Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOEMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Effect of K doping on CuPc: C{sub 60} heterojunctions

Here, the electronic properties of K-doped copper phthalocyanine (CuPc): C{sub 60} heterojunctions are studied via synchrotron-radiation photoemission. The K-doped heterointerfaces were obtained by means of C{sub 60} on K{sub 1.5}CuPc and CuPc on K{sub 3}C{sub 60}. The photoelectron spectra show that the potassium prefers to combine with C{sub 60}. At the C{sub 60}/K{sub 1.5}CuPc interface, the K diffuses and transfers negative charge into the C{sub 60} overlayer, while no strong chemical reaction could be found at the CuPc/K{sub 3}C{sub 60} interface. A significant shift of the vacuum level was observed in both cases, which was caused by the charge transfer for the C{sub 60}/K{sub 1.5}CuPc and by the induced density of interface states (IDIS) dipole for the CuPc/K{sub 3}C{sub 60}. The energy level diagrams show that using C{sub 60} adsorption on a K-doped CuPc film is good for the improvement of photovoltaic devices. However, the inverse process, that of CuPc on a K-doped C{sub 60}, is unfavorable for the photovoltaic effect.

36 MATERIALS SCIENCE↗

Chemical composition and thermal stability of GaAs oxides grown by AFM anodic oxidation for site-controlled growth of InAs quantum dots

We have fabricated GaAs oxides by using atomic force microscope (AFM)-assisted anodic oxidation at various bias voltages, V{sub ox}, and studied their chemical compositions and thermal stabilities. The oxides grown at bias voltages less than 30 V desorbed after standard thermal cleaning in molecular beam epitaxy, while the oxide patterns fabricated at V{sub ox}{>=}40 V survived on the surface. We have further investigated the chemical composition of the oxides by X-ray photoemission spectroscopy. It has been found that the AFM oxides grown at V{sub ox}{approx}10 V predominantly consist of Ga{sub 2}O and GaO, whereas those grown at V{sub ox}{approx}50 V contain a Ga{sub 2}O{sub 3}-component. This result indicates that the better thermal stability of AFM oxides grown at V{sub ox}{>=}40 V can be attributed to the formation of Ga{sub 2}O{sub 3}. We grew a GaAs buffer layer on the oxide nanomasks and obtained nanoholes. After supplying InAs, selective dot nucleation took place in the nanoholes, resulting in successful formation of site-controlled QDs.

36 MATERIALS SCIENCE↗

The effect of step geometry in copper oxidation by hyperthermal O{sub 2} molecular beam: Cu(511) vs Cu(410)

Steps are known to be often the active sites for the dissociation of O{sub 2} molecules and the nucleation sites of oxide films since they provide paths for subsurface migration and oxygen incorporation. In order to unravel the effect of their morphology on the oxidation of Cu surfaces, we present here a detailed investigation of the O{sub 2} interaction with Cu(511) and compare it with previous results for Cu(410), a surface exhibiting terraces of similar size and geometry but different step morphology. As for Cu(410) we find, by x-ray photoemission spectroscopy performed with synchrotron radiation, that Cu{sub 2}O formation gradually starts above half a monolayer oxygen coverage and that the ignition of oxidation can be lowered to room temperature by dosing O{sub 2} via a supersonic molecular beam at hyperthermal energy. The oxidation rate for Cu(511) comes out to be lower than for Cu(410) at normal incidence, about the same when the O{sub 2} molecules impinge towards the ascending step rise, but higher when they hit the surface along trajectories even slightly inclined towards the descending step rise. These findings can be rationalized by a collision induced absorption mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of the deuterium ion toroidal rotation in the DIII-D tokamak and comparison to neoclassical theory

Bulk ion toroidal rotation plays a critical role in controlling microturbulence and MHD stability as well as yielding important insight into angular momentum transport and the investigation of intrinsic rotation. So far, our understanding of bulk plasma flow in hydrogenic plasmas has been inferred from impurity ion velocity measurements and neoclassical theoretical calculations. However, the validity of these inferences has not been tested rigorously through direct measurement of the main-ion rotation in deuterium plasmas, particularly in regions of the plasma with steep pressure gradients where very large differences can be expected between bulk ion and impurity rotation. New advances in the analysis of wavelength-resolved D{sub {alpha}} emission on the DIII-D tokamak [J. L. Luxon et al., Fusion Sci. Technol. 48, 807 (2002)] have enabled accurate measurements of the main-ion (deuteron) temperature and toroidal rotation. The D{sub {alpha}} emission spectrum is accurately fit using a model that incorporates thermal deuterium charge exchange, beam emission, and fast ion D{sub {alpha}} (FIDA) emission spectra. Simultaneous spectral measurements of counter current injected and co current injected neutral beams permit a direct determination of the deuterium toroidal velocity. Time-dependent collisional radiative modeling of the photoemission process is in quantitative agreement with measured spectral characteristics. L-mode discharges with low beam ion densities and broad thermal pressure profiles exhibit deuteron temperature and toroidal rotation velocities similar to carbon. However, intrinsic rotation H-mode conditions and plasmas with internal transport barriers exhibit differences between core deuteron and carbon rotation which are inconsistent with the sign and magnitude of the neoclassical predictions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Disordered surface structure of an ultra-thin tin oxide film on Rh(100)

The composition and structure of an ultra-thin tin oxide film on Rh(100), prepared by the deposition of a submonolayer of tin followed by annealing in an O{sub 2} atmosphere, were examined by a combination of low-energy electron diffraction (LEED), Auger electron spectroscopy, X-ray photoemission spectroscopy (XPS), scanning tunneling microscopy (STM), and ab initio calculations based on density functional theory (DFT). Although the LEED pattern exhibited c(2 x 8) spots clearly, a uniform periodicity of the c(2 x 8) unit cell was not observed in the STM images. The bright dots that were observed periodically in the STM image were similar to those of the ultra-thin Sn{sub 2}O{sub 3} film on Rh(111) and formed a zigzag arrangement with the numerous point and line defects. The XPS study revealed that the Sn 3d{sub 5/2} peak of the tin oxide film on Rh(100) showed a metallic state as well as an oxide state that was between the SnO{sub 2} and SnO states. The structural models, which were based on the Sn{sub 2}O{sub 3} structure on Rh(111), were determined using DFT total energy calculations. The simulated STM images of the two slightly different honeycomb-chain models well reproduced the zigzag arrangement in the STM image. The STM image and XPS spectrum were interpreted using a combination of the two models.

36 MATERIALS SCIENCE↗

NO-assisted molecular-beam epitaxial growth of nitrogen substituted EuO

We have investigated a method for substituting oxygen with nitrogen in EuO thin films, which is based on molecular beam epitaxy distillation with NO gas as the oxidizer. By varying the NO gas pressure, we produce crystalline, epitaxial EuO{sub 1-x}N{sub x} films with good control over the films' nitrogen concentration. In situ x-ray photoemission spectroscopy reveals that nitrogen substitution is connected to the formation Eu{sup 3+}4f{sup 6} and a corresponding decrease in the number of Eu{sup 2+}4f{sup 7}, indicating that nitrogen is being incorporated in its 3{sup -} oxidation state. While small amounts of Eu{sup 3+} in over-oxidized Eu{sub 1-{delta}}O thin films lead to a drastic suppression of the ferromagnetism, the formation of Eu{sup 3+} in EuO{sub 1-x}N{sub x} still allows the ferromagnetic phase to exist with an unaffected T{sub c}, thus providing an ideal model system to study the interplay between the magnetic f{sup 7} (J = 7/2) and the non-magnetic f{sup 6} (J = 0) states close to the Fermi level.

36 MATERIALS SCIENCE↗

Influence of a TiO{sub 2} buffer layer on the magnetic properties of anatase Co:TiO{sub 2} thin films

Our study addresses the influence of a TiO{sub 2} buffer layer on the morphological, structural, and magnetic properties of Co:TiO{sub 2} films grown on (001) SrTiO{sub 3} substrates by RF sputtering. We demonstrate that a direct correlation exist between the morphology, the Co heterogeneity, and the magnetic properties measured in the films. Correlated analysis by cross section transmission electron microscopy, energy dispersive x-ray, and x-ray photoemission spectroscopy reveals that the Co is not uniformly distributed in the film but concentrated in the surface clusters. Atomic force microscopy analysis illustrates that the unbuffered films present a large density of surface clusters. These clusters are not metallic Co but Co rich TiO{sub 2} anatase phase and they are accompanied by structural defects in the film: dislocations, small angle grain boundaries. Magnetometry analysis shows that the unbuffered films have a net ferromagnetic behavior, while in the buffered ones the ferromagnetism is quenched. Therefore, we conclude that the magnetism in unbuffered samples is related to the surface clusters and seems to have an extrinsic nature.

36 MATERIALS SCIENCE↗

Observation of UV-induced Auger features in catechol adsorbed on anatase TiO{sub 2} (101) single crystal surface

We have investigated the electronic structure of catechol adsorbed on the anatase TiO{sub 2} (101) surface under illumination with ultraviolet (UV) light (4.75 eV) using resonant photoemission spectroscopy. UV illumination results in the appearance of a strong Ti MVV (M refers to photoionization of 3p level and VV the Auger decay process via the valence levels) feature at a kinetic energy of 26.2 eV. This is attributed to the creation of localised states following catechol to Ti-3d excitation by the UV source. A sharp resonance attributed to excitation from Ti 3p states into these localised states is observed in constant final state spectra.

36 MATERIALS SCIENCE↗

Structural characterization and electronic structure of laser treated TiN thin film

TiN thin films prepared by laser treatment using Kr-F excimer laser in the controlled atmosphere. The depth distribution and composition of nitrogen and contaminated oxygen have been determined by non-Rutherford proton backscattering using 1.7 MeV Tendetron accelerator. The electronic structure of TiN thin film have been characterized by resonant photoelectron spectroscopy using indus-I synchrotron radiation. Specifically, complex resonance profile that shows the enhancement at 45 eV which is consistent with the resonant photoemission of Ti 3d states involved in the Titanium nitride and oxide.

36 MATERIALS SCIENCE↗

Active spectroscopic measurements of the bulk deuterium properties in the DIII-D tokamak (invited)

The neutral-beam induced D{sub {alpha}} emission spectrum contains a wealth of information such as deuterium ion temperature, toroidal rotation, density, beam emission intensity, beam neutral density, and local magnetic field strength magnitude Double-Vertical-Line B Double-Vertical-Line from the Stark-split beam emission spectrum, and fast-ion D{sub {alpha}} emission (FIDA) proportional to the beam-injected fast ion density. A comprehensive spectral fitting routine which accounts for all photoemission processes is employed for the spectral analysis. Interpretation of the measurements to determine physically relevant plasma parameters is assisted by the use of an optimized viewing geometry and forward modeling of the emission spectra using a Monte-Carlo 3D simulation code.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interfacial electronic properties of the heterojunctions C{sub 60}/rubrene/Au and rubrene/C{sub 60}/Au

Using synchrotron-radiation photoemission, we have studied the electronic structures of rubrene:C{sub 60} heterojunctions on Au substrates. The photoelectron spectra show that the interfacial properties at the C{sub 60}/rubrene/Au and rubrene/C{sub 60}/Au interfaces are asymmetric and do not follow the commutation rule. In the C{sub 60}/rubrene case, a gap state appearing in the initial deposition stage results from negative charges transferred from rubrene to C{sub 60}, while in the inverse deposition process, no strong chemical reaction could be found. A significant shift of the vacuum level induced by alignment of the charge neutrality levels of the two materials was observed in both cases. Furthermore, the charge transfer strongly enhances the dipole potential of the C{sub 60}/rubrene interface. The energy level diagrams show that the C{sub 60}-on-rubrene process has a superior number of advantages in the photovoltaic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the interfacial hole injection barrier between p-type organic materials and Co using a MoO{sub 3} buffer layer

We demonstrate that the interfacial hole injection barrier {Delta}{sub h} between p-type organic materials (i.e., CuPc and pentacene) and Co substrate can be tuned by the insertion of a MoO{sub 3} buffer layer. Using ultraviolet photoemission spectroscopy, it was found that the introduction of MoO{sub 3} buffer layer effectively reduces the hole injection barrier from 0.8 eV to 0.4 eV for the CuPc/Co interface, and from 1.0 eV to 0.4 eV for the pentacene/Co interface, respectively. In addition, by varying the thickness of the buffer, the tuning effect of {Delta}{sub h} is shown to be independent of the thickness of MoO{sub 3} interlayer at both CuPc/Co and pentacene/Co interfaces. This Fermi level pinning effect can be explained by the integer charge-transfer model. Therefore, the MoO{sub 3} buffer layer has the potential to be applied in p-type organic spin valve devices to improve the device performance via reducing the interfacial hole injection barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma stabilisation of metallic nanoparticles on silicon for the growth of carbon nanotubes

Ammonia (NH{sub 3}) plasma pretreatment is used to form and temporarily reduce the mobility of Ni, Co, or Fe nanoparticles on boron-doped mono- and poly-crystalline silicon. X-ray photoemission spectroscopy proves that NH{sub 3} plasma nitrides the Si supports during nanoparticle formation which prevents excessive nanoparticle sintering/diffusion into the bulk of Si during carbon nanotube growth by chemical vapour deposition. The nitridation of Si thus leads to nanotube vertical alignment and the growth of nanotube forests by root growth mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Room temperature ferroelectric and magnetic investigations and detailed phase analysis of Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films

Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} (BTF7C3O) thin films on {alpha}-quartz substrates were fabricated by a chemical solution deposition method and the room temperature ferroelectric and magnetic properties of this candidate multiferroic were compared with those of thin films of Mn{sup 3+} substituted, Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Mn{sub 0.3}O{sub 15} (BTF7M3O). Vertical and lateral piezoresponse force microscopy (PFM) measurements of the films conclusively demonstrate that BTF7C3O and BTF7M3O thin films are piezoelectric and ferroelectric at room temperature, with the major polarization vector in the lateral plane of the films. No net magnetization was observed for the in-plane superconducting quantum interference device (SQUID) magnetometry measurements of BTF7M3O thin films. In contrast, SQUID measurements of the BTF7C3O films clearly demonstrated ferromagnetic behavior, with a remanent magnetization, B{sub r}, of 6.37 emu/cm{sup 3} (or 804 memu/g), remanent moment = 4.99 Multiplication-Sign 10{sup -5} emu. The BTF7C3O films were scrutinized by x-ray diffraction, high resolution transmission electron microscopy, scanning transmission electron microscopy, and energy dispersive x-ray analysis mapping to assess the prospect of the observed multiferroic properties being intrinsic to the main phase. The results of extensive micro-structural phase analysis demonstrated that the BTF7C3O films comprised of a 3.95% Fe/Co-rich spinel phase, likely CoFe{sub 2-x}Ti{sub x}O{sub 4}, which would account for the observed magnetic moment in the films. Additionally, x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) imaging confirmed that the majority of magnetic response arises from the Fe sites of Fe/Co-rich spinel phase inclusions. While the magnetic contribution from the main phase could not be determined by the XMCD-PEEM images, these data however imply that the Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films are likely not single phase multiferroics at room temperature. The PFM results presented demonstrate that the naturally 2D nanostructured Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} phase is a novel ferroelectric and has potential commercial applications in high temperature piezoelectric and ferroelectric memory technologies. The implications for the conclusive demonstration of ferroelectric and ferromagnetic properties in single-phase materials of this type are discussed.

36 MATERIALS SCIENCE↗

Photoexcitation of adsorbates on metal surfaces: One-step or three-step

In this essay we discuss the light-matter interactions at molecule-covered metal surfaces that initiate surface photochemistry. The hot-electron mechanism for surface photochemistry, whereby the absorption of light by a metal surface creates an electron-hole pair, and the hot electron scatters through an unoccupied resonance of adsorbate to initiate nuclear dynamics leading to photochemistry, has become widely accepted. Yet, ultrafast spectroscopic measurements of molecule-surface electronic structure and photoexcitation dynamics provide scant support for the hot electron mechanism. Instead, in most cases the adsorbate resonances are excited through photoinduced substrate-to-adsorbate charge transfer. Based on recent studies of the role of coherence in adsorbate photoexcitation, as measured by the optical phase and momentum resolved two-photon photoemission measurements, we examine critically the hot electron mechanism, and propose an alternative description based on direct charge transfer of electrons from the substrate to adsorbate. The advantage of this more quantum mechanically rigorous description is that it informs how material properties of the substrate and adsorbate, as well as their interaction, influence the frequency dependent probability of photoexcitation and ultimately how light can be used to probe and control surface femtochemistry.

36 MATERIALS SCIENCE↗

Comparative band alignment of plasma-enhanced atomic layer deposited high-k dielectrics on gallium nitride

Al{sub 2}O{sub 3} films, HfO{sub 2} films, and HfO{sub 2}/Al{sub 2}O{sub 3} stacked structures were deposited on n-type, Ga-face, GaN wafers using plasma-enhanced atomic layer deposition (PEALD). The wafers were first treated with a wet-chemical clean to remove organics and an in-situ combined H{sub 2}/N{sub 2} plasma at 650 Degree-Sign C to remove residual carbon contamination, resulting in a clean, oxygen-terminated surface. This cleaning process produced slightly upward band bending of 0.1 eV. Additional 650 Degree-Sign C annealing after plasma cleaning increased the upward band bending by 0.2 eV. After the initial clean, high-k oxide films were deposited using oxygen PEALD at 140 Degree-Sign C. The valence band and conduction band offsets (VBOs and CBOs) of the Al{sub 2}O{sub 3}/GaN and HfO{sub 2}/GaN structures were deduced from in-situ x-ray and ultraviolet photoemission spectroscopy (XPS and UPS). The valence band offsets were determined to be 1.8 and 1.4 eV, while the deduced conduction band offsets were 1.3 and 1.0 eV, respectively. These values are compared with the theoretical calculations based on the electron affinity model and charge neutrality level model. Moreover, subsequent annealing had little effect on these offsets; however, the GaN band bending did change depending on the annealing and processing. An Al{sub 2}O{sub 3} layer was investigated as an interfacial passivation layer (IPL), which, as results suggest, may lead to improved stability, performance, and reliability of HfO{sub 2}/IPL/GaN structures. The VBOs were {approx}0.1 and 1.3 eV, while the deduced CBOs were 0.6 and 1.1 eV for HfO{sub 2} with respect to Al{sub 2}O{sub 3} and GaN, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure and magnetic properties of Ni-doped AlN films

We report the crystal structure and magnetic properties of Al{sub 1-x}Ni{sub x}N films with 0 {<=} x {<=} 0.032 deposited on Si (100) substrates by radio frequency reactive sputtering. X-ray diffractometry, x-ray photoemission spectroscopy, and x-ray absorption fine structure analysis clearly showed that Ni atoms were successfully incorporated into AlN, while the crystal structure of the films was maintained. All the doped samples exhibited ferromagnetism both at 5 K and 300 K. The saturation magnetizations (M{sub s}) and coercive fields (H{sub c}) tended to decrease as Ni concentration increased from 0.019 to 0.032, the maximum M{sub s} obtained at 5 K and 300 K were about 0.025 and 0.014 emu/g, respectively, and the corresponding H{sub c} were 208 and 60 Oe. Temperature dependence of remanent magnetization showed that the ferromagnetic transition temperature was beyond 300 K.

36 MATERIALS SCIENCE↗

Interplay between intrinsic and stacking-fault magnetic domains in bi-layered manganites

We present a low temperature X-ray photoemission electron microscopy study of the bi-layered manganite compound La{sub 1.2}Sr{sub 1.8}Mn{sub 2}O{sub 7} (BL-LSMO) to investigate the influence of stacking faults, which are structurally and magnetically different from the bi-layered host. In BL-LSMO small magnetic moment persists to T* = 300K, well above the Curie temperature of 120K (T{sub C}). Our magnetic images show that 3D stacking faults are responsible for the T* transition. Furthermore, close to the T{sub C}, stacking faults are well coupled to the bi-layered host with latter magnetic domains controlling the spin direction of the stacking faults. Contrary to recent reports, we find that stacking faults do not seed magnetic domains in the host via an exchange spring mechanism and the intrinsic T{sub C} of the BL-LSMO is not lower than 120K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗