Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parallel processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

An executable specification for the message processor in a simple combining network

While the primary function of the network in a parallel computer is to communicate data between processors, it is often useful if the network can also perform rudimentary calculations. That is, some simple processing ability in the network itself, particularly for performing parallel prefix computations, can reduce both the volume of data being communicated and the computational load on the processors proper. Unfortunately, typical implementations of such networks require a large fraction of the hardware budget, and so combining networks are viewed as being impractical. The FFP Machine has such a combining network, and various characteristics of the machine allow a good deal of simplification in the network design. Despite being simple in construction however, the network relies on many subtle details to work correctly. This paper describes an executable model of the network which will serve several purposes. It provides a complete and detailed description of the network which can substantiate its ability to support necessary functions. It provides an environment in which algorithms to be run on the network can be designed and debugged more easily than they would on physical hardware. Finally, it provides the foundation for exploring the design of the message receiving facility which connects the network to the individual processors.

Middleton, David↗
NASA NTRS1982

A Module Experimental Process System Development Unit (MEPSDU)

Restructuring research objectives from a technical readiness demonstration program to an investigation of high risk, high payoff activities associated with producing photovoltaic modules using non-CZ sheet material is reported. Deletion of the module frame in favor of a frameless design, and modification in cell series parallel electrical interconnect configuration are reviewed. A baseline process sequence was identified for the fabrication of modules using the selected dendritic web sheet material, and economic evaluations of the sequence were completed.

Source record↗
NASA NTRS1988

Low level image processing techniques using the pipeline image processing engine in the flight telerobotic servicer

The sensory processing system for the NASA/NBS Standard Reference Model (NASREM) for telerobotic control is described. This control system architecture was adopted by NASA of the Flight Telerobotic Servicer. The control system is hierarchically designed and consists of three parallel systems: task decomposition, world modeling, and sensory processing. The Sensory Processing System is examined, and in particular the image processing hardware and software used to extract features at low levels of sensory processing for tasks representative of those envisioned for the Space Station such as assembly and maintenance are described.

Nashman, Marilyn↗
NASA NTRS1992

Parallel implementation of an algorithm for Delaunay triangulation

This work concerns the theory and practice of implementing Tanemura's algorithm for 3D Delaunay triangulation on Intel's Gamma prototype, a 128 processor MIMD computer. Tanemura's algorithm does not vectorize to any significant degree and requires indirect addressing. Efficient implementation on a conventional, vector processing, supercomputer is problematic. Efficient implementation on a parallel architecture is possible, however. In this work, speeds in excess of 8 times a single processor Cray Y-mp are realized on 128 processors of the Intel Gamma prototype.

Merriam, Marshall L.↗
NASA NTRS1989

Performance analysis of fault-tolerant systems in parallel execution of conversations

The execution overhead inherent in the conversation scheme, which is a scheme for realizing fault-tolerant cooperating processes free of the domino effect, is analyzed. Multiprocessor/multicomputer systems capable of parallel execution of conversation components are considered and a queuing network model of such systems is adopted. Based on the queuing model, various performance indicators, including system throughput, average number of processors idling inside a conversation due to the synchronization required, and average time spent in the conversation, have been evaluated numerically for several application environments. The numeric results are discussed and several essential performance characteristics of the conversation scheme are derived. For example, when the number of participant processes is not large, say less than six, the system performance is highly affected by the synchronization required on the processes in a conversation, and not so much by the probability of acceptance-test failure.

Kim, K. H.↗
DOE OSTI2024

Data-flow parallelism for high-energy and nuclear physics computing frameworks

The processing tasks of a scientific workflow in high-energy and nuclear physics (HENP) can typically be represented as a directed acyclic graph formed according to the data flow—i.e. the data dependencies among algorithms executed as part of the workflow. With this representation, an HENP computing framework can optimally execute a workflow, exploiting the parallelism inherent among independent tasks. Despite such a natural description of a workflow, most HENP frameworks do not make use of technologies that provide concurrent execution of graph-based tasking structures. In this session, we describe Fermilab efforts to adopt a graph-based technology (specifically Intel’s oneTBB flow graph) for meeting the framework needs of its experiments, notably DUNE. After introducing the physics DUNE intends to explore, we will show that all common processing idioms supported by current HENP frameworks can naturally be supported by oneTBB’s data-flow technology, optimally leveraging the concurrent capabilities of the machine. In addition, we discuss collaborative efforts between Fermilab and the Intel oneTBB development team, who is considering improvements to the flow-graph technology to better support HENP use cases.

43 PARTICLE ACCELERATORS↗
NASA NTRS2011

High-Performance Data Analysis Tools for Sun-Earth Connection Missions

The data analysis tool of choice for many Sun-Earth Connection missions is the Interactive Data Language (IDL) by ITT VIS. The increasing amount of data produced by these missions and the increasing complexity of image processing algorithms requires access to higher computing power. Parallel computing is a cost-effective way to increase the speed of computation, but algorithms oftentimes have to be modified to take advantage of parallel systems. Enhancing IDL to work on clusters gives scientists access to increased performance in a familiar programming environment. The goal of this project was to enable IDL applications to benefit from both computing clusters as well as graphics processing units (GPUs) for accelerating data analysis tasks. The tool suite developed in this project enables scientists now to solve demanding data analysis problems in IDL that previously required specialized software, and it allows them to be solved orders of magnitude faster than on conventional PCs. The tool suite consists of three components: (1) TaskDL, a software tool that simplifies the creation and management of task farms, collections of tasks that can be processed independently and require only small amounts of data communication; (2) mpiDL, a tool that allows IDL developers to use the Message Passing Interface (MPI) inside IDL for problems that require large amounts of data to be exchanged among multiple processors; and (3) GPULib, a tool that simplifies the use of GPUs as mathematical coprocessors from within IDL. mpiDL is unique in its support for the full MPI standard and its support of a broad range of MPI implementations. GPULib is unique in enabling users to take advantage of an inexpensive piece of hardware, possibly already installed in their computer, and achieve orders of magnitude faster execution time for numerically complex algorithms. TaskDL enables the simple setup and management of task farms on compute clusters. The products developed in this project have the potential to interact, so one can build a cluster of PCs, each equipped with a GPU, and use mpiDL to communicate between the nodes and GPULib to accelerate the computations on each node.

Messmer, Peter↗
NASA NTRS1992

Scheduling message processing for reducing rollback propagation

Traditional checkpointing and rollback recovery techniques for parallel systems have typically assumed the communication pattern is specified by program behavior. In this paper we exploit the property that the communication pattern can often be changed at run-time without affecting program correctness. A scheduling algorithm for message processing and its implementation for reducing rollback propagation are described. The algorithm incorporates a user-transparent prioritized scheme based upon the run-time communication and checkpointing history. Communication trace-driven simulation for several parallel programs written in the Chare Kernel language demonstrates that the probability of rollback propagation can be reduced at the cost of slight additional performance degradation.

Wang, Yi-Min↗
DOE OSTI2023

Towards a Standard Process Management Infrastructure for Workflows Using Python

Orchestrating the execution of ensembles of processes lies at the core of scientific workflow engines on large scale parallel platforms. This is usually handled using platform-specific command line tools, with limited process management control and potential strain on system resources. The PMIx standard provides a uniform interface to system resources. The low level C implementation of PMIx has hampered its use in workflow engines, leading to the development of Python binding that has yet to gain traction. In this paper, we present our work to harden the PMIx Python client, demonstrating its usability using a prototype Python driver to orchestrate the execution of an ensemble of processes. We present experimental results using the prototype on the Summit supercomputer at Oak Ridge National Laboratory. This work lays the foundation for wider adoption of PMIx for workflow engines, and encourages wider support of more PMIx functionality in vendor provided system software stacks.

Elwasif, Wael↗
NASA NTRS2001

Parallelization of Program to Optimize Simulated Trajectories (POST3D)

This paper describes the parallelization of the Program to Optimize Simulated Trajectories (POST3D). POST3D uses a gradient-based optimization algorithm that reaches an optimum design point by moving from one design point to the next. The gradient calculations required to complete the optimization process, dominate the computational time and have been parallelized using a Single Program Multiple Data (SPMD) on a distributed memory NUMA (non-uniform memory access) architecture. The Origin2000 was used for the tests presented.

Hammond, Dana P.↗
NASA NTRS2013

SequenceL: Automated Parallel Algorithms Derived from CSP-NT Computational Laws

With the introduction of new parallel architectures like the cell and multicore chips from IBM, Intel, AMD, and ARM, as well as the petascale processing available for highend computing, a larger number of programmers will need to write parallel codes. Adding the parallel control structure to the sequence, selection, and iterative control constructs increases the complexity of code development, which often results in increased development costs and decreased reliability. SequenceL is a high-level programming language that is, a programming language that is closer to a human s way of thinking than to a machine s. Historically, high-level languages have resulted in decreased development costs and increased reliability, at the expense of performance. In recent applications at JSC and in industry, SequenceL has demonstrated the usual advantages of high-level programming in terms of low cost and high reliability. SequenceL programs, however, have run at speeds typically comparable with, and in many cases faster than, their counterparts written in C and C++ when run on single-core processors. Moreover, SequenceL is able to generate parallel executables automatically for multicore hardware, gaining parallel speedups without any extra effort from the programmer beyond what is required to write the sequen tial/singlecore code. A SequenceL-to-C++ translator has been developed that automatically renders readable multithreaded C++ from a combination of a SequenceL program and sample data input. The SequenceL language is based on two fundamental computational laws, Consume-Simplify- Produce (CSP) and Normalize-Trans - pose (NT), which enable it to automate the creation of parallel algorithms from high-level code that has no annotations of parallelism whatsoever. In our anecdotal experience, SequenceL development has been in every case less costly than development of the same algorithm in sequential (that is, single-core, single process) C or C++, and an order of magnitude less costly than development of comparable parallel code. Moreover, SequenceL not only automatically parallelizes the code, but since it is based on CSP-NT, it is provably race free, thus eliminating the largest quality challenge the parallelized software developer faces.

Cooke, Daniel↗
NASA NTRS1987

Plasma simulation using the massively parallel processor

Two dimensional electrostatic simulation codes using the particle-in-cell model are developed on the Massively Parallel Processor (MPP). The conventional plasma simulation procedure that computes electric fields at particle positions by means of a gridded system is found inefficient on the MPP. The MPP simulation code is thus based on the gridless system in which particles are assigned to processing elements and electric fields are computed directly via Discrete Fourier Transform. Currently, the gridless model on the MPP in two dimensions is about nine times slower that the gridded system on the CRAY X-MP without considering I/O time. However, the gridless system on the MPP can be improved by incorporating a faster I/O between the staging memory and Array Unit and a more efficient procedure for taking floating point sums over processing elements. The initial results suggest that the parallel processors have the potential for performing large scale plasma simulations.

Lin, C. S.↗
NASA NTRS1983

Electric currents and voltage drops along auroral field lines

An assessment is presented of the current state of knowledge concerning Birkeland currents and the parallel electric field, with discussions focusing on the Birkeland primary region 1 sheets, the region 2 sheets which parallel them and appear to close in the partial ring current, the cusp currents (which may be correlated with the interplanetary B(y) component), and the Harang filament. The energy required by the parallel electric field and the associated particle acceleration processes appears to be derived from the Birkeland currents, for which evidence is adduced from particles, inverted V spectra, rising ion beams and expanded loss cones. Conics may on the other hand signify acceleration by electrostatic ion cyclotron waves associated with beams accelerated by the parallel electric field.

Stern, D. P.↗
NASA NTRS1999

A Robust and Scalable Software Library for Parallel Adaptive Refinement on Unstructured Meshes

The design and implementation of Pyramid, a software library for performing parallel adaptive mesh refinement (PAMR) on unstructured meshes, is described. This software library can be easily used in a variety of unstructured parallel computational applications, including parallel finite element, parallel finite volume, and parallel visualization applications using triangular or tetrahedral meshes. The library contains a suite of well-designed and efficiently implemented modules that perform operations in a typical PAMR process. Among these are mesh quality control during successive parallel adaptive refinement (typically guided by a local-error estimator), parallel load-balancing, and parallel mesh partitioning using the ParMeTiS partitioner. The Pyramid library is implemented in Fortran 90 with an interface to the Message-Passing Interface (MPI) library, supporting code efficiency, modularity, and portability. An EM waveguide filter application, adaptively refined using the Pyramid library, is illustrated.

Lou, John Z.↗
DOE OSTI2020

Exploring the Acceleration Mechanisms for Particle Injection and Power-law Formation during Transrelativistic Magnetic Reconnection

Magnetic reconnection in the relativistic and transrelativistic regimes is able to accelerate particles to hard power-law energy spectra f ∝ γ -p (approaching p = 1). The underlying acceleration mechanism that determines the spectral shape is currently a topic of intense investigation. By means of fully kinetic plasma simulations, we carry out a study of particle acceleration during magnetic reconnection in the transrelativistic regime of a proton–electron plasma. While earlier work in this parameter regime has focused on the effects of electric field parallel to the local magnetic field on the particle injection (from thermal energy to the lower-energy bound of the power-law spectrum), here we examine the roles of both parallel and perpendicular electric fields to gain a more complete understanding on the injection process and further development of a power-law spectrum. We show that the parallel electric field does contribute significantly to particle injection, and is more important in the initial phase of magnetic reconnection. However, as the simulation proceeds, the acceleration by the perpendicular electric field becomes more important for particle injection and completely dominates the acceleration responsible for the high-energy power-law spectrum. This holds robustly, in particular for longer reconnection times and larger systems, i.e., in simulations that are more indicative of the processes in astrophysical sources.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Systems and methods for rapid processing and storage of data

Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

Stalzer, Mark A.↗
NASA NTRS1988

Staging memory for massively parallel processor

The invention herein relates to a computer organization capable of rapidly processing extremely large volumes of data. A staging memory is provided having a main stager portion consisting of a large number of memory banks which are accessed in parallel to receive, store, and transfer data words simultaneous with each other. Substager portions interconnect with the main stager portion to match input and output data formats with the data format of the main stager portion. An address generator is coded for accessing the data banks for receiving or transferring the appropriate words. Input and output permutation networks arrange the lineal order of data into and out of the memory banks.

Batcher, Kenneth E.↗
NASA NTRS1979

Logarithmic spiral grids for image processing

A picture digitization grid based on logarithmic spirals rather than Cartesian coordinates is presented. Expressing this curvilinear grid as a conformal exponential mapping reveals useful image processing properties. The mapping induces a computational simplification that suggests parallel architectures in which most geometric transformations are effected by data shifting in memory rather than arithmetic on coordinates. These include fast, parallel noise-free rotation, scaling, and some projective transformations of pixel defined images. Conformality of the mapping preserves local picture-processing operations such as edge detection.

Weiman, C. F. R.↗