Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mesoscale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

TRACER Perspectives on Gulf-Breeze and Bay-Breeze Circulations and Coastal Convection

Abstract This study explores gulf-breeze circulations (GBCs) and bay-breeze circulations (BBCs) in Houston–Galveston, investigating their characteristics, large-scale weather influences, and impacts on surface properties, boundary layer updrafts, and convective clouds. The results are derived from a combination of datasets, including satellite observations, ground-based measurements, and reanalysis datasets, using machine learning, changepoint detection method, and Lagrangian cell tracking. We find that anticyclonic synoptic patterns during the summer months (June–September) favor GBC/BBC formation and the associated convective cloud development, representing 74% of cases. The main Tracking Aerosol Convection Interactions Experiment (TRACER) site located close to the Galveston Bay is influenced by both GBC and BBC, with nearly half of the cases showing evident BBC features. The site experiences early frontal passages ranging from 1040 to 1630 local time (LT), with 1300 LT being the most frequent. These fronts are stronger than those observed at the ancillary site which is located further inland from the Galveston Bay, including larger changes in surface temperature, moisture, and wind speed. Furthermore, these fronts trigger boundary layer updrafts, likely promoting isolated convective precipitating cores that are short lived (average convective lifetime of 63 min) and slow moving (average propagation speed of 5 m s −1 ), primarily within 20–40 km from the coast.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Lake Huron Enhances Snowfall Downwind of Lake Erie: A Modeling Study of the 2010 New Year’s Lake Effect Snowfall Event

In the Northeast and Great Lakes regions of the United States, the influence of multiple lakes on the overlying air can greatly affect lake-effect snowfall over downwind communities. To assess the impact of Lake Huron on snowfall downwind of Lake Erie, we simulated a lake-effect snow event which occurred from 1 to 6 January 2010 using the Regional Atmospheric Modeling System (RAMS). We found that the presence of Lake Huron enhances snowfall downwind of Lake Erie by almost 20% and leads to much heavier local snowfall totals than when Lake Huron is not present. This increase in snowfall is due to a lake-to-lake (L2L) convective band, as secondary circulations associated with lake-effect convection form over Lake Huron and persist overland between the lakes before reintensifying over Lake Erie. As these secondary circulations move over Lake Erie, lifting within the upward branch of the circulations accelerates the development of convection within the L2L band. Surface fluxes and convection over Lake Huron deepen the boundary layer, promoting deeper vertical development of this L2L band over Lake Erie. However, although this boundary layer modification strengthens the L2L band, we found that it actually reduced lake-effect snowfall produced by wind-parallel bands (WPB) in other parts of the lake. This indicates that boundary layer modification from upstream lakes may impact L2L bands differently than WPB which are not connected to upstream secondary circulations.

Lake effects↗
DOE OSTI2023

Particulate mass migration and mixing in cylindrically contained explosions

Abstract To explore particulate movement near the plasma of chemical explosions, rugged tracer particles were placed within and on the exterior of metal charges and electrically detonated. The particles were collected on/in the porous walls of plastic cylinders at diameters that correlated to the plasma width during different phases of the explosion. The particles’ positions were determined by Boolean logic analysis of their luminescent intensity. The cylinders which caught particles from the initial phases of the explosion retained placement information, while wider cylinders showed uniform mixing. These results/analysis methodology can help improve the understanding of particulate mixing in harsh environments. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Ignition and Growth Concept: The πSURF Perspective. Preliminary document

The ignition and growth reactive burn models used in the most generally-used hydrocodes (Pagosa, CTH, ALE3D, etc.) originate from the same basic idea: reactive burn results from distinct contributions from ignition of hot-spots and growth of reaction (deflagration) from the hot spots. We focus here on reviewing the development of the scaling relationship from the SURF perspective, and we emphasize that we are reviewing the ideas of Menikoff and Shaw from our own perspective in the context of developing the pSURF model.

42 ENGINEERING↗
DOE OSTI2021

Multiscale Patterning from Competing Interactions and Length Scales

We live in an era of complexity marked by impressive new tools powering the scientific method to accelerate discovery, prediction, and control of increasingly complex systems. In common with many disciplines and societal challenges and opportunities, materials and condensed matter sciences are beneficiaries. The volume and fidelity of experimental, computational, and visualization data available, and tools to rapidly interpret them, are remarkable. Conceptual frameworks, including multiscale, multiphysics modeling of this complexity, are fueled by the data and, in turn, guide directions for future experimental and computational strategies. In this spirit, we discuss the importance of competing interactions, length scales, and constraints as pervasive sources of spatio-temporal complexity. We use representative examples drawn from materials and condensed matter, including the important role of elasticity in some technologically important quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fundamental Mechanisms Controlling Dislocation-Obstacle Interactions in Metals and Alloys

This project combined modeling and experimentation across micro-meso-macro length scales to investigate the role of long-range internal stresses associated with obstacles and dislocation populations, in the deformation response of cubic metals. In addition to unique insights into the physical behavior of metals, advances were also made in modeling techniques and tools at the meso and atomistic level, and new characterization methods were developed and disseminated to the scientific community. Twenty eight journal papers, two dissertations and three theses have served as vehicles to share the gained scientific knowledge, and two opensource software packages have been developed, maintained and distributed. Additional publications are in progress.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optical control of orbital magnetism in magic angle twisted bilayer graphene

Flat bands in graphene-based moiré structures host a wide range of emerging strongly correlated and topological phenomena. Optically probing and controlling them can reveal important information such as symmetry and dynamics, but have so far been challenging due to the small energy gap compared to optical wavelengths. Here, we report near infrared optical control of orbital magnetism and associated anomalous Hall effects (AHE) in a magic angle twisted bilayer graphene (MATBG) on monolayer WSe$_2$ device. We show that the properties of the AHE, such as hysteresis and amplitude, can be controlled by light near integer moiré fillings, where spontaneous ferromagnetism exists. By modulating the light helicity, we observe periodic modulation of the transverse resistance in a wide range of fillings, indicating light induced orbital magnetization through a large inverse Faraday effect. At the transition between metallic and AHE regimes, we also reveal large and random switching of the Hall resistivity, which are attributed to optical control of percolating cluster of magnetic domains. Our results open the door to optical manipulation of correlation and topology in MATBG and related structures.

FOS: Physical sciences↗
DOE OSTI2025

Terahertz Landau level spectroscopy of Dirac fermions in millimeter-scale twisted bilayer graphene

Exotic electronic physics including correlated insulating states and fractional Chern insulators have been observed in twisted bilayer graphene in a magnetic field when the Fermi velocity vanishes, however a question remains as to the stability of these states which is controlled by the gap to the first excited state. Free-space terahertz magneto-optics can directly probe the gap to charge excitations which bounds the stability of electronic states, but this measurement has thus-far been inaccessible due to the micron size of twisted bilayer graphene samples, while the wavelength of terahertz light is up to a millimeter. Here we leverage advances in fabrication to create twisted bilayer graphene samples over 5 mm x 5 mm in size with a uniform twist angle and study the magnetic field dependence of the cyclotron resonance by a complex Faraday rotation experiment in p-doped large angle twisted bilayer graphene. These measurements directly probe charge excitations in inter-Landau level transitions and determine the Fermi velocity as a function of twist angle.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetization Dependent In-plane Anomalous Hall Effect in a Low-dimensional System

Anomalous Hall Effect (AHE) response in magnetic systems is typically proportional to an out-of-plane magnetization component because of the restriction imposed by system symmetries, which demands that the magnetization, applied electric field, and induced Hall current are mutually orthogonal to each other. Here, we report experimental realization of an unconventional form of AHE in a low-dimensional heterostructure, wherein the Hall response is not only proportional to the out-of-plane magnetization component but also to the in-plane magnetization component. By interfacing a low-symmetry topological semimetal (TaIrTe4) with the ferromagnetic insulator (Cr2Ge2Te6), we create a low-dimensional magnetic system, where only one mirror symmetry is preserved. We show that as long as the magnetization has a finite component in the mirror plane, this last mirror symmetry is broken, allowing the emergence of an AHE signal proportional to in-plane magnetization. Our experiments, conducted on multiple devices, reveal a gate-voltage-dependent AHE response, suggesting that the underlying mechanisms responsible for the Hall effect in our system can be tuned via electrostatic gating. A minimal microscopic model constrained by the symmetry of the heterostructure shows that both interfacial spin-orbit coupling and time-reversal symmetry breaking via the exchange interaction from magnetization are responsible for the emergence of the in-plane AHE. Our work highlights the importance of system symmetries and exchange interaction in low-dimensional heterostructures for designing novel and tunable Hall effects in layered quantum systems.

FOS: Physical sciences↗
DOE OSTI2025

Glassy interphases reinforce elastomeric nanocomposites by enhancing percolation-driven volume expansion under strain

For nearly a century, introduction of nanoparticles to elastomers has yielded extraordinarily tough nanocomposites that are critical to technologies from actuators to tires. The mechanisms by which this reinforcement occurs have nevertheless remained a central open question in material science. One widely debated hypothesis posits that strong interactions between polymer and particles induce "glassy bridges" that cement particles into a cohesive percolating network that resists elongation. Here, molecular dynamics simulations show that glassy particle shells do not primarily provide elongational cohesion. Instead, they amplify an underlying mechanism wherein competition between filler and elastomer networks causes the elastomer's volume to increase on deformation. This induces contributions from the elastomer's bulk modulus, which is of order 1000 times larger than its Young's modulus. These findings establish a unified understanding of low-strain reinforcement in filled elastomers as emanating from volumetric competition between coexisting particulate and elastomeric networks. This reframes and unifies our understanding of low-strain reinforcement, provides a clear-cut diagnostic for the presence of glassy bridging, and offers a new design principle for tough elastomeric nanocomposites.

Computational Physics (physics.comp-ph)↗
DOE OSTI2026

Mechanism-Resolved PFM of Ferroionic and Ferroelectric Responses in Thickness-Gradient Hf 0.5 Zr 0.5 O 2 Libraries

Resolving growth mechanisms and thickness evolution of functional properties is one of the key tasks in materials discovery and optimization involving thin-film materials, traditionally requiring significant experimental budgets. Here we introduce the combination of thickness-gradient libraries and automated scanning probe microscopy as a systematic pathway to elucidate growth modes and disentangle ferroelectric and electrochemical contributions in ferroelectric thin films. As a model system, we explore the Hf 0.5 Zr 0.5 O 2 (HZO) gradient thin films grown on La x Sr 1-x MnO 3 (LSMO) bottom electrode thin films. Automated piezoresponse force microscopy, spectroscopy, and lithography reveals that irreversible topographic deformation arises from electrochemical activity at the LSMO surface, whereas reversible phase inversion in HZO reflects ferroelectric switching. Automated topography height-map scans are used to further quantify nucleation density, particle-size evolution, and roughness correlations across the thickness-gradient, demonstrating that improved plume stabilization during growth suppresses interfacial reactions and promotes dense, fine-grained HZO conducive to ferroelectric phase formation. This combined materials-engineering and automated-SPM framework establishes a platform for high-throughput, mechanism-resolved characterization of ferroionic and ferroelectric responses in complex oxide films.

FOS: Physical sciences↗
DOE OSTI2026

Disentangling High Harmonic Generation from Surface and Bulk States of a Topological Insulator

The discovery of topological phases has introduced a new dimension to materials science. Three-dimensional (3D) topological insulators (TIs) are a remarkable class of matter that is insulating in the bulk while hosting conductive topological surface states (TSSs) with unique charge and spin properties. High-order harmonic generation (HHG) has emerged as a powerful tool to probe condensed matter systems by providing insights into their electronic structure and dynamic behavior. Here, we investigate HHG in the prototype 3D-TI Bi$_2$Se$_3$. We demonstrate that the contributions of bulk and surface states to the harmonic emission can be controlled by tuning the thickness of thin film samples. An ultrathin (6 nm) film substantially enhances HHG from the surface states, while the bulk states dominate HHG in a thicker (50 nm) film. By applying a quasi-static terahertz perturbing field, we disentangle the bulk and surface responses and reveal the significant impact of the surface states' shift vector and Berry curvature on HHG. Our study provides effective methods for isolating the optical responses of TSSs from those of the bulk, which opens the door to resolving an ongoing debate regarding whether it is possible to reliably extract topological signatures in HHG.

Atomic Physics (physics.atom-ph)↗
DOE OSTI2022

Scientific challenges to characterizing the wind resource in the marine atmospheric boundary layer

Abstract. With the increasing level of offshore wind energy investment, it is correspondingly important to be able to accurately characterize the wind resource in terms of energy potential as well as operating conditions affecting wind plant performance, maintenance, and lifespan. Accurate resource assessment at a particular site supports investment decisions. Following construction, accurate wind forecasts are needed to support efficient power markets and integration of wind power with the electrical grid. To optimize the design of wind turbines, it is necessary to accurately describe the environmental characteristics, such as precipitation and waves, that erode turbine surfaces and generate structural loads as a complicated response to the combined impact of shear, atmospheric turbulence, and wave stresses. Despite recent considerable progress both in improvements to numerical weather prediction models and in coupling these models to turbulent flows within wind plants, major challenges remain, especially in the offshore environment. Accurately simulating the interactions among winds, waves, wakes, and their structural interactions with offshore wind turbines requires accounting for spatial (and associated temporal) scales from O(1 m) to O(100 km). Computing capabilities for the foreseeable future will not be able to resolve all of these scales simultaneously, necessitating continuing improvement in subgrid-scale parameterizations within highly nonlinear models. In addition, observations to constrain and validate these models, especially in the rotor-swept area of turbines over the ocean, remains largely absent. Thus, gaining sufficient understanding of the physics of atmospheric flow within and around wind plants remains one of the grand challenges of wind energy, particularly in the offshore environment. This paper provides a review of prominent scientific challenges to characterizing the offshore wind resource using as examples phenomena that occur in the rapidly developing wind energy areas off the United States. Such phenomena include horizontal temperature gradients that lead to strong vertical stratification; consequent features such as low-level jets and internal boundary layers; highly nonstationary conditions, which occur with both extratropical storms (e.g., nor'easters) and tropical storms; air–sea interaction, including deformation of conventional wind profiles by the wave boundary layer; and precipitation with its contributions to leading-edge erosion of wind turbine blades. The paper also describes the current state of modeling and observations in the marine atmospheric boundary layer and provides specific recommendations for filling key current knowledge gaps.

17 WIND ENERGY↗
DOE OSTI2021

AOT_data_repo

Data repo for ocean test case testing new data assimilation algorithm in an idealized setting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Input files and WRF run directory for a LASSO-CACTI simulation

Tar file containing files necessary for reproducing a given Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m for convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. Types of files in this tar include the initial and boundary conditions, WRF namelist, and other files present in a WRF run directory.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Raw WRF model output files from a LASSO-CACTI simulation

The raw model output from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. The raw model output is in netCDF format as output by the WRF model, i.e., the “wrfout” files, with the files renamed for archival purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

WRF restart files for a LASSO-CACTI simulation

The restart files from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. Restarts are available for the LES domains, i.e., d3 and d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. The restart files are output every 30 minutes in netCDF format as output by the WRF model, i.e., the “wrfrst” files, with the files renamed for archival purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Subsetted model output for aerosol-related variables from a LASSO-CACTI WRF simulation

Aerosol-related model output from a Weather Research and Forecasting (WRF) simulation from the Large-Eddy Simulation (LES) Atmospheric Radiation Measurement (ARM) Symbiotic Simulation and Observation (LASSO) deep-convection scenario for the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. The LASSO-CACTI simulations span grid spacings from 7.5 km to 100 m through the use of four nested domains, labeled d1 through d4. The simulations are of convection near the Sierras de Córdoba mountain range, roughly centered on the ARM Mobile Facility. More information can be found at https://www.arm.gov/capabilities/modeling/lasso. This version of the output is a collection of variables subsetted from the raw WRF output to reduce the file overhead for users not needing the full raw dataset. The subset files are in netCDF format with the height-based variables on the raw, model eta levels. The aerosol properties are consistent with the Thompson aerosol-aware cloud microphysics scheme where the simulated aerosol are proxies for representative “water friendly” and “ice friendly” aerosol.

54 ENVIRONMENTAL SCIENCES↗