Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Periodicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Ground motion modeling of Hayward fault scenario earthquakes II:Simulation of long-period and broadband ground motions

We simulate long-period (T > 1.0-2.0 s) and broadband (T > 0.1 s) ground motions for 39 scenarios earthquakes (Mw 6.7-7.2) involving the Hayward, Calaveras, and Rodgers Creek faults. For rupture on the Hayward fault we consider the effects of creep on coseismic slip using two different approaches, both of which reduce the ground motions compared with neglecting the influence of creep. Nevertheless, the scenario earthquakes generate strong shaking throughout the San Francisco Bay area with about 50% of the urban area experiencing MMI VII or greater for the magnitude 7.0 scenario events. Long-period simulations of the 2007 Mw 4.18 Oakland and 2007 Mw 4.5 Alum Rock earthquakes show that the USGS Bay Area Velocity Model version 08.3.0 permits simulation of the amplitude and duration of shaking throughout the San Francisco Bay area, with the greatest accuracy in the Santa Clara Valley (San Jose area). The ground motions exhibit a strong sensitivity to the rupture length (or magnitude), hypocenter (or rupture directivity), and slip distribution. The ground motions display a much weaker sensitivity to the rise time and rupture speed. Peak velocities, peak accelerations, and spectral accelerations from the synthetic broadband ground motions are, on average, slightly higher than the Next Generation Attenuation (NGA) ground-motion prediction equations. We attribute at least some of this difference to the relatively narrow width of the Hayward fault ruptures. The simulations suggest that the Spudich and Chiou (2008) directivity corrections to the NGA relations could be improved by including a dependence on the rupture speed and increasing the areal extent of rupture directivity with period. The simulations also indicate that the NGA relations may under-predict amplification in shallow sedimentary basins.

58 GEOSCIENCES↗

Modeling of general 1-D periodic leaky-wave antennas in layered media with EIGER.

This paper presents a mixed-potential integral-equation formulation for analyzing 1-D periodic leaky-wave antennas in layered media. The structures are periodic in one dimension and finite in the other two dimensions. The unit cell consists of an arbitrary-shaped metallic/dielectric structure. The formulation has been implemented in the EIGER{trademark} code in order to obtain the real and complex propagation wavenumbers of the bound and leaky modes of such structures. Validation results presented here include a 1-D periodic planar leaky-wave antenna and a fully 3-D waveguide test case.

99 GENERAL AND MISCELLANEOUS↗

Efficient calculation of 1-D periodic Green's functions for leaky-wave applications.

In this paper an approach is described for the efficient computation of the mixed-potential scalar and dyadic Green's functions for a one-dimensional periodic (periodic along x direction) array of point sources embedded in a planar stratified structure. Suitable asymptotic extractions are performed on the slowly converging spectral series. The extracted terms are summed back through the Ewald method, modified and optimized to efficiently deal with all the different terms. The accelerated Green's functions allow for complex wavenumbers, and are thus suitable for application to leaky-wave antennas analysis. Suitable choices of the spectral integration paths are made in order to account for leakage effects and the proper/improper nature of the various space harmonics that form the 1-D periodic Green's function.

99 GENERAL AND MISCELLANEOUS↗

A Gaussian Process Based Online Change Detection Algorithm for Monitoring Periodic Time Series

Online time series change detection is a critical component of many monitoring systems, such as space and air-borne remote sensing instruments, cardiac monitors, and network traffic profilers, which continuously analyze observations recorded by sensors. Data collected by such sensors typically has a periodic (seasonal) component. Most existing time series change detection methods are not directly applicable to handle such data, either because they are not designed to handle periodic time series or because they cannot operate in an online mode. We propose an online change detection algorithm which can handle periodic time series. The algorithm uses a Gaussian process based non-parametric time series prediction model and monitors the difference between the predictions and actual observations within a statistically principled control chart framework to identify changes. A key challenge in using Gaussian process in an online mode is the need to solve a large system of equations involving the associated covariance matrix which grows with every time step. The proposed algorithm exploits the special structure of the covariance matrix and can analyze a time series of length T in O(T^2) time while maintaining a O(T) memory footprint, compared to O(T^4) time and O(T^2) memory requirement of standard matrix manipulation methods. We experimentally demonstrate the superiority of the proposed algorithm over several existing time series change detection algorithms on a set of synthetic and real time series. Finally, we illustrate the effectiveness of the proposed algorithm for identifying land use land cover changes using Normalized Difference Vegetation Index (NDVI) data collected for an agricultural region in Iowa state, USA. Our algorithm is able to detect different types of changes in a NDVI validation data set (with ~80% accuracy) which occur due to crop type changes as well as disruptive changes (e.g., natural disasters).

54 ENVIRONMENTAL SCIENCES↗

Modeling of general 1-D periodic leaky-wave antennas in layered media using EIGER.

This paper presents a mixed-potential integral-equation formulation for analyzing 1-D periodic leaky-wave antennas in layered media. The structures are periodic in one dimension and finite in the other two dimensions. The unit cell consists of an arbitrary-shaped metallic/dielectric structure. The formulation has been implemented in the EIGER{trademark} code in order to obtain the real and complex propagation wavenumbers of the bound and leaky modes of such structures. Validation results presented here include a 1-D periodic planar leaky-wave antenna and a fully 3-D waveguide test case.

99 GENERAL AND MISCELLANEOUS↗

Homogenization for Periodic Heterogeneous Materials with Arbitrary Position-Dependent Material Properties

We present a rigorous homogenization approach for efficient computation of a class of physical problems in a one-dimensional periodic heterogeneous material. This material is represented by a spatially periodic array of unit cells with a length of e. More specifically, the method is applied to the diffusion, heat conduction, and wave propagation problems. Heterogeneous materials can have arbitrary position-dependent continuous or discontinuous materials properties (for example heat conductivity) within the unit cell. The final effective model includes both effective properties at the leading order and high-order contributions due to the microscopic heterogeneity. A dimensionless heterogeneity parameter ß is defined to represent high-order contributions, shown to be in the range of [-1/12, 0], and has a universal expression for all three problems. Both effective properties and heterogeneity parameter ß are independent of e, the microscopic scale of heterogeneity. The homogenized solution describing macroscopic variations can be obtained from the effective model. Solution with sub-unit-cell accuracy can be constructed based on the homogenized solution and its spatial derivatives. The paper represents a general approach to obtain the effective model for arbitrary periodic heterogeneous materials with position-dependent properties.

conduction↗

Theoretical Modeling of Electromagnetic Field from Electron Bunches in Periodic Wire Medium

The interaction of relativistic electrons with periodic conducting structures results in radiation via a number of mechanisms. In case of crystals one obtains parametric X-ray radiation, its frequency is determined by the distance between crystallographic planes and the direction of electron beam. If instead of a crystal one considers a periodic structure of metallic wires with the spacing of the order of mm, it is plausible to expect the emission of radiation of a similar nature (“diffraction response”) at THz frequencies. Additionally, a “long-wave” radiation will occur in this case with wavelengths much larger then structure periods. In this contribution, we present different theoretical approaches for describing the electromagnetic radiation field from prolonged electron bunch propagated in the lattice of metallic wires. The validity of these analytical descriptions is checked by numerical simulations. We discuss the possible applications of aforementioned structure as sources of coherent THz radiation.

43 PARTICLE ACCELERATORS↗

Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) Winter Intensive Operational Period: Aerodynamic Particle Sizer Field Campaign Report

An aerodynamic particle sizer spectrometer (APS, model 3321 by TSI Inc., Shoreview, Minnesota) was deployed at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Eastern North Atlantic (ENA) observatory during the second (winter) intensive operational period (IOP) of the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) field campaign. Data were collected from January 9 through February 26, 2018, covering the second deployment of the ARM Aerial Facility (AAF) aircraft within ACE-ENA. The standard ENA instrument suite does not provide measurements of aerosol particle size distribution for diameters greater than one micron. Properties of coarse-mode (super-micron) aerosols are rarely measured, although super-micron particles can play an important role in the aerosol life cycle, affecting aerosol optical properties and cloud nuclei activity (e.g., Clarke et al. 2003). The APS was deployed to fill this gap in particle size measurements: it is capable of measuring size-resolved concentration of the aerosols in the 0.5-20 μm range (aerodynamic diameter). The APS was installed in the aerosol trailer to sample through the main stack. Special attention was given to selection of the instrument location (just below the main stack) to minimize particle losses in the connecting lines. Most atmospheric aerosols are hygroscopic, so the measurement of the aerosol size distributions should either be performed in a controlled humidity environment or accompanied by concurrent measurement of the temperature and humidity of the sample air. The latter strategy was used during this deployment: a high-precision humidity/temperature transmitter (model EE08 by E+E Elektonik GMBH, Engerwitzdorf, Germany) was mounted in the APS sampling line immediately upstream of the APS inlet. A dedicated laptop computer was used for data collection and communications. The APS was controlled with vendor-supplied software (Aerosol Instrument Manager, ver. 10.1, TSI); aerosol size distribution data were collected over a period of 55 seconds and converted to one-minute averages. Temperature and humidity analog signals were acquired via analog-to-digital converter (ADC) module (model WTAIN-M by Weeder Technologies, Fort Walton Beach, Florida) using vendor-supplied software (ModCom) with 1- sec resolution. In post-processing, the APS data were exported from TSI proprietary format into “comma-separated value” American Standard Code for Information Interchange (ASCII) files and matched with appropriately averaged temperature and humidity data. Two significant periods of missing data were caused by local power outages. Vendor-supplied software was not designed for unattended operation: it needs to be manually restarted including sensor configuration setup.

ACE-ENA, Azores, ultra-high-sensitivity aerosol sp↗

Cascaded systems and methods for controlling energy use during a demand limiting period

A cascaded control system is configured to control power consumption of a building during a demand limiting period. The cascaded control system includes an energy use setpoint generator and a feedback controller. The energy use setpoint generator is configured to use energy pricing data and measurements of a variable condition within the building to generate an energy use setpoint during the demand limiting period. The feedback controller is configured to use a difference between the energy use setpoint and a measured energy use to generate a control signal for building equipment that operate to affect the variable condition within the building during the demand limiting period.

Wenzel, Michael J.↗

Cascaded systems and methods for controlling energy use during a demand limiting period

A cascaded control system is configured to control power consumption of a building during a demand limiting period. The cascaded control system includes an energy use setpoint generator and a feedback controller. The energy use setpoint generator is configured to use energy pricing data and measurements of a variable condition within the building to generate an energy use setpoint during the demand limiting period. The feedback controller is configured to use a difference between the energy use setpoint and a measured energy use to generate a control signal for building equipment that operate to affect the variable condition within the building during the demand limiting period.

Wenzel, Michael J.↗

Integrated Transmission-Distribution Multi-Period Switching for Wildfire Risk Mitigation: Improving Speed and Scalability with Distributed Optimization: Preprint

With increasingly severe wildfire conditions driven by climate change, utilities must manage the risk of wildfire ignitions from electric power lines. During "public safety power shutoff'" events, utilities de-energize power lines to reduce wildfire ignition risk, which may result in load shedding. Distributed energy resources provide flexibility that can help support the system to reduce load shedding when lines are de-energized. We investigate a coordinated transmission-distribution optimization problem that balances wildfire risk mitigation and load shedding. We model distribution systems that include battery energy storage systems which may support loads when transmission lines are de-energized. This multi-period integrated transmission-distribution optimal switching problem jointly optimizes line switching decisions, the generators' setpoints, load shedding, and the batteries' states of charge, resulting in significant computational challenges. To improve scalability, we decompose the problem over both space and time and apply a distributed optimization algorithm. Using a large-scale synthetic California test case with realistic distribution models and real wildfire risk data, we show that distributed optimization can solve large-scale multi-period switching problems that are otherwise intractable for centralized solvers. We also discuss challenges and future directions for improving the distributed algorithm's convergence performance as the number of time periods increases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Solution of Periodic Boundary-Value Problems of the Spatial Theory of Elasticity in the Vector Form

We discuss boundary-value problems for the system of equations of the spatial theory of elasticity in the class of double-periodic functions and obtain a general solution of the system. We distinguish six types of elementary Floquet waves and examine their energy characteristics. We consider fundamental boundary-value problems in the half-space in the vector form. The diffraction problem for an elastic wave on a periodic system of defects in the vector form is reduced to the paired summator functional equation.

97 MATHEMATICS AND COMPUTING↗

Best Practices at the End of Photovoltaic System Performance Period

Responsible and cost-effective dissolution of photovoltaic (PV) system hardware at the end of the performance period has emerged as an important business and environmental consideration. Alternatives include extending the performance period and existing contracts for power purchase, lease, and utility interconnect; refurbishing the plant by correcting any deficiencies; repowering the plant with new PV modules and inverters; or decommissioning the plant and removing all the hardware from the site. Often key decisions are made very early in the project development and might require decommissioning by some certain date after the end of a power purchase agreement. To “abandon in place” is not an alternative acceptable to landowners and regulators, so any financial prospectus should include costs associated with decommissioning, even if those costs are deferred by extending operations, refurbishment, or repowering. Decommissioning costs are driven by regulations regarding the handling and disposal of waste, with reuse and recycling of PV modules and other components preferred as a way to reduce both costs and environmental impact. Each alternative is discussed with order-of-magnitude costs, and recommendations are provided considering site-specific details of that situation, such as estimated costs to refurbish or repower, projected revenue from continued operations, and tax considerations.

14 SOLAR ENERGY↗

Charged-cell periodic DFT simulations via an impurity model based on density embedding: Application to the ionization potential of liquid water

Calculations of charged systems in periodic boundary conditions (PBC) are problematic because there are spurious interactions between the charges in different periodic images that can affect the physical picture. In addition, the intuitive limit of Coulomb interactions decaying to zero as the interacting charges are placed at infinite separation no longer applies, and for example total energies become undefined. Leveraging subsystem density functional theory (also known as density embedding) we define an impurity model that embeds a finite neutral or charged subsystem within an extended (infinite) surrounding subsystem. The combination of the impurity model and a consistent choice of the Coulomb reference provides us with an algorithm for evaluating the ionization potential (IP) in extended systems. Additionally, we demonstrate our approach in a pilot calculation of the IP of liquid water, based on a configuration from a prior ab initio molecular dynamics (AIMD) simulation of liquid water (Genova et al., J. Chem. Phys. 2016, 144, 234105). The calculations with the impurity model capture the broadening on the ionization energies introduced by the interactions between the water molecules. Furthermore, the calculated average IP value (10.5 eV) compare favorably to experiments (9.9-10.06 eV) and very recent simulations based on the GW approximation (10.55 eV), while at the same time outperforming density embedding calculations carried out with a naïve handling of the electrostatic interactions (about 7 eV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of Periodic Composite Structures for Sub-Wavelength Focusing

Recently, there has been plenty of work in designing and fabricating materials with an effective negative refractive index. Veselago realized that a slab of material with a refractive index of -1 would act as a lens. Pendry suggested that the Veselago lens would act as a superlens, providing a perfect image of an object in contrast to conventional lenses which are only able to focus a point source to an image having a diameter of the order of the wavelength of the incident field.Recent work has shown that similar focusing effects can be obtained with certain slabs of 'conventional' periodic composite materials: photonic crystals. The present work seeks to answer the question of what periodic dielectric composite medium (described by dielectric coefficient with positive real part) gives an optimal image of a point source. An optimization problem is formulated and it is shown that a solution exists provided the medium has small absorption. Solutions are characterized by an adjoint-state gradient condition, and several numerical examples illustrate both the plausibility of this design approach, and the possibility of obtaining smaller image spot sizes than with typical photonic crystals.

97 MATHEMATICS AND COMPUTING↗

Periodic p-adic Gibbs Measures of q-State Potts Model on Cayley Trees I: The Chaos Implies the Vastness of the Set of p-Adic Gibbs Measures

We study the set of p-adic Gibbs measures of the q-state Potts model on the Cayley tree of order three. We prove the vastness of the set of the periodic p-adic Gibbs measures for such model by showing the chaotic behavior of the corresponding Potts–Bethe mapping over ℚ{sub p} for the prime numbers p≡1 (mod 3). In fact, for 0<|θ−1|{sub p}<|q|{sub p}{sup 2}<1 where θ=exp{sub p} (J) and J is a coupling constant, there exists a subsystem that is isometrically conjugate to the full shift on three symbols. Meanwhile, for 0<|q|{sub p}{sup 2}≤|θ−1|{sub p}<|q|{sub p}<1, there exists a subsystem that is isometrically conjugate to a subshift of finite type on r symbols where r≥4. However, these subshifts on r symbols are all topologically conjugate to the full shift on three symbols. The p-adic Gibbs measures of the same model for the prime numbers p=2,3 and the corresponding Potts–Bethe mapping are also discussed. On the other hand, for 0<|θ−1|{sub p}<|q|{sub p}<1, we remark that the Potts–Bethe mapping is not chaotic when p=3 and p≡2 (mod 3) and we could not conclude the vastness of the set of the periodic p-adic Gibbs measures. In a forthcoming paper with the same title, we will treat the case 0<|q|{sub p}≤|θ−1|{sub p}<1 for all prime numbers p.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On Periodic Boundary-Value Problems for Systems of Functional-Differential Equations

We obtain necessary and sufficient conditions for the existence of a unique solution to a periodic boundary-value problem for all systems of first-order functional-differential equations from a given family of systems. Families of systems of functional-differential equations are detrmined by the norms of positive functional operators of equations of the system. The verification of necessary and sufficient conditions of the existence of a unique periodic solution for all systems from a given family consists of the verification of positivity of a finite number of a real-valued functions defined on a finite-dimensional set.

97 MATHEMATICS AND COMPUTING↗

A periodic metallo-supramolecular polymer from a flexible building block: self-assembly and photocatalysis for organic dye degradation

A water-soluble metallo-supramolecular polymer MSP-f-6Np , which possesses a regular pore aperture of 1.4 nm, has been assembled from a structurally flexible naphthalene-appended [Ru(bipy) 3 ] 2+ complex and cucurbit[8]uril. As the first periodic metallo-supramolecular polymer formed by a flexible building block, MSP-f-6Np exhibits a hydrodynamic diameter of 122 and 164 nm at 0.1 and 2.0 mM of the monomer concentrations. Synchrotron small angle X-ray scattering experiments confirm that MSP-f-6Np possesses porosity periodicity in both the solution and solid states. Compared with a control, the new highly ordered porous system displays enhanced photocatalytic activity for the degradation of organic dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗