Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mission Data System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Venus Radar Mapper orbit accuracy analysis

Spacecraft orbital accuracies during the mapping phase of the Venus Radar Mapper Mission are the subject of this paper. The analysis presented describes the navigational strategy for the prime mission in support of mapping the planet Venus using a spacecraft deployed Synthetic Aperture Radar. Achievable orbital accuracies are shown to be limited by accuracy of interferometric data to be used. Implications of tracking system configurations and of expected degradation in data accuracy towards the end of the mission in the proximity of superior solar conjunction are examined.

Mohan, S. N.↗

Correction Technique for Raman Water Vapor Lidar Signal-Dependent Bias and Suitability for Water Wapor Trend Monitoring in the Upper Troposphere

The MOHAVE-2009 campaign brought together diverse instrumentation for measuring atmospheric water vapor. We report on the participation of the ALVICE (Atmospheric Laboratory for Validation, Interagency Collaboration and Education) mobile laboratory in the MOHAVE-2009 campaign. In appendices we also report on the performance of the corrected Vaisala RS92 radiosonde measurements during the campaign, on a new radiosonde based calibration algorithm that reduces the influence of atmospheric variability on the derived calibration constant, and on other results of the ALVICE deployment. The MOHAVE-2009 campaign permitted the Raman lidar systems participating to discover and address measurement biases in the upper troposphere and lower stratosphere. The ALVICE lidar system was found to possess a wet bias which was attributed to fluorescence of insect material that was deposited on the telescope early in the mission. Other sources of wet biases are discussed and data from other Raman lidar systems are investigated, revealing that wet biases in upper tropospheric (UT) and lower stratospheric (LS) water vapor measurements appear to be quite common in Raman lidar systems. Lower stratospheric climatology of water vapor is investigated both as a means to check for the existence of these wet biases in Raman lidar data and as a source of correction for the bias. A correction technique is derived and applied to the ALVICE lidar water vapor profiles. Good agreement is found between corrected ALVICE lidar measurments and those of RS92, frost point hygrometer and total column water. The correction is offered as a general method to both quality control Raman water vapor lidar data and to correct those data that have signal-dependent bias. The influence of the correction is shown to be small at regions in the upper troposphere where recent work indicates detection of trends in atmospheric water vapor may be most robust. The correction shown here holds promise for permitting useful upper tropospheric water vapor profiles to be consistently measured by Raman lidar within NDACC (Network for the Detection of Atmospheric Composition Change) and elsewhere, despite the prevalence of instrumental and atmospheric effects that can contaminate the very low signal to noise measurements in the UT.

MOHAVE-2009↗

Observing Fast Mesoscale Atmospheric Processes with a Geostationary Microwave Sounder

A geostationary microwave sounder, GeoSTAR, capable of providing continuous monitoring every 15 minutes of atmospheric temperature, water vapor, clouds, precipitation, and wind in the presence of clouds and precipitation, which will add tremendously to our ability to observe rapidly evolving dynamic atmospheric phenomena, such as hurricanes and severe storms, monsoonal moisture flow, and atmospheric rivers, has been developed at the Jet Propulsion Laboratory. GeoSTAR uses aperture synthesis to overcome the difficulty of attaining adequate spatial resolution from geostationary orbit. It is made possible with new technology that has now been developed and fully tested. Low-risk mission development can start as soon as funding becomes available. The sensor can be hosted on a commercial communications satellite, which could reduce the cost substantially. Plans have been developed at JPL for such a mission, called “GeoStorm”, focused on observing severe convective storms – tropical cyclones, mesoscale convective systems, and extratropical cyclones – with a goal of improving our understanding, modeling and prediction of these destructive phenomena. It can equally well be configured as an operational mission, where the goal is to collect data for immediate assimilation into regional forecast systems, provide “now-casting” as the storms unfold, and support post-disaster relief and recovery efforts. With key observables including vertical profiles of temperature, water vapor, wind and precipitation over a wide area, many focused applications are possible, particularly pertaining to aviation, transportation and marine operations, in both the civilian and defense domains.

Lambrigsten, Bjorn↗

Assimilation of CrIS Shortwave Infrared Channels into the GEOS Atmospheric Data Assimilation System

In recent years, there has been a renewed interest in using the 4.3 μmshortwave infrared (SWIR) band for temperature sounding. This is in part brought on by proposed cubesat missions sensing the 4.3 μmband such as MiSTIC and CIRAS. Jones et al. has shown that shortwave infrared channels on CrIScan be used effectively in NOAA's Global Forecast and Data Assimilation System (GDAS). In this work a similar study is presented using the Goddard Earth Observing System - Atmospheric Data Assimilation System (GEOS-ADAS). Results from Observing System Experiments (OSEs) utilizing SWIR CrISare presented using standard community accepted forecast metrics including Forecast Sensitivity to Observation Impact (FSOI), and an assessment of vertical sensitivity using Jacobians from the Community Radiative Transfer Model (CRTM). The implications and utility within the GEOS-ADAS for future NASA GMAO products are discussed.

Bryan M Karpowicz↗

SEDAC data and applications development plan V(1)

This Data and Applications Development Plan describes how the Socioeconomic Data and Applications Center (SEDAC) at the Consortium for International Earth Science Information Network (CIESIN) is responding to SEDAC's mission to develop new applications and information products that synthesize earth science and socioeconomic data in ways that support decision making. The SEDAC data and applications development effort is a primary means by which the Earth Observing System Data and Information System (EOSDIS) program can help to ensure that the scientific investment embodied in NASA's Mission to Planet Earth (MTPE) program leads to tangible benefits to the American people. The Plan describes the major issues concerned with global climate change, identifies important decision makers and other users who would benefit from improved data and information, and assesses key opportunities for responding to the needs of these users and the scientists who work with them. It then details specific plans for developing selected integrated data products and services and for making them available to the target users on an operational basis. This report provides a summary of the activities performed in connection with NASA/GSFC Letter Contract NAS5-3263 for the period shown.

Chen, Robert S.↗

Mariner Mark II and the exploration of the solar system

NASA's Solar System Exploration Committee has proposed the Mariner Mark II concept for the next generation of deep-space planetary observation missions, which will yield Voyager- and Galileo-quality focused data sets at a fraction of the costs associated with those spacecraft. Cost-limiting strategies under consideration include the use of reconfigurable designs, a multimission ground support system, and the incorporation of such selected new technologies as an all-X band telemetry system, fiber-optic rate sensors for use as an inertial reference system, image compression, and electronic and optical disk data distribution. It is believed possible to meet cost goals of 150-300 million/mission. The missions under consideration are comet rendezvous and sample return, main belt asteroid flybys, and orbits, flybys and probes of Saturn, Titan, Neptune and Uranus.

Neugebauer, M.↗

A method for selecting an operations concept to achieve successful mission operations

A procedure is presented for mapping operations concepts into design alternatives for a data system to be used in a generic ground based control center. A set of descriptive categories are developed to characterize the operational environment that relate to responsiveness, automation, and commitment. The operations concept is then developed according to a hierarchical decomposition of a mission statement into lower-level tasks, and the interpretation of the model's output is addressed. The method permits the description of operations concepts in terms of concept categories and ranges of alternatives between those categories. The descriptive framework can provide a mechanism for analyzing competing operations concepts.

Hornstein, Rhoda S.↗

Linear Covariance Techniques to Analyze a Multi-Vehicle, Multi-GN&C System with Applications to Rendezvous in a Near Rectilinear Halo Orbit

Typically for a rendezvous and docking scenario, only a single vehicle is considered the active vehicle. As a result, the target vehicle’s GN&C system is typically not a factor in the integrated performance analysis as it assumes a passive role. However, for upcoming NASA Artemis missions the active vehicle is both the chaser and target spacecraft. In addition, both vehicles are cooperating with one another, sharing telemetry data, and relying on data extracted from the GN&C system of the other. The process also includes a team of ground support personnel in mission control are tracking and monitoring each spacecraft uplinking state estimates and targeting solutions to support mission operations and enhance the onboard flight system performance. Being able to quickly analyze the impact of both vehicles with two different GN&C systems that also interact with the ground that does its own navigation and targeting uploads is critical. This paper outlines how to perform this rapid analysis using linear covariance techniques and applies them to a rendezvous scenario initiated in low lunar orbit and completed in a Near Rectilinear Halo Orbit (NRHO) representative of the NASA Artemis III mission.

Linear Covariance Analysis↗

Lunar escape systems feasibility study

Results are presented for a study conducted to determine the feasibility of simple lunar escape system concepts, to develop a spectrum of operational data, and to identify techniques and configurations suitable for the emergency escape mission. The study demonstrated the feasibility of the lunar emergency escape-to-orbit system (LESS) designed to provide a means for the two-man crew of a lunar module (LM) or extended-stay LM (ELM) to escape from the lunar surface in the event that the LM/ELM ascent stage becomes unsafe or is otherwise unable to take off. The LESS is to carry the two astronauts to a safe lunar orbit, where the Apollo command and service modules (CSM) are to be used for rendezvous and rescue, all within the lifetime of the backpack life support system (about 4 hr). It is concluded that simple manual control modes are sufficient, that simple boost profiles are acceptable, and that one man can deploy and set up the LESS. Initial guidance data can be calculated for the LESS by Mission Control and transmitted via the LM/ELM uplink.

Matzenauer, J. O.↗

NASA 2007 Western States Fire Missions (WSFM)

This presentation describes the objectives of the 2007 Western States Fire Mission (WSFM), which included demonstrating capabilities of the Ikhana unmanned aerial system (UAS) to overfly and collect sensor data on widespread fires throughout the Western United States, demonstrating long-endurance (20+ hours) mission capabilities, and delivering real-time imagery within 10 minutes of acquisition. Additionally, the operations concept, operational zones, and landing sites are highlighted. Provisions of the certificate of authorization are also addressed. Imagery obtained from the WSFM are included.

Posada, Herman A.↗

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

Optical Communications Feasibility Study for Science Mission Located at Sun-Earth Lagrange Point L2

NASA's Exploration and Space Communications projects division recently completed an investigative study, researching the feasibility of integrating optical communications capabilities onto a science-based mission orbiting at Lagrange Point 2 (L2). Optical communications has been demonstrated and integrated into many low-Earth-orbiting missions, however, using the technology as far as L2 needed to be thoroughly researched and proven similarly as efficient as the mission's planned radio frequency (RF) system, but preferably more efficient that the equivalent RF systems. The investigation team was charged with assessing the feasibility of including optical communications on the mission without interfering with its primary science objectives. This came to be known as the "Do No Harm" approach to accommodation. As science and detection technologies become more advanced, data rates and communications requirements continue to evolve. Missions with complex science instruments have a need for more optimized communications capabilities. Optical communications technologies provide NASA and industry missions with increased data rates and quicker response times, allowing scientists to access more data than ever before. Missions utilizing optical communications will have a lighter and more efficient method of transmitting data to users on Earth. The team investigating this opportunity discovered that including an optical communications payload on board the mission to provide a bi-directional link between the spacecraft and Earth-based ground stations is feasible and reaches data rates that are comparable to, and even exceed, the mission's RF system. In the course of their investigation, the team also discovered significant navigation and ranging benefits provided by the optical communications payload (OCP).

LCRD↗

Astronomy Spacelab payloads

Preliminary analyses of four typical Spacelab astronomy payloads have been completed. The payloads consist of instrumentation recommended by NASA and other scientists for early Shuttle missions. Design concepts have been prepared and compatibility with Shuttle and Spacelab verified. Mission parameters that meet payload requirements and efficiently utilize Shuttle resources have been selected. Integrated pointing and stabilization and command and data-handling system concepts have been developed. The results of all these activities indicate that productive astronomy missions can be carried out with Shuttle and Spacelab systems.

Ott, R.↗

Simulated NASA Satellite Data Products for the NOAA Integrated Coral Reef Observation Network/Coral Reef Early Warning System

This RPC (Rapid Prototyping Capability) experiment will demonstrate the use of VIIRS (Visible/Infrared Imager/Radiometer Suite) and LDCM (Landsat Data Continuity Mission) sensor data as significant input to the NOAA (National Oceanic and Atmospheric Administration) ICON/ CREWS (Integrated Coral Reef Observation System/Coral Reef Early Warning System). The project affects the Coastal Management Program Element of the Applied Sciences Program.

Estep, Leland↗

Space transfer vehicle concepts and requirements. Volume 1: Executive summary

The objectives of the Space Transfer Vehicle (STV) Concepts and Requirements studies were to provide sensitivity data on usage, economics, and technology associated with new space transportation systems. The study was structured to utilize data on the emerging launch vehicles, the latest mission scenarios, and Space Exploration Initiative (SEI) payload manifesting and schedules, to define a flexible, high performance, cost effective, evolutionary space transportation system for NASA. Initial activities were to support the MSFC effort in the preparation of inputs to the 90 Day Report to the National Space Council (NSC). With the results of this study establishing a point-of-departure for continuing the STV studies in 1990, additional options and mission architectures were defined. The continuing studies will update and expand the parametrics, assess new cargo and manned ETO vehicles, determine impacts on the redefined Phase 0 Space Station Freedom, and to develop a design that encompasses adequate configuration flexibility to ensure compliance with on-going NASA study recommendations with major system disconnects. In terms of general requirements, the objectives of the STV system and its mission profiles will address crew safety and mission success through a failure-tolerant and forgiving design approach. These objectives were addressed through the following: engine-out capability for all mission phases; built-in-test for vehicle health monitoring to allow testing of all critical functions such as, verification of lunar landing and ascent engines before initiating the landing sequence; critical subsystems will have multiple strings for redundancy plus adequate supplies of onboard spares for removal and replacement of failed items; crew radiation protection; and trajectories that optimize lunar and Mars performance and flyby abort capabilities.

Source record↗

CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps)

The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=1999-07-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

LONGWAVE UNFILTERED RADIANCE↗

Navigation Flight Test Results from the Low Power Transceiver Communications and Navigation Demonstration on Shuttle (CANDOS) Experiment

This paper presents the Global Positioning System (GPS) navigation results from the Communications and Navigation Demonstration on Shuttle (CANDOS) experiment flown on STS-107. This experiment was the initial flight of a Low Power Transceiver (LPT) that featured high capacity space- space and space-ground communications and GPS- based navigation capabilities. The LPT also hosted the GPS Enhanced Orbit Determination Experiment (GEODE) orbit determination software. All CANDOS test data were recovered during the mission using LPT communications links via the Tracking and Data Relay Satellite System (TDRSS). An overview of the LPT s navigation software and the GPS experiment timeline is presented, along with comparisons of test results to the NASA Johnson Space Center (JSC) real-time ground navigation vectors and Best Estimate of Trajectory (BET).

Haas, Lin↗