Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Order parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Gas Chromatograph Method Optimization Trade Study for RESOLVE: 20-meter Column v. 8-meter Column

RESOLVE is the payload on a Class D mission, Resource Prospector, which will prospect for water and other volatile resources at a lunar pole. The RESOLVE payload's primary scientific purpose includes determining the presence of water on the moon in the lunar regolith. In order to detect the water, a gas chromatograph (GC) will be used in conjunction with a mass spectrometer (MS). The goal of the experiment was to compare two GC column lengths and recommend which would be best for RESOLVE's purposes. Throughout the experiment, an Inficon Fusion GC and an Inficon Micro GC 3000 were used. The Fusion had a 20m long column with 0.25mm internal diameter (Id). The Micro GC 3000 had an 8m long column with a 0.32mm Id. By varying the column temperature and column pressure while holding all other parameters constant, the ideal conditions for testing with each column length in their individual instrument configurations were determined. The criteria used for determining the optimal method parameters included (in no particular order) (1) quickest run time, (2) peak sharpness, and (3) peak separation. After testing numerous combinations of temperature and pressure, the parameters for each column length that resulted in the most optimal data given my three criteria were selected. The ideal temperature and pressure for the 20m column were 95 C and 50psig. At this temperature and pressure, the peaks were separated and the retention times were shorter compared to other combinations. The Inficon Micro GC 3000 operated better at lower temperature mainly due to the shorter 8m column. The optimal column temperature and pressure were 70 C and 30psig. The Inficon Micro GC 3000 8m column had worse separation than the Inficon Fusion 20m column, but was able to separate water within a shorter run time. Therefore, the most significant tradeoff between the two column lengths was peak separation of the sample versus run time. After performing several tests, it was concluded that better detection via good peak separation with a longer run time is a better asset than moderate peak separation with a shorter run time. Even given that RESOLVE is highly interested in water and that mission timeline is of significant importance given the short seven-to-ten-day mission timeline, worse detection with an 8m column may lead to overlooking other substances existing on the moon that could advance planetary science. Thus, I recommend the 20m column. However, if mission timeline and water separation are deemed the highest priority, the 8m column should be selected due to its ability to separate water within a shorter run time than the 20m column.

Column↗
DOE OSTI2021

Equivalence principle in Reissner–Nordström geometry

The Equivalence Principle is a key element in the development of General Relativity. In one of its formulations, the Equivalence Principle states that a reference frame at rest in a uniform gravitational field is equivalent to a reference frame in uniformly accelerated motion in the absence of any gravitation field. We analyze the spacetime surrounding a non-rotating spherically symmetric charged body, known as Reissner–Nordström geometry, and exhibit a coordinate transformation, which makes explicit its compatibility with the Equivalence Principle. We revisit the Schwarzschild case, previously analyzed in the literature. We also consider second order terms of the relevant expansion parameters in the approximate metric, which is needed for the computed curvature quantities to be correct at zeroth order.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1984

Sulfur flows of Ra Patera, Io

Voyager 1 imaging data have been used to investigate the color and morphology of several radial flow-like features at Ra Patera, a broad volcanic structure at approximately 8 deg latitude and 325 deg longitude on the Galilean satellite Io. It was found that downstream progressions of flow color and morphology are consistent with lava of a predominately sulfur composition cooling radiatively and erupting in the range of 470 to 520 K at effusion rates at 10 to the 10th to 10 to the 11th cubic cm/sec. This implies global resurfacing rates by volcanic flows on Io of the order of 1 cm/year. Calculated energy content and effusion rates for flows at Ra Patera, using the physical parameters of sulfur, are of the order of the largest known terrestrial basaltic eruptions and are consistent with calculations of globally available energy.

Pieri, D. C.↗
NASA NTRS1985

Shock acceleration of electrons and ions in solar flares

The simultaneous first-order Fermi shock acceleration of electrons, protons, and alpha particles are compared to observations of solar energetic particle events. For each event, a unique shock compression ratio in the range of approximately 1.6-3 produces spectra in good agreement with observation. The range in compression ratios predicts that the more than five orders of magnitude spread in electron-to-proton intensity ratios observed at MeV energies is compressed to about three orders of magnitude at an assumed injection energy of 100 keV. The remaining spread can be accounted for with a modest range of injection conditions. The model predicts that the acceleration time to a given energy will be approximately equal for electrons and protons, and for reasonable solar parameters, can be on the order of 1 s to approximately 100 MeV.

Ellison, D. C.↗
NASA NTRS1986

Shock acceleration of electrons and ions in solar flares

The simultaneous first-order Fermi shock acceleration of electrons, protons, and alpha particles are compared to observations of solar energetic particle events. For each event, a unique shock compression ratio in the range approx. 1.6 to 3 produces spectra in good agreement with observation. The range in compression ratios predicts that the more than 5 orders of magnitude spread in electron to proton intensity ratios observed at MeV energies is compressed to about 3 orders of magnitude at an assumed injection energy of 100 keV. The remaining spread can be accounted for with a modest range of injection conditions. The model predicts that the acceleration time to a given energy will be approximately equal for electrons and protons and, for reasonable solar parameters, can be on the order of 1 second to approx. 100 MeV.

Ellison, Donald C.↗
NASA NTRS2005

K-shell Photoabsorption of Oxygen Ions

The high spectral resolutions of the Chandra and XMM-Newton X-ray observatories have unveiled the useful diagnostic possibilities of oxygen K absorption. To mention a few, strong O VII and O VIII edges are almost ubiquitous in the spectra of Seyfert 1 galaxies which have been used by Lee et al. (2001) to predict of a warm dust absorber along the line of sight; although this conclusion has been criticized in the light of a data reanalysis (SA0 et al. 2003), Steenbrugge et al. (2003) have detected inner-shell transitions of O III-O VI in the spectrum of NGC 5548 that point to a warm absorber that spans three orders of magnitude in ionization parameter. Moreover, Behar et al. (2003) have stressed that, in the case of both Seyfert 1 and Seyfert 2 galaxies, a broad range of oxygen charge states are usually observed along the line of sight that must be fitted simultaneously, and may imply strong density gradients of 2-4 orders of magnitude over short distances.

Garcia, J.↗
DOE OSTI2023

Measurement of Suppression of Large-Radius Jets and Its Dependence on Substructure in Pb+Pb Collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ATLAS Detector

This letter presents a measurement of the nuclear modification factor of large-radius jets in $\sqrt{s_{NN}}$ = 5.02 TeV Pb + Pb collisions by the ATLAS experiment. The measurement is performed using 1.72 nb –1 and 257 pb –1 of Pb + Pb and pp data, respectively. The large-radius jets are reconstructed with the anti-k t algorithm using a radius parameter of R = 1.0, by reclustering anti-k t R = 0.2 jets, and are measured over the transverse momentum (p T ) kinematic range of 158 < p T <1000 GeV and absolute pseudorapidity |y| < 2.0. The large-radius jet constituents are further reclustered using the k t algorithm in order to obtain the splitting parameters, $\sqrt{d_{12}}$ and Δ⁢R 12 , which characterize the transverse momentum scale and angular separation for the hardest splitting in the jet, respectively. The nuclear modification factor, R AA , obtained by comparing the Pb + Pb jet yields to those in pp collisions, is measured as a function of jet transverse momentum (p T ) and $\sqrt{d_{12}}$ or Δ⁢R 12 . A significant difference in the quenching of large-radius jets having single subjet and those with more complex substructure is observed. Systematic comparison of jet suppression in terms of R AA for different jet definitions is also provided. Presented results support the hypothesis that jets with hard internal splittings lose more energy through quenching and provide a new perspective for understanding the role of jet structure in jet suppression.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1972

Analysis and design of three dimensional supersonic nozzles. Volume 3: A design technique for multiple nozzle configurations

An iteration procedure for optimum nozzle design with application to hypersonic aircraft is discussed. In the procedure, intial values of several of the design parameters are assumed from simplified approximate considerations and are then varied systematically in order to determine the value of each parameter which optimizes nozzle performance. Improvements in nozzle performance are obtained by perturbing the initially assumed values of the geometric parameters on the basis of a computer analysis.

Ferri, A.↗
NASA NTRS1995

The threshold for stellar winds in hot main-sequence stars

The profiles of ultraviolet resonance lines of C IV were surveyed in a sample of 29 cluster and association members in the spectral type range O9-B2 III-V, together with a few field stars of interest. The temperatures and gravities of the stars were taken from the model atmosphere analysis by Grigsby, Morrison, & Anderson (1992), and the luminosities were estimated on the basis of cluster and association distances from the recent literature. A parameter P(sub w) was defined in order to describe the degree and assymetry of the C IV profile. This parameter, together with total C IV equivalent width, was found to be well correlated with stellar luminosity and temperature. A few anomalous stars were noted: tau Sco, HD 66665, HD 13621, and the ON stars HD12323 and HD 201345. The results suggest a sudden onset of observable mass loss at T(effective) = 27,500 +/- 500 K, log (L/solar luminosity) = 4.4 +/- 0.12, in agreement with the previous study by Prinja (1989). At T(effective) = 28,000 K and log g = 4, our non-LTE model atmospheres show an enhancement in the ground-state population of C(+3) in their topmost layer, which could be responsible for initiation of the winds via radiation pressure on the C(+3) ions, or for the onset of visibility of C(+3) ions in the wind because of an increase in the optical depth in the C IV lines in the outermost layers.

Grigsby, James A.↗
NASA NTRS2010

Rotational Alignment Altered by Source Position Correlations

In the construction of modern Celestial Reference Frames (CRFs) the overall rotational alignment is only weakly constrained by the data. Therefore, common practice has been to apply a 3-dimensional No-Net-Rotation (NNR) constraint in order to align an under-construction frame to the ICRF. We present evidence that correlations amongst source position parameters must be accounted for in order to properly align a CRF at the 5-10 (mu)as level of uncertainty found in current work. Failure to do so creates errors at the 10-40 (mu)as level.

Jacobs, Chris S.↗
NASA NTRS1971

Designing the brawny gas bearing.

Discussion of a graphic technique for matching specific groove parameters to operating conditions in order to optimize the load carrying capacity of a herringbone-grooved bearing. Details are given on the optimization of the film thickness ratio, the groove width ratio, the groove angle, and the groove length ratio to obtain a maximum radial load capacity. The effect of the dimensionless bearing number on optimal groove configuration parameters is shown in diagrams. Curves are also plotted to compare the capacities of a herringbone-grooved bearing and a plain bearing, showing the former has a higher load capacity than the latter when the dimensionless bearing number is large.

Hamrock, B. J.↗
NASA NTRS1998

Application of Parametrized Post-Newtonian Methods to the Gravitational IS of Satellite Energy Exchange Data

Project Satellite Energy Exchange (SEE) is a free-flying, high altitude satellite that utilizes space to construct a passive, low-temperature, nano-g environment in order to accurately measure the poorly known gravitational constant G plus other gravitational parameters that are difficult to measure in an earth-based laboratory. Eventually data received from SEE must be analyzed using a model of the gravitational interaction including parameters that describe deviations from general relativity and experiment. One model that can be used to fit tile data is the Parametrized post- Newtonian (PPN) approximation of general relativity (GR) which introduces ten parameters which have specified values in (GR). It is the lowest-order, consistent approximation that contains non linear terms. General relativity predicts that the Robertson parameters, gamma (light deflection), and beta (advance of the perihelion), are both 1 in GR. Another eight parameters, alpha(sub k), k=1,2,3 and zeta(sub k), k=1,2,3,4 and Xi are all zero in GR. Non zero values for alpha(sub k) parameters predict preferred frame effects; for zeta(sub k) violations of globally conserved quantities such as mass, momentum and angular momentum; and for Xi a contribution from the Whitehead theory of gravitation, once thought to be equivalent to GR. In addition, there is the possibility that there may be a preferred frame for the universe. If such a frame exists, then all observers must measure the velocity omega of their motion with respect to this universal rest frame. Such a frame is somewhat reminiscent of the concept of the ether which was supposedly the frame in which the velocity of light took the value c predicted by special relativity. The SEE mission can also look for deviations from the r(exp -2) law of Newtonian gravity, adding parameters alpha and lamda for non Newtonian behavior that describe the magnitude and range of the r(exp -2) deviations respectively. The foundations of the GR supposedly agree with Newtonian gravity to first order so that the parameters alpha and lamda are zero in GR. More important, however, GR subsequently depends on this Newtonian approximation to build up the non linear higher-order terms which forms the basis of the PPN frame work.

Smalley, Larry L.↗
NASA NTRS2006

Local Neutral Density and Plasma Parameter Measurements in a Hollow Cathode Plume

In order to understand the cathode and keeper wear observed during the Extended Life Test (ELT) of the DS1 flight spare NSTAR thruster and provide benchmarking data for a 2D cathode/cathode-plume model, a basic understanding of the plasma and neutral gas parameters in the cathode orifice and keeper region of the cathode plume must be obtained. The JPL cathode facility is instrumented with an array of Langmuir probe diagnostics along with an optical diagnostic to measure line intensity of xenon neutrals. In order to make direct comparisons with the present model, a flat plate anode arrangement was installed for these tests. Neutral density is deduced from the scanning probe data of the plasma parameters and the measured xenon line intensity in the optical regime. The Langmuir probes are scanned both axially, out to 7.0 cm downstream of the keeper, and radially to obtain 2D profile of the plasma parameters. The optical fiber is housed in a collimating stainless steel tube, and is scanned to view across the cathode plume along cuts in front of the keeper with a resolution of 1.5 mm. The radial intensities are unfolded using the Abel inversion technique that produces radial profiles of local neutral density. In this paper, detailed measurements of the plasma parameters and the local neutral densities will be presented in the cathode/keeper plume region for a 1.5 cm diameter NEXIS cathode at 25A of discharge current at several different strengths of applied magnetic field.

Plasma density↗
NASA NTRS1978

Long-term radiation effects on GaAs solar cell characteristics

This report investigates preliminary design considerations which should be considered for a space experiment involving Gallium Arsenide (GaAs) solar cells. The electron radiation effects on GaAs solar cells were conducted in a laboratory environment, and a statistical analysis of the data is presented. In order to augment the limited laboratory data, a theoretical investigation of the effect of radiation on GaAs solar cells is also developed. The results of this study are empirical prediction equations which can be used to estimate the actual damage of electrical characteristics in a space environment. The experimental and theoretical studies also indicate how GaAs solar cell parameters should be designed in order to withstand the effects of electron radiation damage.

Heinbockel, J. H.↗
NASA NTRS1975

A two parameter survey of periodic orbits in the restricted problem of three bodies

Within the context of the restricted problem of three bodies the effects caused by varying the mass ratio of the primaries and the eccentricity of their orbits, upon periodic orbits of the infinitesimal mass which are numerical continuations of circular orbits in the ordinary problem of two bodies are shown. A recursive power series technique is used to numerically integrate the equations of motion as well as the first variational equations in order to generate a two parameter family of perodic orbits and identify the linear stability characteristics. Seven such families are investigated with equally spaced mass ratios from 0.0 to 1.0 and eccentricities of the orbits of the primaries in a range 0.0 to 0.6. Stable orbits are associated with large distances of the infinitesimal mass from the perturbing primary, nearly circular motion of the primaries, and small mass ratios of the primaries. Unstable orbits for the infinitesimal mass are associated with small distances from the perturbing primary, highly elliptic orbits of the primaries and large mass ratios.

Shelus, P. J.↗
DOE OSTI2022

A fractional model for anomalous diffusion with increased variability: Analysis, algorithms and applications to interface problems

Fractional equations have become the model of choice in several applications where heterogeneities at the microstructure result in anomalous diffusive behavior at the macroscale. Here, we introduce a new fractional operator characterized by a doubly-variable fractional order and possibly truncated interactions. Under certain conditions on the model parameters and on the regularity of the fractional order we show that the corresponding Poisson problem is well-posed. Additionally, we introduce a finite element discretization and describe an efficient implementation of the finite-element matrix assembly in the case of piecewise constant fractional order. Through several numerical tests, we illustrate the improved descriptive power of this new operator across media interfaces. Furthermore, we present one-dimensional and two-dimensional h-convergence results that show that the variable-order model has the same convergence behavior as the constant-order model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Islands and current singularities in quasisymmetric toroidal plasmas

The presence of current singularities in a quasisymmetric magnetic field is explored. Quasisymmetry is shown effective in isolating Pfirsch–Schlüter singularities, to leading order, to a single magnetic surface resonant with the helicity of the symmetry. The effects of pressure driven currents are analyzed, indicating that exclusion of this surface from the plasma volume reduces the potential opening of islands but does not generally eliminate them completely due to higher order asymmetric geometric effects. These three-dimensional effects are contained in quasisymmetry and indicate the complexity of finding consistent solutions and their potential sensitivity. The δ-function current singularities show a distinct quasisymmetric behavior only when the higher-order Fourier content of B is relevant for the resistive stability parameter D R (not included in leading-order near-axis expansions). In such scenarios, quasisymmetry proves advantageous, both in simplicity and avoidance of amplification by low-order rational surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗