Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic LEDs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hybrid Molecular Beam Epitaxy for Single-Crystalline Oxide Membranes with Binary Oxide Sacrificial Layers

The advancement in thin-film exfoliation for synthesizing oxide membranes has led to possibilities for creating artificially assembled heterostructures with structurally and chemically incompatible materials. The sacrificial layer method is a promising approach to exfoliate as-grown films from a compatible material system, allowing for their integration with dissimilar materials. Nonetheless, the conventional sacrificial layers often possess an intricate stoichiometry, thereby constraining their practicality and adaptability, particularly when considering techniques such as molecular beam epitaxy (MBE). This is where easy-to-grow binary alkaline-earth-metal oxides with a rock salt crystal structure are useful. These oxides, which include (Mg, Ca, Sr, Ba)O, can be used as a sacrificial layer covering a much broader range of lattice parameters compared to conventional sacrificial layers and are easily dissolvable in deionized water. In this study, we show the epitaxial growth of the single-crystalline perovskite SrTiO 3 (STO) on sacrificial layers consisting of crystalline SrO, BaO, and Ba 1–x Ca x O films, employing a hybrid MBE method. Our results highlight the rapid (≤5 min) dissolution of the sacrificial layer when immersed in deionized water, facilitating the fabrication of millimeter-sized STO membranes. Using high-resolution X-ray diffraction, atomic-force microscopy, scanning transmission electron microscopy, impedance spectroscopy, and scattering-type near-field optical microscopy (SNOM), we demonstrate single-crystalline STO membranes with bulk-like intrinsic dielectric properties. The employment of alkaline earth metal oxides as sacrificial layers is likely to simplify membrane synthesis, particularly with MBE, thus expanding the research and application possibilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lithium calix[4]arenes: structural studies and use in the ring opening polymerization of cyclic esters

We have structurally characterized a number of lithiated calix[4]arenes, where the bridge in the calix[4]arene is thia (–S–, L S H 4 ), sulfinyl (–SO–, L SO H 4 ), sulfonyl (–SO 2 –, L SO2 H 4 ), dimethyleneoxa (–CH 2 OCH 2 –, L COC H 4 ) or methylene (–CH 2 –, LH 4 ). In the case of L 4S H 4 , interaction with LiO t Bu led to the isolation of the complex [Li 8 (L 4S ) 2 (THF) 4 ]·5THF ( 1 ·5THF), whilst similar interaction of L 4SO H 4 led to the isolation of [Li 6 (L 4SO H) 2 (THF) 2 ]·5(THF) ( 2 ·5THF). Interestingly, the mixed sulfinyl/sulfonyl complexes [Li 8 (calix[4]arene(SO)(SO 2 )(SO 1.68 ) 2 ) 2 (THF) 6 ]·8(THF) ( 3 ·8THF) and [Li 5 Na(L SO/3SO2 H) 2 (THF) 5 ]·7.5(THF) ( 4 ·7.5(THF) have also been characterized. Interaction of LiO t Bu with L SO2 H 4 and L COC H 4 afforded [Li 5 L 4SO2 (OH)(THF) 4 ]·2THF ( 5 ·2THF) and [Li 6 (L COC ) 2 (HO t Bu) 2 ]·0.78THF·1.22hexane ( 6 ·0.78THF·1.22hexane), respectively. In the case of LH 4 , reaction with LiO t Bu in THF afforded a monoclinic polymorph [LH 2 Li 2 (thf)(OH 2 ) 2 ]·3THF ( 7 ·3THF) of a known triclinic form of the complex, whilst reaction of the de-butylated analogue of LH 4 , namely de-BuLH 4 , afforded a polymeric chain structure {[Li 5 (de-BuL)(OH)(NCMe) 3 ]·2MeCN} n ( 8 ·2MeCN). For comparative catalytic studies, the complex [Li 6 (L Pr ) 2 (H 2 O) 2 ]·hexane ( 9 hexane), where L Pr2 H 2 = 1,3-di- n -propyloxycalix[4]areneH 2 , was also prepared. The molecular crystal structures of 1–9 are reported, and their ability to act as catalysts for the ring opening (co-)/polymerization (ROP) of the cyclic esters ε-caprolactone, δ-valerolactone, and rac -lactide has been investigated. In most of the cases, complex 6 outperformed the other systems, allowing for higher conversions and/or greated polymer M n .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Signatures of aerosol-cloud interactions in GiOcean: a coupled global reanalysis with two-moment cloud microphysics

Aerosols influence the Earth's radiative balance through direct interactions with radiation and by affecting cloud properties. Anthropogenic aerosols have led to cooling during the industrial era through aerosol–cloud interactions (ACI), including aerosol effects on cloud microphysical properties and the subsequent adjustments. However, large uncertainties remain in Earth system models (ESMs) regarding the magnitude of this cooling. In part, ESMs substantially disagree on cloud properties, thermodynamics, the hydrological cycle, and general circulation. Reanalysis provides a useful avenue for exploring the impact of ACI on clouds and radiation because its atmosphere is forced to match realistic conditions through the assimilation of observations. Here, we explore the impact of ACI on clouds in the GiOcean reanalysis – the first to incorporate aerosol-cloud interactions. We contrast variables important for ACI between GiOcean and satellite observations and develop 2-dimensional lookup tables of ACI for both using a source-sink budget perspective to attribute the changes in cloud droplet number (Nd) and liquid water path (LWP) to aerosol and meteorology. A compositing analysis using lookup tables shows that GiOcean captures key aspects of aerosol–cloud–precipitation interactions, including (1) activation of aerosol into cloud droplets, (2) effective precipitation scavenging of Nd, (3) suppression of precipitation by high Nd in regions with heavy aerosol emissions. In contrast, satellite observations do not exhibit clear patterns for processes (2) and (3). Random Forest analysis shows that interannual variability in Nd and LWP over the Northern Hemisphere ocean in GiOcean is primarily driven by precipitation, consistent with satellite observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improving Gas Reactor Design with Complex Non-Standard Reaction Mechanisms in a Reactive Flow Model

Fluorinated gases are critical to a number of high-technology industries including semiconductor manufacturing and related processes such as flat panel display, LED, and photovoltaic manufacturing. These fluorinated gases have very high global warming potentials (GWPs) and, unfortunately are chemically very stable, in some cases lasting for thousands of years in the atmosphere. For environmental reasons, it is imperative that the release of these gases be minimized, but existing methods to destroy them requires a significant amount of energy. The goal of this project was to develop a more energy efficient method of destroying these high GWP gases using computational fluid dynamics, but the computational requirements are significant. In this project, we bring together resources available at the national labs, including high-performance computing hardware and modern computational methods, in order to explore an industrially important problem with key environmental and economic impact. In this project, we examined the state-of-the-art models for the physical processes involved, and made subtle changes to arrive at alternative formulations considerably better suited for computation and study. We examined several representative scenarios and developed a set of analyses techniques and tools that could be used to explore the systems in much greater detail. This exploratory project has demonstrated to ALZETA that HPC can indeed provide a unique view into their complex engineering problem - one that is simply inaccessible by any other means. The tools allow us to explore the details of the chemical process, and allow one to construct "what-if" scenarios to address shortcomings of the physical device in its current operating modes. However, as with many sources of completely new information, many new questions are illuminated with this capability. It will take considerable time, effort and experience before we learn to probe the solutions, pose operating scenarios and confirm modifications to the device that lead to real engineering advances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancement of oxidative dehydrogenation over cerium-doped nickel niobium catalysts and analysis of batch-to-batch variability

Nickel based catalysts are inexpensive and efficient for use in the oxidative dehydrogenation of ethane. NiO doped with niobium and cerium shows increased ethylene production. Small amounts of Ce doped onto a NiNb catalyst led to increased Ni activity. The catalyst that had the highest ethylene production rate per g of catalyst had 1 atom% Ce, 86 at% Ni, and 13 at% Nb (1CeNiNb) while, if surface area is incorporated into the calculation, the catalyst that had the highest ethylene production rate per m 2 was the 0.5CeNiNb catalyst. The ethylene production rates of these Ce-containing catalysts are 27 %-127 % higher than those with NiNb alone previously reported in the literature. Here, to fully understand how cerium affects the NiNb catalyst, the Ce content and effect on active sites has been fully characterized over multiple batches. In doing this, light has been shed on batch-to-batch variability. Characterization techniques such as powder X-ray diffraction, hydrogen temperature programmed reduction, X-ray photoelectron spectroscopy, synchrotron X-ray absorption spectroscopy, and methanol adsorption were used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Activity and selectivity for CO 2 methanation of clusters and nanoplates of ruthenium dispersed on ceria: In-situ studies with XAFS and DRIFTS

The performance of Ru/CeO 2 catalysts under CO 2 hydrogenation conditions was studied using in situ X-ray absorption fine structure (XAFS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) to understand the structural evolution and chemical nature of each component under reaction conditions. The catalysts were prepared using a reverse microemulsion method that maximized the dispersion of RuOx particles on ceria. A RuO x → Ru transformation was observed upon exposure of the RuO x /CeO 2 systems to H 2 at 250 °C. For a sample with 5% molar Ru, two-dimensional clusters (2-4 atoms) of Ru formed on top of the ceria support. An increase in the loading of ruthenium to 20% molar led to the formation of nanoplates of the metal 2-3 atomic layers thick. Both Ru structures were highly dispersed on ceria. They were oxidized after exposure to CO 2 at 250 °C. However, under CO 2 /H 2 mixture, they remained in a metallic state as two-dimensional clusters and nanoplates. In situ DRIFTS studies, the 5% and 20% Ru/CeO 2 catalysts showed distinct reaction intermediates when exposed to CO 2 or CO 2 /H 2 (1/4) reaction mixtures. Normalized to the Ru molar percentage, the 5% Ru/CeO 2 system was the most active catalyst exhibiting a selectivity of ~ 60% CH 4 and 40% CO at 250 °C. On the other hand, under the same reaction conditions, the 20% Ru/CeO 2 system was less active but had a CH 4 selectivity close to 80%. In conclusion, these results highlight the importance of the structure of the metallic Ru particles as a factor that determines the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

40th Eastern Regional Photosynthesis Conference

Photosynthesis has shaped global biochemistry and geochemistry in its production of almost all atmospheric oxygen, and almost every electron that supports the processes of life on Earth was extracted from water by the light-dependent reactions, many of which were then used to fix carbon in the dark reactions. To humans, that fixed carbon is the originator of all fossil fuels and a critical step in conversion of solar photons to human-usable energy. The Eastern Regional Photosynthesis Conference (ERPC) serves as a forum for advancement of science in this field. As a regional-level conference, it specializes in providing developmental opportunities for early-career researchers from undergraduates to pre-tenure professors, as well as broadening the field in terms of participating scholars and research approaches to produce new interdisciplinary collaborations. Funding from the Department of Energy is used to mitigate registration and attendance costs for junior (non-PI) researchers. The ERPC is one of the three regional conferences in the field of photosynthesis research in the United States, alongside the Western Photosynthesis Conference (currently in California) and the Midwestern Photosynthesis Conference (Turkey Run, Indiana). A longstanding incubator for scientific discourse, discovery, and collaborations, this conference has spawned many collaborations which led to Department of Energy-funded projects and brought two full generations of scientists into the field. In 2023 the landmark 40th such conference was held at the Woods Hole Marine Biological Laboratory in Massachusetts. The conference was held April 14th-16th, 2023. The majority of the total attendees are traditionally undergraduates, graduate students, and postdoctoral researchers, whose scientific development greatly benefits from conferences like these. Almost all talks besides the ones given by invited speakers were given by young scientists who benefited from this award. Many posters presented at this conference were also the work of junior scientists. This conference is many young scientists' first exposure to the photosynthesis research community and its primary goal is to provide a positive atmosphere for those attendees, as exemplified by the three poster sessions and dedicated interactions between senior and junior scientists. Additionally, this was the first year of a successful equitable outreach and speaker recruitment plan to provide fair representation at the conference in line with Department of Energy policies and mission. The central focus of the ERPC is the understanding of energy flow from photons to usable chemical products in both natural and artificial photosynthesis. We support the DOE-BES aim of understanding of the biochemical/biophysical processes of photosynthesis to inform new technology development and field applications. This year’s theme, “Photosynthesis Across Scales,” reflected the scope of work being done from the individual exciton to the crop scale. This research encompasses applied biology, chemistry, physics, and materials engineering. The aim of this conference is to present new discoveries, techniques, and questions which can be sourced from any of these disciplines and provide an audience which is broadly qualified to use or respond to these developments.

08 HYDROGEN↗
DOE OSTI2025

Facile Solvent-Free Synthesis of Manganese Nickel-Layered Double Hydroxide for Sustainable Water-Splitting Applications

The quest for efficient and sustainable water-splitting electrocatalysts has led to the development of a novel bifunctional material, manganese nickel-layered double hydroxide (MnNi-LDH), which demonstrates promising performance for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Although manganese-based materials are less explored than other transition metals, they offer significant potential owing to their widespread availability, affordability, and customizable electronic characteristics. MnNi-LDH exhibits a nanosheet morphology and a layered structure, which collectively provide numerous accessible active sites and facilitate efficient charge transfer and mass transport. Characterization using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy, and transmission electron microscopy reveals the structural and compositional properties of MnNi-LDH. The oxidation states of Mn and Ni, as determined by XPS, play a crucial role in improving the catalytic activity. Notably, MnNi-LDH demonstrates low overpotentials of 187 mV for OER and 225 mV for HER at 10 mA/cm 2 current density comparable to conventional catalysts. Long-term stability tests show minimal degradation in cell performance over 50 h, with a current density drop of only 0.6153% per hour for the OER and 0.37% per hour for the HER. Further, these findings highlight the potential of MnNi-LDH as a promising and environmentally friendly bifunctional electrocatalyst for water splitting, contributing to the advancement of renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Radiometric Testing of Germicidal UV Products, Round 1: UV-C Towers and Whole-Room Luminaires (CALiPER Summary Report)

This summary report analyzes the independently tested performance of 13 germicidal ultraviolet (GUV) products purchased between February and July 2022. A companion full report provides additional information and discussion of the tested products, test methods, and results. The products were of three different types: • Seven portable, consumer-oriented GUV towers designed to be placed on the floor or a desk of an unoccupied room to disinfect air and surfaces. Five of these products used LED sources and two products used low-pressure mercury (LPM) sources. • One non-portable GUV whole-room luminaire designed to be installed on a ceiling to disinfect air when a room is occupied. This product used an LED source. • Five non-portable GUV troffer or high-bay style whole-room luminaires designed to be installed in or suspended from a ceiling to disinfect air and surfaces when a room is unoccupied. All five used LPM sources. Radiometric and electrical performance was evaluated for all 13 products. Photobiological safety was also assessed for two of the products because their documentation included testable claims. The test results were compared across products and to manufacturer or vendor claims. The testing identified many issues related to the accuracy of reported GUV product performance. Claims were often untestable, contradictory, ambiguous, or used incorrect units and/or terminology. And when claims were testable, they often did not match test results. For example, three products that claimed to emit UV-C emitted only UV-A. These product claim issues were more numerous with consumer-oriented tower products, but problems with accurate performance claims were found across all products. The UV-C radiant efficiency of the products varied widely, even among similar products using the same source technologies. For example, the UV-C radiant efficiency of LPM products varied by greater than a factor of three for the same product type, indicating a large potential energy savings opportunity for products that are better designed for efficiency. LED products had orders-of-magnitude lower UV-C radiant efficiency than LPM products. Several testing challenges and limitations were identified. Most significant among these is the capability to accurately test and report the performance of larger GUV products. Integrating spheres require a specialized and costly coating to test UV, and the testing laboratory for this round of products had only a 20-inch diameter hemisphere with this capability. Only 2 of the 10 UV-C emitting products could be tested in this sphere. Goniometer testing had a different size limitation in that mirrors typically used to increase goniometer test distance to the far field are not reflective of UV and therefore could not be used to increase test distance. As a result, 7 of 13 products could not be tested far field. The implication is that electronic files of UV-C intensity data typically imported into design software for designing GUV applications may not be reliable for predicting irradiance at arbitrary far-field distances. It is currently unclear if these are industry-wide testing laboratory limitations, and what solutions may exist to address them. Specifiers and buyers of GUV products will need accurate performance claims and data to safely and effectively deploy GUV technology to reduce the transmission of diseases in buildings. This CALiPER GUV Round 1 report demonstrates the significant education and training that is needed for manufacturers and vendors to accurately test and report the performance of their GUV products. Further standards and guidelines are needed to improve test methods, address testing limitations, and improve reporting of product performance. Additionally, the wide range in UV-C radiant efficiency of GUV products means there is a large energy-savings opportunity for more energy efficient GUV products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Emissive Colloidal GaAs Quantum Dots

Colloidal quantum dots offer tunable optical properties for optoelectronic applications, but the synthesis of high-quality III–V quantum dots (QDs) other than indium pnictides, and particularly GaAs, has remained elusive due to synthetic challenges. Colloidal GaAs QDs have been reported very recently and have shown only weak band-edge photoluminescence. Here, we demonstrate a large-scale synthesis of colloidal GaAs QDs in molten salts, followed by a high-temperature surface treatment with K 2 S, which removes native oxide and enables uniform zinc chalcogenide shell growth on GaAs. These QDs demonstrate bright band-edge photoluminescence and electroluminescence in QD LED devices. Low-temperature spectroscopy reveals a well-resolved exciton fine structure with distinct bright-state splitting and temperature-independent decay dynamics from 4 to 100 K. These results establish a practical pathway for the preparation of high-quality colloidal GaAs QDs from molten salts with potential applications in quantum technologies and optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Random heteropolymers as enzyme mimics

Despite successes in replicating the primary–secondary–tertiary structure hierarchy of protein, it remains elusive to synthetically materialize protein functions that are deeply rooted in their chemical, structural and dynamic heterogeneities. We propose that for polymers with backbone chemistries different from that of proteins, programming spatial and temporal projections of sidechains at the segmental level can be effective in replicating protein behaviours; and leveraging the rotational freedom of polymer can mitigate deficiencies in monomeric sequence specificity and achieve behaviour uniformity at the ensemble level. Here, guided by the active site analysis of about 1,300 metalloproteins, we design random heteropolymers (RHPs) as enzyme mimics based on one-pot synthesis. We introduce key monomers as the equivalents of the functional residues of protein and statistically modulate the chemical characteristics of key monomer-containing segments, such as segmental hydrophobicity. The resultant RHPs form pseudo-active sites that provide key monomers with protein-like microenvironments, co-localize substrates with catalytic or cofactor-binding sidechains and catalyse reactions such as oxidation and cyclization of citronellal with isopulegol/menthoglycol selectivity. This RHP design led to enzyme-like materials that can retain catalytic activity under non-biological conditions, are compatible with scalable processing and have expanded substrate scope, including environmentally long-lasting antibiotic tetracycline.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of Solid State Roadway Lighting on Melatonin in Humans

Introduction: In 2009, the World Health Organization identified vehicle crashes, both injury-related and fatal, as a public health hazard. Roadway lighting has long been used to reduce crashes and improve the safety of all road users. Ocular light exposure at night can suppress melatonin levels in humans. At sufficient light levels, all visible light wavelengths can elicit this response, but melatonin suppression is maximally sensitive to visible short wavelength light. With the conversion of roadway lighting to solid state sources that have a greater short wavelength spectrum than traditional sources, there is a potential negative health impact through suppressed melatonin levels to roadway users and those living close to the roadway. This paper presents data on the impact of outdoor roadway lighting on salivary melatonin in three cohorts of participants: drivers, pedestrians, and those experiencing light trespass in their homes. Methods: In an outdoor naturalistic roadway environment, healthy participants (N = 29) each being assigned to a cohort of either pedestrian, driver, or light trespass experiment, were exposed to five different solid state light sources with differing spectral emissions and one no lighting condition. Salivary melatonin measurements were made under an average roadway luminance of 1.0 cd/m2 (IES RP-18 Roadway Lighting Requirements for expressway roads) with a corneal melanopic Equivalent Daylight Illuminances (EDI) ranging from 0.22 to 0.86 lux. Results: The results indicate that compared to the no roadway lighting condition, the roadway light source spectral content did not significantly impact salivary melatonin levels in the participants in any of the cohorts. Conclusions: These data show that recommended levels of street lighting for expressway roads do not elicit an acute suppression of salivary melatonin and suggest that the health benefit of roadway lighting for traffic safety is not compromised by an acute effect on salivary melatonin.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Modification at the C2'-O-Position with 2-Methylbenzothiophene Induces Unique Structural Changes and Thermal Transitions on Duplexes of RNA and DNA

Oligonucleotides can be chemically modified for a variety of applications that include their use as biomaterials, in therapeutics, or as tools to understand biochemical processes, among others. This work focuses on the functionalization of oligonucleotides of RNA and DNA (12- or 14-nucleotides long) with methylbenzothiophene (BT), at the C2'-O-position, which led to unique structural features. Circular dichroism (CD) analyses showed that positioning the BT units on one strand led to significant thermal destabilization, while duplexes where each strand contained 4-BT rings formed a distinct arrangement with cooperativity/interactions among the modifications (evidenced from the appearance of a band with positive ellipticity at 235 nm). Interestingly, the structural arrays displayed increased duplex stabilization (>10 °C higher than the canonical analogue) as a function of [Na + ] with an unexpected structural rearrangement at temperatures above 50 °C. Density functional theory–polarizable continuum model (DFT-PCM) calculations were carried out, and the analyses were in agreement with induced structural changes as a function of salt content. A model was proposed where the hydrophobic surface allows for an internal nucleobase rearrangement into a more thermodynamically stable structure, before undergoing full denaturation, with increased heat. While this behavior is not common, B- to Z-form duplex transitions can occur and are dependent on parameters that were probed in this work, i.e., temperature, nature of modification, or ionic content. To take advantage of this phenomenon, we probed the ability of the modified duplexes to be recognized by Zα (an RNA binding protein that targets Z-form RNA) via electrophoretic analysis and CD. Interestingly, the protein did not bind to canonical duplexes of DNA or RNA; however, it recognized the modified duplexes, in a [monovalent/divalent salt] dependent manner. Overall, the findings describe methodology to attain unique structural motifs of modified duplexes of DNA or RNA, and control their behavior as a function of salt concentration. While their affinity to RNA binding proteins, and the corresponding mechanism of action, requires further exploration, the tunable properties can be of potential use to study this, and other, types of modifications. The novel arrays that formed, under the conditions described herein, provide a useful way to explore the structure and behavior of modified oligonucleotides, in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Contrasting stream nitrate and sulfate response to recovery from experimental watershed acidification

Improvements in air quality have led to ecosystem recovery from acidic deposition, but the mechanisms and trajectories of this recovery are not fully understood. Here, we present long-term stream response and recovery data for paired watersheds at the Bear Brook Watershed in Maine (BBWM) during declining ambient SO 4 and NO 3 in precipitation. East Bear (EB) received ambient deposition from 1989 to 2018; West Bear (WB) received artificially elevated N+S from 1989 to 2016. The WB treatment was discontinued after 2016, the beginning of the recovery from both the experimental N+S and ambient decline. Stream SO 4 in WB gradually declined after the treatment ended, from ~147 µeq L -1 in 2010-16 to ~126 µeq L -1 in 2017-18. The declining S inputs induced desorption of SO 4 from soil phase surfaces, with stream loss far exceeding precipitation input. At the current rate of recovery, it will be many decades before the WB stream returns to pre-treatment SO 4 concentrations. In contrast, NO 3 is only weakly adsorbed in soil, and WB stream NO 3 concentrations rapidly declined from ~39 µeq L -1 in 2010-16 to ~5 µeq L -1 in 2017-18, comparable to the N-limited EB stream. The acid anions are strongly coupled to base cation chemistry in streams, and there was a distinct hysteretic response of Ca and Mg to the chronic acidification, as (Ca+Mg) increased rapidly during the initial years, followed by declining values due to depletion of the soil exchange complex. This 30-year monitoring study (1989-2019) provides insights into recovery mechanisms from acidic deposition and highlights the role of abiotic processes in soil that mediate nutrient cycling and retention. Finally, documenting the rapid response of N alongside the slower recovery for S identifies the temporal resolution necessary for other whole-watershed recovery studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystallographic Snapshots of Pre- and Post-Lanthanide Halide Hydrolysis─Reaction Products Captured by the 4-Amino-1,2,4-triazole Ligand

Reactions of lanthanide(III) chloride salts with 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz) in azole melts have led to the isolation of both hydrolysis and non-hydrolysis products in the same synthesis with the inclusion of a variety of ligands, anions, and water, allowing us to capture crystallographic snapshots of different forms and intermediate hydrolysis fragments. The structural studies reported here include anhydrous and hydrated nonhydrolyzed complexes which were isolated alongside hydrolysis products giving oxide/hydroxide lanthanide(III) dimers, tetramers, and ultimately hexamers. The compounds isolated include [Nd 2 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (4-NH 2 -1,2,4-Triaz) 2 ], [Ce 2 Cl 4 (μ 2 -Cl) 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 ] n , [Ce 2 (µ 2 -Cl) 4 (µ 2 -OH) 2 (µ 2 -4-NH 2 -1,2,4-Triaz) 2 ] n , [Ln 4 Cl 4 (µ 2 -Cl) 4 (µ 3 -OH) 4 (µ 2 -4-NH 2 -1,2,4-Triaz) 4 ] n •2nH 2 O (Ln = Ce, Nd), and [Ce 6 Cl 6 (µ 6 -O 0.5 )(µ 3 -Cl 0.5 ) 4 (µ 3 -Cl 0.75 ) 3 (µ 3 -OH) 0.75 (µ 2 -4-NH 2 -1,2,4-Triaz) 12 ((OH 2 ) 0.25 ) 2 ] 2 [CeCl 6 ][Cl 9 ]•xH 2 O. In all complexes all lanthanide atoms are pairwise connected via one or more 4-NH2-1,2,4-Triaz ligands and sometimes additional Cl - anions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Progress and innovations in the TCV tokamak research programme

Research on the Tokamak à Configuration Variable addresses a wide range of key questions relevant to ITER and future fusion power plants. Over the past two years, highly productive experimental campaigns have led to major advances across several areas: the ITER baseline scenario; pedestal properties in low-collisionality, peeling-limited conditions; and the development of high- β N , non-inductive regimes. Alternative high-confinement scenarios have likewise received significant attention, with remarkable progress in quasi-continuous exhaust operation, X-point radiator plasmas, and negative triangularity configurations. Substantial achievements were also made in the mitigation or benign termination of runaway electron beams, in elucidating fast-ion loss mechanisms, and in improving exhaust behaviour in both conventional and alternative divertor geometries. These experimental results have been strongly supported by advances in modelling and their direct application to the experiment, ranging from gyrokinetic simulations of core and pedestal turbulence to fluid-based studies of scrape-off layer and divertor physics in diverse geometries. Plasma control has taken on an increasingly important role, with model-based and data-driven approaches now closely intertwined with physics studies. This article provides a overview of these recent activities, together with a brief outlook on forthcoming upgrades and next steps.

EPFL↗