel machines. It comes with productivity tools designed to speed-up the elaboration and verification of the input deck as well as the output analysis: 2D interactive display of geometry; 2D display of mesh tallies and collision sites; 3D input deck modeler; compatibility with ROOT tools to post-process TRIPOLI{sup R} outputs. Its V and V test base is made of more than 1000 internationally accepted benchmarks from ICSBEP and SINBAD (REPLICA, ASPIS, NESDIP) and covers all its application domains, including several shielding cases which will be detailed in the talk. TRIPOLI-4{sup R} is the reference Monte Carlo code for CEA, EDF, and also for AREVA for a number of applications. A 'Shielding-only' version has been designed to specifically answer the needs of the shielding community. It is distributed through the NEA Databank with a license for R and D, covering the fusion applications, whose terms are detailed in the paper.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2023

Getting Technical: Introducing Students to Technical Concepts for Nuclear Science and Policy to Create and Encourage Diversity in the Nuclear Field

When discussing diversity, it is important to consider the many of the types of diversity: gender diversity, racial diversity, religious diversity, cultural diversity, and diversity in abilities. The nuclear field has recently seen a surge in the diversity within the entire industry, but there is still room for the industry to grow in those areas. Where does that begin? How does that develop? When is the right time to engage the next generation of nuclear professionals? What topics should be introduced to encourage and foster excitement in the nuclear field? These questions are all certainly important but narrowing in on the topics that should be introduced might prove to be a very effective way to grow excitement in and, then, diversity in the nuclear field. Students at all socioeconomic levels should be introduced to various technical concepts that correspond to the stage and level of education that is appropriate for those students. Oftentimes there may be a speaker at a school for certain ages that will provide an overview of the nuclear industry as a whole, or perhaps even specifics on what that person does, but rarely is the interaction carried on over a long period of time and rarely do presentations for these students introduce technical concepts. Creating new, effective volunteer programs in a wide range of schools in local areas where nuclear sciences are supported would allow professionals in the nuclear field to identify and focus on students whose aptitude might lean them towards future careers in the nuclear field. This paper will focus on potential, effective ways to start these programs, and it will identify a range of technical concepts that might be considered as age-appropriate or that can be molded to fit individual schools and would, in turn, begin to develop a diverse base of students to grow and enter the nuclear field.

Loftin, Bradley↗
DOE OSTI2017

Evaluation of U.S. Building Energy Benchmarking and Transparency Programs: Attributes, Impacts, and Best Practices

In the last decade, a new policy area has emerged to boost energy efficiency in buildings that focuses on the simple action of measuring energy use as compared to buildings of similar type and size, and making that data publicly available. These efforts, referred to as benchmarking and transparency (B&T) policies, seek to unlock new energy efficiency opportunities in the country’s existing buildings by promoting data-driven decision-making and creating stronger market signals. This report focuses on the 24 state and local jurisdictions that (as of December 31, 2016) require owners of privately owned commercial buildings, multifamily buildings, or both to comply with a B&T policy. The report provides a summary of U.S. B&T policy design and implementation characteristics, reports results and impacts for jurisdictions with B&T policies, and discusses opportunities for increasing the efficacy of B&T policies, as well as suggested areas for further research. Among the findings, all but one of the B&T policy evaluation studies reviewed indicate some reduction (from 1.6% to 14%) in energy use, energy costs, or energy intensity over the two- to four-year period of the analyses. More specifically, most of the studies reviewed indicate 3% to 8% reductions in gross energy consumption or energy use intensity over a two- to four-year period of B&T policy implementation. Two additional evaluation studies indicate that there is a causal relationship between B&T policies and energy savings or energy cost savings. These documented impacts should be reviewed with some caution. While consistently showing energy savings benefits associated with B&T policies, these savings estimates should be considered preliminary because of the limited period of analyses and inconsistencies in analysis methods for the various studies. A nationally standardized method for data collection, reporting, and evaluation of B&T policies—developed with an advisory group of state and local jurisdictions, energy efficiency and evaluation experts, building owner and real estate associations, and other stakeholders—could improve the consistency and quality of B&T impact studies, providing policymakers and others with a more complete understanding of the present and future impacts of these policies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

An Evolutionary Algorithm to Personalize Stool-Based Colorectal Cancer Screening

Fecal immunochemical testing (FIT) is an established method for colorectal cancer (CRC) screening. Measured FIT-concentrations are associated with both present and future risk of CRC, and may be used for personalized screening. However, evaluation of personalized screening is computationally challenging. In this study, a broadly applicable algorithm is presented to efficiently optimize personalized screening policies that prescribe screening intervals and FIT-cutoffs, based on age and FIT-history. We present a mathematical framework for personalized screening policies and a bi-objective evolutionary algorithm that identifies policies with minimal costs and maximal health benefits. The algorithm is combined with an established microsimulation model (MISCAN-Colon), to accurately estimate the costs and benefits of generated policies, without restrictive Markov assumptions. The performance of the algorithm is demonstrated in three experiments. In Experiment 1, a relatively small benchmark problem, the optimal policies were known. The algorithm approached the maximum feasible benefits with a relative difference of 0.007%. Experiment 2 optimized both intervals and cutoffs, Experiment 3 optimized cutoffs only. Optimal policies in both experiments are unknown. Compared to policies recently evaluated for the USPSTF, personalized screening increased health benefits up to 14 and 4.3%, for Experiments 2 and 3, respectively, without adding costs. Generated policies have several features concordant with current screening recommendations. The method presented in this paper is flexible and capable of optimizing personalized screening policies evaluated with computationally-intensive but established simulation models. It can be used to inform screening policies for CRC or other diseases. For CRC, more debate is needed on what features a policy needs to exhibit to make it suitable for implementation in practice.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Analysis of the Chinese Market for Building Energy Efficiency

China will account for about half of the new construction globally in the coming decade. Its floorspace doubled from 1996 to 2011, and Chinese rural buildings alone have as much floorspace as all of U.S. residential buildings. Building energy consumption has also grown, increasing by over 40% since 1990. To curb building energy demand, the Chinese government has launched a series of policies and programs. Combined, this growth in buildings and renovations, along with the policies to promote green buildings, are creating a large market for energy efficiency products and services. This report assesses the impact of China’s policies on building energy efficiency and on the market for energy efficiency in the future. The first chapter of this report introduces the trends in China, drawing on both historical analysis, and detailed modeling of the drivers behind changes in floorspace and building energy demand such as economic and population growth, urbanization, policy. The analysis describes the trends by region, building type and energy service. The second chapter discusses China’s policies to promote green buildings. China began developing building energy codes in the 1980s. Over time, the central government has increased the stringency of the code requirements and the extent of enforcement. The codes are mandatory in all new buildings and major renovations in China’s cities, and they have been a driving force behind the expansion of China’s markets for insulation, efficient windows, and other green building materials. China also has several other important policies to encourage efficient buildings, including the Three-Star Rating System (somewhat akin to LEED), financial incentives tied to efficiency, appliance standards, a phasing out of incandescent bulbs and promotion of efficient lighting, and several policies to encourage retrofits in existing buildings. In the third chapter, we take “deep dives” into the trends affecting key building components. This chapter examines insulation in walls and roofs; efficient windows and doors; heating, air conditioning and controls; and lighting. These markets have seen significant growth because of the strength of the construction sector but also the specific policies that require and promote efficient building components. At the same time, as requirements have become more stringent, there has been fierce competition, and quality has at time suffered, which in turn has created additional challenges. Next we examine existing buildings in chapter four. China has many Soviet-style, inefficient buildings built before stringent requirements for efficiency were more widely enforced. As a result, there are several specific market opportunities related to retrofits. These fall into two or three categories. First, China now has a code for retrofitting residential buildings in the north. Local governments have targets of the number of buildings they must retrofit each year, and they help finance the changes. The requirements focus on insulation, windows, and heat distribution. Second, the Chinese government recently decided to increase the scale of its retrofits of government and state-owned buildings. It hopes to achieve large scale changes through energy service contracts, which creates an opportunity for energy service companies. Third, there is also a small but growing trend to apply energy service contracts to large commercial and residential buildings. This report assesses the impacts of China’s policies on building energy efficiency. By examining the existing literature and interviewing stakeholders from the public, academic, and private sectors, the report seeks to offer an in-depth insights of the opportunities and barriers for major market segments related to building energy efficiency. The report also discusses trends in building energy use, policies promoting building energy efficiency, and energy performance contracting for public building retrofits.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2013

Biofuels and Food Security. A report by the High Level Panel of Experts on Food Security and Nutrition

In October 2011, the UN Committee on World Food Security (CFS) recommended a ''review of biofuels policies -- where applicable and if necessary -- according to balanced science-based assessments of the opportunities and challenges that they may represent for food security so that biofuels can be produced where it is socially, economically and environmentally feasible to do so''. In line with this, the CFS requested the HLPE (High Level Panel of Experts) to ''conduct a science-based comparative literature analysis taking into consideration the work produced by the FAO and Global Bioenergy Partnership (GBEP) of the positive and negative effects of biofuels on food security''. Recommendations from the report include the following. Food security policies and biofuel policies cannot be separated because they mutually interact. Food security and the right to food should be priority concerns in the design of any biofuel policy. Governments should adopt the principle: biofuels shall not compromise food security and therefore should be managed so that food access or the resources necessary for the production of food, principally land, biodiversity, water and labour are not put at risk. The CFS should undertake action to ensure that this principle is operable in the very varied contexts in which all countries find themselves. Given the trend to the emergence of a global biofuels market, and a context moving from policy-driven to market-driven biofuels, there is an urgent need for close and pro-active coordination of food security, biofuel/bioenergy policies and energy policies, at national and international levels, as well as rapid response mechanisms in case of crisis. There is also an urgent need to create an enabling, responsible climate for food and non-food investments compatible with food security. The HLPE recommends that governments adopt a coordinated food security and energy security strategy, which would require articulation around the following five axes/dimensions: Adapt to the change to global, market-driven dynamics; Address the land, water and resource implications of biofuel policies; Foster the transition from biofuels to comprehensive food-energy policies; Promote research and development; and, Develop methods and guidelines for coordinated food, Biofuels, and bio-energy policies at national and international levels.

09 BIOMASS FUELS↗
DOE OSTI2015

Challenge clusters facing LCA in environmental decision-making—what we can learn from biofuels

Purpose: Bioenergy is increasingly used to help meet greenhouse gas (GHG) and renewable energy targets. However, bioenergy’s sustainability has been questioned, resulting in increasing use of life cycle assessment (LCA). Bioenergy systems are global and complex, and market forces can result in significant changes, relevant to LCA and policy. The goal of this paper is to illustrate the complexities associated with LCA, with particular focus on bioenergy and associated policy development, so that its use can more effectively inform policymakers. Methods: The review is based on the results from a series of workshops focused on bioenergy life cycle assessment. Expert submissions were compiled and categorized within the first two workshops. Over 100 issues emerged. Accounting for redundancies and close similarities in the list, this reduced to around 60 challenges, many of which are deeply interrelated. Some of these issues were then explored further at a policy-facing workshop in London, UK. The authors applied a rigorous approach to categorize the challenges identified to be at the intersection of biofuels/bioenergy LCA and policy. Results and discussion: The credibility of LCA is core to its use in policy. Even LCAs that comply with ISO standards and policy and regulatory instruments leave a great deal of scope for interpretation and flexibility. Within the bioenergy sector, this has led to frustration and at times a lack of obvious direction. This paper identifies the main challenge clusters: overarching issues, application and practice and value and ethical judgments. Many of these are reflective of the transition from application of LCA to assess individual products or systems to the wider approach that is becoming more common. Uncertainty in impact assessment strongly influences planning and compliance due to challenges in assigning accountability, and communicating the inherent complexity and uncertainty within bioenergy is becoming of greater importance. Conclusions: The emergence of LCA in bioenergy governance is particularly significant because other sectors are likely to transition to similar governance models. LCA is being stretched to accommodate complex and broad policy-relevant questions, seeking to incorporate externalities that have major implications for long-term sustainability. As policy increasingly relies on LCA, the strains placed on the methodology are becoming both clearer and impedimentary. The implications for energy policy, and in particular bioenergy, are large.

09 BIOMASS FUELS↗
DOE OSTI2015

jacobteter/CropWatR

Biofuels policies induce land use changes (LUC), including cropland expansion and crop switching, and this in turn alters water and soil management practices. Policies differ in the extent and type of land use changes they induce and therefore in their impact on water resources. We quantify and compare the spatially varying water impacts of biofuel crops stemming from LUC induced by two different biofuels policies by coupling a biophysical model with an economic model to simulate the economically viable mix of crops, land uses, and crop management choices under alternative policy scenarios. We assess the outputs of an economic model with a high-resolution crop-water model for major agricultural crops and potential cellulosic feedstocks in the US to analyze the impacts of three alternative policy scenarios on water balances: a counterfactual ‘no-biofuels policy’ (BAU) scenario, a volumetric mandate (Mandate) scenario, and a clean fuel-intensity standard (CFS) scenario incentivizing fuels based on their carbon intensities. While both biofuel policies incentivize more biofuels than in the counterfactual, they differ in the mix of corn ethanol and advanced biofuels from miscanthus and switchgrass (more corn ethanol in Mandate and more cellulosic biofuels in CFS). The two policies differ in their impact on irrigated acreage, irrigation demand, groundwater use and runoff. Net irrigation requirements increase 0.7% in Mandate and decrease 3.8% in CFS, but in both scenarios increases are concentrated in regions of Kansas and Nebraska that rely upon the Ogallala aquifer for irrigation water. Our study illustrates the importance of accounting for the overall LUC and shifts in agricultural production and management practices in response to policies when assessing the water impacts of biofuels.

Teter, Jacob↗
DOE OSTI2018

Water impacts of U.S. biofuels: Insights from an assessment combining economic and biophysical models

Biofuels policies induce land use changes (LUC), including cropland expansion and crop switching, and this in turn alters water and soil management practices. Policies differ in the extent and type of land use changes they induce and therefore in their impact on water resources. We quantify and compare the spatially varying water impacts of biofuel crops stemming from LUC induced by two different biofuels policies by coupling a biophysical model with an economic model to simulate the economically viable mix of crops, land uses, and crop management choices under alternative policy scenarios. We assess the outputs of an economic model with a high-resolution crop-water model for major agricultural crops and potential cellulosic feedstocks in the US to analyze the impacts of three alternative policy scenarios on water balances: a counterfactual ‘no-biofuels policy’ (BAU) scenario, a volumetric mandate (Mandate) scenario, and a clean fuel-intensity standard (CFS) scenario incentivizing fuels based on their carbon intensities. While both biofuel policies incentivize more biofuels than in the counterfactual, they differ in the mix of corn ethanol and advanced biofuels from miscanthus and switchgrass (more corn ethanol in Mandate and more cellulosic biofuels in CFS). The two policies differ in their impact on irrigated acreage, irrigation demand, groundwater use and runoff. Net irrigation requirements increase 0.7% in Mandate and decrease 3.8% in CFS, but in both scenarios increases are concentrated in regions of Kansas and Nebraska that rely upon the Ogallala aquifer for irrigation water. Our study illustrates the importance of accounting for the overall LUC and shifts in agricultural production and management practices in response to policies when assessing the water impacts of biofuels.

09 BIOMASS FUELS↗
DOE OSTI2014

RBAC Driven Least Privilege Architecture For Control Systems

The concept of role based access control (RBAC) within the IT environment has been studied by researchers and was supported by NIST (circa 1992). This earlier work highlighted the benefits of RBAC which include reduced administrative workload and policies which are easier to analyze and apply. The goals of this research were to expand the application of RBAC in the following ways. Apply RBAC to the control systems environment: The typical RBAC model within the IT environment is used to control a user’s access to files. Within the control system environment files are replaced with measurement (e.g., temperature) and control (e.g. valve) points organized as a hierarchy of control assets (e.g. a boiler, compressor, refinery unit). Control points have parameters (e.g., high alarm limit, set point, etc.) associated with them. The RBAC model is extended to support access to points and their parameters based upon roles while at the same time allowing permissions for the points to be defined at the asset level or point level directly. In addition, centralized policy administration with distributed access enforcement mechanisms was developed to support the distributed architecture of distributed control systems and SCADA; Extend the RBAC model to include access control for software and devices: The established RBAC approach is to assign users to roles. This work extends that notion by first breaking the control system down into three layers 1) users, 2) software and 3) devices. An RBAC model is then created for each of these three layers. The result is that RBAC can be used to define machine-to-machine policy enforced via the IP security (IPsec) protocol. This highlights the potential to use RBAC for machine-to-machine connectivity within the internet of things; and Enable dynamic policy based upon the operating mode of the system: The IT environment is generally static with respect to policy. However, large cyber physical systems such as industrial controls have various operating modes (start-up, normal operation, emergency, shut-down and maintenance are typical). The policy enforcement architecture must be able to support changes in access permissions as the mode of the control system changes. For example an operator’s role may not allow the operator to shut down a pump during “normal operation” but that same operator role may be given permission to shut down the pump if the refinery transitions to “emergency” mode. The effectiveness of the approach was validated by applying it to the Experion Process Knowledge System. This is a large commercial industrial control system often used to control oil refineries and other assets within the oil and gas sector. As a by-product, other industries using Experion (Pharmaceuticals, Specialty Chemicals, etc.) also benefit from increased security. Policies representative of those that would be used within an oil refinery were created and validated against the RBAC model as implemented in the underlying SQL database. The administration of policy is simplified which in turn makes it practical for security administrators to specify policies which enforce least privilege. The result is a qualitative reduction in risk. The benefits of the enhanced RBAC model are clear and as a result. Honeywell is incorporating portions of the RBAC research into the 2014 release of Experion.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Role-based access control permissions

Devices, systems, and methods for role-based access control permissions are disclosed. One method includes a policy decision point that receives up-to-date security context information from one or more outside sources to determine whether to grant access for a data client to a portion of the system and creates an access vector including the determination; receiving, via a policy agent, a request by the data client for access to the portion of the computing system by the data client, wherein the policy agent checks to ensure there is a session established with communications and user/application enforcement points; receiving, via communications policy enforcement point, the request from the policy agent, wherein the communications policy enforcement point determines whether the data client is an authorized node, based upon the access vector received from the policy decision point; and receiving, via the user/application policy enforcement point, the request from the communications policy enforcement point.

42 ENGINEERING↗