Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Photonic topological phase transition on demand

On-demand, switchable phase transitions between topologically nontrivial and trivial photonic states are demonstrated. Specifically, it is shown that the integration of a two-dimensional array of coupled ring resonators within a thermal heater array enables unparalleled control over topological protection of photonic modes. Importantly, auxiliary control over a spatial phase modulation opens up a way to guide topologically protected edge modes along generated virtual boundaries. The proposed approach can lead to practical realizations of topological phase transitions in many photonic applications, including topologically protected photonic memory/logic devices, robust optical modulators, and switches.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrically switchable metallic polymer metasurface device with gel polymer electrolyte

Abstract We present an electrically switchable, compact metasurface device based on the metallic polymer PEDOT:PSS in combination with a gel polymer electrolyte. Applying square-wave voltages, we can reversibly switch the PEDOT:PSS from dielectric to metallic. Using this concept, we demonstrate a compact, standalone, and CMOS compatible metadevice. It allows for electrically controlled ON and OFF switching of plasmonic resonances in the 2–3 µm wavelength range, as well as electrically controlled beam switching at angles up to 10°. Furthermore, switching frequencies of up to 10 Hz, with oxidation times as fast as 42 ms and reduction times of 57 ms, are demonstrated. Our work provides the basis towards solid state switchable metasurfaces, ultimately leading to submicrometer-pixel spatial light modulators and hence switchable holographic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanophotonic quantum sensing with engineered spin-optic coupling

Nitrogen vacancy centers in diamond provide a spin-based qubit system with long coherence time even at room temperature, making them suitable ambient-condition quantum sensors for quantities including electromagnetic fields, temperature, and rotation. The optically addressable level structures of NV spins allow transduction of spin information onto light-field intensity. The sub-optimal readout fidelity of conventional fluorescence measurement remains a significant drawback for room-temperature ensemble sensing. Here, we discuss nanophotonic interfaces that provide opportunities to achieve near-unity readout fidelity based on IR absorption via resonantly enhanced spin-optic coupling. Spin-coupled resonant nanophotonic devices are projected to particularly benefit applications that utilize micro- to nanoscale sensing volume and to outperform present methods in their volume-normalized sensitivity.

42 ENGINEERING↗
DOE OSTI2024

Optical filters made from random metasurfaces using Bayesian optimization

Abstract We theoretically investigate the ability to design optical filters from a single material and a single layer of randomly dispersed resonant dielectric particles, defining a random metasurface. Using a Bayesian and generalized Mie inverse-design approach, we design particle radii distributions that give rise to longpass, shortpass, bandpass, and bandstop spectral bands in the infrared. The optical response is shown to be directly related to electric and magnetic multipole scattering of the constituent particles and their near field coupling. We discuss the effect of the particle size distribution and particle–particle coupling interactions on filter design in random systems lacking long-range order.

Materials Science↗
DOE OSTI2024

Clearing a path for light through non-Hermitian media

Abstract The performance of all active photonic devices today is greatly limited by loss. Here, we show that one can engineer a low loss path in a metal-clad lossy multi-mode waveguide while simultaneously achieving high-performance active photonic devices. We leverage non-Hermitian systems operating beyond the exceptional point to enable the redistribution of losses in a multi-mode photonic waveguide. Consequently, our multi-mode waveguide offers low propagation losses for fundamental mode while other higher order modes experience prohibitively high losses. Furthermore, we show an application of this non-Hermitian waveguide platform in designing power-efficient thermo-optic phase shifters with significantly faster response times than conventional silicon-based thermo-optic phase shifters. Our device achieves a propagation loss of less than 0.02 dB μm −1 for our non-Hermitian waveguide-based phase shifters with high performance efficiency of P π ⋅ τ = 19.1 mW μs. In addition, our phase shifters have significantly faster response time (rise/fall time), τ ≈ 1.4 μs, compared to traditional silicon based thermo-optic phase shifters.

Materials Science↗
DOE OSTI2025

Single‐photon emitters in PECVD‐grown silicon nitride films: from material growth to photophysical properties

Abstract Silicon nitride (SiN) is a key material for quantum photonics due to its wide transparency window, high refractive index, low optical losses, and semiconductor foundry compatibility. We study the formation of single‐photon emitters in SiN films grown by plasma‐enhanced chemical vapor deposition (PECVD), exploring their photophysical properties and dependence on growth conditions. Emitters were observed across the entire range of nitrogen‐to‐silicon precursor ratios, from silicon‐rich to nitrogen‐rich conditions, enabled by the low background fluorescence. We demonstrate single‐photon emitters in SiN films with a higher refractive index (1.8–1.9) compared to our previous reports (∼1.7). Notably, nitrogen‐rich, thinner films yield particularly bright emitters with shorter emission lifetimes, likely due to more efficient annealing. Silicon‐rich SiN films exhibit red‐shifted emission, suggesting that composition may provide a mechanism for wavelength tuning. These findings establish the feasibility of emitters formation in foundry standard PECVD tools, advancing the scalability and lab‐to‐fab transition of SiN‐based quantum photonic technologies.

Materials Science↗
DOE OSTI2025

Metalens formed by structured arrays of atomic emitters

Abstract Arrays of atomic emitters have proven to be a promising platform to manipulate and engineer optical properties, due to their efficient cooperative response to near‐resonant light. Here, we theoretically investigate their use as an efficient metalens. We show that, by spatially tailoring the (subwavelength) lattice constants of three consecutive two‐dimensional arrays of identical atomic emitters, one can realize a large transmission coefficient with arbitrary position‐dependent phase shift, whose robustness against losses is enhanced by the collective response. To characterize the efficiency of this atomic metalens, we perform large‐scale numerical simulations involving a substantial number of atoms (N∼ 5 × 10 5 ) that is considerably larger than comparable works. Our results suggest that low‐loss, robust optical devices with complex functionalities, ranging from metasurfaces to computer‐generated holograms, could be potentially assembled from properly engineered arrays of atomic emitters.

Materials Science↗
DOE OSTI2025

Exceptional points in a passive strip waveguide

Abstract Exceptional points (EPs) in non‐Hermitian systems have attracted significant interest due to their unique behaviors, including novel wave propagation and radiation. While EPs have been explored in various photonic systems, their integration into standard photonic platforms can expand their applicability to broader technological domains. In this work, we propose and experimentally demonstrate EPs in an integrated photonic strip waveguide configuration, exhibiting unique deep wave penetration and uniform‐intensity radiation profiles. By introducing the second‐order grating on one side of the waveguide, forward and backward propagating modes are coupled both directly through second‐order coupling and indirectly through first‐order coupling via a radiative intermediate mode. To describe the EP behavior in a strip configuration, we introduce modified coupled‐mode equations that account for both transverse and longitudinal components. These coupled‐mode formulas reveal the formation of EPs in bandgap closure, achieved by numerically optimizing the grating’s duty cycle to manipulate the first‐ and second‐order couplings simultaneously. Experimental observations, consistent with simulations, confirm the EP behavior, with symmetric transmission spectra and constant radiation profiles at the EP wavelength, in contrast to conventional exponential decay observed at detuned wavelengths. These results demonstrate the realization of EPs in a widely applicable strip waveguide configuration, paving the way for advanced EP applications in nonlinear and ultrafast photonics, as well as advanced sensing technologies.

Materials Science↗
DOE OSTI2016

High-Frequency Vertical Profiling of Meteorological Parameters Using AMF1 Facility during RAWEX?GVAX at ARIES, Nainital

An extensive field study, RAWEX-GVAX, was carried out during a 10-month (June 2011-March 2012) campaign at ARIES, Nainital and observations on a wide range of parameters like physical and optical properties of aerosols, meteorological parameters and boundary layer evolution were made. This work presents results obtained from high-frequency (four launches per day), balloon-borne observations of meteorological parameters (pressure, temperature, relative humidity, wind speed and wind direction). These observations show wind speed as high as 84 m/s near the subtropical jet. It is shown that reanalysis wind speeds are in better agreement at 250 hPa (altitude of subtropical jet) than those above or below this value (100 hPa or 500 hPa). These observations also demonstrate that AIRS-derived temperature profiles are negatively biased in the lower altitude region, whereas they are positively biased near the tropopause. WRF simulated results are able to capture variations in temperature, humidity and wind speed profile reasonable well. WRF and AIRS-derived tropopause height, tropopause pressure and tropopause temperature also show agreement with radiosonde estimates.

Aerosols↗
DOE OSTI2014

COLLABORATIVE RESEARCH: Study of Aerosol Sources and Processing at the GVAX Pantnagar Supersite

This project funded the participation of scientists from seven research groups, running more than thirty instruments, in the Winter Intensive Operating Period (January-February 2012) of the Clean Air for London (ClearfLo) campaign at a rural site in Detling, UK, 45 km southeast of central London. The primary science questions for the ClearfLo Winter IOP were, 1) what is the urban increment of particulate matter (PM) and other pollutants in the greater London area, and, 2) what is the contribution of solid fuel use for home heating to wintertime PM? An additional motivation for the Detling measurements was the question of whether coatings on black carbon particles enhance absorption. The following four key accomplishments have been identified so far: 1) Chemical, physical and optical characterization of PM from local and regional sources (Figures 2, 4, 5 and 6). 2) Measurement of urban increment in particulate matter and gases in London (Figure 3). 3) Measurement of optical properties and chemical composition of coatings on black carbon containing particles indicates absorption enhancement. 4) First deployment of chemical ionization instrument (MOVI-CI-TOFMS) to measure both particle-phase and gas-phase organic acids. (See final report from Joel Thornton, University of Washington, for details.) Analysis of the large dataset acquired in Detling is ongoing and will yield further key accomplishments. These measurements of urban and rural aerosol properties will contribute to improved modeling of regional aerosol emissions, and of atmospheric aging and removal. The measurement of absorption enhancement by coatings on black carbon will contribute to improved modeling of the direct radiative properties of PM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Black Carbon at the Mt. Bachelor Observatory Field Campaign Report

This campaign was initiated to measure refractory black carbon (rBC, as defined in Schwarz et al. (2010)) at the Mt. Bachelor Observatory (MBO) using the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility single-particle soot photometer (SP2; unit 54). MBO is a high-elevation site located on the summit of Mt. Bachelor in central Oregon, USA (43.979°N, 121.687°W, 2,763 meters ASL). This site is operated by Professor Dan Jaffe’s group at the University of Washington Bothell and has been used continuously as an atmospheric observatory for the past 12 years (Jaffe et al., 2005; Gratz et al., 2014). The location of MBO allows frequent sampling of the free troposphere along with a wide array of plumes from regional and distant sources. MBO is currently supported with funding from the National Science Foundation (NSF) to the Principal Investigator (PI; D. Jaffe) via the project “Influence of Free Tropospheric Ozone and PM on Surface Air Quality in the Western U.S.” (#1447832) covering the period 03/15/2015 to 02/28/2018. The SP2 instrument from Droplet Measurement Technologies provides particle-resolved measurements of rBC mass loading, size and mass distributions, and mixing state. The SP2 was installed at MBO on 6/27/2016 and ran through 9/23/2016. Additional measurements at MBO during this campaign included carbon monoxide (CO), fine particulate matter (PM1), aerosol light scattering coefficients (σscat) at three wavelengths using a TSI nephelometer, aerosol absorption coefficients (σabs) with the Brechtel tricolor absorption photometer (TAP), aerosol number size distributions with a scanning mobility particle sizer spectrometer (SMPS), and black carbon (eBC) with an aethalometer. BC data from this campaign have been submitted to the ARM Data Archive. Black carbon (BC) is the predominant light-absorbing aerosol constituent in the atmosphere, and is estimated to exert a positive radiative forcing second only to CO 2 (Ramanathan and Carmichael, 2008). One of the largest sources of BC globally is biomass burning (BB). (Akagi et al., 2011; Andreae and Merlet, 2001; Bond et al., 2013; Bond et al., 2004; Reid et al., 2005b): a source that is likely to increase in the Western U.S. due to climate change (Dennison et al., 2014; Abatzoglon and Williams, 2016; Westerling et al., 2006). Given the likely increased role of BB aerosol in atmospheric forcing, we need to improve our understanding of the physical and optical properties of aged BB aerosol. During the SP2 deployment period at MBO we observed seven BB events, all of which originated from the Gap Fire in Northern California, which burned 33,867 acres in the Klamath National Forest (https://inciweb.nwcg.gov/incident/4997/). Heavy smoke plumes from this fire were transported to MBO from 8/29/2016 to 8/31/2016. We calculated back-trajectories using the National Oceanic and Atmospheric Administration (NOAA) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model, version 4 (Draxler, 1999; Draxler and Hess, 1997, 1998; Stein et al., 2015) to confirm transport from the fire locations to MBO. We identified the fire locations using moderate resolution imaging spectroradiometer (MODIS) satellite-derived active fire counts (Justice et al., 2002). Transport time for all of the BB events ranged from 8 to 32 hours.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Understanding the Evolution of Biomass Burning Particles in the Atmosphere: Analysis of BBOP Data, Laboratory Experiments, and Model Integration

Submicron particles in the atmosphere can have a profound influence on Earth’s climate [Stocker et al., 2013]. Particulate matter (PM) affects climate via both direct effects (scattering or absorption of radiation) and indirect effects (changes to the formation and properties of clouds). Biomass burning (BB) is the largest global source of submicron, carbonaceous particles [Wiedinmyer et al., 2011]. Field campaigns have shown that BB aerosol (BBA) can evolve through rapid transformations and removal processes in the atmosphere, with changing radiative and hygroscopic properties, but these processes are not well characterized. Better understanding of the evolution of biomass burning PM in the atmosphere is critical for improving the accuracy of regional to global climate models. In order to address uncertainties in the initial physical, chemical and radiative forcing of BBA and the evolution of these parameters, DOE ASR conducted an airborne field campaign, the Biomass Burning Observation Project (BBOP), during the summer and fall of 2013 to make measurements in the plumes of northwest U.S. wildfires and southeast U.S. agricultural burns. BBOP provided unique, extremely detailed trace gas and particle measurements in fresh biomass burning plumes and captured large, rapid downwind transformations within a few hours of the sources. These fast changes in properties have also been observed in laboratory-generated BB smoke in a smog chamber, but in general the controlling factors and most likely outcomes in the real atmosphere are still not clear. The goals of this project were to 1) analyze and interpret the BBOP measurements in detail, 2) conduct laboratory experiments to explore the formation of tar balls, and 3) to incorporate our findings into improved models of biomass burning emissions and aging. This research focuses on understanding the chemical, physical and optical properties and transformations of BB emissions in the near-field within hours downwind of the burn and on a more regional scale and, in turn, how BB emissions relate to climate forcing. Analysis of the BBOP data paid particular attention to relating SOA production, changes in size distribution, and mixing state to the environmental conditions (gas-phase precursors, relative humidity, radiation, oxidants, NO x , etc.). This project included subcontracts and unfunded collaborations with many of the key participants in the BBOP campaign. Professor Robert Yokelson at the University of Montana is an expert on biomass burning fuels and emissions and participated in BBOP as an unfunded collaborator. Professor Peter Buseck at Arizona State University collected particle samples during BBOP and analyzed some of them as part of this project. Unfunded collaborators include Dr. Arthur Sedlacek, III at Brookhaven National Laboratory (BNL) and Dr. Rahul Zaveri at the Pacific Northwest National Laboratory (PNNL) who were both principal investigators in the BBOP campaign, focusing on measurements and modeling, respectively. We are also working closely with Prof. Qi Zhang at UC Davis to coordinate analysis of BBOP flight data and data from the Mt. Bachelor Observatory (MBO), and with Dr. Kouji Adachi at the Meteorological Institute (Japan) to analyze laboratory-generated tar ball samples.

09 BIOMASS FUELS↗
DOE OSTI2020

Turbulent properties from Doppler lidar

Permanent and mobile facilities deployed by the ARM program cover a wide range of climatic regions, with a suite of active remote-sensing of cloud and aerosol profiles complemented by comprehensive in-situ measurements of the chemical, physical and optical properties of aerosol measured at the surface. To be able to fully exploit these datasets requires an understanding of the transport from the surface and within the atmosphere, especially within the planetary boundary layer. This requires a method of identifying when the surface and atmosphere are dynamically-linked. Determining the state of the boundary layer, and defining a well-mixed boundary-layer, is therefore suitably described in terms of mixing; here, we will assume that mixing essentially means turbulent mixing. This necessitates accurate measurements of the winds and turbulent mixing in the atmosphere. Doppler lidar is an excellent tool for observing turbulent properties, and ARM has deployed commercially available Doppler lidars at many of the fixed and mobile facilities. Doppler lidars have been shown to provide accurate retrievals of wind and turbulent properties within the boundary layer , however, robust characterization and calculation of the Doppler lidar measurement uncertainties is required before deriving higher level data products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Program Overview Laboratory Directed Research and Development FY2020 (Annual Report)

Throughout this year’s report, we highlight how the LDRD program invests in ideas that make the world a safer place. We review key accomplishments and performance indicators, and we share snapshots of some of our talented staff. I also encourage you to visit our LDRD website and learn more about the 244 projects that we supported during fiscal year 2020. Looking to the future, I am confident that LDRD investments will continue to help LLNL remain at the forefront of innovative research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Raman Spectroscopy to Detect and Measure NOW Pheromones ("Orchard in a box")

Insect sex pheromones are chemical compounds that insects release to attract mates over distances of hundreds of meters or even kilometers, in complete darkness and without any audible signals. Use of synthetic forms of key compounds have in some cases become an essential component of monitoring and/or managing key pests of agricultural crops, including navel orangeworm (Amyelois transitella) (NOW) in California tree nuts. There are currently multiple commercially available mating disruption products available for NOW and recent studies have demonstrated that they can be effectively used to reduce crop damage. How mating disruption works is not fully established and likely varies across products and target species. For instance, it is not well understood how synthetic pheromones compete with natural pheromones and, in the case of monitoring, how efficaciously the insect follows the diffusing plumes, especially across large blocks and at plot borders. Whether an aerosol puffer is used for mating disruption or lure for monitoring population development, we currently lack the ability to fully understand how these synthetic pheromone compounds diffuse away from their point-source of emission – and subsequently how this might affect the efficacy of mating disruption and/or the accuracy of monitoring efforts. In response to these unknowns, Raman spectroscopy may offer a way to detect synthetic pheromone because of its analytical properties and recent technological advancements. In combination with nanostructured probes, RS has demonstrated the capability to detect volatiles at extremely low concentrations. We proposed to evaluate the use of Raman for the detection of synthetic and natural NOW pheromones and, were that to be successful, use this tool in subsequent years to measure pheromone diffusion in orchards.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Student Travel Support for the Inaugural Gordon Research Seminar on Multiphoton Processes (Final Technical Report)

This project provided financial support for early-career participants of the 2022 Gordon Research Seminar (GRS) on Multiphoton Processes, which was held on June 11 & 12, 2022 in Smithfield, Rhode Island, in conjunction with the Gordon Research Conference (GRC) on the same topic, held on June 12-17, 2022 in the same location. The GRC on Multiphoton Processes is an established conference series in the field of Atomic, Molecular and Optical (AMO) Physics with intense lasers. It regularly attracts around one hundred fifty researchers from around the world to present and discuss their forefront research featuring light-matter interaction in a variety of systems, ranging from atoms and molecules to nanosystems. In order to increase the attendance of early-career researchers at the GRC, in particular graduate students, post-docs, and other scientists with comparable levels of experience and education, the general assembly of the GRC on Multiphoton Processes decided during their last session in 2018 to organize a Gordon Research Seminar in conjunction with the next conference and organized and attended by early-career researchers. The GRS's primary intent is to provide a forum to graduate students and post-docs working in the field of intense and ultrafast AMO physics to present and exchange new data and cutting-edge ideas and to network with their peers at other research institutions around the U.S. and the world.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Synthesis of aerosol-cloud interactions over the southeast Atlantic throughout the seasonal cycle (Final Technical Report)

An analysis of the aerosol compositional, physical and optical datasets towards understanding why the single‐scattering‐albedo of smoke is so much lower over the southeast Atlantic than elsewhere, in particular the northern hemisphere. This includes data from the complementary NASA ORACLES aircraft campaign, which sampled closer to the African coast. The first analysis resulting from this prong of research was published earlier this year (Dobracki et al., 2023, ACP) and focused more on the free-tropospheric biomass burning aerosol (BBA). We primarily attributed the low SSA to a high number/mass fraction of black carbon, ranging from 15 to 40% of the total aerosol. We are further able to use other literature, the modified combustion efficiency, and the black carbon and carbon monoxide values to highlight a common source in dry, flame-efficient burning conditions of grasses. Condensation and coagulation of smaller aerosol particles onto the larger black carbon aerosols can also increased the SSA as the aerosol ages from 4 to 5 days. A comparison to data gathered over Ascension Island during the UK CLARIFY aircraft campaign indicates an organic aerosol loss relative to black carbon of about 50%. This is high compared to findings from other campaigns.

54 ENVIRONMENTAL SCIENCES↗