Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Electrical, thermal and electrochemical properties of disordered carbon prepared from palygorskite and cane molasses

We have synthesized and electrochemically tested a carbon sample that was suitable as anode for lithium secondary battery. The synthesis was based on the use of the palygorskite clay as template and sugar cane molasses as carbon source. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, Brunauer–Emmett–Teller (BET) measurements and High Resolution Transmission Electron Microscope (HRTEM) analysis showed that the nanometric carbon material has a highly disordered graphene-like wrinkled structure and large specific surface area (467 m{sup 2} g{sup −1}). The compositional characterization revealed a 14% of heteroatoms-containing groups (O, H, N, S) doping the as-prepared carbon. Thermophysical measurements revealed the good thermal stability and an acceptable thermal diffusivity (9·10{sup −7} m{sup 2} s{sup −1}) and conductivity (1.1 W m{sup −1} K{sup −1}) of this carbon. The electrical properties showed an electronic conductivity of hole-like carriers of approximately one S/cm in a 173–293 K range. The testing of this material as anodes in a secondary lithium battery displayed a high specific capacity and excellent performance in terms of number of cycles. A high reversible capacity of 356 mA h g{sup −1} was reached. - Graphical abstract: TEM image and electrochemistry behavior of a new graphene oxide-like carbon. - Highlights: • A high disordered graphene oxide-like conducting carbon is reported. • The synthesis was based on palygorskite and sugar cane molasses as precursors. • The disordered conducting carbon is composed of doped- graphene heterogeneous domains. • This material combines a large specific surface area and high electric conductivity. • The thermophysical and electrochemical properties of this material reveal adequate behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex behavior of the Pd 7 cluster supported on TiO 2 (110) during CO oxidation: adsorbate-driven promoting effect

When using the TiO 2 (110)-supported Pd7 cluster as a model catalyst, we identified the dynamics of supported metal nanoparticles using density functional theory calculations, at the sub-nanometer scale and under reactive environments. Increasing the CO coverage can induce a structural transformation from Pd 7 -3D/TiO 2 (110) at low coverage to Pd 7 -2D/TiO 2 (110) at the saturation coverage wherein CO saturation-driven Pd7-2D/TiO 2 (110) structure displays superior CO oxidation activity at the interfacial sites, which are highly active for catalyzing O 2 dissociation and CO oxidation via bifunctional synergy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase and photoelectrochemical behavior of solution-processed Fe{sub 2}O{sub 3} nanocrystals for oxidation of water under solar light

Monodispersed iron-oxide nanocrystals of controlled sizes (5-16 nm) were prepared by the thermal decomposition of iron-oleate complex to fabricate photoanode films for photoelectrochemical oxidation of water under simulated solar light. The smallest 5 nm particles were made mostly of {gamma}-Fe{sub 2}O{sub 3}, but other sizes showed mixed phases with Fe{sub 3}O{sub 4}, whose fraction increased with size. Size-dependent photoanodic currents were also observed, showing maximum photocurrent density for 12 nm particles. The high photocurrents were attributed to the lowered electron-hole recombination rates for the nanocrystals with the sizes comparable to the hole diffusion length.

36 MATERIALS SCIENCE↗

Improving Corrosion Behavior in SCWR, LFR and VHTR Reactor Materials by Formation of a Stable Oxide

The objective of this study is to understand the influence of the alloy microstructure and composition on the formation of a stable, protective oxide in the environments relevant to the SCWR and LFR reactor concepts, as well as to the VHTR. It is proposed to use state-of-the art techniques to study the fine structure of these oxides to identify the structural differences between stable and unstable oxide layers. The techniques to be used are microbeam synchrotron radiation diffraction and fluorescence, and cross-sectional transmission electron microcopy on samples prepared using focused ion beam.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Viscous flow behavior of four iron-containing silicates with alumina, effects of composition and oxidation condition

The viscosity of a magma is an important parameter in connection with its effect on geologic processes such as melt segregation, magma vesiculation, and crystal fractionation. Though most models of geologic processes assume relatively low values for the magma viscosity less than 10,000 poise, it would be useful to have an empirical model for estimating viscosities when the process occurs during continuous cooling to a temperature region where the viscosity is expected to be very high. The considered work has been carried out to provide the experimental measurements of viscosity at low temperatures which would be used in formulating the empirical model. Ten iron-containing silicate compositions have been investigated by Klein et al. (1981), and four of these compositions have been selected for the present study with alumina. The study involves substitutions of Al2O3 for FeOx at Na2O/Al2O3 moles greater than one. For the four iron-containing silicate glasses with alumina, the viscosity at a given temperature is found to increase with increasing (Fe + Al).

Klein, L. C.↗

Systematic Insight into Chloride Concentration, Applied Potential and Time Effect on the Passive Film of Cu-Zn-Ni Ternary Alloy in Alkaline Solution

The effects of chloride concentration, applied potential and time on the passive film of Cu-Zn-Ni ternary alloy in alkaline solution were systematically investigated using potentiodynamic and potentiostatic polarizations, electrochemical impedance spectroscopy, Mott–Schottky analysis, laser confocal microscopy, atomic force microscopy and x-ray photoelectron spectroscopy. Results showed that the pitting potential decreased as a linear function of log(a{sub Cl{sup −}}), and the size of pits extended faster in the horizontal direction than in the vertical direction. The passive oxide film formed on Cu-Zn-Ni alloy mainly exhibited p-type semiconductor behavior, which was consistent with cuprous and nickel oxide, the main components in the film. The density of cation vacancy (approximately 10{sup 20}-10{sup 21} cm{sup −3}) increased with potentiostatic time but reduced by the increasing potentials. The kinetics of passive film growth followed a parabolic law D = m * t{sup n}, where m is a constant considered as the initial growth rate and n is the time exponent. Subsequent to the formation of a compact and coherent passive film at higher potential, it was hard for an ion to migrate or for an aggressive ion to penetrate, which indicated better corrosion resistance for passive film formed under higher potential.

36 MATERIALS SCIENCE↗

Ti{sub x}Si{sub 1-x}O{sub 2} optical coatings with tunable index and their response to intense subpicosecond laser pulse irradiation

Ion-beam sputtered Ti{sub x}Si{sub 1-x}O{sub 2} binary-oxide films of high optical quality with tunable bandgap and refractive index were produced using zone targets. The suitability of the films for high-power subpicosecond laser applications is explored by laser breakdown measurements. The observed scaling laws of the single-pulse breakdown threshold--a power law with respect to pulse duration and a linear law with respect to bandgap energy--are similar to results obtained with high-quality simple oxides. The single- and multiple-pulse breakdown behaviors of these binary films indicate only slightly larger defect densities than found in simple oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Comparison of Solidification Structures and Submicroscale Cellular Segregation in Rapidly Solidified Stainless Steels Produced via Two-Piston Splat Quenching and Laser Powder Bed Fusion

Fusion-based additive manufacturing techniques leverage rapid solidification (RS) conditions to create parts with complex geometries, unique microscale/nanoscale morphological features, and elemental segregation. Three custom composition stainless steel alloys with varying chromium equivalence to nickel equivalence ratio (Cr eq /Ni eq ) between 1.53 and 1.95 were processed using laser powder bed fusion (LPBF) and/or two-piston splat quenching (SQ) to produce solidification rates estimated between 0.4 and 0.8 m/s. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to collect high-resolution images, electron backscatter diffraction (EBSD) phase identification, and measure cellular segregation. Similar features were observed in both LPBF and SQ samples including phase and microstructure, nanoscale oxide particles, cell size, and segregation behavior. However, dislocation pileup was observed along the cell boundaries only in the LPBF austenite solidified microstructure. Targeted adjustment of the SQ feedstock Cr and Ni concentrations, within the ASTM A240 specification for 316L resulted in no observable impact on the cell size, oxide particle size, or magnitude of segregation. Also, the amount of Ni segregation in the ferrite solidified microstructures did not significantly differ, regardless of Cr/Ni eq or processing technique. Here, SQ is demonstrated as capable of simulating RS rates and microstructures similar to LPBF for use as an alternative screening tool for new RS alloy compositions.

42 ENGINEERING↗

Fabrication and accelerated long-term stability test of asymmetrical hollow fiber-supported thin film oxygen separation membrane

Asymmetrical hollow fiber-supported thin film membrane may provide microstructural advantages for air separation and oxygen production. The fabrication of such a membrane is usually very difficult, particularly the sintering behaviors and thermal expansion coefficient (TEC) mismatch among multiple layers. This directly affects the reliability and long-term stability of the membrane. Here, in this research, the sintering behaviors of a set of simple oxides are systematically studied and ZnO is identified as a material component for composite substrate La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF)-ZnO. The LSCF-ZnO ratios are further optimized by trading off several factors, e.g., matching the sintering behaviors and TECs of the LSCF-ZnO composite with those of LSCF thin film separation layer while enhancing the substrate strength. With the identified LSCF-ZnO ratio, the LSCF-ZnO composite hollow fiber substrate precursor is formed through slurry spinning process with porous microstructure being formed via phase inversion process. The thin film LSCF dense separation layer is then dip-coated on the substrate followed by co-sintering process. A thin, porous PrBaCo(Fe 0.6 Zr 0.2 Y 0.2 )O 5+δ (PBCFZY) catalyst layer is fabricated on the dense LSCF separation layer with dip-coating and sintering process, forming an asymmetrical membrane device LSCF-ZnO/LSCF/PBCFZY. Oxygen permeation test of the device is systematically conducted, and the fundamental mechanisms are analyzed. An accelerated long-term stability test of the membrane is also conducted (~550h, 46 thermal cycling loads), demonstrating excellent robustness and durability. The device is characterized and analyzed before and after the test. By replacing a considerable amount of high cost LSCF with low cost ZnO in the substrate, it not only enhances the stability but also reduces the capital cost of the membrane for practical applications.

42 ENGINEERING↗

Synthesis of zinc oxide particles coated multiwalled carbon nanotubes: Dielectric properties, electromagnetic interference shielding and microwave absorption

Graphical abstract: A resistor–capacitor model could well describe the relationships between the structure and the dielectric properties, electromagnetic interference shielding and microwave-absorption of the composites in the frequency range of 2–18 GHz. The resonant behavior associated with the multiwalled carbon nanotubes/zinc oxide (MWCNTs/ZnO) interface greatly broadens the absorption band. Highlights: ► ZnO-immobilized on multiwalled carbon nanotubes (MWCNTs/ZnO) have resonant behavior. ► A resistor–capacitor model describes the relation between the structure and properties. ► The composite with 40 wt% MWCNTs/ZnO has good electromagnetic interference shielding. ► Two different types of absorption peaks are found in the MWCNTs/ZnO composites. ► The existence of MWCNTs/ZnO interface broadens the absorption band. -- Abstract: Zinc oxide (ZnO) nanoparticles were coated on the surfaces of multiwalled carbon nanotubes (MWCNTs). High resolution transmission electron microscopy images show that the wurtzite ZnO immobilized on the MWCNTs is single-crystalline with a preferential [0 0 0 2] growth direction. A capacitor was generated by the interface of ZnO and MWCNTs, and a resistor–capacitor model could well describe the relationships between the structure and the dielectric properties, electromagnetic interference shielding and microwave-absorption of the composites in the frequency range of 2–18 GHz. The network built by ZnO-immobilized MWCNTs could contribute to the improvement of electrical properties. Resonant peaks associated with the capacitor formed by the interface were observed in the microwave absorption spectra, which suggest that reflection–loss peaks greatly broadens the absorption bandwidth.

36 MATERIALS SCIENCE↗

Synergy between Ceria Oxygen Vacancies and Cu Nanoparticles Facilitates the Catalytic Conversion of CO 2 to CO under Mild Conditions

The performance of supported metal catalysts can depend on many factors, including metal particle size and dispersion and metal–support interactions, and differentiation of these effects is challenging because of their interwoven relationship. Copper/ceria catalysts are well-known redox catalysts studied in the conversion of CO and CO 2 via oxidation and/or reduction pathways. The redox behaviors of each species, Cu-CuO and CeO x -CeO 2 , are often suggested to be interlinked, allowing ceria-supported copper domains to outperform copper species on other, nonredox active supports. In this work, the catalytic activity of nanosized Cu supported on either cerium oxide or mesoporous silica is explored using samples where the Cu weight loading, particle size, and dispersion of Cu are held constant to highlight the impact of the two supports on catalytic performance without additional influencing factors. The Cu/CeO 2 catalysts are synthesized via a space-confined method to limit the growth of CeO 2 particles and to achieve a high dispersion of Cu. Through in situ XRD and XAS, it is shown that the presence of Cu nanoparticles on the CeO 2 support lowers the reduction temperature of CeO 2 , allowing formation of oxygen vacancies at low temperatures <300 °C. The Cu/CeO x catalyst demonstrates 100% CO selectivity in the low temperature (300 °C) and ambient pressure conversion of CO 2 to CO, even when approaching equilibrium conversion. Moreover, this catalyst is approximately 4 times more active than the corresponding Cu/SiO 2 catalyst with otherwise similar structural attributes. The potential reaction pathways are probed by in situ FTIR and in situ XAS at various temperatures, identifying Cu + -CO species and oxygen vacancies forming under some conditions. The collected experimental evidence also suggests a reaction sequence for CO 2 hydrogenation over Cu/CeO x catalysts, consistent with DFT reports in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the Voltage Decay Phenomenon in Li-Rich Layered Oxide Cathode of No Oxygen Activity

Extensive efforts have been devoted to unraveling the true cause of voltage decay in Li, Mn-rich layered oxides. An initial consensus was reached on structural rearrangement, then leaned towards the newly discovered lattice oxygen activity. It is challenging to differentiate their explicit roles because these events typically co-exist during the electrochemical reaction of most Li-rich layered oxides. Here, we probe the voltage decay behavior in Li 1.2 Ni 0.2 Ru 0.6 O 2 , a structurally and electrochemically relevant compound to Li, Mn-rich layered oxide, but of no oxygen activity. Such intriguing characteristics allow us to explicitly decouple the contribution of transition metal migration and lattice oxygen activity to voltage decay in Li-rich layered oxides. Our results demonstrate that the microstructural evolution, mainly originating from transition metal migration, is a direct cause of voltage decay, and lattice oxygen activity likely accelerates the decay.

25 ENERGY STORAGE↗

Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics

Vapor condensation is routinely used as an effective means of transferring heat, with dropwise condensation exhibiting a 5 − 7x heat transfer improvement compared to filmwise condensation. However, state-of-the-art techniques to promote dropwise condensation rely on functional hydrophobic coatings, which are often not robust and therefore undesirable for industrial implementation. Natural surface contamination due to hydrocarbon adsorption, particularly on noble metals, has been explored as an alternative approach to realize stable dropwise condensing surfaces. While noble metals are prohibitively expensive, the recent discovery of robust rare earth oxide (REO) hydrophobicity has generated interest for dropwise condensation applications due to material costs approaching 1% of gold; however, the underlying mechanism of REO hydrophobicity remains under debate. In this work, we show through careful experiments and modeling that REO hydrophobicity occurs due to the same hydrocarbon adsorption mechanism seen previously on noble metals. To investigate adsorption dynamics, we studied holmia and ceria REOs, along with control samples of gold and silica, via X-Ray photoelectron spectroscopy (XPS) and dynamic time-resolved contact angle measurements. The contact angle and surface carbon percent started at ≈0 on in-situ argon-plasma-cleaned samples and increased asymptotically over time after exposure to laboratory air, with the rare earth oxides displaying hydrophobic (>90°) advancing contact angle behavior at long times (>4 days). The results indicate that REOs are in fact hydrophilic when clean and become hydrophobic due to hydrocarbon adsorption. Furthermore, this study provides insight into how REOs can be used to promote stable dropwise condensation, which is important for the development of enhanced phase change surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Behavior of soda-lime silicate glass under laser-driven shock compression up to 315 GPa

Shock experiments give a unique insight into the behavior of matter subjected to extremely high pressures and temperatures. Understanding the behavior of materials under such extreme conditions is key to modeling material failure and deformation dynamics under impact. While studies on pure silica are extensive, the shock behavior of other commercial silicates that contain additional oxides has not been systematically investigated. To better understand the role of composition in the dynamic behavior of silicates, we performed laser-driven dynamic compression experiments on soda-lime glass (SLG) up to 315 GPa. Using the accurate pulse shaping offered by the long pulse laser system at the Matter in Extreme Conditions end-station at the Linac Coherent Light Source, SLG was shock compressed along the Hugoniot to multiple pressure-temperature points. Velocity Interferometer System for Any Reflector was used to measure the velocity and determine the pressure inside the SLG. The U s –u p relationship obtained agrees well with the previous parallel plate impact studies. Within the error bars, no transformation to the crystalline phase was observed up to 70 GPa, which is in contrast to the behavior of pure silica under shock compression. Our studies show that the glass composition strongly influences the shock compression behavior of the silicate glasses.

36 MATERIALS SCIENCE↗

Study of the effects of gaseous environments on sulfidation attack of superalloys

Studies were conducted to examine the effect of the gaseous corrodents NaCl, HCl, and NaOH on the high temperature oxidation and Na2SO4-induced corrosion behavior of the alumina former NiAl, the chromia former Ni-25 wt.% Cr, elemental Cr, and the superalloy B-1900. Experiments were conducted at 900 and 1050 C in air in the presence and absence of the gaseous corrodents. Effects involving both reaction rates and microstructural changes in oxide morphology were observed due to the presence of these corrodents at levels anticipated to be present in operating industrial and marine gas turbines. The effect of gaseous NaCl, HCl, and possibly NaOH on NiAl in simple oxidation was to remove aluminum from below the protective alumina layer and to simultaneously weaken the adherence of the protective alumina oxide scale to the substrate. The aluminum removed from below the oxide scale was redeposited on its surface as alpha-Al2O3 whiskers. With respect to the chromia formers, gaseous NaCl and HCl promoted breakaway oxidation kinetics and changes in the microstructures of the oxide scales.

Smeggil, J. G.↗